(Redirected) Start Aurora R4 problem

So some time ago my computer could not initialize and beeps 5 times, I called support and basically told to get a new motherboard, my warranty has expired the previous month literally. So, want to fix as soon as possible got a new and had installed. But this has not fixed the problem, after much research I found that it's maybe my graphics card. So, now, I got the new graphics card and put it together with the new motherboard, it now starts at the Alienware logo with the loading bar screen, but it does not move. It will go to a black screen after awhile with a white underscore flashing, like its waiting for entry, but the keyboard does nothing, the computer makes a beep when I press cntrl alt dlt anything. So any help will be greatly appreciated, I feel like I'm close to it finally work.  Thank you in advance!

Better in this position in the Alienware owners Club Forum, here:

http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

Bev.

Tags: Dell Desktop

Similar Questions

  • (Redirected) Alienware Aurora R4 will not start windows, stuck in the endless start cycle

    I go give the situation leading to this problem in aid of casemit t.

    My computer started to slow down a lot, the computer crashed quite often in 2 different ways 1 the computer could hang with a message from windows saying that my computer ran into problems the second way, it would be a black screen saying no internal hard drive, also found if I leave my computer on for a while it would end in the 2nd type of accident or when I tried to come back and give the signal to pc can he would not return.

    After a few days when I started the computer windows started normally but it was extremely slow nothing loaded quickly a process that was normally a few minutes became hours.

    Then, I started in safe mode to reset my computer bug each time said he couldn't finish.

    Now when I turn on my pc I get the boot of alienware repeat infinitely, it beeps power up then a little later my devices will down and the lights on the pc and it will start again.

    I can't access the start menu when presiding f12,

    Best of this post in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • (Redirected) Alienware Aurora R3 / water damage / the amount of memory has changed... Problem

    Hi all

    Last night, I spilled water on top of my alienware desktop computer. I quickly shutdown, unplugged and held head down for awhile. First time I turned it back on, it gave me the "amount of memory has changed, but none has been added" problem. I went through system troubleshoot (F5 I think) and had everything to the point where it asks if you want to continue for 30 minutes. I skipped that and restarted. Second time I turned on my computer, it loaded all regularly, logged into my account, desktop screen with files, etc. Then he went straight to the screen of closing and began to beep, in the explosion of two. Whenever I try to start, stuck to the error page "the amount of memory" with two beeps.

    I tried a few searches and it seems it could be a motherboard problem, I'm not sure. I would like to email technical support, but it seems impossible without active coverage? (Mine is is no longer active).

    My question is, is it sounds like a problem of motherboard and if so, how can I replace it in my office? Where to get the part, etc.

    Thank you for your useful answers.

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • (Redirected) Power Alienware Aurora R4 problem

    My Alienware Aurora R4 light not after a black out home. I took it will be checked and technology, said that the power supply does not work. I decided to look for a power supply, but as I'm in Toronto, the Canada, it is difficult to find dell parts unless you buy online.

    I managed to find a PSU in my town that seems identical to that on my system, but I don't know if it will work on my system.

    Original Power Supply Model # H875EF-00 (that's the one that was inside the alienware aurora r4)

    I found - power supply model # H875E-00

    Two of these blocks of output 875W power but there is a difference on the sticker by reading the tensions here is the difference between the two models:

    Model # H875EF-00

    INPUT AC (50-60 Hz): 100-240V ~ / 12.5 A

    + 5V AND + 3.3V SHOULD NOT EXCEED 225W

    ---

    H875E-00 model says no.

    INPUT AC (50-60 Hz): 100-240V ~ / 14A

    + 5V AND + 3.3V SHOULD NOT EXCEED 150 W

    I would like to know if it is possible to replace the power supply with the model #H875E-00 in my Alienware Aurora R4. This power supply would cause computer damage or make one of the components do not work properly.

    Thanks for help you.

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Problem starting Aurora ALX of R4

    The system was purchased about 1.5 years ago.  Other than the problem "Alien-head and collar light remains lit after turning it off," I had no problem with it.

    About 3 weeks, began an intermittent problem.  When I turn on the computer by pressing the power button, the computer began (with the fans running, hard drive light flashing... etc) with the normal beep but, from time to time, the monitor doesn't give 'no signal' and stays black.  Otherwise anyone on the screen, the only thing I can do is a "hard stop" (ie pressing the button market for a few seconds).  I might have to do this 1 or 2 times before having to return the signal.  At this point, I get the message 'abnormal termination of window.  I choose "normal startup" and then go to the office with success.

    Things I did and said: -.

    1. replaced by a new DVI - DVI cable but the problem remains

    2. replaced by a cable DVI / VGA but the problem remains

    3. I tried a second DVI output port of the graphics card but the problem remains

    4 tried another monitor but the problem remains.

