(Redirected) Updating the bios of r4 Aurora... Help

So earlier today, that I've updated my r4 aurora to a03 to a11 bios as I had recurring problems with black projection in game that would reset then exit and we tried different things so thought that it might help. Stupidly I didn't flash the latest Verisions of bios by usb, I downloaded and installed the dell/Alienware program and made through the website, a03 to a05 it updated perfectly fine and starts perfectly but a11 a05 version 11 installed, but when he went to restart the fans were going to max and there is no answer. After a few minutes of nothing that I restarted the pc for him to start up a unable to detect the disc from the drive internal message and I cannot start my PC. I entered epsa and am running Diagnostics on my bench, I'm 96% pending hard disk 0-0-1 which, 95 to 96%, took about 40-50 minutes, so I have a feeling o might have bricked my hard drive (I bought a replacement hoping it is only this) and I am trying to create a recovery program of 10 Windows on a usb key. But apart from that, I'm stuck and need help. PS I can enter the bios menu, but if I try and run it on almost anything he says now start the good device.

Better in this position in the Alienware owners Club Forum, here:

http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

Bev.

Tags: Dell Drives

Similar Questions

  • (Redirected) Update the BIOS

    Cannot update the BIOS? I need last updated Bios for my DELL Inspiron one 19. It is not available on the drivers & downloads page.

    Hi James_884,

    Please repost this in the forum Office help.

    http://en.community.Dell.com/support-forums/desktop/f/3514

  • (Redirected) Activation of hardware assisted virtualization in the bios of alienware aurora (late 2009 model)

    Hi all, I wonder if someone can help me to activate it in bios? I ran ms HAV detection tool and my processor is capable, however, there is no option to enable it in the bios. After looking at the manual of the pc option isn't there either. I'm about to watch updated the bios, but I thought I'd throw the question out there as I watch.

    Thank you

    Better in this position in the Alienware owners Club Forum, here:

    http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

    Bev.

  • HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

    Hello

    WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

    Update driver BIOS update effective system is rebooted and the wifi does not.

    Please help me.

    In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

    Select the update that is dated from when you had the question.

    Click it to uninstall.

    You have to restart the laptop afterwards.

  • Satellite Pro A120: Need to update the BIOS after upgrade CPU

    Hello

    I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
    The laptop works very well, but for some reason any with the new processor fan runs always full.

    A lot, I searched but found nothing.
    The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

    THX in advance,
    John

    Hello

    First of all: update BIOS doesn t help you.
    Why do you think that BIOS update should help reduce the activity of fan?

    I guess that your new processor is faster. Right?
    So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

    By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

  • Updating the BIOS is dead the satellite Pro P300-1AY

    Hi all

    found this forum and really hoping that he can help me!
    I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

    A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

    However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

    But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

    And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

    Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
    Ty for your time in reading :)

    Hello

    > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

    Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
    This version is available for Toshiba FSA.

    So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
    Eventually, after this update the specifications would be stable.

    Good luck

  • Update the BIOS - protected A600 problem

    I'm trying to update my BIOS settings on my laptop (that I was invited to do by the service of Toshiba hardware update).

    I followed all the instructions provided by the program because it extracted and ran the update. However, the computer began the reboot process, but has been 'disconnected' windows (Vista Business) for about an hour now. I don't know how to stop the process without causing serious damage to my BIOS, but this does not seem normal.

    Help, please!

    Hi wilreb...

    I think that the user henharas a bad experience with the BIOS updates.
    I updated the BIOS many times and never had any problems...

    I assume you mean on Tempro software... this software informs you about updates on the Toshiba page. It is not a recommendation for an update, but simply an alert that new updates has been published...

    If your laptop is running properly, then update the BIOS is not really necessary...
    You must follow these tips; never change a running system ;)

    In any case, after the update of the BIOS shouldn't take too long and if she has completed, you should see the new version in the BIOS settings...

    Check it out...

  • Impossible to update the BIOS on Satellite A665

    Hello

    I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

    Please someone help me because I have no way to use the laptop without power still present.

    Hey Buddy,

    Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

    Try to update the BIOS on the pre-installed Windows version?

  • Portege R700 - cannot update the BIOS

    Hello
    I recently bought a Portege R700 19 M and I downloaded the latest BIOS version available in the Toshiba support page and when I run the .exe file, it does not work with this message: "the computer is not supported.
    And when I look in the HWSetup Toshiba tool, it does not display the BIOS version but some weird characters (letters not usual) so I can't find out which version is installed.
    Thank you for your help

    Hey Buddy,

    You update the BIOS to the version preinstalled Windows from Toshiba?
    Are you logged on as administrator when you try the update?

    To be honest I doubt a problem to update the BIOS because I found other threads where users report that BIOS update was successful.

  • Portege R600 - cannot update the BIOS using Win server 2008

    Hi all.

    Pls help...

    I tried to update my bios to the new version, but I can't.

    I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

    Package for the TOSHIBA BIOS ver.3.2.9
    Unsupported product type is installed.
    Package BIOS BIOS Version: Ver.1.80
    Current BIOS version: Ver.1.40

    So my question is what am I doing wrong? I'm trying to update my bios from windows.

    is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

    Thank you.

    Hello

    Your OS windows seems not to be the Windows which was preinstalled on your Portege
    You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

    You will need to put the system which has been pre-installed by Toshiba

    Good bye

  • Satellite A210 - update the BIOS didn't

    Hello

    Just tried to update the BIOS on my Equium A210, everything went well until the closing and restarting (which failed).
    He left me with a black screen and an orange to power lights, no back to zero and I only can we get rid of the orange light if I remove the battery.
    OK, what I'm doing now?... is this repairable?

