(Redirected) Reference DELL 5547 Fan starts while that closed down and drains the battery at 0%, especially may not wake from sleep

Similar Questions

• When I start most of the programs that is lock and on the taskbar it says program does not. How can I stop this from happening?

  When I start most of the programs that is lock and on the taskbar it says program does not.  How can I stop this from happening?

  Original title: Windows Explorer

  It is a good number with a boot drive (C:\ drive) that is cruelly of free space.

  A healthy walk NEEDS 20% free space at least to work properly and prevent your suspension system.

  Several causes are possible, but check your free space. Upgrade your hard drive if necessary.

  More RAM might help too.

  Check these before you attempt to update or install anything more.

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• Dell coming Pro 8 do not wake from sleep

  Hello Dell and everybody, my DV8Pro not waking from sleep. I had to press the power button for 10 seconds to start up again. Someone at - he found a solution to this? Reference dell is listening to its customers? Thank you.

  Try ' Qualcomn Atheros AR6004 WLAN adapt. "

  In addition, be careful not to disable "Wake on Magic Packet" and "Wake on pattern match.

  1. click on set to update driver

  2. click Browse my computer for driver software

  3. click on Let me pick from a list of device on my computer drivers

  4 uncheck Show compatible hardware

  5. choose Qualcom Atheros AR6004 WIRELESS network adapter
  

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• MacBook air only 8 months. Fan of work strongly and draining the battery. Do you have any troubleshooting. Pls help.

  My Macbook Air is only 8 months old. I only use it for word processing and surfing the internet. Yesterday, it started to make a noise maybe the fan. I've done all the troubleshooting steps described in Apple and to other useful sites, but nothing helped. Is it still fixable? What could be wrong?  Is this laptop still under vices? Please help as soon as possible. Thank you.

  This laptop is still under warranty.

  It may be a problem with the fan, but it can also be a problem of some adware or other infections.

  It would be useful to find when you download the application Etrecheck of etrecheck.com well known information

  It produces a list, you can share it to the clipoard and paste here.

• elitedesk 800 does not wake from sleep, performed a start rather

  HP EliteDesk 800 G1 USDT Win8.1 Pro 64-bit

  After the sleep mode to not wake up the keyboard or mouse click.

  Pressing the key Power performed a clean boot from the stop.

  Computer came with Windows 7 Pro. I installed Windows 8 since the disks provided with the computer and improved online at Windows 8.1. Everything seems to work fine, but the modes of Eve/hibertation.

  By pressing on a keyboard or screen sleep button apparently sends computer standby: the screen is black, white power button mouse and keyboard LED off, LED blinks once every two seconds.

  However computer not wakes up on a key on the keyboard and pressing a button / a computer turns on, but does boot upward as if it were completely off.

  Already checked for the latest version of the BIOS and enabled for keyboard and mouse power management.

  Hi Jaco,

  Thanks for your suggestion. I tried to experiment with the settings of power for the keyboard and the mouse, and simply made sure that both are enabled to wake the computer from sleep mode. I began to suspect that he may be the controller USB keyboard to wake the computer asleep, and I've experimented with a PS/2 keyboard without result.

  Then I reread in BIOS settings help mode "standby" should be indicated in triple LED flash, and I was getting only single blink of the LED, and I started to look into each option in Advanced settings of the power management and guess what I found?

  THE SOLUTION

  When I turned the sleep > allow hybrid sleep set Off, "sleep mode" started working:

  By pressing on the sleep button sends computer mode 'sleep', white LED travels triple flash and two seconds apart, and by pressing a key on the keyboard wakes the computer.

  Apparently my hardware configuration somehow comes into conflict with the Win8 hybrid sleep mode. SSD?

  HP EliteDesk 800 G1 USDT Core i7-4770 8 GB (2x4GB) DDR3 256 GB SDD,

  DVD +/-RW, keyboard, mouse, GigLAN,

  WIN8.1 Pro 64

  Thanks to all for lead me to this solution!

• Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

  I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

  Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

• Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1

  Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1.  Tried again several times since last week.

  BillBlackstone,

  KB982018 should be installed last, separately from other

  Install the 3 other updates manually

  Restart

  Back to updates of Windows and install KB982018

  Restart

  05/02 / 1108:16: 57 pm

• I noticed that many of my updates there is 2 times. The same exact. Can I safely delete those that are lined and exactly the same thing? Seems I don't need the same exact 2 and 3 updates times.__Thanks__Michael

  I noticed that many of my updates of widows is 2 times. The exact same ones. I can safly remove those that are lined and exactly the same thing? Seems like I don't need at the same time exact windows updates 2 and 3.
  Here's what are installed now that confuses me.
  Running vista Home premium
  version 6.0.6002 Service Pack 2 Build 6002
  PC x 64
  Intel Core 2 Duo CPU T5550 1.83 GHz, 1833 MHz, 2 Lossnay, 2 Log
  4.00 GB
  Microsoft Silverlight
  These files were add and remove.
  Update for Microsoft Visual C++ 2005 ALT kb973923 - x 6...
  Update for Microsoft Visual C++ 2005 ALT kb973923 - x 8...
  Microsoft Visual C++ 2005 Redistributable
  Microsoft Visual C++ 2005 Redistributable
  Update for Microsoft Visual C++ 2005 ALT kb973924 - x 8...
  Microsoft Visual C++ 2005 Redistributable - x 86 9.0.2...
  Microsoft Visual C++ Run Time Setup Lib
  Would it not be better to uninstall all these and start from scratch with Silverlight?
  Or!
  To uninstall only some?
  Very confused about this.
  Some tips would help a lot.
  I think I posted all the files that were related to this as well as information on the system.
  Thank you
  Member of 1care Michael B.

  Mike

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b9132e0a-31ad-4f3c-af7d-8719972453ab

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• (Redirected) XPS 13 Ultrabook wake from sleep!

  Hello!

  I have a Dell XPS 13 ultrabook I love, apart from a major problem. I can't seem to wake from sleep using the keyboard or the mouse. I never had this experience with a laptop before.  It is a pretty big problem, I use the XPS 13 has docked at the D3100 docking station and connected to an external monitor, keyboard, and mouse.  I keep the laptop with the screen closed and just use the external Setup - as you usually would when it is docked. Everything is fine until the device goes to sleep. If the computer is still on, but just the external monitor is turned off because the power settings, and then moving the mouse/hit the keyboard to wake the rear monitor. However, if the computer is idle (NOT put in hibernation), it nothing happens when I move the mouse or repeatedly hit the keyboard. I need to get out the ultrabook the cubby that's in, open, hit the power button, then close and replace. He gets the computer turns on again, but is incredibly annoying. As a side effect of this, all my windows get resized and my icons moved the Office because the latop temporarily switches to the built-in screen (which is at a resolution lower than my external monitor) before returning to the external display. I had the Latitude laptop for years without any problems and was disappointed with this experience. I really hope that there is some sort of fix.

  So far I have tried:

  1. connect the receiver of keyboard/mouse wireless in all USB ports on the ultrabook itself and also the dock of the D3100. No difference is made.

  2. try with a wired keyboard and wireless. No difference is made.

  3 tent to shoot to the top of the mouse/keyboard power management settings in device management and ensure "Allow device to wake the computer" is checked. Not possible, "Power management" tab appears now available in Windows 10 in the device properties window.

  Help, please!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• I downloaded the latest version 3 times and I still get a message saying that I don't have the version lasted. I can not open Pandora because of this. What Miss me?

  I downloaded the latest version of firefox 3 times and always get the message that I don't have the current version. I'm not able to open Pandora.com because of this. What Miss me?

  Hi cheryl28,

  It seems that the details of your system, would you say that you are still on version 3. How have you tried to update Firefox? There were errors during the update? You should look at Firefox updated to the latest version for more details.

  You can also try to go to http://www.mozilla.org/en-US/firefox/new/

  1. Download the full installer for 8.0.1 to your desktop.
  2. Closing Firefox. Remember that she is still ongoing in the background.
  3. Run the Setup program and re-open Firefox.

  Hope this helps!

• When I try to access Microsoft, my Internet Security provider tells me that this is a site without certificate - seriously? Microsoft may not have a certificate?

  Very frustrated and get VERY annoyed the monopoly total Microsoft have my PC. The system they have is beyond a joke. To change the password sign - "for my own safety', I need to enter the last 4 digits of my cell phone - to receive a 'code' to continue. Sometimes I don't get a code - OR I get an error message! Seriously? I could get into Fort Knox easier! I can't access my pc when I turn it on until I have enter the password - I LIVES ON MY OWN - that is trying to access my pc - the goldfish? I need to log in - but Microsoft have totally taken over my computer and I can't cancel the password. When I try to access Microsoft, my Internet Security provider tells me that this is a site without certificate - seriously? Microsoft may not have a certificate?

  Hi RF R,.

  Frustrating indeed sounds and it looks to me that you have two step of checking enabled for your Microsoft Account. Here are some instructions on how to disable it:

  On the two-step verification - Windows help

  I hope this helps!
  David

• NetBook XP, start-up stalls, must close and load the last well-known configni, no virus on check, no file of 0 k on check

  NetBook XP, start-up stalls, must close and load the last well-known configni, no virus on check, no file of 0 k on check.  Help!

  Hi Matthew,

  This is mcafee.  I uninstalled and reinstalled and now it works perfectly.  Thanks a lot for your help.  HPK

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry