(Redirected) Billions of dollars, bad support

Similar Questions

• (Redirected) VOSTRO 14-5780 bad sound from the motherboard

  Hello guys, I have some strange sounds, in bad taste (like old HDD) to my motherboard. When I bought my laptop, i waqs, thinking that this sounds come from native hdd or fans, but before Christmas I replaced the HDD to new ssd and the sound has not disappeared. I noticed that this noise is only when the CPU is not working hard. If you have any ideas how to fix?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.

• ACTIVATION OF WINDOWS 8 AND BAD SUPPORT

  I have a laptop HP Envy that i purcased new.

  Following an HP Upgrade Wizard support the BIOS has been improved, and then that's when the problems started.

  I contacted support and they said to re install windows I made then windows comes up and says can not activate the number was blocked.  Contact Miscrosoft and they say its problem of HP so I in-kind riung HP.

  They told me to re install windows on a disc that they sent me.  So I have - and keep in mind that it is now the third time had to reinstall all the programs and windwos yet.

  Always have the same problem - cannot activate windows.

  Ring supoprt telling me that HP will provide me with a key proiduct and they will ring me back.

  I rang now 5 times and every time that I thought it was escaltred to level 2 and I'll be conatacted this day there with a response.

  Still, I had no call to phone back, windows always say must activate and I must deal with the blue activation scrteen every now and then.

  How to get the product key or even better someone who actually ring return me to the question I've been tild will happen and still does not.

  I read the other AIDS and have made what they say, and it does not work.

  I need this problem because it has now been more 1 week of frustration and poor customer service.

  Thank you

  All fixed now

  Seems there are 2 areas, you can put in the activation code and one works the other doesn't have.  who would have thought

• (Redirected) HDMI cable on laptop support

  Hello world

  I would like to know the length of the HDMI cable that can support on Dell Latitude E6530 laptop.

  Tested with 10 meters - worked well with the two E6530 & E6520

  15 & 20 meters cable has worked with E6520 but failed with E6530, not yet worked with PIX of 1280 * 1024.

  Hi bschouhan,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• Bad support card stuff ;-)

  I did plan to backup stuff (to implement Versions of objects).
  
  I thought naively that the binary way was an object:
  
  ExternalizableHelper.toBinary)
  
  However, this does not take account of the KeyAssociation.
  
  Ben Stopford was able to dig me up a code that works:
  
  binary.getContext () .getKeyToInternalConverter () .convert (vKey)
  
  Anyone can comment on that - is there a method 'allowed '?
  
  Best, Andrew.

  Hi André,.

  It depends on what you want to do.

  To convert a binary object, you should preferably use ExternalizableHelper.toBinary (object, serializer), where the serializer is retrieved from the appropriate Cluster Service (you should do this way, if you enable evenly POF in all the services, or if you use a custom serializer).

  On the other hand, support card keys are not simple binaries. It may contain additional information such as decorations, including the partition in non-cloison-split support id cards distributed caches. To do this, you should indeed be able to handle the key association.

  So if and only if you want to create a binary file that you can use as a key to a storage card, you must use the expression of BackingMapManagerContext.getKeyToInternalConverter () .convert (Object) .

  Of course, if you want to convert an object into a binary file, which is used as a support card (which I believe can also be decorated, e.g. lock information or writeback status plugged), you must use a different Converter: BackingMapManagerContext.getValueToInternalConverter () .convert (Object).

  The BackingMapManagerContext instance, itself can be retrieved by CacheService.getBackingMapManager () .getBackingMapManagerContext ().

  Best regards

  Robert

• redirection response

  I searched for the right code, but I've used in the past does not do. Basically, when you add a new user, or if a user changes his password I want to redirect to another page asking for them to use another. Teh usual code I would use is a redirect simple answer:
  
  < %
  If rsDealers.EOF then
  Response.Redirect ("ChangePassDUP.asp")
  On the other
  % >
  < %
  End If
  % >
  
  But for some reason, it does not. I always get:
  Microsoft OLE DB provider for ODBC error '80040e14' drivers
  
  [Microsoft] [ODBC Microsoft Access driver] The changes you requested to the table were not successful because they would create a duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.
  
  support/EnterDealer/ChangePass.asp, line 57
  
  As it completely ignores the code.
  
