(Redirected) 32-bit to 64-bit problem!

Similar Questions

• Button Portege A600 - 133 Windows 7 64 bit problem

  After installing windows 7 64 bit on Portege A600-133, Toshiba or Toshiba Assist button a presenter button work. All other keys are working properly. How can I solve this problem?

  Hello

  Have you installed the latest VAP (value added package)?
  Toshiba page provides the last Win 7 VAP for A600 which is v1.2.40

  You use the latest version of the BIOS?
  Check it!

• Toshiba Satelite a300 Windows 7 32 bit problem with music keys

  Hi, I just installed Windows 7 (32 bit) and I have a problem with the music keys. I can't find driver for it even on the toshiba official site. I had been looking in this and many other forums, but no answers have been good enough to solve my problem. "I've been to the installation of several ' for sure the work drivers" and nothing. It is with my Web camera - no driver. After I installed my touchpad began to be brighten up, but I still can't use the music BIOS update keys. I hope someone can help. Please :)

  Sorry for my English

  Install the Toshiba value added for the A300 (use the PVAT Win7, not the PVAT Vista).

  This site of Toshiba: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

• T500 initialize the W10 64-bit problem

  I have a rather strange problem. Basically if I fresh start my T500, aka show etc. of a complete power off, the splash screen, but the display never passes the actual Windows OS 10. I can say the system is running and if I manually set the system sleep with FN + F4 and then put it out of the screen will be responsible for sleep. Not a terrible problem, but a slightly annoying extra step I have to do at each boot up.

  I haven't used this laptop for quite awhile and had done a completely fresh from the W10 - 64 bit installation when I decided that I needed as a notebook of basic work.

  Any ideas that might help with this would be greatly appreciated

  If you have switchable graphics, enter the BIOS setup and choose display. Set it ti discrete and disable switchable any graphics OS detection. Then let it win 10 install the video driver. This can take a few hours to win 10 to realize you've changed video card.

• Windows 7 media center languages entered into version 64 bit problem

  Hello

  I use windows 7 64-bit edition as my desktop of the OS. Until a few months ago, I used the 32-bit version of the system. I use English laguages (United States) and in Hebrew.

  I'm a media center (my office is connected to a HD TV and I have 2 Extenders in other parts of the House). When you use the windows Vista and Windows 7 32 bit media center Media Center, I was able to use English and Hebrew on the application media center for nothing - music/video and research names in both languages. When I migrated a couple of months in the 64 bit version of windows 7 (clean install, no upgrade) I had again running and Windows media center to the top. English and Hebrew are used for display (video/music names), but I can find only in English. The option on the keyboard to change the language disappeared. This can be corrected?

  If you can help, please do, as I couldn't find any information relating to this problem.

  Thank you

  Yaron

  Well, figured out.

  I had to modify the new user setting language support. When you set the keyboard and language support, there is an advance tab which will allow you to copy your profile of language support for new user accounts. I did and then disconnected the server extender, erased any user account (MCX? ones) and then reconnected the Extender. a new user has been created, and now it works well.

  Thank you all for the evidence you provided.

  Yaron

• Driver with ATI Radeon HD 3850 AGP under Windows 7 Pro 32 bit problems

  Windows 7 Pro 32 bit reports after installation of the driver that no driver is present. There was patch drivers provided by ATI to solve these problems, but these drivers did not resolve the problems. Has anyone had success with this installation, and if so, would you please provide me with how you did this? Thank you. BTW, I did the ususal uninstall and then install, reinstalled the operating system via a facility clean and then installed the drivers, etc, etc. So far,nothing has worked. After Googling this issue I found that many others have had similar experiences with these driver problems. Now I have XP Pro and Win 7 Pro installed via dual boot and XP Pro is running pilots ok with no problems. Thank you!

  I came across the work of question three years ago on one of my machines.

