Redirection port using two WAN 1 and 2.

Similar Questions

• I use two browsers, Firefox and Safari. What I need to install twice, once launch each browser?

  I use two browsers, Firefox and Safari OS x 10.9.4.  Do I have to install Flash twice - once to launch each browser?  Or the card lies in a sort of cache, connecting on any browser he committed?

  Hello maxlexs,

  No, you don't have to install twice.  The same plug-in lies in a location accessible by Safari and Firefox and works in both browsers.

  --

  Maria

• is it possible to use two external LDAP and authentication of external Table?

  Hi, is it possible to use both external LDAP and authentication of the external table?
  
  they all need two initialization blocks to access a session system variable, USER?
  
  Thank you

  Hello
  I don't think it's possible to impliment the LDAP authentication both extenal together. The reasons are,
  1. we cannot define two sources (LDAP and Extenal DB) in the same blocks of justine initialization user information.
  2. If two different (one for LDAP) initialization blocks and one for extenal DB are used, we cannot use variable USER twice it's a defined system variable.

  Thank you
  Swami

• Cloud Computing service using two machines, PC and Mac?

  I know that I can use the Cloud service on two computers, one at a time. But can we be a PC and a MAC?

  Yes.

  It is one of the benefits of the license of cloud on the traditional, perpetual software license.

  http://www.Adobe.com/au/products/creativecloud/FAQ.html

  Are there unique benefits that come with my subscription?

  Yes, as a member of the creative cloud, you get many benefits that you don't get when you buy a product traditional shrinkwrapped:

  • Expanding membership that provides access to the latest Adobe products, services, features and workflow as soon as they are available. You no longer have to wait for 12, 18 or 24 months for all the latest innovations.
  • Access to the Mac OS versions both Windows® desktop applications and the ability to install them on your main computer and a backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they do not work at the same time.

• How can I build a table using two digital controls and a button? Whenever I press the button, a column of 2 lines (digital orders) should be created.

  I tried several ways to date.

  I know that I can use the building to create a table of two numbers but I am not able to create a 2d in this way

  I also tried to use Replace subset of table, but still it won't work.

  I know that I have to use a table that has the index of the column starting with 0, so whenever I press the button of the column index incriments by 1 so the next column will change but I am not able to create this.

  You are the authority on what a Altenbach! He writes, I just did to make it work. Don't really consider this. Here's a modified version for the OP to use should he like:

  

• I rent the creative cloud for student. I use two devices iMac and Macbook. Can I install creative cloud on both devices?

  I appreciate your help!

  Hello

  Yes, you can download it on Mac/Windows computers. As subscription creative cloud is allowed to be used on two computers, but you cannot use it at the same time.

  You may please check out the link below to download the desktop app creative cloud.

  Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

  You can also see help document https://helpx.adobe.com/creative-cloud/help/manage-apps-services-desktop.html

  Hope this will help.

• RV220W - rules of access/redirection of port with multiple WAN IP addresses

  I just installed a Cisco RV220W - that works very well for outbound traffic, however for incoming it seems unable to work with multiple WAN IP addresses.

  We have a block of 6 WAN IPs assigned to us by our ISP, and I want to use each of them to expose certain ports on our servers to the outside world.

  I tried to do with rules (by using HTTP, for example) with the following parameters:

  Connection type: Inbound (WAN (Internet) > LAN (local area network))

  Action: Always leave

  Service: HTTP

  Source IP: Unique address

  Start:

  Send to the Server Local (DNAT IP):

  Use other WAN (Internet) IP address: disabled

  Status: Activated

  However, the port of the inaccessible Server/rest.

  I tried:

  • Restart the server with power power off again
  • implement the same port forwarding settings
  • triple-checking all the IP addresses used

  The only way that I have working is by changing the access rule so that it applies to any specific source rather than to another address... but this isn't a solution for us because we need to use specific IP addresses to the internal servers/ports specific.

  The interface of the router admin certainly suggests that this should be possible, but using it seems to break all incoming access!

  Any suggestion is welcome.

  You must use "ANY" as the source IP address, you publish your internal server to the internet and the internet means that the request comes from any source IP address (you don't know what it is, so that's all.

  Basically, you want any source IP to hit one of your WAN IP on port 80, and then your firewall will redirect the request to the internal private IP address of the server on the same port 80. And when the answer comes back internal server, the firewall will already have this translate entry in and reverse NAT won't happen (you must configure it, the default firewall function).

  I hope that I have answered your question.

  Please mark as correct, if you like the answer.