    See you soon

    > OK, what do I do now?... is this repairable?
    Yes and no.

    You can't fix this, but the ASP technician can do that.
    Therefore, you will need to contact the ASP in your country, to solve this
    The technician would be able to Flash the ROM module and I think this should help you.

  • Satellite Pro 6000 - how can I update the BIOS?

    Hi all

    I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

    I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

    My questions:
    * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
    * Is it possible to update the BIOS with the same version of Windows?

    Or perhaps there is another solution for this problem? Has no need to update my BIOS?

    Thank you.

    Hans

    Hello

    I agree with Luke.
    The rom Bios module seems to be damage.
    Either it must be replaced or flashed again.

    But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

    You last chance is an ASP that could check the BIOS ROM.
    As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

  • Update the BIOS on a Tecra M5 - 386 when the battery is not recogised.

    My battery is not seen by my Tecra M5, but still fresh and feeds the laptop, I found info that offers as well as an upgrade of the BIOS might help, but the software update me gives an error message "[error] AC adapter is not connected, or battery power is not enough." How can I update the BIOS by bypassing the software security device? Told me on another forum that execution of the update .exe with /forceit BIOS in the CMD window that did not work. Can anyone help please.

    In most cases, the update of the BIOS does not solve battery problems
    Maybe the battery starts to malfunction because of age.

    I would recommend replacing the battery first!

    By the way; I guess the while the update of the BIOS error because of the software required missing; If you are using Win XP, then you must install page European driver of Toshiba common Modules. If you are using Windows 7 you must install VAP (value added package)

  • Qosmio G50-129 PQG55E - 64-Bit Windows 7 updated - update the BIOS?

    Hello

    I have a Qosmio G50 that I've upgraded to Windows 7 64 bit. My BIOS is unupdated for 6 months when I bought the machine.

    I went to update the BIOS, just to keep things updated, so I went through the pilot Online Assistant:

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    And all information entered above, it provides:

    http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20090312131718.zip

    After having unpacked and P0060v210.exe running, he extracted, and then said:

    "The [error] BIOS update is not taken in charge of operating system. No support for operating system or service pack is installed. "(Word to all my friends of Googling!).

    Toshiba has an update of the BIOS for the Qosmio G50 is supported on Windows 7? Specifically for the 64-bit? They need to fix this glitch which orders to download this file when it is not clearly supported by Windows 7.

    Also, I tried to run it in compatibility mode with Windows XP SP2 and it worked fine - but I was nervous about going through the update if it didn't initially support Windows 7, so I do not continue to the next prompt. Is it safe to do? Has anyone else in this situation he does without problems? I read the BIOS updates can go horribly wrong, if not careful, so I hesitate to update the BIOS by performing the update in compatibility mode when it doesn't support Windows 7 on its own!

    Thanks in advance for any help and Merry Christmas.

    Hello

    I agree with bljuzga_1.
    Because the BIOS is independent, it shouldn't be a problem with the update using Win 7 OS.
    The error must be linked to your installed Win 7 OS and not the BIOS bug.

    It would also be possible that your value added package for Win 7 is not installed correctly.
    This package contains the TOSHIBA components common driver which is an essential component of the Windows operating system. He will have to make the other original programming TOSHIBA works correctly.

  • HP 15 J9M32UA #ABA: update the BIOS

    HP Support Assistant lists an update to the system BIOS (Softpaq # SP76361, version F.28AP1).  I downloaded and installed and restarted when prompted.  No sign of defect to install-, BUT support Assistant continues to display a message that the update is available, and the Action log does not appear to be the update of the BIOS listed.

    MSInfo.exe displays the Version of the BIOS/Date as: Insyde F.28, 14/06/2016.

    Have I updated the BIOS?  If so, how can I do the instigation of shutdown Support Assistant to update?  If this is not the case, why have I not a failure message when I tried to update.

    Thank you

    Elaine

    Hi @E591,

    Thanks for posting HP forums!

    I read your post and wanted to help. I understand that there is a notification to update the BIOS on your HP Support Assistant and you attempted to perform the update, but she came back after restarting the laptop.

    It is not necessary to update the BIOS if the system is running right. You can reject the message of the HP Support assistant by clicking on the 'X' next to the update or message.

    Let me know if you need more assistance.

    If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

Maybe you are looking for

  • Why is my air conditioner for MacBook Air so strong?

    There is enough RAM on my macbook air, but the air conditioning is always really hard (bought in 2014). There is no exercise more what I do about it. Train to surf the internet. I already did a Reset of the SMC, but did not help much. Thank you for y

  • gel

    I have Thunderbird installed 28 on a new window machine 8.1 version.More frequently, the program seems to freeze when I'm reading the mail - this happens usually when the mail arrives.I tried to disable all add-ons and running in mode 'safe' - nothin

  • Question about reinstalling operating system via external USB CD/DVD

    Hi all. I need to reinstall the operating system on my portege m200, but I have a lot of problems: (1) the recovery DVD seems to not work on my external USB dvd drive(2) at the start, it is impossible run any OS on cd USB external dvd drive, so I can

  • Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

    I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start witho

  • Uncertain of Windows 7 disc

    I build a desktop computer for my own personal use, and I ordered a copy of Windows 7 Home Premium at Amazon. However, I have since checked and realized that it is an OEM version for systems integrators, and I now have my doubts about its use (I plan