Redirect Ports problem

I have a WRT54GS router and I'm trying to forward ports. When I'm the screen forward port on the router, I enter in the ports, try to click on the "Activate" box and get the following message:

'You cannot use the IP of the router, the network or the Boroadcast address' and therefore, they don' tregister/save.

No idea why this is?

Thank you

Dave

So much worse... got it! Thank you!!

Tags: Linksys Routers

Similar Questions

  • WRT320N - loss of internet connection after redirect port 80 and 443

    Hello

    I have a problem with my new WRT320N. When I activate the port forwarding on my local server (ports 80 and 443), after a while I completely lose internet connection on all my computers connected to the router (wifi and lan computers). The router itself can ping and trace any Internet site through diagnostics to Web administration. When I turn off and click on save changes button, my internet connection works immediately again. I have the latest firmware installed and I tried to reset the router several times and set it manually since the beginning.

    My previously detained WRP400 has been configured to redirect these exactly the same ports and everything worked perfectly. Could someone advise me where could be a mistake? Thank you.

    I solved it. There was a problem with the combination of the service 'DHCP Reservation"of the router and client DHCP of Ubuntu. I disabled "Booking DHCP" and set the IP settings manually in the Ubuntu computer and now it works perfectly

  • Urgent - NAC + ACS + Web-Auth in Wired environment - https redirection - certificate problem

    Hello world.

    I'm seting of an environment that uses Web-Auth for my cable and wireless. I followed the exact steps in this page of Cisco to run:

    http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6638/app_note_c27-577490.html

    I'm only testing environment wired right now.

    I plug a PC on a port, and I try to access a Web page of randon (for example, www.cisco.com). It is automatically redirected to the authentication page. I type the user name and password, but when authentication is successful, it goes automatically to the https version of the page, which brings me to the problem. I should add an exception (more on this option on the IE Web page) to this page to continue with the authentication and gain access to the internet. I enclose the steps I must perform:

    I think that it is linked to the certificate, but I'm not sure who or where. I would like to get some advice on your part to avoid this problem. I have no intention to buy all certificates, so if I could jump the https would be great.

    Thanks a lot for your help

    Victor Alves

    If you don't want an official cert, you must go to http only. But this means that people paswords will transit in the clear on the network.

    It's been long that I tried, but not is not remove 'ip http-server secure' do the trick?

  • Configuration of Apache by default port problem.

    Hi Experts,

    Today, I met a working port of apache configuration.

    My scenario:

    I have a domain with a managed server (both on the same machine) and also, I have configured apache server using code below,

    < location / >

    SetHandler weblogic-Manager

    WebLogicHost 192.0.0.1

    7005 WeblogicPort

    < / location >

    The application runs on port 80 by default. Thus, when the user access to the DNS means www.support.com (example) means that it redirected to the 192.0.0.1. Then user acesss the homepage of the

    request. So far no problem.

    My requirement is, if the user accessing the DNS also redirected www.support1.com(another one) to the 192.0.0.1 and also access home page of the application itself. But what I want is, need for the user to access the specific page (example: billing page) in the application, not the home page.

    I don't want to set up separate port (apache level) and separate the IP (DNS level) for the www.support1.com.

    I tried to write the virtual host inside of this I used the name of the server, but it does not work.

    Can I write the IF ELSE condition in the httpd.conf file as if your access from the ww.support.com go to this URL to go to that URL (billing page)

    Please share your expert suggestions.

    Kind regards

    Simo.

    Hello

    Try to change the rule for this:

    RewriteRule ^ / $ /faces/NewCustRegisteration.jspx [R, L]

    Your original rule was rewriting / / also, so no rewrite real does.

  • Oracle Forms / Reports port problem

    Hello

    I installed Oracle 11 GR 2 reports of forms of Oracle 11 g with Weblogic 10.3.2 on a windows 2008 R2 (64-bit) server and a server.
    Everything works fine, but I am facing a problem with the reports.

    I run the application forms report, my request is from this URL: http://ntexport2k8t1:9001/forms/frmservlet? config = test
    I am able to access report break from this URL: http://ntexport2k8t1:9002 / reports/rwservlet/showjobs?

