Reduce the Touch Pad sensitivity in Windows 7

Similar Questions

• Stream laptop HP 11: after the update of windows 8.1 Windows 10, the touch pad does not work

  My Hp Notebook PC 11 Stream works fine on Windows 8, 1 until I updated to windows 10. Now the touchpad is dead. I have to use a USB mouse.  In Device Manager, all the drivers work fine. Any clue?

  Thank you for visiting the Forums HP's Support and welcome.

  Information below can help you

  Make sure your keyboard is on

  Check in the settings 'Mouse & touchpad' to ensure that the touchpad is enabled.

  Open the Settings menu (Start > settings) and go to devices > Mouse & touchpad. Scroll to the bottom of the screen, and then click additional mouse options.

  The mouse properties window opens. Click on the tab more far to the right (it may be called MOMENTUM ordevice settings). Under devices make sure your keyboard is not disabled. If it is disabled, click on the touch pad to select, and then click Activate.

  Another thing to try is to see if your laptop has a function button that enables / disables the touchpad. It should look like a tiny touchpad with a diagonal line through it (on my computer laptop is F6, on other laptops we Fn + F5, Fn + F6 , or something else entirely). Try to switch this key if you have before you panic on the misfortunes of possible touchpad.

  Update your drivers

  Windows 10 has been out for a few months now, and most of the manufacturers of touchpad have updated their drivers accordingly. But you may need to manually update your driver.

  There are two ways to do this. First, click on the Start button and select Control Panel. In the Control Panel window, open the Device Manager.

  By clicking on "update driver software... "will your computer Internet search for an updated driver.

  Best regards;

  Marcel

  I am an employee of HP

  Please click the White Star Kudos to say thank you for helping.

  Please check accept as Solution if my help has solved your problem.

• How to change laptop Gateway running Vista touch pad sensitivity?

  I have a laptop Gateway running Vista.  My problem is that when I try to use the touch pad, the screen jumps all over the place.  As if I was scrolling up or down very quickly.  Any ideas? Thank you

  * original title - help help my screen jumps *.

  Hi M.MARRIN,

  ·         If it works much earlier? If so, then remember to make changes to the computer, after which the issue started?

  If you run your finger vertically down the outer edge of the touchpad and then the scroll bar will be activated. If you do not want to use the scroll bar or if you want to reduce the sensitivity of the scroll bar, then you can try to modify the settings of the mouse. Take a look at the following link for more information or take a look at the manual that came with the computer and check how to change touchpad settings:

  Change the settings of the mouse

  I hope this helps.

• turn off the touch pad hp pavillion

  Hello!

  I have a HP pavilion g6-2240sq with windows 7.

  In the instructions that came with the laptop it says touch quickly 2 times a circle in the top left of the touch pad to turn it off. I tried, but it does not work.

  I want to disable the Touchpad, cause it gets in the way of typing.

  Can someone help me please?

  Thank you!

  Concerning

  It seems that you can run Windows 7 on a system designed for Windows 8 and you run without drivers TouchPad.

  HP Pavilion g6-2240sq Notebook PC Drivers & Downloads

  This does not explain it.  No worries.  This is not my personal specialty;  I have a couple of options for you.  If none of them does not work because the pilots have not features you need or the drivers don't work well on your machine, we can ask for additional help.

  Options:

  ===========================================================================
  

  • You might try your driver for Windows 8 running in compatibility mode.  Lot of software works in compatibility mode - if the driver for the TouchPad will be happy if this is something you can try or no--a personal choice.

  Download and do not install the device:

  Synaptics TouchPad Driver 16.5.3.3 sp61882

  How to install and run the drivers / software Compatilbility Mode:

  Drivers and software compatibility by AttackOfZaq mode running

  -----------------------------------------------------------------------------------------------------------------------------------

  Try this Windows 7 driver for a similar computer of the g6:

  Synaptics TouchPad Driver 15.3.11.0 sp53851

  • Download and press twice on the installation package
  • Restart / reboot the computer after installation

  Comment

  For something like this, it is best if you have an external mouse attached - it's common sense and not because of something flakey on occur.  It's like the race without a disc of recovery and personal backups: you can get away with it for years and then ONE day, Poof - here you are with a blank screen and no way to recover your data.

• Tecra A9 - sometimes I can not type - click using the touch pad

  There are times that I can not type - click using the touch pad or other keys (all of a sudden without any reason)

  I can move the cursor in this case but not tap - click here to be able to click once again, I have to restart (this happens on both windows and linux)

  On windows, I press alt + ctrl + del and when the Task Manager window I can tap it and after I do I can tap - Select something else and so on.
  Click on the Task Manager click on anything else until I reboot and the problem goes away just to appear suddenly unexpectadly at the same time.