    These 4 tests seem to be saying that the monitor and cable are good.  The question seems to be elsewhere.

    -I can't reproduce the problem at will.  It happens every day.

    -Once the computer sends a signal to the screen, all right.  So, the problem is still in the computer, commissioning.

    -I can hear the beep, I think that the computer going to phase POST successfully.

    What could be the cause?

    I appreciate any feedback and comments. Thank you in advance!

    You can send me a private message with your Number of Service and contact information once you have determined if one or two cards must be replaced.

  • (Redirected) Start PC problem.

    Saving mode im trying to boot my PC and its keeps saying to enter. I have an alienware auora r4. I click the power button upwards and it said beeps entering power saving mode turns black then will keep beeping until I have shut it off. I have just updated graphics card all windows updates and I recently reset the whole PC and still can not understand because than his past again.

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • (Redirected) Alienware aurora r4 (end of 2011). My computer is the breaking of my gpu?

    Hi, I had trouble with my r4 Alienware Aurora (end of 2011). The original gpu was a 555 gtx, but I upgraded to an hd 7970 just a few months after I got the computer. This card lasted a year and the theanks to a three-year warranty, I got a new hd 7970 which also lasted about two years before he fell. Still, I got a new card of the company, that I bought, but this time, it was an x 280 r9. This card lasted about an hour before I started having accidents. I decided to send my computer to a company that troubleshoot computers and they concluded that it was the gpu that was broken and they couldn't find any problems with my other components so they think it was a mistake to plant on the r9. However this doesn't seem to be a coincedence, and I think that there is something in my computer that breaks my graphics cards.  Only one strange thing is that my original gtx 555 works perfectly.

    Has anyone else had this problem with their r4 aurora?

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • Start Mac graphics problem

    Hi I have an iMac mid-2011 with Sierra installed. I experience a problem during startup. When the progress bar reaches 1/3 of the total, it stops and displays a bar of color on the screen and immediately thereafter, the screen goes black for a second, and then return to the display of progress bar and the Mac end commissioning successfully however. I have attached the picture where the color bar is displayed. Thank you, Francesco

    My 2011 27 "iMac that makes for years and not had any problems. As long as the computer starts normally and works fine, leave it alone and don't worry.

  • Start Aurora in the desktop computers and modern views?

    Is it possible to launch Aurora into the office modern views and at the same time? When Aurora first introduced the modern vision, launch from a shortcut from the taskbar on the desktop Windows always open the desktop view, while the launch of the tile to start screen launched the modern vision.

    Is it still possible?

    The office and the app (modern) "Windows 8 Touch" now share the same profile. This means that you now have access to the same Favorites, history, saved passwords, etc. of these two applications. However, due to a limitation of our profile system, you can't run both at the same time while they share a profile.

    However, you can run both at the same time if you first create a separate profile for each application:

    1. Start the Profile Manager, create a profile named "desktop", then exit the Profile Manager.
    2. Create a shortcut to start Firefox with these command line arguments: P - Office - no-remote
    3. Use the shortcut to start Firefox using your profile "desktop."
    4. Use the normal icon of Firefox to run a second copy of Firefox using your default profile.
    5. Set up Firefox Sync if you want two profiles to have the same bookmarks and other data. (Treat the two "computers" as two different profiles following the installation instructions).
    6. In the default profile, use the menu item "restart in Windows 8 Touch' to switch to the modern application.

    I'm sorry that this process is so complicated! We want to make it easier to use both applications at the same time, but we will have to make some very complicated changes to our code for this purpose, it is not likely to happen quickly.

    For more advice and documentation on the use of profiles, see this article from community on the use of multiple profiles.

  • Stream HP laptop: starting flow Hp problem

    So I was reseting my hp running windows stream 10 and deliting all files more space on my laptop

    But when it was reset, a mensage appeared saying that the reset process was not over and a problem that happened...

    Welll, ive tried to start it after that, but it was just released the hp logo, starts and restarts again and again in a continuous cycle

    What should I do?

    Thank you

    It looks a bit like his do not booting from the USB, but the essential motivation.

    If you try to leave the trunk of the tablet itself to usb, this could be the problem.

    Have you tried to hit the Esc key to bring up the Start Menu, then select F9 for the boot device Options window?

    From there, you should see the USB key to select.

    Also, I first create a new installer for the tool of creation of media on this USB key, just to make sure its working and up-to-date.

    If you don't get it to start the USB key, at the beginning of the process, then I remove all to leave them and let him create what he must again.

  • Satellite M40 - starting after hibernation problems

    Hello
    I have a following problem, I used two OS linux and win xp, but one day, I decided to delete the linux partition, and there is the problem.
    I was using the LILO Boot Manager to switch between operating systems. After you delete the Linux partition, I run Win XP and selected Hibernate.

