Redirect the problem - computer laptop display tablet version instead of the version of office

Similar Questions

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• Computer laptop 32 bit Vista will not shareprint with XP Office officejet v40 printer. Help, please

  I have read forums and tried everything for 4 days without luck.

  I'm trying to print from my 32-bit vista laptop to my printer of office xp... an old officejet v40 printer.

  The office prints well on this printer from xp desktop attached and I named shared printer.  All security and firewall disabled. I started at least 20 times and have tried to install unsuccessfully

  It seems that the HP driver Web page has a driver for vista, BUT the instructions are only if you hang the printer directly with the USB... No shared networking. I always thought that you could just download the dirver to the computer and it turns when you go to install it. I made for the devil to the hook to the top of my computer vista laptop directly to the printer and it installs and works fine... BUT I want it in a network or shared... no USB.

  Also, if I go to "Add a network printer" and select the printer in office shared in the list, it will be in my control panel as a printer on my laptop, but when I hit print, I get the pop box, which allows you to set the preferences, print etc, and when I hit print again, the small pop-up box flashes on for a second that it's printing paper... but no printing. Instead of this, when go to see what happened to the list of document status, I see the State of the document listed as error - printing"

  I don't know if I have vista for this printer driver in my laptop or what? I'm totally confused by the present. I read somewhere that there is no way for a computer vista laptop to print over the network to this HP printer while the printer is connected directly to a computer running XP? Is this true?

  I rarely if ever gave to be beaten by computer problems... but this one had me done bankruptcy for the third time and about to give up. Any help would be appreciated.

  THIS TIME IT WORKED! After several months of not being able to print from my computer vista laptop for my v40 OfficeJet (which is connected to my desktop XP) I decided that I would give it one more try. I used once more Bob of the 2nd ad above, as well as suggesion Eddy's instructions to select "New Port" when you arrive at the end close to Bob's instructions. THIS TIME IT WORKED! I think I'm out track somewhere when I tried to do this several months ago. In any case, I thought that I have would expand a bit on what Bob wrote just in case there's someone that who needs a little more in detail. (For a beginner, even the smallest thing can be stumbling blocks if you have never done this kind of thing before)

  On your computer vista laptop, go to printers and Control Panel. When you click the Printers icon you can click on add printer and select Add local printer (it even if it is not a local printer, but a printer that is connected to your desktop computer in another room) Ok... Then select "Use the existing Port" LP1. Then you select your printer from the list and click on it to install the driver. I think that you then click FINISH. (No you are not really over, so don't bother is not clicking on this Test Page again). Once you click FINISH, you will automatically be on the screen that shows the printers you have installed on your laptop. for help. You will then see the the OfficeJet v40 as the printer that you just installed. Highlight and right click. Then select "Run as Administrator". That will open a submenu where you and then click Properties. Then click on Ports, Add Port. Select "Local Port" and click "New Port" (as Eddy proposed). A small screen will appear where you enter now the \\NameOfPrinterYouArePrintingTo\ShareNameOfThatPrinter once you do this and click on apply and OK, you will be brought to a final screen where you will notice that the box LP1 is more verified. Place a check mark was automatically placed in the new port that you just created above IE name\sharename.  YOUR DONE!

• Overheating problem - computer laptop sony vaio makes loud fan noise

  Original title: overheating problem.

  My computer sony vaio notebook makes noise noisy fan after that its used for half an hour and sometimes turns off. What is the cause and the cure for this problem. The model is a set of VPC E a little more than 3 years. Grateful for some answers or don't have these problems.

  Hello

  It may be an overheating problem and it is normally the main reason for your problem.

  .

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up.

  Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons for your problem:

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  See you soon.

• connection problem computer laptop bluetoothof for speakers Bose Soundlink Wireless Mobile

  Laptop is a Sony VAIO F Series

  Hello

  1. what operating system do you use?

  2. what exactly are you faced with the question?

  3. did you receive an error message?

  4. what exactly happens when you try to connect the Bluetooth device to the computer?

  I suggest you to follow the links and check out them.

  If you are using windows XP, follow the link and check.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

  If you are using windows vista, I suggest you follow the link and check.

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  For windows7, follow the link control.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

• computer laptop display on monitor Dell

  I have a U2410 monitor with a HP desktop computer. Also have a laptop Lenovo T520. I want to connect the laptop to the screen, so I can watch 24 inches instead of 15. I tried to connect the laptop to the display with a VGA cable, but nothing was detected. Try catalyst, but that didn't detect anything. Then I tried a Display Port cable. Nothing detected. So how can you get a computer screen on a Dell monitor? Desktop is Win 7. Laptop is Win 8.1.

  * Turn off the laptop
  * Disable the U2410
  * Install = portable output VGA--> VGA cable VGA--> U2410 VGA port
  * Turn on the laptop
  * Turn on the U2410
  * Press the U2410 button 3rd from the top, "Input Source Select.
  * Choose VGA
  * Go into the video settings of the laptop and activate the extended mode

• a computer laptop, internet is accessible only if proxyserver offline, my office internet is accessible with the proxy server. without him we cannot access the internet.

  I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?

  Hello

  Work on a domain environment?

  Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.

  If you are on a domain environment then please post the question on the link mentioned below using:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• 'Computer' window displays unique addresses instead of names assigned bluetooth bluetooth

  Hello
  When Bluetooth is activated on my laptop, I see unique addresses bluetooth (for example "11:A1:11:A1:11:A1") instead of bluetooth names affected particular bluetooth devices in the 'Computer' window, but I can't see the bluetooth assigned names for all bluetooth devices in the window "devices and printers". It's very awkward transfer files between my laptop and bluetooth devices.