  It is a problem of compatibility between the nForce 3 and AGP.  I don't remember the exact details, but with a nForce 3 and similar day SIS chipsets and a few others when they had a dual-core CPU in them, they would change the AGP port to use a PCI driver or something of this nature to enable the multi-core support (such as it's been hacked on toward the end of their development).  On Windows Vista and upward, such a workaround solution does not work.  SiS and some other published updates driver for the motherboard chipsets which he sorted, nVidia did not worth it, despite nForce 3 sold as Vista compatible.  nVidia pulled this stunt with a lot of things at the time, including their GeForce 5 cards, saying they supported Vista, same with the beta drivers and then they just canned originally.  They took both.

  It is a solution that will be the kind of work, but as you may have guessed, you will need to disable one of the cores of your CPU.

  You can do this by going to msconfig, click on the Startup tab, click Advanced... and changing the number of processors at 1.

  Reboot and your graphics drivers will spring magically to life.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• lots of updates to vista 64-bit problems. 641, 8007064 (error code) 36275.2503665, 2518863, 951847, 950125, 2536275, 954459, 9555971, 954430, 979688, 986615, 2347290, 655020, 973688,982799, 975558, etc..

  Vista Home pre. 64 bit. update problem. page update code error 641 and 8007064. A lot of 959108 KB 2536276, 2503665, 2518863, 951847, 950125, 9536275, 954459,2555971, 954430, 979688, 9826615, 2347290, 955020, 973688, 982799, 975558, etc tried difficulty option now, no help.

  Hello

  1 have. what Fix - it you tried?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it of the article mentioned below:

  The problem with Microsoft Windows Update is not working:

  Method 2: Run scan SFC.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

• HP Envy M6 64 bit problems after update to 8.1 windows

  Last night I updated to windows 8.1 8 and have had problems since. I have a 64 bit HP ENVY #C2L94UA # ABL m6 after update, I tried to play Devil may Cry game that worked perfectly under 8.0 and then he comes to start charging the computer turned off. I did research online and exhaustion possibilities why including the abolition of the xbox drivers and reinstall the game but nothing doesn't always turns off the computer. I then opened AMD vision, to try to adjust the settings, I noticed I was now just as 3 options of things to settle. I could just adjust power consumption on the processor dependimng on if the computer was plugged in or not. Went a whole optiuon to adjust graphix and all the things to do it graphically disappeared. Then I redownloaded the catalyst drivers and tried to reinstal. Once the computer off again. Every time I have try and update the graphics it stops. Site Web HP says that all my drivers are up to date. Then, I rebooted the computer by pressing ESC and tried to do a system refresh. He failed. All the options of wiping my computer clean and refreshing failed. I said that it lacked a partion for one of them. Even system restore will not work. It shows my Ati video card in device manager. Please help me ty

  OK I solved my problems that I did start the computer in safe mode and then I uninstalled my cards video from Device Manager. I then restarted the computer and installed the version of catalyst that was said to work with 8.1 and switchable graphics cards. I have restsrted and have more no video issues at all.

• Boot Vista 32 bit problems

  MacAfee bypassed downloaded Trojan horse on my laptop a few months ago.  I bought Malwarebytes pro who has found, quarantined, and even removed. Since that time? While it fires without problem, my laptop does not always load windows correctly and must be repeated started or have removed and reinstalled battery to start windows.   Eventually windows will open and operate normally. It doesn't have the standby mode only after being completely closed. I just got a clean stall re done by the shop where I bought it cost £80 and the problem persists.  Get the sympathy bit or not at the dealership.  I managed to find how to use the HARD drive recovery disc I made myself and picked up the phone to the factory settings.  As I handed out programs, startup problems are still there?  Diagnostic test indicates no problem, have also run chk disk that does not solve this problem

  Hello Anthony662,

  Sorry, you experience this problem.  Reading your posts, I show, you have a recovery disk, but you have an installation for Windows Vista disk?  If you do or are able to get one, I suggest to perform a repair of the start-up of an installation disc.