    Then the system is not successfully restore (probably a problem with the MBR after you have deleted the linux partition) and show that the screen full of strange characters.
    'C', "f12", changing the settings of the bios does not help because win xp hibernation somehow has a higher priority.
    For I can start from everything even to original Toshiba Recovery CD, because HDD ist first start eitherway.
    I had earlier experencied that when I put in hibernation Windows, the boot parameters changed in the BIOS where used first after I close Windows normally down.

    What can I do? Does anyone have an idea?
    Can I somehow my laptop out of hibernation while turning on the power?

    Thank you for your advice in advance
    Rafael.

    Hello Rafael

    Of course, you're very impatient. Joke!

    In my opinion, there is a problem with the MBR. If you start the device information stored in the MBR should give first info where is all the work saved on HARD drive (in hibernation mode).

    I n t have concrete solution, but if you don t want to use Linux, you should back up all your important data and reinstall the operating system using the recovery image. After that the unit will be clean preinstalled and everything will be perfect.

    Good bye

  • Re: Satellite L350-203 - start-up windows problems

    Hi, having a problem with this laptop. One day, when it would not start windows, it would go through the bar loading, then just a black screen and not progress any further.
    Tried to fix the operating system Vista with the disc that came with the laptop and restore to another date, but it wouldn't work. Also tried to boot mode safe but it hang loading "crcdisk.sys", so I used an ubuntu live CD to boot into ubuntu and back up my data so I can re install windows.

    Reinstalled vista, wipe the hard drive of all his scores in the process. It worked for a few days, but now the same problem happening again. Have tried to start in safe mode but still hangs on "crcdisk.sys.
    I also used tool of windows memory diagnostic to check the memory is OK, and also the software on the vista disc that checks the hard drive is in good condition as well, but these two tests came back fine.

    Does anyone have solutions?
    Very appreciated

    Matthew Gorst

    Hello

    The crcdisk.sys is a Microsoft Windows CRC disk file. I recommend doing:

    ! Insert the Vista Dvd disk into your ODD.
    2 select Repair
    3 then, command prompt
    4. type in the command prompt (all commands followed by Enter)

    Bootrec.exe /fixboot

    Bootrec.exe /fixmbr

    5 restart

    Hope it works

  • Satellite P500 PSPGSE - Start Power button problem

    Hello! Hi, I have a problem with my laptop!

    Power-start button on my usual (pspgse drivers) Toshiba p500 works, but when I use remote control work.
    A month AGO portable is in SERVICE of TOSHIBA in Serbia and they say that this is a problem in the bios and they Flash bios.
    But a mounting later same problem.

    It is not Bios are now what is the problem?

    Thanks in advance!

    Hello

    It might be the problem of equipment in my opinion, you should contact the ASP and should talk to the guys that this problem is not resolved.

  • Start Qosmio G20 problem

    I have laptop Qosmio G20, I got error message that my WinXP lost some system files and did not start. I tried to start Windows XP again (I lost the rescue floppy), but my Installer hunged up after 1 minute.

    I tried several other bootable disks including Linux but failed. I suspect this problem in BIOS, I downloaded the BIOS from the Toshiba site, but I have not found all the files PDF with instruction how to create bootable CDs for update of the BIOS listed on the Toshiba site.

    Maybe the problem is in CD/DVD recorder.
    What other way to start my Qosmio G20, I have no USB floppy?

    What do you think of hard drive? Is also possible that you have problems with hard drive?

  • start of the problem with hp pavilion dv5-1112el

    Good evening guys!

    I had a serious problem with my hp dv5-1112el running in vista.

    One a few days ago I had this problem when I start the laptop it was until after the presentation of the bios, I want to say

    After showing me "Press esc at the start of the menu...". "only after that nothing shoing just black screen!
    Two days ago, I found one when it's making like that if I go to the bios by F10 to press F9 to defult config it ok and today happens to come back but if I mak defult cong bios nothing happen the problem again!

    Please help me!

    Good evening guys!
    Finally, I found the solution for this problem after a few days on this subject!
    I suspect the bios from the beginning and that was the problem, the bios was not good, so I flash
    And the Flash was the problem causes most of the forum and the tutorial I did they are saying to download the update that unzip, rename the file name 3600.bin 3602f21.fd, but it is does not work so I improvise I download the latest version of the bios here
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75233-1&CC=it&DLC=en&LC=en&OS=2093&product=3841120&sw_lang=

    I have extracted it I have rename the second file name 3603F21.fd to 3603.bin
    I copy the file in my USB after that connect the USB to the computer
    on the computer by pressing the key win + B and after awhile the computer stop beeping and I restart (astala vist!) everything ok

    Thank you

Maybe you are looking for