redundant names of pxi resources

Similar Questions

• Error-1074118631 after driver update "the name of the resource is not attributed...". "PXI-6562

  I just updated my version 1.5.3 to 1.7.4 niHSDIO driver and now the device, a PXI-6562 is won't boot. I get the following error. The VI is suspended for 30 ~ 60 s attempt to initialize before the error occurs.

  Code: - 1074118631

  Message: niHSDIO Init generation Session.vithe name of the resource is not assigned to an instrument supported by NOR-HSDIO.

  The device worked fine with the old driver.

  Windows Device Manager indicates that everything is installed and working.

  I tried to write a simple VI by using new versions of the screw HSDIO and recreating the I/O resource menu drop-down.

  The resources dropdown lists the name as "PXI1Slot2".

  I can see the device in MAX thanks its location listed as "chassis: 1; Slot: 2 "

  The PXI-6562 has 2 LEDs on the front panel for 'access', 'active'. No lights during an attempt to initialize.

  I tried uninstalling the driver in Windows, reinstalling and restarting: same problem.

  I tried to use the device in Signal Express, and it produces the same error.

  I use LabVIEW version 8.5 and Signal Express 2.5.

  

  

  

  

  Does anyone know how to fix this?

  Thank you

  Arthur

  Hey Arthur,.

  You should also do a repair on the NOR-DAQmx driver for example, after you have repaired HSDIO. Let us know how it goes. Thank you.

  Kind regards

  DJ L.

• name of the resource programmatically

  I'm trying to get the name of the resource 'PXI1Slot2' PXI programmatically.

  How to get the handle whch viGetAttribute() object requires?

  viOpenDefaultRM (& rsrcHandle); Returns ViSession.

  Is there an attribute to get the number of accommodation?

  int CVICALLBACK FindResources (int, int int event, control panel,
  void * callbackData, int eventData1, int eventData2)
  {
  ViSession rsrcHandle;
  %%NumFound%% ViUInt32 shops.
  char InstrDescriptor [256];
  ViFindList MyFindList;
  int i;
  int chassis;

  switch (event)
  {
  case EVENT_COMMIT:

  First of all, log VISA.
  viOpenDefaultRM (& rsrcHandle);

  Now, to do an initial search. viFindRsrc returns the descriptor of instrument
  the first found instrument and the number of total resources found.
  viFindRsrc (rsrcHandle, "?") * PXI? * INSTR", & MyFindList, & %%numFound%% shops, InstrDescriptor);
  viGetAttribute (rsrcHandle, VI_ATTR_PXI_CHASSIS, frame);

  When you are finished, close the VISA session.
  viClose (rsrcHandle);

  break;
  }
  return 0;
  }

  According to the function panel, the object handle is a unique logical identifier for a session, list to find or event. So ViSession should be OK. But it seems that rsrcHandle is a session to the resource manager. You will need to use ViOpen to establish a connection with your device.

• Name of the resource does not COM port number

  Hello

  When I connect computer Board, I use

  ResourceManager.GetLocalManager (). FindResources("?*")

  to get resource name ("ASRL11::INSTR") and use that name that I invoke

  A session = ResourceManager.GetLocalManager (). Open (Name);

  to get the session and get the value of the property HardwareInterfaceName of the session.

  The problem is that the COM port number in the property ("Com10") of HardwareInterfaceName does not match name the resource. The COM port number is correct, that it is the same, as noted in the Windows Device Manager. But why the name of the resource 'ASRL11::INSTR', it should be "ASRL10::INSTR".

  Does anyone have an idea?

  Thank you

  Eva

  Hello

  Port 10 is reserved for the parallel port

  Curt

• Deployment of ADFLibrary: provide a unique name for the resources in this project

  JDeveloper 12 c.

  I'm deploying an application as a library ADF - it will be used my multiple applications.  So it's a bit generic. Sometimes it is OK and other times it gets stuck... See the ChangeLog

  What do mean exactly by ' resourceprovide a unique name of the indicated "? 

  What should I name the files?  xyz_abc_appNotices.jsff or the directory structure has to change?

  Thank you!

  Stuart

  [16: 38:44]-deployment began.  ----

  [16: 38:44] the target platform is Java EE Standard.

  [16: 38:44] analysis of the dependence running...

  [16: 38:44] building...

  [16: 38:48] deployment of profile...

  [16: 38:49] WARNING: the commonly named resources below could cause errors of reusability to your consumers.

  Provide a unique name for the resources in this project, or start with a different project.

  appNotices.jsff

  appNoticesMain.jsf

  [16: 38:49] Mobile WEB-INF/adfc - config.xml for META-INF/adfc-config. XML

  Well, Yes, it would do. The warning say you that your library resources should use unique names, that I hope are not used by other libraries. From the resources app Strip is common chance is that it will be a duplicate.