  Line 57 is the comand execute: MM_editCmd.Execute
  
  Here's the code generated for the rest DW. As you can see, I generate a session variable to display a confirmation page. I tried:
  < %
  If session("Toyo2") = "" then
  Response.Redirect ("ChangePassDUP.asp")
  end if
  % >
  
  But that no longer works. Any ideas out there?
  
  
  < %@LANGUAGE="VBSCRIPT"% >
  < % session ("Toyo2") = request ("Passchange2") % >
  "<!-#include = file '... /... "/ Connections/connToyoDelears.asp"-->
  < %
  ' * Restrict access to Page: grant or deny access to this page
  MM_authorizedUsers =""
  MM_authFailedURL="/support/Support2.asp".
  MM_grantAccess = false
  If Session("MM_Username") <>"" then
  If (true or CStr (Session("MM_UserAuthorization")) = "") or _
  (InStr (1, MM_authorizedUsers, Session("MM_UserAuthorization")) > = 1) Then
  MM_grantAccess = true
  End If
  End If
  If not MM_grantAccess then
  MM_qsChar = '? '.
  If (InStr(1,MM_authFailedURL,"?") (> = 1) then MM_qsChar = "&".
  MM_referrer = Request.ServerVariables ("URL")
  If (Len (Request.QueryString ()) > 0) then MM_referrer = MM_referrer & "?" & Request.QueryString)
  MM_authFailedURL = MM_authFailedURL & MM_qsChar & "accessdenied =" & Server.URLEncode (MM_referrer)
  Response.Redirect (MM_authFailedURL)
  End If
  % >
  < %
  Dim MM_editAction
  MM_editAction = CStr (Request.ServerVariables ("SCRIPT_NAME"))
  If (Request.QueryString <>"") then
  MM_editAction = MM_editAction & "?" & Server.HTMLEncode (Request.QueryString)
  End If
  
  'boolean to abandon a record edition.
  Dim MM_abortEdit
  MM_abortEdit = false
  % >
  < %
  "Implementation of the IIR.
  Function MM_IIf (condition, ifTrue or ifFalse)
  If condition = "" then
  IfFalse = MM_IIf
  On the other
  IfTrue = MM_IIf
  End If
  End Function
  % >
  < %
  If (CStr (Request ("MM_update")) = "Toyopass2") then
  If (not MM_abortEdit) then
  'perform the update
  Dim MM_editCmd
  
  Set MM_editCmd = Server.CreateObject ("ADODB.Command")
  MM_editCmd.ActiveConnection = MM_connToyoDelears_STRING
  MM_editCmd.CommandText = "entry UPDATE SET Password =? WHERE password =? »
  MM_editCmd.prepared = true
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param1", 202, 1, 255, Request.Form ("Passchange2")) ' adVarWChar
  MM_editCmd.parameters.Append MM_editCmd.CreateParameter ("param2", 200, 1, 255, Request.Form ("MM_recordId")) ' adVarChar
  MM_editCmd.execute
  MM_editCmd.ActiveConnection.close
  
  ' add the query string to the redirect URL
  Dim MM_editRedirectUrl
  MM_editRedirectUrl = ' / support/EnterDealer/ChangePassConfirm.asp '.
  If (Request.QueryString <>"") then
  If (InStr (1, MM_editRedirectUrl, "?", vbTextCompare in) = 0) then
  MM_editRedirectUrl = MM_editRedirectUrl & "?" & Request.QueryString
  On the other
  MM_editRedirectUrl = MM_editRedirectUrl & "" & Request.QueryString
  End If
  End If
  Response.Redirect (MM_editRedirectUrl)
  End If
  End If
  % >
  < %
  Dim rsDealers__MMColParam
  rsDealers__MMColParam = '1 '.
  If (Session("Toyoenter") <>"") then
  rsDealers__MMColParam = Session("Toyoenter")
  End If
  % >
  < %
  Dim rsDealers
  Dim rsDealers_cmd
  Dim rsDealers_numRows
  
  Set rsDealers_cmd = Server.CreateObject ("ADODB.Command")
  rsDealers_cmd. ActiveConnection = MM_connToyoDelears_STRING
  rsDealers_cmd.CommandText = "SELECT * WHERE = the password entry?"
  rsDealers_cmd. Prepared = true
  rsDealers_cmd. Parameters.Append rsDealers_cmd. CreateParameter ("param1", 200, 1, 255, rsDealers__MMColParam) ' adVarChar
  
  Set rsDealers = rsDealers_cmd. Run
  rsDealers_numRows = 0
  % >

  Too bad I knocked out through this one as well. Maybe I'm not explain correctly but it seems harder for people Wade in and help. Y at - it another site - blog of people go for help?

  In any case, this code did the trick. It's a small change to the DW "Check a new user" server behavior.

  < %="">< br="">' * redirect if the username exists < br=""> MM_flag = "MM_update" < br=""> if (CStr (Request (MM_flag)) <> "") then < br=""> MM_rsKey Dim < br=""> Sun MM_rsKey_cmd

  MM_dupKeyRedirect = ' name of the file to go to fi dup "< br=""> MM_dupKeyUsernameValue = CStr (Request.Form ("the form field name")) < br=""> Set MM_rsKey_cmd = Server.CreateObject ("ADODB.Command")". "
  MM_rsKey_cmd. ActiveConnection = MM_connToyoDelears_STRING < br="" >="" mm_rskey_cmd.commandtext="« SÉLECTIONNEZ" mot="" de="" passe="" d’entrée="" où="" les="" mot="" de="" passe=" ? »"> < br="" >="" mm_rskey_cmd.="" préparé="true"> < br="" >="" mm_rskey_cmd.="" parameters.append="" mm_rskey_cmd.="" createparameter="" ("param1",="" 200,="" 1,="" 255,="" mm_dupkeyusernamevalue)="" '="" advarchar=""> < br="" >="" set="" mm_rskey="MM_rsKey_cmd." exécuter=""> < br=""> If Not MM_rsKey.EOF or not MM_rsKey.BOF then < br=""> ' the username was found - cannot add the requested username < br=""> MM_qsChar = '? '. < br=""> if (InStr (1, MM_dupKeyRedirect, "?") > = 1) then MM_qsChar = "&" < br=""> MM_dupKeyRedirect = MM_dupKeyRedirect & MM_qsChar & "requsername =" & MM_dupKeyUsernameValue < br=""> Response.Redirect (MM_dupKeyRedirect) < br=""> End If < br=""> MM_rsKey.Close
  End If < br=""> %>

• View of 4.5 + Wyse TCX USB Redirection + V10LE

  Hello, I am new to these forums; I turned on these forums for advice/help with the current implementation, I'm working on that.

  Some basic information:

  We bought 250 Wyse clients V10LE light, two servers Dell Poweredge R900, VMware VSphere Standard (8 CPU) and 2 x Windows Server 2008 R2 Datacenter Edition.  Our original deployment was a set to serve as a virtual server 08 VM servers terminal Server, the V10LE attached to these Terminal Services virtual and received the server-based desktop computers.  This has proved to be a major disaster, and now the 30 users on these clients we have deployed suffer daily with constant crashing and inability to do their job.

  Current situation: we changed our game plan to integrate VMware View.

  In the tests, I first tried the view Management Server 4.0 (older Version) after some violins, we were able to get workstation to work perfectly in the environment of the view, keep in mind, this environment did not use VMware view composer that I was unaware of his abilities and just had to test.  I was able to get the redirect TCX USB to work perfectly by installing more server on windows XP VM workstation connected in.  We were able to redirect brother multifunction printers and use all the features of the printer as if it were installed on the local PC.

  Having discovered how perfectly it would solve our problem, I decided to try the 4.5 administration package view.  This is where I ran into problems.  TCX USB virtualization does not AT ALL.  The client detects the device USB, TCX client-side working properly, the server suite is installed on the Backend (XP Win VM persistent no).  I have now installed and use the portion of the administration of the view composer, composer use capabilities are incredibly beneficial to our environment.

  I tried to install the Agent from the view on the XP desktop with all the modules, including the USB virtualization, the transfer did not work at all.  After the suggestion of installing the agent without USB redirection with a Wyse tech support person, I tried, same results.  I don't know what the differences are there between 4.0 and 4.5 view server, but all that has changed is not to allow this to work.

  Any help/suggestions would be greatly appreciated.

  Thank you very much.

  In 4.0, there's an option under view connection server settings so that the login server to "Direct connections" on the desktop. This basically ignore the login server and your client to connect directly to the virtual machine. This was necessary for a lot of TCX to work in 4.0. I don't see even this option in 4.5, then perhaps the problem, you see?

  ____________

  blog.eeg3.net | Useful links related to VMware

  If you have found this device or any other post useful, please consider the use of buttons useful/correct for award points.

• Link to contact Support Adobe review team

  The guys ~

  I'm becoming Adobe Certified Expert (Flex 3 with air) as August 22 09 but the date (now he is almost 3 days) I have not received email from ADOBE on my review. On my candidate Id review report shows it as being on hold. I tried a lot to make contact with Adobe and Center Prometric Pearson, but whenever I click on the contact on the ADOBE web site link, it redirects me to link Product Support.

  Could someone help me?

  Kind regards

  Yogesh

  There I just have to wait. Be patient. When I Flex 2 ACE certified and Certified Flex 3 ACE, it's the same for me.

  If this post answers your question or assistance, please mark it as such.

• DATABASE ENCRYPTION and Base64Encoder DOES NOT WORK WITH LIVELY CC!

  I'm trying to encrypt a database by using the as3corelib.  Libraries document Adobe Actionscript 3.0 points to the value of the third /classes to run the encrypted database. 

  
  

  > > > > > Animate them Adobe documentation > http://help.adobe.com/en_US/as3/dev/WS8AFC5E35-DC79-4082-9AD4-DE1A2B41DAAF.html.  (See " (" Finish the code example for production and using an encryption key" Section)

  > > > > > The GitHub downloads it point to > GitHub - mikechambers/as3corelib: year ActionScript 3 library that contains a number of classes and utilities for work...

  
  

  The EncryptionKeyGenerator.as class uses a SHA256.as class that points to import non-existent mx.utils in CC to animate.  ("import mx.utils.Base64Encoder;")   The mx.utils is a set of Flex 3 utility vs animate CC/Flash Professional

  * Here is the compile error:

  \FLASH TESTING\DATABASE ACCESS and PASSWORD\com\adobe\crypto\SHA256.as, line 120, column 16 1046: Type was not found or is not a constant of compilation: Base64Encoder.

  \FLASH TESTING\DATABASE ACCESS and PASSWORD\com\adobe\crypto\SHA256.as, line 120, column 36 1180: call to a method maybe not defined Base64Encoder.

  \FLASH TESTING\DATABASE ACCESS and PASSWORD\com\adobe\crypto\SHA256.as, line 37, column 17 1172: definition mx.utils:Base64Encoder could not be found.

  **

  Someone at - there a work around for this?

  OK I think I myself have fixed.

  If you have been searching high and low for an answer like I did then, you probably are upset right now because you think the following as I did.

  "Hey WTF? exclaim In addition to the $600 dollars I paid for this shit, I also bought the book of crap that they recommended that only tells me how to generate a quiz game!  Why did I have search everywhere on the internet, so come here to read the nonsense of this guy to get my answer? »

  Well boys and girls, to get your answer and if you're as crazy as me when I started to look for it then, I ask you to do something before using my answer.  Send a message or post a new message on this forum, ask ADOBE to improve their horribly awful documentation at ADOBE.  His tragic how such a good set of programs is hindered by a bad maintenance of documentation.

  This particular case is the worst example of many that I lived.  There are mislabeled subjects that are old and new mixed versions. It has exceeded links to files that have not been updated over the years.  There are references to third-party developers who are quite nice to help ADOBE, but if I have to pay ADOBE $600 / year for a product, then, I wouldn't go looking for forums, Google and third parties to OBSOLETE support to solve problems or just learn how to use the product.  I should at least get the * book worthless telling me that basic stuff on the use of the program as well as the quiz game stupid with my purchase of $600 / year.

  Anyway, off my soapbox, for help.