  Do you have confirmed that your laptop is updated with all the drivers, BIOS and FW?  I suggest you look at the manufacturer's website to see if there are any new updates.

  Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Thank you

  James

• ITunes on windows 7 Professional 64-bit problems

  I tried to install itunes on my new sony viao, who has windows 7 Professional (64 bit). During installation, all the icons on the laptop were converted into itunes icons and shortcuts have been also start itunes. I found all my icons to the trash. When I uninstalled itunes, they were returned to their original state

  You can post the question on the Apple forums:

  Apple - Support - Discussions: itunes
  http://discussions.Apple.com/category.jspa?categoryID=149

  Apple Discussions - using itunes for Windows
  http://discussions.Apple.com/forum.jspa?forumid=800

  Apple-Support - Discussions: Installation and update itunes for Windows
  http://discussions.Apple.com/forum.jspa?forumid=792 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Computer does not work - task scheduler, free 32 bit problems Analyzer engine

  Hi guys,.

  I've seen this problem in several forums, but I think that my problem is slightly different. I turn on my computer, after which I get loads of different signs in this order:

  Task Scheduler engine has stopped working

  debugger analysis free 32 bit has stopped working

  Control Center Catalyst host has stopped working

  AND then a list of messages saying all my programs are shut down. I can't use any program and my computer then hangs.

  There was no harm to my computer until today. (I entered another of course), and it is only a year old, so I don't understand what goes wrong.

  I initially buy this Vista computer with a CD to upgrade to windows 7 and therefore no cd of windows vista. I tried the upgrade to windows 7 by doing a clean to get rid of this, install but it says that I don't have enough memory to do this (although the RAM in my computer is not overloaded and that my hard drive is empty)

  I'm a computer user quite amateur, so everything that concerns me - please could someone help me by giving me some simple instructions please?

  Turn off the DEP is not set in stone and can be reversed, you could try and see if it solves the problem, if he succeeds then at least you'll have a workaround solution to fall back on in case of emergency.

  As with any new installation of Windows 7, if drivers are available, you should be able to locate at HP by following the links on this page at HP driver.

  HP Pavilion dv6-1131ea Entertainment Notebook PC
  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&product=3947230&LC=en&JumpID=reg_R1002_USEN

  They also have a link to troubleshooting.

  A pilot and a CD Application cannot start, but may be called for (time) if any other provided or created Recovery CD is bootable and used first?  In other words, the first two-CD box set CD is bootable, and the second of such a set is not.

  If it was my decision I dump Vista and install Windows 7.  First of all, I would like to do as there are Windows 7 drivers available on the HP site.  Other equipment manufacturers that you attach also require Windows 7 drivers, for example, you could connect a printer of Canon or Epsom etc.

• Desktop PC HP Pavilion 500-310a (8.1, 64 - bit) problem since

  HP Pavilion 500-310a Windows 8.1 PC 64 bit

  I bought my PC 4 months and I had one thing after another.

  It is still off after 2 minutes and you will have to re-enter, enter the password to the start screen.  The tiles on the start screen often do not respond and I am often without e-mail, this time it is said on the parameters are not AVAILABLE.  My emails come back to drafts or returned to people I did not in the send to box when he's working.

  I would be grateful if someone could help because I called several numbers, and I'm not getting anywhere except that... they want loads of money to address the problem. I don't know if they are true, I got using the internet figures.

  I'm not familiar with computers or their simple English jargon would be good.

  Cordially D56

  Your system is under warranty, please call Tech support 1 (800) 474-6836 is 24/7 and it's free for you. (call guarantee).

