Redownloading Photoshop Elements after the operating system upgrade

I plan on the Mac operating system upgrade and worry by the Photoshop Elements software I bought. I bought it as a digital download from Adobe, and she is saved under my ID code Adobe After I upgraded my operating system, can I use my current product serial number to reinstall items? I'm afraid that when I update, I could lose some of the software then I control everything before going through with it. I know that some companies allow you to use the numbers series/product once, and I don't want to have to buy again. Any advice/confimation I may or may not do this would be very appreciated

Hi Jobbers83,

Please disable your software by clicking Help > deactivate and then uninstall photoshop elements.

Then you can download photoshop elements and install on your system with the same serial number.

Thank you

Tags: Adobe

Similar Questions

  • LR6 maximum authorized computers after the operating system upgrade

    Hello

    I checked my file/etc/hosts. It is 'clean' after the default entries (no mention of any adobe or similar).

    I checked the GlobalSign Root CA, it is installed and active.

    I updated to MacOS X El Capitan for a few months, I suspect that is what causes the problem.

    I bought initially LR4 in April 2012, that still works and I can install and run on my new OSX El Capitan, no problem (except that it is old and has all the features of LR6).

    I bought the upgrade to LR6 in may 2015 and received a new n serial for this. It worked fine on my OSX Mavericks, but after upgrading to El Capitan LR6 asked me to validate whenever I started it, it failed with my improved serial no, but I was able to get to LR6 closing simply the activation window.

    Starting this weekend, it is not possible to enter LR6 more with above method. I get the message that Adobe is unable to validate my series or maximum authorized computers are reached, which is strange, as I have only been installed on one (one current with now updated OSX).

    On Adobe page support is it said to contact support, which turns out is not so easy. I phoned in a number that is given to me to buy LR, but no luck. Machine operator is a dead-end. This forum is the only option that comes to me when I ask for support on my pages / my adobe account.

    How to get support?

    Since other users here cannot help with activation of the serial number... you need to contact Adobe staff to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • 9380 blackBerry smartphones cannot start the App World after the operating system upgrade + card

    Hello

    my camera 9380 worked perfect when I bought it.

    Then I upgraded OS to v7.0.0.513 to 7.1.0.366-> BBM did not work

    So I drove back and re-installed 7.0->

    (1) maps: "error at startup net_rim_bb_maps: class 'net.rim.device.api.lbs.maps.ui.ManeuverFiled' not found.

    (2) BB App World must be closed

    any help?

    THX

    Hello and welcome to the community!

    I'm sorry, but the errors you posted seem somewhat independent... so I need clarification please:

    Gbassi wrote:

    Then I upgraded OS to v7.0.0.513 to 7.1.0.366-> BBM did not work

    Unfortunately, "did not work" is not really diagnosable. What, exactly, have you tried? What, exactly, happened every step of what you tried?

    Gbassi wrote:

    So I drove back and re-installed 7.0->

    (1) maps: "error at startup net_rim_bb_maps: class 'net.rim.device.api.lbs.maps.ui.ManeuverFiled' not found.

    (2) BB App World must be closed

    I do not see how these two errors are related to the first, you were trying to throw the maps app when it appeared? For the second, which came with the maps app? Or is separate #2 and lies somewhere in the process by using your AppWorld? Complete step by step of what you try, with a full explanation of what is happening at each stage, including the full text of all error messages, is essential to understand your situation and if all goes well to guide. Otherwise, we have to guess...

    So I guess. My guess is that, once you upgrade to 7.1, you don't have to perform a few extra steps to ensure that all services were properly enabled on your BB. Here are the steps. I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

    (1) registry HRT

    • KB00510 How to register a BlackBerry smartphone with wireless network
    • Please wait a 'registration' message reach your Messages application

    (2) remove and return Service directories

    • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
    • If you do not have access CMIME, continue deleting
    • KB02830 Send the directories for the BlackBerry Internet Service
    • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

    (3) restart to take batt

    • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! You can try these few points in your process... either now (on 7.0.0.513) or after you re - try to upgrade to 7.1.0.366.