  THE NEEDLE IN THE INTERNET HAYSTACK > I had to find an old apache forum: Re: Base64Encoder mx.util can not be found Flash CS5

  THE CLASS YOU MUST > who directed me to a site Github for Flex.  flex-sdk/Base64Encoder.as to develop apache/flex-sdk · GitHub

  There you can download the class file just to get the compiler errors to stop.  But your problems are not if you have used the full font and omissions in the direction of encryption of database ADOBE gives us boys and girls.  Noooope... More problems for you.  Laughing out loud!! So if you are a beginner and still confused about what to do then I'm sorry.  Because now I'll deliberately not tell you how to get all of this race.  I really want to use your anger me to steer towards ADOBE.  I shouldn't be the one to tell you how to use a basic function in their product.  They should be. They make billions of dollars on people like you and me pay for a poorly documented product.  Its time for this to stop and no one but we will get there.

  If you're angry now then I agree and feel for you, but let them do, not me.

  Good luck!!!

• Dangerous change in the approval process for iBooks

  you remember long time for approval of new iBooks users author books that publish their books on the iBook Store since the beginning. Originally, it was WEEKS, sometimes even months to get through the approval process. Fortunately, which improved considerably over time and now it's down to a period of 24 hours. remove your book from the store.

  I have published more than 17 books so far since the beginning of the iBook Store, and certainly, I look forward to this improvement. However, I just found out the hard way that this improvement comes with a terrible price.

  The new procedure:

  Is the approval process faster (not only) not due to more staff to go through the comments. Instead, it is due to an approval procedure has changed as it has been explained to me by the customer support. Now, the examiner spends less time going through the books to get quickly to the store. I don't know the details, but I guess they check the side more art if works and not actually reading it Word by Word.

  With this first less carefully past obviously comes a new stage. The Department for approval now takes books later (perhaps if they have more time or something) and check for any errors and delivers a ticket while your book is already on the iBook Store. In fact, at that time, that is not on the iBook Store more and this is the great potential disaster you should be aware of. If you get a ticket issued, your book get ripped the store until you propose changes and he crossed successfully a new review process, which could take days. It's wrong, really wrong, and he just happened to two of my books.

  Out of the blue, I got a ticket of the iBooks team for my book 'Logic Pro X - how it works', which lies on the line store since 2013 has been updated (and approved) last September. On one page, I had misspelled the name of "iBook" Store instead of "iBooks Store" and on another page, I got a link to the page of my book by asking readers to write a comment Amazon if they like my book. Of course, it was also a no-no (a multi-billionaire company referring to a competitor of billions of dollars with a link).

  I made the changes immediately and has the new version uploaded in an hour. But the review process took over 2 days, after I contacted support and recovery from the case. And here's the reason:

  At the moment they have issued the ticket, my book was not available on the iBook Store more, nothing, not even a mention that it is "temporarily unavailable" like Amazon. The visitors couldn't find the book, all the links from my Web site, twitter, facebook and other sites related, everything was made immediately a dead link. Not only did I lose money, I had to deal with customer e-mails explaining why they could not find the announced book. Last week, it happened with another book when I was in town for a week and had no files with me. And even once, it took 3 days to review the correction that I added 's' to the iBook Store.

  It is mind-boggling that the Team did iBook ' t think that through

  Why not keep the booking online during the update

  Why not give priority to the presentation (check two typos took longer than the initial review of the book).

  I asked the support team to issue feedback on this subject, so they can correct this procedure. In the meantime, you better watch for potential new tickets, or someone had the same problem already?

  HI Edgar,

  It's really good to know. Thank you

  Difficult to have a work around for this.

  (Got a ticket) Right now, I'm waiting for approval,

  After correcting a few minor problems.

  I hope this will get fixed soon.

  I like your idea to keep the original "approved."

  live version, until the update is approved.

  Should be a simple and logical

  changes to the procedure.

  Kind regards... Thomas

• Is there a solution of 1 button to change the display language in Windows 7?

  I am tired and sick do not receive do not answer to my question and my anxiety while you post as if respond you. You insult me. You make fun of posting me that you got a response to my concern and question yet I couldn't see any response what that it is displayed on this web page, nor do I found a link to any answer.  You are doing the public a say ' service.  If you are unable to answer my question on the open air, then at least send me an email to * address email is removed from the privacy *.

  Please SEND THIS If POSSIBLE to BILL GATES AND ALL OTHER MICROSOFT GURU OR MANAGER WHO CARES REALLY BRING of BILLION OF DOLLARS EXTRA to MICROSOFT OF the STRANGER.  OR AT LEAST SEND TO ANYONE WHO CARES MORE TO THE SUCCESS OF MICROSOFT AND THE FUTURE.
  My question to which I have still not got an answer was; If "Windows 7 Ultimate" has a button by which we could change the display language for windows with a single click in the computer. To change this through many steps are not an option for billions of nonEnglish speakers who doesn't understand enough about how to do these steps, so they decide that it is not worth to buy Windows in a foreing language to them, so they use just illegal free or cheep Windows copy from one computer to the other. They prefer windows in English, but only at certain times to have display in English and to be able to go to their native language at will. We want a button click on change of English in any foreign language major, on and before each time that decide us or want to change.
  Many steps in trying to change the display language is not an option. I am an English speaker fluent, but I like both French and Spanish. I have XP, but for me it is better to buy the Windows7Ultimate if he proposes a change to the language screen button click in windows. IT IS NOT AT ALL FOR ME TO BUY WINDOWS 7 ULTIMATE IF I Y GO EVERY TIME THROUGH THE PROCESS ENTIRE HEADACHE TO UNINSTALL ALL MY PROGRAMS AND WIDOWS AND INSTALL AGAIN JUST TO HAVE THE DISPLAY OF THE LANGUAGE I WANT AT ANY TIME I WANT.    BILLIONS OF PEOPLE ON EARTH DESIRES TO PASS ENGLISH LANGUAGE MORE THE WORLD AND THEIR OWN LANGUAGE THEY UNDERSTAND BETTER, TO SWITCH YOU AS MANY TIMES AS YOU NEED OR WANT IT, EVERY DAY WHEN DOES.
  It is not practical for us, nor possible because we do not have the time to uninstall windows or a 5 times language pack, or 6 or 7 times a day just so that we could switch between English and French or Spanish or Chinese-Mandarin Hindu SEVEN times per day that we might need. WE WANT to SWITCH BETWEEN WINDOWS DISPLAY LANGUAGE ENGLISH AND ALL OTHER MAIN FOREIGN LANGUAGE 100 TIMES a DAY IF WE FEEL WITH THE CLICK OF A button I LOVE and no one should stop us to do, and I mean that WE SHOULD HAVE THAT OPTION of BEING ABLE to DO so, BUT I'M NOT aware THAT WE DO.
  SO please LET ME KNOW IF I HAVE the OPTION with the HELP of THE OTHERWISE ULTIMATE de WINDOWS 7 IT does IS NOT INTERESTING for me to buy Windows7Ultimate since Windows XP, it's still as good or better.    About 5 billion people on earth or more do not speak English a lot understand enough - well BUT they would like to (and I will) to switch between the English and their (or my) native language in the display of Windows, several times per day whenever we want.
  Have we THAT the OPTION TO CHANGE THE DISPLAY LANGUAGE in WINDOWS WITH a SINGLE CLICK of a BUTTON AVAILABLE IN Windows7Ultimate OR NOT?