  Note that all the drivers and applications are up to date. I don't use third-party tools for bluetooth. Is the problem to an existing bug in Windows 7? If not, then what to do?

  Thanks in advance.

  Hi Imran M.

  Thank you for your response.

  I deleted all of the computer and then them again paired bluetooth devices. But the same issue remained.

  However, I solved the problem by myself.

  Solution:
  1. I removed all devices from the computer.
  2. type "Regedit" in the Search box of the Start menu and opened it.
  3. delete all entries to:

  • [HKEY_CURRENT_USER\Software\Intel\Bluetooth\btmshell\DeviceType]
  • [HKEY_LOCAL_MACHINE\SOFTWARE\Intel\Bluetooth\FGMAP]

  4 then I matched all the devices again.

  Now I see bluetooth for all devices assigned names, both in the window of the computer and peripherals and printers .

  Thank you.

• Why my computer is displayed in pounds instead of dollars?

  Why my computer does not pounds instead of dollars?

  Hi Wilmakingston,

  Where exactly you are trying to change that? What program do you use?

  You can check in the settings of the program where you will be able to change the pound sign in dollar sign.

• Microphone does not work on my computer laptop gateway but works on my pc

  My computer laptop gateway continue giving message "no record ellee not office installed" but I can hear through my headphones, I can just talk through the microphone or recording the sound. Everything works on my pc

  Looks like your mic edge has been disabled somehow. You can call the gateway to see if there is a key combination to re - activate, or a way to re - activate in the Panel.

  Another way is to plug in a USB microphone or a USB Webcam with built in microphone...

• Hello, having real difficulties to display the versions Tablet and my Muse created the website on the phone and Tablet phone, everything indicates the desktop version. This is the second time Ive designed this site, after reading that redirect the links m

  Help with the help of Adobe Muse CC

  It may be little reason to do this, including links to page content or content used in the phone/tablet version.

  Please provide the url of the site, also try to publish the site as a place to test with all the layouts that would help to isolate the problem in Business Catalyst.

  Thank you

  Sanjit

• Problem with laptop 2 in 1 look at a site muse as tablet version

  Hello!

  Can someone tell me how to solve this problem, if it is posible? My client has a Dell Inspiron 13 7000 Series 2-in-1 computer laptop and the Web site I created in shows Muse it the tablet version, not the desktop version.

  Thank you!

  It actually has nothing to do with what you set in the Muse.

  Muse determines whether to load the computer desktop, tablet or phone based on the smallest dimension of the screen (horizontally or), and if the device supports multi touch. The size of the screen is measured in the browser "reference pixel" (the size of the screen returned by the browser, about 96ppi) and not the 200 + ppi the latest ultra high resolution poster.

  A device with a reference 960 pixels minimum screen size or less that has a multi touch screen is classified in tablet form (read iPad standard or smaller).

  A device with a screen size minimum of pixel reference 415 or less is classified as a phone (everything except the biggest phablets).

  A Dell Inspiron 13 7000 series 2-in-1 laptop has a display of 1920 x 1080 in terms physical pixels and a multi touch screen, so it should generally be classified in office.

  At least two different things could cause the tablet to load:

  (1) if the scaling of Windows display, is something else that 100%, then the dimensions of the screen reference pixel will be something different 1920 x 1080. For example, if the customer has display scaling set to 150%, so everything is a little bigger, then the actual size of the screen will be less and the actual height will be less than 960 so it would be classified as a tablet.

  (2) Windows 10 reports unexpected for the dimensions of the display values when the display scale is equal to or greater than 200%. We are still working on a solution for this. It seems likely to be the situation in this case and when this happens usually the pages loading, rather than office phone, but I am here just in case this site has no updates phone (because if there is no available phone presentation of the Tablet would be the load).

  For what is sensitive, that adobe announced support for the delicate design is under construction at the Conference from Adobe MAX in early October. The current beta versions include support for the delicate design. However, sensitive may not be a remedy for this situation. With reagent only design you for a width of the screen with much less thought to the device used by a visitor to the site. As the overlap between tablets and laptops and tablets and phones continues to fade, you're pretty much going to always have to design to reach all screen sizes and there will always be a group with between peripheral who feels that your design is "too compressed" or 'too much office' or 'too much phone' for any device they use.

  FOR INFO. Adobe Muse beta program is open to all active subscribers to Muse (via a subscription to creative cloud) that can accept the terms of the non-disclosure agreement. You can join by visiting http://museprerelease.com

• No display on the computer laptop satellite A60

  Hello

  I have a problem with a computer laptop a60 equim. the laptop has not been used much at all is more than 14 months old and has been sitting without use for a few months. now, when we try to put on we do not display or no sound at all hard drives etc. the light around the power button ilumintes and light for the sign of the battery also lights up the clique drive on as they do normally start upward and that lights up for a second. also, if I put the sector be able to drive in this sign shines to. but nothing appears on the screen.
  can someone help me please?

  Hi Lee,.

  Hard drive gives an indication of activity when you turn on your laptop? Normally the POST process will check for access to all known devices until the BIOS takes over.

  Kind regards

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• The program cannot start because LibMySQL.dll is missing on your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk.

  Original title: Mysql Libmysql Dll error correction

  The program cannot start because LibMySQL. dll is missing from your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk. LibMySQL. dll is C:\Windows\System32, but I can't run the .exe file, I want to run, I can to do, how to fix this problem automatically, I have Windows7 64-bit machine, computer laptop lenovo T530

  Thank you!

  I solved this problem, I put this file LibMySQL. dll to the folder where the .exe file is, I want to run. Exe file, I want to run, cannot call LibMySQL. DLL in C:\Windows\System32,that is the question, I found on a forum suggestion what I have to do