• ram Windows 7 64 bit problems

  I have windows 7 64 bit with a PNY Nvidia GT630, Intel Pentuim D 3.2 Ghz I recently upgraded from 32 bits that I had the same problem on. I have 2 x 4 GB ram sticks and 1x2gb 1x1gb. I've been running the 1x1gb and 1x2gb ram sticks very well for the last year or two. I bought the 2 x 4 GB ram sticks online and they have the same specifications as the ones I installed. When I installed the RAM sticks 4 gb bobbin fans up faster that normal and the motherboard beeps for a second to two seconds. No matter what I always did beep with the 4 GB installed ram sticks. Record: Operating System Windows 7 Home Premium 64 - bit SP1, processor Intel Pentium D 940 Presler 65nm technology, RAM 3.00 GB Single - Channel DDR2 at 266 MHz (4-4-4-12), motherboard ASUSTek Computer Inc. EMERY2 (Socket 775), graphics HF207 (1600x900@60Hz) 2047 MB NVIDIA GeForce GT 630 (PNY), 232 GB Seagate ST3250824AS (SATA) 232 GB Seagate ST3250824A storage

  Motherboard
  Reference of the manufacturer ASUSTek Computer Inc.
  Model EMERY2 (Socket 775)
  Version 0ny1114RE101EMER200
  Intel chipset provider
  Model of i945P chipset
  Chipset revision A1
  Southbridge Intel supplier
  Southbridge 82801GB (ICH7/R) model
  Southbridge revision A1
  System of temperature 40 ° C
  BIOS
  Mark Phoenix Technologies, LTD
  Version 3.19
  Day 08/12/2006

  Obviously, the 4 Gig sticks are somewhat different.  RAM is VERY picky.  Even if they have the same latency but another manufacturer they can cause problems as you see

• Driver HP Business Inkjet 2800 Windows 7 64 bit problem

  Hello

  I've recently updated my PC to windows 7 (64-bit). After that I have a face issue, I don't get running windows 7 64 bit HP Business Inkjet 2800 printer driver. Please help me if anyone with complete operational driver.

  Black only option is off in my printer. I need to activate this option. Please help me anyone know of any solution.

  Hello

  You get the drivers for your printer directly from HP

  Uninstall and reinstall your printer using the right drivers and installation on the HP Web site information.

  And there are some troubleshooting steps for her there too.

  • HP Business Inkjet 2800 printer

  Or you can also ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  @@@@@@@@@@@@@@@@@@@@@@@

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Activation product key for Windows 7 Professional 64 bit problems

  I've had this computer for a while. Several years ago, a friend of mine asked me if I would like to install windows 7 Professional at half price because he pre-ordered 2 copies at half price. I was running Vista and bought from him. I have never had any problems with the product code, through 3 motherboards, (HP hurts many mothers), and have a computer repair store to install a new hard drive by using the same product activation code. I reinstalled Windows 7 pro 64 bits once before experiencing a lot of problems and so about 10 days ago. I have not had any problems until yesterday when I had a messaqge saying that my product key has not been accepted. I have no time to this address until today and I keep re - enter the product key and get the error Code 0xC004C008 message that says that my product key is not valid. Until that time, Windows update has installed more than 100 updates without problem. What can I do? I bought this in good faith and the product key worked before, whenever it was necessary.

  Try the phone activation:

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  = If the phone activation is refused, then follow these steps: =.

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  http://www.Microsoft.com/genuine/selfhelp/ServiceRequest.aspx
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  Also, make sure your product report ID:

  The part you are interested in is the section to three digits of the number to identify the product, if it corresponds or is included in one or two digits of the examples below, you probably have a MSDN or TechNet product key. "These keys must not be sold for retail use.

  065 066 067, 068, 069 for Ultimate, 220 for professional and 230, 231, 232 area for Home Premium,

  There are probably others, but they should be close to those that are displayed"
  (How to be certain - download the Microsoft Genuine Advantage Diagnostic Tool listed above).

  Note: Though that illegally sold MSDN/TechNet allow product key for activation of more than one
  (usually 5 or 10), so these keys can be sold "several times" before activation may fail.

  J W Stuart: http://www.pagestart.com