  Timo

• Name of dynamic resource for Excel/csv files

  Hi all

  Playback of a source (as well as csv) excel file, I tried passing the name of the resource via a variable that is defined to contain the name of the file (update). However, the performance, the file name with a character '-' extra without be specified in the interface variable text to deal with the load step.

  The error that says:

  ODI-1227: SrcSet0 (load) task fails on the source of the FILE connection < ConnNameHere >.

  Caused by: java.sql.SQLException: ODI-40438: file not found: C:\DirectoryNameHere\ /OTD.

  This is expected behavior where one needs to escape special characters?

  I checked that the extra / is not present in the value of the variable or the directory for the physical schema.

  TIA.

  Hello

  In my view, ODI generates the character ' / ' by default and I don't think we have any special treatment to escape this character.

  Based on the error message, it looks like you gave "C:\DirectoryNameHere\" in the directory in the physical schema. Lets say "SourceFiles" is your name of directory where all you produce will land and you want ODI to choose that path there, then directory will be "C:\DirectoryNameHere".  When you run the task, ODI generates path like this: "C:\DirectoryNameHere/OTD.csv."

  Kind regards

  KK

• Oracle/binding_permission_authorization_policy name of the resource

  Hello
  
  I was setting this policy and everything works fine if I specify
  
  
  Permission class: oracle.wsm.security.WSFunctionPermission
  The resource name:
  Action of permission: *.
  
  It is configured in the application with the application role related policies. Only users in the role are permitted to access the resource. I would like to link it to a specific resource now.
  
  
  I tried to change
  
  Resource name of: < < space of names > > / < < ServiceName > > # < < operation > >
  Action of permission: *.
  
  And
  
  The resource name for: *.
  Action of permission: call
  
  And
  
  Resource name of: < < space of names > > / < < ServiceName > > # < < operation > >
  Action of permission: call
  
  None of which work. I know that I have the correct namespace for the WSDL file and the name of the composite service and operation. They all give me permission errors. Any ideas?

  OK, an update, got the job by having the

  Name of the resource as > />

  Action as >

• task error 50103 name the specified resource is reserved

  Hi all.

  Let me tell you my configuration:

  software: Windows XP sp3, Labview 8.5 fr.

  material: chassis OR cDAQ-9172 with 4 modules installed (in this order):

  1 NOR-9217 (4 RTDs)

  2 NOR-9217 (4 RTDs)

  3 NOR-9219 (4 RTDs)

  4 NOR-9219 (4 RTDs)

  So, I want to acquire 16 temperatures.
  In MAX v4.3, all works well.
   
  As you have aspected, I got the famous 50103 error: "the specified resource is reserved. The operation could not be performed
  such as specified'. «Task name: unnamedTask<9>'.»»   -highlighting of module #2.

  My goal is to read these temperatures consecutively, I mean: mod1 ch0... Ch3, mod2 ch0... Ch3 and so on.
  My program (vi) is like this:

  In a while loop I have a stacked sequence Structure that has 4 frames, each for every DAQ Assistant asigned and configured

  for these modules.
  So I have: Assitant1 for mod1, mod2 Assistant2, and so on.
  Assistants work well in configuration overview mod (I see 4 temperatures on each module).
  But in my program, I got the error above, on module2.

  I read something about this error and I understand that I can not use 2 or more resources at the same time.
  I understand that a resource represents a channel on a module.
  At each end of the DAQ Assistant, I have a Signal from Split (split in 4)
  But with this setup and this algorithm, I guess I read all 16 channels in total consecutively, not at the same time.
  Am I wrong?
  How can I solve the problem?
  Thank you.

  You see that the resource is reserved error because you cannot create multiple tasks in doubles in your program.  Compact data acquisition with modules is essentially identical to one of our PCI/PXI data acquisition cards that you can have that one task duplicate to read from different channels.  So, what you need to do, is use a single daq Assistant and select the channels of all the modules you want to read.  I've attached a screenshot of how to select different channels.

• Find the name of the resource of the SMU-4143 NI

  Hello world

  Is there a way to find the resource name assigned by MAX using LabVIEW? I need to use niDCpower initialize wite channels VI to initialize a session with SMU-4143. This VI asks the name of resource assigned by measurement & Automation Explorer (MAX) of the 'PXI1Slot3' form as input. I'm not sure whether we can use VISA find resources to detect the PXI instrument. If so, the resource to find string exit VISA is a different format. How can I get the name of resource affected by MAX of this? Any ideas?

  You can use a constant DAQmx device name or a control.