  Thank you

• The use of two monitors external and Tecra M5

  Hello

  I was employed to work with two screens of 17 "connected to a computer monitor in extended desktop mode, ii just changed job and now I have the following configuration:

  a Toshiba laptop connected to the Toshiba Tecra M5 docking station and an external 17 "monitor connected to the port of digital dockstation which works very well.

  I also have connected another monitor 17 "external to the Dockstation RGB port but Black Guard

  I ' ts really terrible work like this switching between the 17 "monitor and the computer monitor small toshiba laptop.

  What I would like is to work with the monitor two external 17 "and keep the laptop monitor off, or if possible.

  Any ideas?

  Any help will be very welcome
  Husband PAz

  Hello

  What docking station do you use?

  Advanced Port Replicator III or Advanced Port Replicator III more supports the use only if the laptop itself also support the simultaneous use of RGB & DVI.

  I don t think that Tecra M5 can do

• Tecra A9 and express port replicator - two external monitors

  Hello

  I have a Toshiba Tecra A9 laptop and a Toshiba express port replicator, the Replicator has two outputs DVI & VGA, but I just can't seam to allow them both to use my funds rather than 1 desktop computer screens and the screen of the laptop.

  Is this possible?

  See you soon

  Ash.

  As far as I know that something like this is not possible. The video signal may not be spited and sent to two video output ports. If you want to use two external monitors, you need an additional video source as Toshiba Dynadock or another solution.

• Linksys RV016 and two WAN (ADSL + cable)

  Is there a good description how to set up Linksys RV016 for two WAN (ADSL + cable)? Looks like switching between two connections do not crack what is defined to WAN1 and which is defined to WAN2.

  I put the like load balancing
  -WAN1 all HTTP to the top/donw (cable) should go
  -WAN2 (DSL) GTalk, IMs, SMTP, POP3, IMAP, high-low must go
  but as it does not work like that.

  When I go to speedtest.net and test a connection I always get less amount then connected directly by cable:------also when people try to use any session or IP: sensitive web site it won't let me connect because the session has expired (IP-based) or IP was changed.

  Thanks for any help.

  Hello.

  These products are processed by the Cisco Small Business Support Community.

  * If my post answered your question, please mark it as "acceptable Solution".

  * Do not forget to give a 'congratulations '. Thank you!

• Aggregate bandwidth of Sg500 two stacking using two stacking ports?

  Is the 2 Gbps of bandwidth when you use two stacking ports to connect the two switches?

  Two if you want that quick failover. Otherwise, a failure of the link will lead members of the dislocation pile. For the SG500, they go on S3 and S4. On SG500X, they go on S1 and S2.

• I used to write in two languages (English and Italan). When I use my Mac, it's easy: I just change the language, and my keyboard is the same (i.e., International English). What I use my iPad pro, instead, he also spends my hardware keyboard.

  I used to write in two languages (English and Italan). When I use my Mac, it's easy: I just change the language, and my keyboard is the same (i.e., International English). What I use my iPad pro, instead, he also spends my physical keyboard, so that for example if I type [keyboard I get an e. It is very annoying and makes the keyboard quite useless. Keeping fixed language I would get bad suggested words.

  You will need to define your physical layout being the same for English and Italian in settings > general > keyboard > keyboard > keyboard material

• Qosmio G does not recognize the mouse using two left USB ports

  I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

  The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
  He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

  In any case the mouse doesn't at all plugged into ports on the left side.

  Does anyone have any ideas as to why what is happening?
  Look of Sean.

  Hello

  Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
  Maybe you should do this to see if it could be a defective USP port.

  But I recommend to test this;
  First disconnect all USB devices
  Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
  Close all windows and restart the laptop.

  Finally the operating system should recognize the new devices (USB ports) again.
  Connect a USB device to one of the ports on the left and check if it would work.

  Good bye

  PS: What Qosmio do you have?

• Media Center Question can I have set up as a server and the other two as clients, each using two of the tuners of the card?

  I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.

  Any ideas?

  On Fri, September 19, 2014 12:28:56 + 0000, SamJ008 wrote:
   
  > I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.
  >>
  >>
  >>
  > Any ideas
   
   
  Start reading here
  http://TheDigitalLifestyle.com/w/index.php/2010/01/29/why-all-the-excitement-over-network-tuners/
   
  You will not be able to use your existing tuners like tuner network. Microsoft has
  arrested development of Media Center, so don't expect any new hardware/software to
  appear.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Close applications that use ports 80, 443, 8000, 8002 and 8004

  Operating system: Windows 7 Professional

  I set up a test server that is demanding that I closed all applications that use ports 80, 443, 8000, 8002 and 8004, because these are required by the Test Server. I don't know how to do this. Any help would be greatly appreciated.

  Best,

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads