(Redirected) Alienware Aurora (end of 2009) and monitor Dell 3715

Similar Questions

• (Redirected) Alienware aurora r4 (end of 2011). My computer is the breaking of my gpu?

  Hi, I had trouble with my r4 Alienware Aurora (end of 2011). The original gpu was a 555 gtx, but I upgraded to an hd 7970 just a few months after I got the computer. This card lasted a year and the theanks to a three-year warranty, I got a new hd 7970 which also lasted about two years before he fell. Still, I got a new card of the company, that I bought, but this time, it was an x 280 r9. This card lasted about an hour before I started having accidents. I decided to send my computer to a company that troubleshoot computers and they concluded that it was the gpu that was broken and they couldn't find any problems with my other components so they think it was a mistake to plant on the r9. However this doesn't seem to be a coincedence, and I think that there is something in my computer that breaks my graphics cards.  Only one strange thing is that my original gtx 555 works perfectly.

  Has anyone else had this problem with their r4 aurora?

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware Aurora R4 new business?

  Hello, I would like to know that if I can move my Alienware Aurora R4 components and move them in another case, my water cooling is the cooling system default Alienware with no tank. I would like to replace my GTX 670 with a GTX 780. My motherboard is the Dell X 79 mATX motherboard aliens. My diet I'm not sure that I don't have the space and time to open my pc and look, but I think it is 850w. Thank you.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Alienware TactX KG900 & MG900 drivers and utilities (DELL please update this software!)

  Alienware TactX KG900 & MG900 drivers and utilities update?

  I'm looking everywhere for a software update for the Alienware TactX keyboard and mouse KG900 & MG900.   Later I see available online at Dell is the same as the original disk I have since September 2009 v1.0.51.0.

  Looks like Dell would provide software updated with more features or capacity with profiles more preloaded for games today or simply able to to make it more user-friendly.  Its now 2011, and windows 7 64-bit is the norm these days.

  We need a software update please.

  sincerely

  Sayer G

  No need to change the date, that's how long I had been looking for the new drivers/software update. Just because your 3 years later for a response and a response I've had for two years already. Find something else to do, your useless in that Department.

• (Redirected) Alienware Aurora R4 help

  My Aurora was bought in 2013, I have no guarantee, I need at least to know if anyone has had or knows what this problem is. I left my computer on at night, I did several times and never had any problems, but this time I was awakened by the high-speed rotating fans. Tired I simply cut off the computer. I wake up the next morning and whenever I try to put on the fan runs at full speed and nothing happens, monitor, keyboard, mouse, nothing. So I unplug the drill rig, hold the power button to do the thing, sorry I forgot what it's called. This time he lights up for a split second then turns off. I know that's not the power supply cause I tested it. I tried to do the reset cmos and nothing thing. Someone please before considering anyone I would at least like to know what the problem is. Thanks in advance.

  SolidWarSnake

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware Aurora R4 will not start windows, stuck in the endless start cycle

  I go give the situation leading to this problem in aid of casemit t.

  My computer started to slow down a lot, the computer crashed quite often in 2 different ways 1 the computer could hang with a message from windows saying that my computer ran into problems the second way, it would be a black screen saying no internal hard drive, also found if I leave my computer on for a while it would end in the 2nd type of accident or when I tried to come back and give the signal to pc can he would not return.

  After a few days when I started the computer windows started normally but it was extremely slow nothing loaded quickly a process that was normally a few minutes became hours.

  Then, I started in safe mode to reset my computer bug each time said he couldn't finish.

  Now when I turn on my pc I get the boot of alienware repeat infinitely, it beeps power up then a little later my devices will down and the lights on the pc and it will start again.

  I can't access the start menu when presiding f12,

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware Aurora R4 - replacement hard drive failed by disk image

  I went to the Dell website and ran the diagnostics for my R4 Aurora. He said that the hard drive had no 2 tests. So, Dell quickly sending a hard drive 2 TB of replacement. I received it today. The bag of the hard drive has a sticker that says "image". I guess that means that a new installation of my Windows 7 Ultimate factory has been installed on the hard disk. I did not receive any instructions, except to say that I need to replace the failed hard drive and return it within 30 days. OK, I can do the physical dominance, but there are a lot of questions, I feel unanswered.

  Where are the instructions step by step to do this?

  Should I get the ID product, s/serials for Windows 7 and office products that I have on the old drive?

  Someone please point me in the right direction. My warranty includes no cat, and Facebook and Twitter are not my best subjects when it comes to getting help.

  Any help will be greatly appreciated. The moderators of Dell, plese chime and let me know as well.

  Thank you

  johnssm

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware Aurora still on R4

  Can you damage your system, especially the motherboard and the capacitors power if you let this computer on too long? Reference Dell told me, but I have a lot of doubts? Supposedly, I have damaged my motherboard in doing so.

  I thank very you much for your comments. So basically what Dell told me (I've supposedly damaged my motherboard and some capacitors leaving him for too long for my specific hardware) is simply wrong?