    After running the report, the new page is: http://ntexport2k8t1:9001 / reports/rwservlet/getjobid16? Server = rep_wls_reports_ntexport2k8t1_formsreports
    But this page does not exist:
    Error 404 - not found

    If I change the port number of 9001, 9002, my PDF report is displayed correctly.

    http://ntexport2k8t1:9002 / reports/rwservlet/getjobid16? Server = rep_wls_reports_ntexport2k8t1_formsreports

    How can I redirect the output of report to the port 9001?
    I tried to change the listening port of 9001 9002 report but it does not work.

    Can someone help me?

    Thank you.
    (Sorry for my bad English).

    Thomas.

    I also thought it was IPv6 but this should be fixed in 11.1.1.3 (more I disabled IPv6 on my server).

    There are some Metalink notes with different causes of this behavior and all lead to the same solution: change the hostname with the IP address :).

    Another option might be to create an entry in the hosts file located in

    %WINDIR%\system32\drivers\etc\hosts 
    

    with the host name and ip address of your server (if it is still allowed in current versions of windows)... I didn't try, but it might work as well.

    see you soon

  • charge port problem

    Hey guys I use an Iphone 5 16 GB and, recently, I found that my charger is not working properly so I change the cable and the problem is still there.

    My iphone does not load, BUT when I put a small piece of paper or something like that under the "cable plug" (sorry I don't know what to call it) and it works perfectly.

    So my question is: is it possible to fix this? Or can I replace the charger port?

    Hello, it seems that your charger port is broke off or a cable lost the appropriate connection. Your charger to another iPhone, try to find what is the problem. If it works fine with another iPhone, which means that your device needs to fix the charger port. In this case, it is best to take it to the service of Apple.

  • Bluetooth Windows 7 USB port problem

    Hello

    I use a bluetooth class 1 dongle (manufacturer unknown) with the V 8.00.03 Premium toshiba bluetooth stack and a bluetooth headset. The specifications for the dongle are: Bluetooth V1.2, compatible USB V1.2/2.0

    I have a strange problem when changing the USB dongle is plugged. If I change the dongle on another USB port, searching for devices fails. I tried to uninstall the battery and of course remove device from the bluetooth Manager window.

    Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

    I want to change the USB port so that I can get the best reception, like its plugged in to the back at the moment. Also, I want to use the usb expansion for the same reason, to bring out above the office. Oddly, if, as I say, it does not work with the extension (just a regular cable with USB male on one end and female on the other to plug the dongle in.)

    Is this something to do with voltage drop down a cable? And regarding the change of the ports usb is it something to do with ports being installed on this USB port bluetooth only? I don't know exactly how ports bluetooth works, how they settle etc.

    Thanks much for any help.

    Hello

    > Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

    I think you're wrong here buddy
    If you use another manufacturer's computer, and if you have problems using it, you should check the page of computer manufacturing support.

    In my opinion the question isn t linked to Toshiba BT stack but to the USB ports on your computer.

  • based on the redirection port has stopped working after the upgrade of Capitan 10.11.3

    I have a web service running on a VM (virtualbox VM), which I can access on my mac via 192.168.99.100:8000. The mac itself is tuned to 192.168.1.2. To port 8000, I set up a redirect on the server (Server version 5.0.15 OSX) Web sites pointing to 192.168.99.100:8000. It works, as long as the conscripts of the Mac (even when called from another virtual machine on this mac).

    However, redirection fails when you try to access from other computers within the 192.168.x.y space, or when it is called from the internet.

    ... I add a few comments on what has been checked so far:

    -port 8000 is open to the router

    -OSX El Capitan (10.11.3) firewall application is disabled in system preferences

    -OSX Firewall adaptive server is disabled (using sudo /Applications/Server.app/Contents/ServerRoot/usr/libexec/afctl - X)

    -by checking port 8000 canyouseeme.org it is recognized as open

    ... still, the request never machine made...