    Good luck!

  • Missing photos after the operating system upgrade

    If iCloud backup has not been activated at the time of the upgrade of the OS, are still recoverable photos from iPhoto, or they are gone forever?  My Mac is 2 years old, and I installed the OS to El Capitan.  Time Machine can be used to retrieve these photos?  I looked in the trash, but it's only the deleted photos.

    Your photos have not been removed.

    If you previously used iPhoto, upgrade to El Capitan installed a new app called Photos. When you first launch Photos, it asks if you want to migrate your iPhoto photo library. If you keep your library in the default location (users > username > pictures), pictures will be automatically finds the old iPhoto library. If you have moved t elsewhere, launch Photos while pressing the Option key, and then select the main iPhotos library file to migrate.

    Migration is a slow process, so give it some time.

  • Applications of archived Smartphone App World blackBerry missing in My World after the operating system upgrade

    Today, I upgraded my Sprint 8830 of OS v4.5.0.135 to v4.5.0.175 of the OS.  Everything seems fine, except that none of my archived apps that I got from BB App World are appearing in my world, even if the files are still on the SD card.  In fact even the apps that I've installed and running do not appear in my world!  I turned off my BB, pulled the battery and rebooted but that did not help.  Also tried to uninstall and re-install App World - still nothing.  Any ideas?

    Thank you!

    Ahhh... the question arises of the root! For the visibility of paid apps installed (or archived or deleted) will be Ouvrezunesession AppWorld successfully. Sometimes she also displays then previous free apps - but who should never be counted on. Without logging, AppWorld is often present (but never showing paid apps) - free applications, but usually only those installed since the last installed AppWorld. However, even once, should not count on AppWorld retaining information about the free apps.

    Here is what I suggest - check your PayPal account... Log in since a PC/browser and make sure that the credentials you are using are the same as those that allows you to connect to MyWorld. Also to ensure that the credit card that you have set to PayPal is current and valid.

    If none of this works, you must open a ticket with RIM AppWorld formal support... to do this, follow these instructions exactly. Reach:

    and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. If you do not have an "order number" for that field, just use whatever it is (for example, '123456'). If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.

    See you soon!

  • BlackBerry Smartphones "Tasks" icon after the operating system upgrade

    Just upgraded (?) to os 5.0.0.771, 9000 "BOLD" on Telstra in Australia.

    This update was offered by an email from RIM.

    The 'Task' icon has now disappeared, and I can't sync my tasks with Outlook.

    Any ideas how I can get the 'task' back, or if I then try to re - install the update?

    Thanks in advance!

    John_Clark wrote:

    Simply plug the device back in to Desktop Manager and run the application loader.  Make sure you check the box for the tasks in the list of applications.

    Thanks, did it, didn't work.

    However, the upgrade was kind enough to do a backup, which I restored it, and now all fixed.

    Thanks for your help

  • ASM does not come after the operating system upgrade

    Hi all

    I am very new to Oracle, I had a test environment perfectly work on a virtual machine running RHEL5.8 and Oracle 11.2.0.4 on env single node.

    I then did an upgrade of the OS (with option of linux upgradeany) of RHEL5.8 to RHEL6.4. Update went well and on the side of the BONE, everything worked as expected.

    However, the ASM has no start (check with ps - ef | grep smon & pmon) and both returned nothing.

    Please suggest any difficulty which could help solve this problem. I'm willing to try any suggestions of command since it is a test area.

    Thank you

    Hello

    You must re-bind all the shared library. Take a look at this note: how to create a link to The Oracle Grid Infrastructure independent (reboot) Installation or Oracle Grid Infrastructure Installation/RAC of Cluster (11.2 or 12 c). (Doc ID 1536057.1)

    Kind regards.

