Reference clock synchronization and clock of sampling (not LabView but Daqmx, Sync and C)

Well, I found an example that resemble what I wanted... in LabView: http://zone.ni.com/devzone/cda/tut/p/id/9308

Now the question is all about timing of the timestamps and sample:

Here is a list of ficelleStringString ficelleT of what I called...

  1. DAQmxCreateTask

  2. DAQmxCreateAIVoltageChan

  3. DAQmxSetRefClkSrc (used NISYNC_VAL_CLK10 = "PXI_CLK10")

  4. DAQmxRegisterEveryNSamplesEvent

  5. niSync_init (used a PXI-6682)

  6. niSync_SetAttributeViInt32 (used Terminal = NISYNC_VAL_PXISTAR0 and NISYNC_ATTR_1588_TIMESTAMP_BUF_SIZE = 3000)

  7. niSync_CreateClock (used Terminal = NISYNC_VAL_PXISTAR0)

  8. niSync_EnableTimeStampTrigger (used Terminal = NISYNC_VAL_PXISTAR0)

Now this list makes me able to create a timestamp every time the clock triggers a RISING edge...

Now how to synchronize these timestamps are useful for my sample? (I mean I need to sync my calendar with the PXI_CLK10 card) because for now prices will not match the sample rate.

ALSO... a little weird...

some of my cards will accept DAQmxSetRefClkSrc but others must use DAQmxSetMasterTimebaseSrc.

Now I can't use DAQmxSetMasterTimebaseSrc with PXI_CLK10... no idea why...

So, how did I would synchronize THESE cards...

Alright I could totally be wrogn with my approach, but I'm new with stuff of OR and using C isn't exactly the best documented piece of the NC.

Thanks in advance,

SEB

Thus,.

We have the same clock sampling for all of these devices, but we are not PLL'ing with the card of the S series, we cannot guarantee that they will all be in phase.  However, given that all of these devices would be based on the same reference clock, we would not drift when we started the task.  Would this work?

An alternative is to use the new X-Series card, which can also do a simultaneous sampling, but I don't know if it is feesible within your application.

Tags: NI Hardware

Similar Questions

  • export a sample or reference clock in c#

    Hello

    I'm looking for a way to export the clock reference for a particular device or the sample clock for a particular task to one of the PFI lines on my device in the series Mr. I'm programming in c#. I've seen methods such as

    DAQmxConnectTerms

    and

    DAQmxExportSignal

    for the C API, but no corresponding method for c#. According to the manual of the m-series 6259, I should be able to export at least a sample of a PFI line clock, if not the actual reference clock. Thank you.

    -Jon

    Jon,

    After a little more research, I found a method that might be even better for your application.  In the DaqSystem class, it has a method called "ConnectTerminals" that allows you to specify signals to connect together.  The syntax will look similar to this:

    DaqSystem.Local.ConnectTerminals ("/ Ctr0InternalOutput/Dev1", "/ Dev1/PFI1");

    You can find the documentation on it in Explorer of objects under NationalInstruments.Daqmx.DaqSystem.  Let me know how it might work for you.

    Kind regards

    Joe S.

  • generation of buffer desired waveform ╔chantillonnage clock and clock frequency sample resulting

    Hello, I'm trying to generate a square wave on an ongoing basis for NI6221 DAQ to 2 kHz. I use the example of Cont Gen tension Wfm - Int Clk.vi, which works great for my needs. However, the synchronization frequency setting is sometimes different frequency resulting, according to the choice of the samples and the Cycles / buffer. Tracking dozn the origin of these variables, all come from the nodes property of the moment-DAQmx in Buffere waveform generation (multi) .vi, where the input and output frequencies are not the same. Now, why is it so? What is the way the rate is calculated? I guess it's related to an internal approximation of the Council divided by sweep sampling frequency, clock but how exactly?

    I found some notes in the help (see figure), with a few diagrams of the oscillators according to the DAQ (M type) card, but then I'm lost.

    Thank you very much

    Virgilio

    The AO sample clock is generated by dividing down the time base.  If you select a clock frequency sample that can not be achieved by dividing the time by an integer base, the sampling clock frequency will be rounded up to the available sample rate nearest (it might be interesting to note that tasks HAVE always round the frequency rather than rounding to the nearest available).

    For example, the maximum time available for AO internal base is 20 MHz.  If you select a sampling frequency of 300 kHz, this wouldn't be possible (20 MHz / 66.66666...).  Instead, ~298.5 kHz will be used (20 MHz / 67).