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware Aurora R4 - 6 beeps, no video card

  Hi all

  I'm having a pretty rough week. I do a lot of PC gaming and this week my machine failed on me.

  Under the assumption that I still had warranty, I called Dell. I told them I had 6 beeps, and which would normally be the video card.

  • I replaced the video card, tried two cards into the two slots that they would fit in, with food... still 6 beeps.
  • I have reset the CMOS
  • Reinstall RAM
  • Disconnected all powers components on motherboard and peripheral, and I still get 6 beeps.

  This makes me believe that it is either the motherboard or its power supply.

  Has anyone else had a similar problem?

  TL; DR below:

  I was told that my computer was no longer under warranty and to call to get an extended warranty. 350 + dollars later... I call the next day and told me that I can't use my warranty because the problem arose before I had the warranty.

  I've been upset about it, fine, picks me up at the Department I pay so it can be corrected. I hung up at least 4 times, and I keep getting transferred to the wrong Department...

  I tried to call Dell warranty... They transfer me Alienware that tells me an e-mail:

  [email protected]
  ... which is not a valid mailbox and who orders me:
  [email protected]
  ... that I get no response...
  I just want to help...

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware Aurora R3 / water damage / the amount of memory has changed... Problem

  Hi all

  Last night, I spilled water on top of my alienware desktop computer. I quickly shutdown, unplugged and held head down for awhile. First time I turned it back on, it gave me the "amount of memory has changed, but none has been added" problem. I went through system troubleshoot (F5 I think) and had everything to the point where it asks if you want to continue for 30 minutes. I skipped that and restarted. Second time I turned on my computer, it loaded all regularly, logged into my account, desktop screen with files, etc. Then he went straight to the screen of closing and began to beep, in the explosion of two. Whenever I try to start, stuck to the error page "the amount of memory" with two beeps.

  I tried a few searches and it seems it could be a motherboard problem, I'm not sure. I would like to email technical support, but it seems impossible without active coverage? (Mine is is no longer active).

  My question is, is it sounds like a problem of motherboard and if so, how can I replace it in my office? Where to get the part, etc.

  Thank you for your useful answers.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• What is the power to alienate aurora (end of 2009)

  looking to update my graphics card but I can not understand the power and my power amp line.

  I can post my service number if this can help to identify the power supply

  You will probably get a better answer in the forum of the Club of Alienware .

  Please do not post your Service tag in one of these forums. Not only is a violation of the terms of use forums, your Service number should be considered confidential and not shared with anyone other than employees of Dell.

• (Redirected) Alienware Aurora R4 - cannot install Intel Management Engine Interface

  Hello

  I had this problem for quite a while now. Since I reinstalled Windows 7, the "Intel Management Engine Interface" driver does not install correctly. It gives me an error code 10. I can't find solutions for this problem.

  Help, please.

  Thanks in advance,

  Qubn

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware aurora alx R4

  It is possible to put two cards in SLI nvidea 970 pour update my pc

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Pavilion Elite e9150t and monitor Dell

  Hello world!

  I'm new to this forum. Two months ago I bought the Dell S2209W 22 "full HD panoramic monitor. Now, I fell in love with Pavilion Elite e9150t and want to buy it but I don't know if the monitor plugs match e9150t. Any suggestion would be appreciated.

  Oldxxjohn, the monitor should work fine with the elite.  Monitor connectors are standardized to work with any brand of computer.  Here is a link to the "Product information" pages for the elite:

  http://h10025.www1.HP.com/ewfrf/wc/prodinfoCategory?LC=en&DLC=en&cc=us&product=4003103&lang=en

  Message edited by old_geekster on 07/01/2009 12:18

• Alienware Aurora r4 does not start with new graphics card.

  Hey,.

  I have an alienware aurora end of 2012 I believe.

  I currently have a series of 6800 AMD raedon graphics card, processor 3930 r9 k i7 and 8 GB of ram.

  I recently bought a MSI gtx 970 game to replace my old graphics card. I plug this card and it even lights up when I turn on the computer, but however my pc only happens to the start screen where I get the choice after pressing F2 and F12 and then freezes and I can't do anything. I then hear 3 beeps of inside my pc and then it proceeds to a blackscreen where my only choice is to turn it off manually.

  I tried to uppgrade my BIOS without much success (dident make it work), uninstall all graphics drivers from AMD, but nothing has changed.

  So I'm clueless I'm kinda a noob of the pc and have no idea what could cause this and would love help to explain what happens if all goes well if anyone knows a fix.

  THX in advance :)

  You you connected all power cables required PCIe 970? They are probably different config as AMD-6800. You should have 875w PS, but you might need to check that.

  Probably should have uninstalled AMD Driver Suite (catalyst) before removing the card from AMD.

  If card MSI BIOS a double switch, you can try another position.

  Try Mode Windows safe.

  What operating system do you use? Are you running the UEFI BIOS or legacy Mode?