  • HP Notebook: Wifi Signal very low after the operating system upgrade

    I bought the HP Notebook of month couple back. Due to the corruption of the OS, I had to reinstall the OS. Now, I am faced with two or three weird thigs

    1 WiFi signal reception is very low. Even if I'm sitting next to the router, I can only 1 or 2 bars on 5

    2 AMD Radeon graphics card is not detected. How do I solve this?

    Model: 15-ac076tx

    Thank you

    The answer could be linked to the reason that you had to reistall the OS, why did you have to reinstall the OS?

    You can also try the following:

    1. install the driver for both the wireless adapter and the graphics cards from the hp Recovery Manager and restart

    (for Recovery Manager, and recover - hardware driver reinstallation - select Driver Manager research - install)

    2. If the Recovery Manager reinstallation does not try to download the same drivers from the hp support site www.support.hp.com and install it and try it.

    Hope this helps,

  • My Apple Watch is frozen after the operating system upgrade

    Once my Apple Watch installed OS 2, it is now completely frozen with just the Apple logo on the screen. Help.

    Hello

    Press on & keep the Crown & the button as well in 20-30 seconds.

    See you soon

    Brian

  • Q10 Android blackBerry applications will not open or run after the operating system upgrade BlackBerry 10 version 10.3.1

    I have a BlackBerry Q10 when I install 10.2.1 even error now I upgraded then being same problem of android apps doesn't work is not or not work

    This 2558 displayed only for Z10, but I have a Q10

  • CS5 and the operating system upgrade to Windows 10

    I have Photoshop CS5 running on Windows 7 X 64. My operating system will be upgraded to Windows 10 in late July, through Windows Update. It will break my installation? I need to block the upgrade?

    Permanently disable before even trying! The activation system just don't like the changes made to the system, and most certainly will not work afterwards. A reinstall of the CS5 will probably be necessary anyway.

    Mylenium

  • Services apps does not start after Linux operating system upgraded to 5.0

    Hi guys,.

    I'm really new APPS DBA and I'm stuck with this prob for the last days... I searched a lot but couldn't find a solution to him... could u pls help me...

    In fact, the Linux operating system has been upgraded to 4.0 to 5.0 and the old instance that was workin on 4.0 is now wrong in 5.0.

    I arrived at the database starts, but when I tried to start the services, but some services does not seem to start... I posted the below error log file... any suggestions r welcome...

    >
    ****************************************************

    Activation of the service provider Oracle Discoverer DEL_server1 mode 2
    Service control script execution:
    /Oracle/D01/Oracle/delcomn/Admin/scripts/DEL_server1/addisctl.sh start
    Timeout specified in the context file: 300 second (s)

    script gave:
    ****************************************************

    addisctl.sh version 115.14

    /Oracle/D01/Oracle/Delora/8.0.6/vbroker/bin/osagent
    Osagent is already running.
    OAD is already running.
    Cannot start the Locator.
    Cannot bind to the ADO. Turn it back on...

    OAD is stopped
    Osagent is stopped
    Could not stop the Locator. No process id of file found.
    Could not stop the gatekeeper. No process id of file found.
    Could not stop the discoverer Sessions. No process id of file found.
    Cannot stop all preference discoverer. No process id of file found.
    Cannot stop any collector of discoverer. No process id of file found.
    /Oracle/D01/Oracle/Delora/8.0.6/vbroker/bin/osagent
    Osagent began.
    Osagent log messages in the oracle/d01/oracle/delora/8.0.6/discwb4/util/osagent.log file.
    Waiting for the ADO start...
    ADOS has begun.
    ADO record messages in the file oracle/d01/oracle/delora/8.0.6/discwb4/util/oad.log.
    Cannot start the Locator.
    Registration Session discoverer
    The Collector registration
    Apply preferences file: /oracle/d01/oracle/delora/8.0.6/discwb4/util/pref.txt
    Finished the application preferences
    closure of the registry...
    Synchronizing registry files...
    Registration of preference discoverer repository