  
  That's what I need to know, but no one answered my question so far.  Don't give me more than a link to a web page where I could buy or download a language pack that I would have to install and uninstall 10 times a day if I want to change from English to Spanish or the French and return in English and Spanish, and so on 10 times a day.  This process is stupid and a waste of time and it is not difficult, if not impossible for most of us (of the billion of us). WE NEED AND WE WANT TO CHANGE THE DISPLAY LANGUAGE IN WINDOWS WITH A SINGLE CLICK OF A BUTTON AS MANY TIMES WE WANT EVERY DAY.  IF I PAY MICROSOFT A LOT OF MONEY IT SHOULD AT LEAST BE WORTHED.
  SO GIVE US WHAT WE WANT. ABOUT 5 BILLION OF US SPEAK NOT ENGLISH FAIRLY WELL, EVEN IF WE WISH TO PASS ENGLISH AND OUR LANGUAGES KINDERGARTEN ON, BEHIND 10 OR 20 OR 100 TIMES A DAY, AS WE CAN HAVE THE NEED OF THE DO.  We cannot simply install and uninstall some language pack 10, 20 or 100 times a day else we will not be able to do anything except waste our valuable time.  SO GIVE US WANT WE WANT.
  PLEASE DO NOT IGNORE US.
  PEOPLE IGNORED USES PIRATE WINDOWS WINDOWS TOOK A COPY AND DISSEMINATE OR INSTALLED IN HUNDREEDS OF THOUSANDS OF COMPUTERS. It's in your best interest, not to ignore the poor who are familiar with the English people or foreigners, who believes that if they can't buy the windows with this option (to BE ABLE to SWITCH THE DISPLAY LANGUAGE BETWEEN ENGLISH AND THEIR OWN NATIVE WINDOWS WITH THE click OF A BUTTON AS MANY TIMES as THEY WISH every DAY) , then it is not worth to buy it at all, but not worth it from one computer to the other side even if it is illegal.  This is the case today in most of the countries of the Earth. There are more illegal copies of Windows 98 and 2000 in use abroad as any copy of Windows abroad, for this reason = IT does IS NOT WORTH the MONEY WITHOUT THE SWITCHING "ONE click" of ENGLISH FOR FOREIGNERS AND BACK AND FORTH.
  You want to address this problem through the introduction of Windows 7 Ultimate, where you can change the language with the click of a button and worth to have the original of these windows, not you?
  -I would like to personally, otherwise I won't be wasting my time of Magor write you about the need to switch Windows language display to be made possible by a click of a button.
  IF YOU DON'T CARE ABOUT BILLIONS OF PEOPLE OVERSEAS WITH SUCH NEED AND DESIRE, THEN AT LEAST TO RESPOND TO A FEW HUNDREDS OF MILLIONS OF FANS OF MULTI LINGUIST OR - SPEAKERS MULTILINGUAL; AND DO YOUR MATH BY MULTIPLYING THIS NUMBER WITH $250 BY THE NEW COPY OF WINDOWS SOLD. (IT HAS TO DO WITH BILLIONS OF DOLLARS IN ANNUAL PROFITS). THIS MUST SURELY BE A VERY NICE HIKE IN PROFIT AND IN THE SHARES OF MICROSOFT.  BUT IF YOU WANT TO BE A LOSER OR A SABOTEUR FROM MICROSOFT, THEN GO AHEAD, CONTINUE TO IGNORE THE UNITED STATES AND OUR NEED. MANY OF MY FRIENDS BELIEVES THAT MICROSOFT MINDS AS CLEAR AS THEY ARE, don't ARE STILL NOT BRIGHT ENOUGH to MAKE POSSIBLE TEL NEED AVAILABLE - that is to say: to make possible the switch of the Windows display language from English to another major foreign language with a simple click on a button for us to be able to do is as many times a day as you could want.
  I tell my friends that they are wrong and that you can sell these windows.
  My second question is: ARE they HAVE RIGHT?  OR AM I RIGHT?   WHATEVER THEY ARE, JUST PLEASE GIVE ME ANSWERS TO MY QUESTIONS AND DID NOT GIVE ME ANSWERS TO QUESTIONS I NEVER ASKED. PLEASE, I BEG YOU.
  AND THIS MESSAGE IN ITS ENTIRETY TO BILL GATES (IF POSSIBLE) OR FOR CERTAIN EXECUTIVES OF MICROSOFT RESPONSIBLE AND WISE MAN WHO COULD AND ADDRESSES THESE ISSUES.   IF YOU WANT OUR MONEY OUTSIDE CANADA, PARTICULARLY OUR EUROS, THEN TO GIVE US WHAT WE WANT.
  A FRIEND far AWAY WHO JUST SEE WHAT I AM WRITING TO YOU, SAID: "IF THEY are not, THEN THE _ WITH ALL THEIR NEW WINDOWS BECAUSE WE're NOT GOING to BUY EVERYTHING FOR THE NEXT YEARS of 1O if IL VA y BEING MORE UPDATES OF OUR XP is or NOT."
  About me... maybe I'll stick with my XP for ten years but I could probably use it for the next seven years UNLESS I could buy a copy of the window earlier that allows the windows display language can be maneuvered with a single click of a button between English and French and in Spanish as many times as I wish every day and will without wasting my time to install and uninstall packages of language or reinstall the windows and all other programs I have installed in my computer again and again.
  Well, I hope you could help me with some concrete answers to my questions and good advice about this. IF you do not have available answers to our needs in the "Windows 7 Ultimate" then we should just waith for the next Windows coming after 7 Ultimate WITH the HOPE that you will take care of the major needs in the Windows thereafter, that follows after Windows 7 Ultimate.  Thank you for your time and I'LL WAIT for a RESPONSE FROM YOU.