  I have the newest bios and driver accupoint

  Any tips?

  This happens only with touchpad, or when you use an external USB mouse?
  For me it looks more like the Windows operating system freezes for a short period. Is this good?

• touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

  touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

  Hello

  It's material is not a Windows problems.

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
  is a toggle the TouchPad that it is enabled.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
  only once if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Is no longer, I could use the "scroll bars" on the touch pad to move the cursor up or down or back.

  I recently had my computer Dell XPS 'fixed' and when I came back I couldn't use the "scroll bars" on the touch pad to move the cursor up or down or back.  What can I do to remedy this?

  Thanks for any help you can give.

  Hello

  • What is the model of the laptop?

  I suggest you to update the latest drivers from the Dell website and check.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  You can also check this link:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_361927&isLegacy=true

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• HP 15 ab019na: clicking on the touch pad does not work

  My laptop newly purchased has just been upgraded to Windows 10. My problem is with the touch-pad. Clicking on most of the things with it (left or right) turn simply on the element, but it does not open the item. For example, the cross that appears in the top right, to a screen, to cancel this screen does not when you click on it. I have to touch it with my finger so he could work (the laptop's touch). A lot of hypertext links do not open when you click on it, but their contact works. The Start button at the bottom left does not open when you click on it, but it's when they are affected.

  Clicking is sometimes more convenient than touch, so I would if the issue is resolved.

  Hello @Gallant,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the issue of the TouchPad and wanted to help you!

  Please consult the following document and let me know how it goes:

  HP Notebook PC - using the touchpad and ClickPad (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Kind regards!

• How to change the default setting for the touch-pad?

  I have a HP Pavilion dv7 running Windows 7 Home Premium.

  I use it 99% of the time on your desktop, using a mouse instead of the key.

  Sometimes I forget to turn off the key by using the small dot in the upper left corner, which causes the movement of the cursor unexpectedly.

  Question: Is there a way to reset the value by default for the touch-pad to be inactive, and use the small point to activate the key only if I use the computer in a remote location?

  Thanks for any help on this.

  Larry

  Hi Larry,

  See if you have the following option.

  Open windows control panel, open the mouse, click the device settings tab and then click on the button "settings".  Click on the + next to the Touchpad disable Zone, and then click top left Action.  Click on the radio button for TouchPad Switch Off, click on apply and then click Ok.  Click apply and then click OK in the remaining window.

  This should enable the TouchPad on/off function to remember, so if you turn it off, it will be turned off after a reboot.

  Kind regards

  DP - K

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Satellite P series - I can scroll no longer using edge of the touch pad

  Please can someone tell me why I can't no more long scrolling using the edge of the touch pad.
  This seems to have taken place since I had to reinstall Vista due to a problem with low defective Ram.

  Thank you

  Hello

  One reason might be a missing touchpad driver.
  But if the touchpad driver has been installed, you should check the settings of the touchpad.

  In Control Panel-> mouse, you will find the touchpad properties. It should be the last tab.
  There you can check activate them and deactivate and configure many options.

  See you soon

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• How to disable the touch pad so I can use my wireless mouse?

  How can I disable the touchpad on my SONY VAIO now that I use a wireless mouse?
  The problem is that the cursor continues to jump back when I type, then this morrectiony sentence inserted into itself.  As a demonstration that I type this this setence without any c. REA touch pad is soplutiobn PLease help! L probme asnand I guess that this turning point
  It's the
  Help, please!
  Caroline Reid

  See http://esupport.sony.com/EN/tutorials/pc/cpvct000001_text.pdf (don't forget the warning to connect an external mouse before disabling the touchpad).

  Another version:
  http://GeekDrop.com/content/how-to-disable-the-touch-pad-on-Sony-VAIO-and-of-course-enable-it-again

• my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  Hi dove2k,

   

  Welcome to Microsoft Answers Forums.

  You will need to enable the touchpad on the laptop itself.

  Find the area of the touch pad, you will find a button to enable or disable the touchpad.

  If the step above doesn't, try this step.

  Go to control panel > mouse > device settings tab
  Click (or to disable)

  

  Notes:
  On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
  You can click on Reset device if none of these solutions work.

  If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to disable the TOUCH PAD

  I have a laptop of HP G42-475DX 62 bits. How can I deactivate my Touch Pad and just use the mouse? My problem is that while I'm typing touch pad cursor must jump into a paragraph & when I look up all of my text that I wrote is so a total mess, phrases running together etc. I would like to disable the Touch Pad.

  Facilities to turn the TouchPad depends on whether the driver supports.

  Go to the Control Panel, select mouse. If there is a device settings tab, you should be able to disable the TouchPad.

  Or see page 24 of the manual http://h10032.www1.hp.com/ctg/Manual/c02100456.pdf