  • Redirection Adware problem

    I am new user of MacBook (less than 24 hours) and already makes it painful to use because someone told me there is no virus for Mac, I was carelessly downloading of programs and I am here... My browsers (Chrome and Safari) are double tabs, we repeat just what is already open, and a other advertising. Also, I got pop ups and ads around some sites like imdb or other trusted sites. Now it's better, maybe because I've done a few things to try to remove this, but the redirect is still a huge problem. Here is the results of my diagnosis, I hope someone can help

    Boot Mode: Normal

    Model: MacBookAir7, 2

    The System Diagnostics

    2016-01-20 com.purevpn.macapp crash

    2016-01-20 com.purevpn.macapp crash

    2016-01-20 com.purevpn.macapp crash

    2016-01-20 com.purevpn.macapp crash

    2016-01-20 com.purevpn.macapp crash

    Diagnosis of the user

    2016-01-20 PureVPN crash

    2016-01-20 storeassetd crash

    Accident activity Monitor 2016-01-21

    2016 01-21 SystemUIServer crash

    Kernel messages

    January 20 09:39:44 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

    January 20 09:39:50 [IGPU] Planner gas CAP = 100ms.

    Jan 20 16:21:06 excessive release of assertions about the importance of the inner core for pid 701 (storeassetd), let fall 1 assertions, but the task only has 59 remaining (59 external).

    20 January 23:11:01 hfs: mounted PopcornTime on disk2s2 of the device

    20 January 23:18:50 hfs: disassemble insiders on PopcornTime on disk2s2 of device

    20 January 23:38:36 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

    20 January 23:38:37 [IGPU] Planner gas CAP = 100ms.

    Jan 21 00:30:33 launchd process [1]-l' system of limitation of disabling i/o level

    Jan 21 00:30:33 launchd process [1] disable the CPU - the system-wide limit

    Jan 21 00:30:48 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

    Jan 21 00:30:49 [IGPU] Planner gas CAP is 100ms.

    21 Jan 01:15:31 launchd process [1]-l' system of limitation of disabling i/o level

    21 Jan 01:15:31 launchd process [1] disable the CPU - the system-wide limit

    21 Jan 01:15:45 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

    21 Jan 01:15:46 [IGPU] Planner gas CAP is 100ms.

    Extrinsic demons

    com.purevpn.MacApp

    com.Adobe.fpsaud

    Extrinsic agents

    com ShopTool.agent

    com SoftwareUpdater.agent

    com.google.Keystone.User.agent

    launchd items

    / Library/LaunchAgents/com. ShopTool.agent.plist

    (ShopTool.agent com)

    / Library/LaunchAgents/com. SoftwareUpdater.agent.plist

    (SoftwareUpdater.agent com)

    /Library/LaunchDaemons/com.Adobe.fpsaud.plist

    (com.adobe.fpsaud)

    /Library/LaunchDaemons/com.purevpn.MacApp.plist

    (com.purevpn.macapp)

    Library/LaunchAgents/com.google.keystone.agent.plist

    (com.google.keystone.user.agent)

    Com/library/LaunchAgents. ShopTool.agent.plist

    (ShopTool.agent com)

    Com/library/LaunchAgents. SoftwareUpdater.agent.plist

    (SoftwareUpdater.agent com)

    Extrinsic loadable bundles

    / / Library/Internet Plug-Ins/Flash Player.plugin

    (com.macromedia.Flash Player.plugin)

    / Library/PreferencePanes/Flash Player.prefPane

    (com.adobe.flashplayerpreferences)

    Proxies

    ProxyAutoConfigEnable: 0

    ProxyAutoDiscoveryEnable: 0

    DNS (for not)

    no DHCP): 8.8.8.8

    Profiles: 1

    Restricted user files: 6

    Time elapsed (s): 92

    Click here and follow the instructions, or if it is not a type of adware is covered by them on the computer, these. If you would rather not remove it manually, you can run rather MalwareBytes for Mac.

    MalwareBytes is a removal tool and does not stop adware or other malware from entering the computer. What said you is true that viruses are concerned, but does not apply to other types of malware. For effective protection, do not download software from sources other than the Mac App Store or Developer Web sites.

    (138614)

  • On Satellite Pro A300-13Y USB port problem

    I have a Satellite Pro A300-13Y with 4 USB ports. The USB ports of two right don t work. I bought this phone recently (2-3 weeks ago). It has a Windows Vista Business SP1 on it. I put chip in utility installed on it, I checked the Device Manager and tried to find driver for it but I couldn't solve this problem.

    So I called Toshiba service dek, they say that I need to install new standard to factory install to see if it can be solved. But I don t find it the best way and I have some applications installed on it and get some info on my laptop, so I would find another way to solve this problem.

    Also, I think it might be a hardware problem. Can someone show the way in which I can find or fix this? I can also send it to guarantee, but I made a mistake and if there is not a hardware problem that I have to pay for it.

    Hello

    I know it s not the best way, but it's the only way to exclude a hardware failure. If after a recovery of the won´t of USB ports not work then you can send it to repair without being in doubt that they will charge you for the repair.

    Welcome them

  • Material RANE/Serato SL2 SL3 SL4 Core Audio Port problem with El Capitan

    Hi Apple,

    I and many others have had problems when using devices with Rane Serato DJ software where the breaks down of software, nor will we get audio drop-outs and crashes.
    (Audio Interface) device that I use is RANE SL3.

    MacBook Pro (retina, 13 inches, end of 2013)

    Version: 10.11.2 (15 c 50)

    Intel Core i7 2.8 GHz

    16 GB 1600 MHz DDR3

    Iris 1536 MB Intel

    1 TB SSD

    Serato have updated their software (1.8.1) to take in charge the last OX El Capitan (10.11.2) and announced that the problem is with the drivers of RANE and Serato not.

    See Site for more information: https://support.serato.com/hc/en-us/articles/213821528

    RANE said its now a problem with Apple and is a Port Audio problem. Please see their announcement about the update of BEEF: http://dj.rane.com/support/knowledge-base/el-capitan-update

    This is the Forum for discussion with RANE, saying they are awaiting your response on fixing this problem.

    here: http://dj.rane.com/support/knowledge-base/el-capitan-update

    Rane suggested only that downgrade us our BONES to the Mavericks or Yosemite. This should not be the case!

    We need answers, and for not having spent somebody else as everyone pushes the blame.

    Please you can find what the solution is rather then downgraded to a previous operating system. It's a very frustrating with all the people who spent loads of money on a Macbook and RANE hardware especially this time of the year where we DJs play every weekend like our jobs.

    Hope this gets sorted soon
    Concerning
    Anthony

    This is a user forum. While we, users can sympathize, is not in our power to resolve this issue if it's a bug.

    To allow Apple to know of this problem, you must use the appropriate feedback chanel.

    http://www.Apple.com/feedback/

  • Visa set up serial port problem

    Hi all

    I use the RS-232 port to communicate with the instrument. At the moment the device is not their so I shorted pins 2 and 3 of the connector connected to the COM2 port, so that what ever I'm transmitting, I I'll be back. Using Hyperterminal I am able to verify that whatever i write, he's coming back.

    But when you use a Labview 7.1 I am tring to connect first by configuring the using VISA CONFIGURE SERIAL PORT.vi serial bus

    with the following parameters

    Visa resource name = ASRL2::INSTR (port COM2 because)

    Baud rate = 2400

    Data bits = 8

    Parity = None

    Stop bits = 1.0(Equal to 10)

    Flow control = None

    End of reading at the end of character = True

    Dismissal = A

    Up VISA is in error. The error code is 1073807202

    The procedure described above is similar in the read/write of Visa examples provided...

    I strive to solve the problem but all invain.

    Can anyone help me in this.

    See here

    I guess your problem is #2 (you have not installed OR visa).

  • Serial Port problems - carriage return and use as an executable file

    Hello

    I developed an application to send a few simple commands on the serial port and read the corresponding answers of a device that I am in communication with.  I have been using logical Port to watch the line TX of the serial port.

    By using the Visa configure Serial Port I set the stop character property allow true and used the hexadecimal value D trying to make the termination a carriage return characters.  When I sent the order, I'll send the cmd followed by Enter.  No matter if this property is set to true or the hexadecimal value is set to D for carriage return or line break is, the serial port would always send a line break.

    Then I got crafty and the string constant under normal display to hexadecimal display.  The ONLY way I could send a carriage return was manually putting 0x0D after ordering.  So my question is, why the Visa set up the Serial Port is not working correctly, and is there a better way to send a carriage return?

    My next issue is facing the construction of executable files.  I'm using LabVIEW 8.2 and wrote this program for another employee to use on his laptop computer.  I did install runtime Labview 8.2 and led to the executable that I generated.  I did-> the executable by clicking Tools build the executable.  The problem I noticed was that the executable would open and will work perfectly, but it would not send any data the serial port.  I then ran the executable on my laptop (which contains the full version of LabVIEW 8.2) and the serial port has worked well.  I guess my question is... Are there plug-ins that must be installed to use the serial port with the Labview runtime engine?  Or y at - it a step that I failed to do?

    Thank you

    Gary Still

    Not immerse in the first issue. The Knight will probably be galloping until shortly.

    For your second question, after building the executable, you must build the installer and includes support for the VISA. VISA is required for serial communication, and it does not accept American Express.

    It may be useful

    -AK2DM

  • W510 usb ports problem

    Hi all

    I have a W510 machine which has 4 usb ports, including 2 3.0 ones (blue marker), 1 still active (marked in yellow) and usb-eSata port a combo. They are all works well with data transfer, but I'm not sure that they do with the power supply matter. The use of two 3.0 ports seem to feed all the time, except when the laptop is turned off (say, my short of cooler for laptop when the thinkpad goes into mode 'sleep'; or I can easily wake up my pc by moving my mouse that is connected to one of the two ports 3.0)

    The combined port seems very well, his power goes off mode "Eve" (cooler stops working when it is connected to it)

    Always on that seems odd. Power goes off like the combo, but if I plug it into a something like the receiver of my mouse wireless, the machine does not start in the next boot.

    Does anyone have problems like mine?

    Hello partner,

    Try to check in the BIOS if the always on udb is activated and in the boot order if usb is not first otherwise u may have problems to start with something to plug...

  • Parallel Port problem

    We used the kind of software that uses a key lock (which is connected to the parallel port), we have added new machines in our Mt. HP3330 company, i.e, who doesn't have a parallel port on the motherboard. The problem starts here, even after installing Add on parallel port & required installation driver, after the execution of programs, it gives an error not found "Key lock". This problem can be solved using the USB parallel port?

    Even after that the installation of the Add on parallel port & installation required pilot, after execution of programs, it gives an error "Key lock" not found

    You mean you bought a discreet the snap card to provide a parallel port?

    Check Device Manager for parallel ports that are available on your PC and what is their status...

    • Click Start
    • Click on run
    • Type devmgmt.msc and press enter
    • Enlarge (click on +) Ports (COM & LPT) section

    Please answer with the information on your parallel port (printer). Is there more than one?

    If there is that this means that even though there may be no physical outlet, your motherboard has the ability to add another via a ribbon cable.

    If this is the case there are two options...

    1. Configure your software to use the new (LPT2 probably) LPT port not LPT1.
    2. Remove the add-in and replace a cable sheet of the motherboard to a backplate with a parallel decision-making. You should be able to buy this th same place you bought the card.

    Tricky

    EDIT: 3rd option if you have 2 LPT ports: disable the port of the motherboard in the BIOS, uninstalling the card and its drivers. Re-install add it in card and should be LPT1.

Maybe you are looking for

  • VAT/taxes on iTunes Movies

    Hello.  I sell a movie using iTunes in some regions such as the Ireland, United Kingdom, Australia and New Zealand.  ITunes collect and pay applicable taxes in each region?

  • Portege Z930 - need to Win8 driver for Ericcson 3 G

    I've updated my Toshiba portege Windows 8, and everything works fine, except the Ericcson G 3, I think and it doesn't work,What should I do? Thanks in advance

  • Import a txt in report file

    I have a signal Arinc I decoded in each of its inputs/outputs digital.  Since I was more than 150 e / s, I needed a way to sort and make a quick report on them. I have three categories. 1. remained = 1 throughout the test 2 sleep = 0 throughout the t

  • Cannot disable firewall to download Adobe Flash Player.

    Original title: I can not turn off my fire wall I'm turning my mcafee firewall, so I went to my control panel and clicked on the security systems and then tried clicking on turning off windows firewall and nothing open or nothing happened, so I could

  • I try to print a file that has been sent by email

    Receive emails with attached files and get "your security settings do not allow this file to download.  I try to print it.  Can anyone help please?