  Hello danobadiah,

  Thanks for posting on the Microsoft answers Forum.

  I merged your nine positions in your last message as they treat everyone the same questions. You had your questions answered several different people in order to help answer your question. The answer to your question, "Windows 7" has a button by which we could change with a single click, the display of the windows in the computer language is 'no '. There's not a single button to make such a change in the display language in the way you described. Persons responding gave you the common way to the Windows 7 operating system works by changing from English to another language. We are not the developers in this forum and do not know if your desire to have a one button click on any major foreign language switch from English is a possibility.

  This is not the right forum to ask your question on a design change. If you want to offer developers a way to change the Windows 7 operating system, and then publish the Web site so that you can give your comments in future versions of the operating system.
  http://connect.Microsoft.com/default.aspx?LC=1033

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why is Microsoft so lazy? No Service Pack 3 for Vista. No Service Pack 2 for Windows 7, but now don't want to buy Windows 8? No thanks.

  I had to reinstall Vista last night after my computer started to report that there is no bootable devices found. It took most of the day to complete the fresh install. I had to download and install the Service Pack 1 and Service Pack 2, which took about an hour each. And then finally, Windows update started downloading another 115 separate updates. Who has 'more' of time to install.

  Why Microsoft does not release a Service Pack 3 for Vista? Or better yet, why do they not release something like "Windows Vista: Final Edition" that you can buy and it just install and done with it.
  Why a company that rakes in billions of dollars in software sales annually manage their software products at the end of life so sloppily?
  Windows 8 is already gone gold and I have heard nothing about when will be released Windows 7 Service Pack 2. It seems that Microsoft always has an eye on the future, but never on the present. Always eager to make new sales but never the support of existing products.
  When a product reaches a number of updates, a Service Pack must certainly be considered. And a final edition that integrates all product Service Packs must be taken into account. It would make life so much easier.

  If you want to provide information back to Microsoft, see the information here:

  http://www.Microsoft.com/mscorp/Execmail/feedback.mspx

• Microsoft Office (OEM) installed at the factory on a Dell computer

  Hello

  I am extremely disappointed with Dell and Microsoft.

  My 3 years old Inspiron 660 customer s had a hard drive failure. After replacing the hard drive, I proceeded to perform a factory restore. The recovery process has not worked!

  I was afraid that my customer has paid a lot of money to buy Microsoft Office when he ordered from Dell in 2013. I talked to Dell support and they confirmed that the factory-installed software is not included in the recovery partition. Dell do not provide software disks. I then talked with Microsoft and they said that they provide no downloads for OEM, only commercial versions. In addition, they understand the dilemma of my client and are sorry.  Now it's *!

  So here we have a classic situation where no company of billions of dollars will help a customer.

  I wonder what other Dell customers do when they lose software because of the failure of the hard drive?

  Thanks for listening to my rants.

  Innovation of PC,

  Have you tried the link below to download office?

  Desktop download

• Sound only works if I constantly change the volume control.

  Hello

  The sound on this Dell Inspiron One 19 t works only if I jiggle the volume control constantly.  The drivers are up to date and the only thing I can add is that this problem started when I reinstalled Windows 7 after a BSOD.  I tried to use Puppy Linux using a live CD, and even who could understand the question sound, even if it has detected the sound architecture right and everything is configured.  Just always had this problem.  So now I'm using Windows 7 and have installed all the updates and still I can't hear sound if I move the slider volume up and down.  It is therefore completely useless without good audio playback.

  I searched and searched on the internet and it doesn't seem to be a very common problem, and nobody is mentioning the same problem with the conexant smartaudio driver windows 7.  In any case... I'm a little sick of these computer things now... just full of bugs provided by companies billions of dollar, which tends to support you unless you pay them $ more.

  Please do not answer in an audio format or I won't be able to hear it :)

  The currently installed driver may be reported as the latest version, but he could have become corrupt and therefore not working properly.

  So, even if the driver is updated, you might find that download and install the driver from the Dell support site will fix the problem.