  Or you can do deactivation:

  

• How to create names for VISA resources

  Create a VI to interface with a Tektronix Oscilloscope. Tek drivers all use and transmit handles instrument VISA Resource Name to the format.

  Yesterday, I simply plugged a text string with the characters of text on the Tek pilot and it's happy. String = "GPIB::12:INSTR".

  Today, LabVIEW dislikes this incompatibility of format, and I get an error of the pilot.

  My format of the string looks OK, but I have to do something wrong. None of the tools VISA simplty interrogate the device for his VISA resource name. How to do it?

  Thank you.

  
  

• How to change the name of provisioned resource account

  Hello

  In the custom connector that we have currently in place when an account is put in service the name of the account appears as a random value.

  How do change the name of the account funded from this random number to some loginid to say name invalid.

  Thanks in advance.

  Try the following steps:

  To change the name of the account to the account user id, you can follow the instructions below:

  1. open the form of the process of the resource that you want to display the user id as the name of account, instead of this strange number for example. UD_IPNT_USR

  2. create a new version of the form.

  3. go in the Properties tab.

  4. Select the user ID property and click on add property button.

  5. Select the account name and the value is false.

  6. save the form and make the version active.

  7 connect to IOM self-service console, select a user with iplanet account for her. You can see the user id of the account in the account instead of the strange number name,

• Name of building resource?

  Hey Gang,

  It was a frustrating day.

  I'm building an application driver for the PCI-6021 in native C++ code.  I use DAQmx driver inside.  It seems that the driver needs C (table of constant of type character) type strings for specifying "meter."

  Everything works fine when I created it below and which pass to the function:

  My meter [10] char = ' Dev1/ctr0. "

  But, I have to build the array of characters in molding and inserting integer variables for numbers of device and the meter.

  I can generate strings that have the right text in them, but I didn't understand how to cast that into a variable that will work with the command.

  I know it's more a matter of C/C++, but I will really appreciate any help.

  Thank you

  Roger

  Eureka!

  I've found a workaround.

  I create a table of character literals:

  numbers [9] char = {'1', '2', '3', '4', '5' ', 6',' 7 ', ' 8', 9'};

  int MyIntArg = 1;

  Then replace the character:

  MyCounter = ' Devx/ctr0. "

  MyCounter = [3] numbers [MyIntArg-1];

  Phew!  On the following problem!

  Roger

• Analysis of resources of RIO PXI chassis

  Hello

  I am trying to find a way to analyze all the resources of RIO in a PXI chassis programmatically.

  In my chassis PXI-1085, there FlexRIOs (7975R), but also the VSTs (5644R and 5646R).

  Using communication NI-VISA, I was able to communicate with all these modules, but only if an Alias is defined in NOR-MAX.

  I have'nt bee able to get RIO associated modules found resource name using 'VISA find resource' VI.

  Also, I have 2 questions:

  -Is it possible to communicate with my modules without defining an Alias in NOR-MAX?

  -How can I get the name of RIO resource programmatically?

  (I could put as an alias of VISA in NOR-MAX the same name as the resource name of RIO but it is very restrictive, the deployment of the application to other configurations)

  Thank you

  I'm guessing a bit here - but is it possible with the System Configuration screws? It's the library/tool box that allows you to get various information about a system (for example cRIOs - installed software) - there is a 'material to find' VI-I suppose you can point to your PXI and it will give you some information?

• Name resource RIO issue

  Hello

  I have a request to change the name of RIO resource (not the alias), I think that it is auto-generated and not something that I can put. If I'm wrong, someone could show me how and if I'm wrong can someone direct me to the documentation?

  Thanks in advance

  Emma

  Hello Emma,

  I'm Nick, an Applications Engineer at NEITHER.

  You are right, there is no way of choosing the name of RIO resource manually. It's the same principle as with port numbers.

  I don't see any of the documentation, it is implied, and also, that is why we have introduced aliases.

• Can not find the name of resource VISA

  I am trying to run the example code, provided by the manufacturer with a 3a Keithley 2420 SourceMeter.  It is turned on and put in place for 488,1 protocol GPIB.  It is connected to my computer via a GPIB KUSB - 488A cable.  On the front panel of the example program, there is a menu drop down titled "VISA resource name."  The two options at my disposal are LPT1 and COM1, but I don't think one of this is the name of the resource on the right.  Does anyone know what the name of resource VISA should I use with the Keithley, or how I can find this? If it helps, I have provided the example program I use. Thanks in advance!

  As a general rule, only the material NOR will be recognized in MAX and you wouldn't get any VISA resource for Auditors not - NOR. If there is a VISA for the Keithley driver, you can try to install as secondary visa driver and enable Tulip MAX. Keithley support support is the best place to ask questions about the installation of their hardware to LabVIEW.