    addisctl.sh: leave with the State 1


    .end std out.
    /Oracle/D01/Oracle/Delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version > GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Failed to initialize threads: cannot find class java/lang/Thread
    Could not create Java virtual machine
    /Oracle/D01/Oracle/Delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version > GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Failed to initialize threads: cannot find class java/lang/Thread
    Could not create Java virtual machine
    /Oracle/D01/Oracle/Delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version > GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Failed to initialize threads: cannot find class java/lang/Thread
    Could not create Java virtual machine
    /Oracle/D01/Oracle/Delora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version > GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
    Failed to initialize threads: cannot find class java/lang/Thread
    Not able to create Java VM
    .end err on.
    ****************************************************
    [Report on Service Control]
    The format of the report is:
    < Service > < Script > < status >

    Oracle DEL_server1 server Apache adapcctl.sh Started
    OracleTNSListener80APPS_DEL_server1 adalnctl.sh Started
    OracleConcMgrDEL_server1 adcmctl.sh Started
    OracleFormsServer-Forms60DEL_server1 adfrmctl.sh Started
    OracleReportServer-Rep60_DEL adrepctl.sh Started
    Oracle DEL_server1 Client Metrics adfmcctl.sh Started
    Oracle Server Metrics adfmsctl.sh Started DEL_server1

    Oracle DEL_server1 server performance jtffmctl.sh Started
    Oracle Discoverer services DEL_server1 addisctl.sh down
    Oracle restricts Apache Server DEL_server1 adaprstctl.sh disabled
    Oracle server Apache PL/SQL adapcctl.sh disabled DEL_server1
    Oracle SocketServer DEL_server1 TCF adtcfctl.sh disabled
    Oracle DEL_server1 ICSM ieoicsm.sh disabled
    ServiceControl dating status 1

    I guess upgrading the discoverer would be my last option... any ideas guys...

    As you use discoverer 4i... .only option is upgrading to 10g as indicated in the note, metalink mentioned by me in my previous post.

    Thank you
    JD

  • Reinstall Windows 8 after the operating system has bee corrupt. Need to down load already have the key.

    Hi all. I recently bought my laptop with Windows 8 64-bit with a registry key. The OS was corrupted now and I need to reinstall it. Can anyone help me by explaining the process of Windows 8 download with purchase and installation on my previous operating system damaged with complete hard drive format.

    If victory came preinstalled by the manufacturer of the laptop, this machine would have provided a way to recover as long as the plant, generally via a hidden restore partition, they would also provided instructions on how to create the recovery disks.

    If you have purchased MS win8 could have downloaded the installation file, which should be recorded on an external

    PS Win is often corrupt, which is usually caused by one or the other software problems or users of equipment

  • Requirements of the operating system upgraded to Photoshop CS4 CS5 on my mac.

    My mac is currently operating Photoshop CS4 with OS X Yosemite 10.10.5 version

    I have the opportunity to buy new unopened update to CS5 with required stated on the box: OS X 10.6 or 10.5.7

    I'd like to buy so I can improve my brushes (if limited in CS4).

    Should I or shouldn't I buy the upgrade and load?

    Hi valjonesart,

    We suggest you try first on the trial version of Photoshop CS5 on your Mac.

    Once you think of his work and love you so, yes you can go head and buy it.

    Download link for the trial: other downloads

    Kind regards

    Mohit

  • I had 6 licenses of XI ADobe pro 6 PCS that had been wiped out because of a vicious virus, and we had to format the whole PC HD without disassembly of the XI Adobe, how can I reinstall the Adbe on same PC after the operating system reinstallng

    I got 6 licenses of XI ADobe pro on 6 PCS that had been wiped out because of a vicious virus, and we had to format the whole PC HD without disassembly of the XI Adobe, how can I reinstall the Adbe on same PC after reinstallng the system of operating now, please advise

    Hi peterh53746581,

    You can download Acrobat XI Pro using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X & then serialize it using the serial key.

    Kind regards

    Nicos

Maybe you are looking for