    Best regards

  • PLL error-1074118135 could not phase-lock of the external reference clock

    I tried to block the generator of signals Vectoriels PXI-5671 until its source Ref in instead of the clock on board and it is the following error is received:

    Error 1074118135 has occurred to niRFSG wait until what Settled.vi

     

    Possible reasons:

    The converter has reported the following error:

     

    Measurements: PLL could not phase block for external reference clock.

     

    Make sure that your reference clock is connected and that it meets the specifications of the voltage and jitter. Additionally, make sure that the reference clock frequency is correctly specified.

    The clock source I use is the right frequency (10 MHz) and levels (I tried + 6 dBm and + 12 dBm). However, I was never able to get the 5671 to lock to the Ref in the clock source. Any thoughts?

    I haven't dived in the measure of the quality of the 10 MHz clock source that is fed to the VSG but it comes from a device of precision GPS timing, so I'm optimistic that the quality of the clock is within tolerances of the plug VSG.

    Hello tsileo,

    The 5671 requires that you provide it a square of 10 MHz wave which is free race to +/-0.5 ppm precision. I think that the amplitude levels look correct.  I would like to confirm the accuracy of your GPS unit's clock.  I also would ensure that free running clock is scheduled before the NOR-RFSG task.  According to the frame that you use, you might be able to try to connect to the clock of 10 MHz of the chassis with the REF in connector just to make sure that there is not something wrong with the device.

    Kind regards

    Paul C.

  • calendar and clock gadget does not

    Hello, my calendar and clock gadget does not work, the rest works ok, but the calendar is empty and the clock will not be displayed, I tried all the fixes, but nothing will work can some please help me.

    Hello

    Thanks for posting your query in Microsoft Community.

    From your description, it seems that the calendar and clock gadget does not work.

    I'll be happy to help you. This problem could be due, because if you have recently performed a system restore or if all missing or damaged system files.

    I suggest to follow the steps below and we update on the State of the question.

    Method 1:

    Follow the steps in the link below.

    Gadgets Windows 7 may not work or be displayed correctly:

    http://support.Microsoft.com/kb/2515657

    Method 2:

    To resolve the problem, please read the following steps to reinstall the Gadgets:

    a. click the Start button, select Control Panel.

    b. click on programs and features.

    c. click Windows turn on or off features in the left pane.

    d. Uncheck Windows Gadgets platform.

    e. click Yes to continue, and then click OK to exit. Then restart.

    f. open or turn off Windows features turn on again. Functionality in the Windows Gadgets platform.

    g. restart.

    For reference:

    Google Desktop Gadgets: Frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/desktop-gadgets-frequently-asked-questions

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • How to get the reference clock 10 MHz off PCI-5922

    Hello

    I'm evaluating PCI-5922 for the my request.

    In my application, PCI-5922 will get agilent signal 33250 function generator and the two instruments will be triggered at the same time with the same trigger signal.

    Is it possible to get out of the clock reference (10 MHz) off PCI-5922? If possible, the synchronization may be easier.

    I expect to get answers of experts!

    Zeehoon

    Hi Zeehoon,

    Before send you the unit for repair, please try one more thing.  The reference clock will be released not in fact until the task or acquisition is started or has committed at least.  Try to add a NO-SCOPE function commit after the property node where you set the reference clock output.

    Jennifer O.

  • clock radio does not not after updating to ios 10.0.1

    I have iphone 6 and after I update ios to 10.0.1 and now the clock works do not
    what I can do!

    Me too. Anyone else?

  • Satellite P300 - 18 M BSOD - clock interrupt was not received on a secondary processor

    Hi all

    Someone at - there that experince...

    Just got my P300 - 18 M returned by ASP, HARD drive replaced under warranty repair (1 month)

    They also clean installed Vista home32

    Am back today & put up, intermittently (at a few minutes of typical) the machine either completely crashes OR I get a blue screen saying "a clock interrupt was not received on a secondary processor" then restarts the machine and even in a few minutes.

    I can call ASP/Toshiba UK tomorrow, but more help would be anyones experience of it.

    Thanks in advance
    Andy

    I don t think you could solve by yourself.
    That sound very strange error message and I presume that this problem could be linked to the hardware problem possibly the issue of the mobo.

    It was a good choice to get back to the ASP allows to wait what will tell the technician this topic

    Good luck

  • stop 0 x 101: a clock interrupt has not received on a secondary processor within the allotted time interval.

    Hello guys I'm looking through these forums for a long time, but recently this bsod crossed the line: I am so angry and I want to know what the problem is. So I'm going:

    AMD Athlon Dual Core 6400 +.

    Biostar TPower n750

    Corsair 2048 MB 800 mhz

    GeForce 9800GT amp! Edition

    500 GB Maxtor Diamondmax22 hdd sata2

    screen 19' yuraku

    Ttied fi case Ariel (it looks like a beehive with air holes in the world) with a 120 mm fan on the back and another of 40 or 50 mm on the side

    EZ supercool source w 550

    LG dvdwriter, basic keyboard, basic optical mouse (logitech), basic logitech speakers

    Dynamode 11n wireless pci card

    I had installed on this pc WIndows Vista and after 1 year of error I coudnt repair it more.

    I hae errors on Xp before I bought a Vista and now I have installed Windows 7 as a test.

    Unfortunately, I received the error after 2 minutes of play Dark Orbit, the browser game. I noticed usually takes place when I play games the internet Explorer + or sometimes games + winamp.

    I downloaded Windows Dbg and I started to analise errors: the results have been different because of some programs I had installed.

    After reading a few reviews here, I've changed my antivirus AVG and my Ad-Aware malaware spyware Defender.

    After these changes and installing windows 7, the error is like this. I will introduce the last and 4 that I analyzed:

    Error 1

    Loading dump file [C:\Windows\Minidump\120410-23680-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 7 Kernel Version 7600 MP (2 processors) free x 64
    Product: WinNt, suite: TerminalServer SingleUserTS
    By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
    Computer name:
    Kernel base = 0xfffff800 '02a5c000 PsLoadedModuleList = 0xfffff800' 02c99e50
    The debugging session: 23:49:17.592 Sam 4 Dec 2010 (UTC + 0:00)
    System Uptime: 0 days 0:17:39.294
    Loading the kernel symbols
    ...............................................................
    ................................................................
    .............................
    Loading user symbols
    Loading unloaded module list
    .....
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    Error checking 101, {61, 0, fffff880009ea180, 1}

    Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

    Follow-up: MachineOwner
    ---------

    0: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    CLOCK_WATCHDOG_TIMEOUT (101)
    An expected clock interrupt was not received on a secondary processor in a
    MP system in the meantime allocated. This indicates that the specified
    the processor is hung and not processing interrupts.
    Arguments:
    Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
    Arg2: 0000000000000000, 0.
    Arg3: fffff880009ea180, address the PRCB of the Hung processor.
    Arg4: 0000000000000001, 0.

    Debugging information:
    ------------------

    BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    Nom_processus: System

    CURRENT_IRQL: d

    STACK_TEXT:
    fffff800 '03fed938 fffff800' 02a7a443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
    "fffff800 '03fed940 fffff800' 02ad65f7: fffffa80 00000000' fffff800 ' 00000001 00000000'00002710 fffff880 ' 014de980: nt! : FNODOBFM: 'string' + 0x4e3e
    fffff800 '03fed9d0 fffff800' 02a1d895: fffff800'02 has 42460 fffff800 '03fedb80 fffff800' 02a 42460 00000000 00000000': nt! KeUpdateSystemTime + 0 x 377
    fffff800 '03fedad0 fffff800' 02aca3f3: 00000000 00000000' fffff800 '03fedb01 fffffa80' 025e9f00 00000000 00000001': hal! HalpHpetClockInterrupt + 0x8d
    fffff800 '03fedb00 fffff880' 03d531f2: fffff800 '02adba3a 00000000 00000000' fffffa80' 02dfc868 00000000' 00000000: nt! KiInterruptDispatchNoLock + 0 x 163
    fffff800 '03fedc98 fffff800' 02adba3a: 00000000 00000000' fffffa80 '02dfc868 00000000' ffffd399 00000000' 2e217e22: amdk8! C1Halt + 0x2
    "fffff800 '03fedca0 fffff800' 02ad66cc: fffff800'02c46e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 00e45f44: nt! PoIdle + 0x53a
    fffff800 '03fedd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

    STACK_COMMAND: kb

    SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: Unknown_Module

    Nom_image: Unknown_Image

    DEBUG_FLR_IMAGE_TIMESTAMP: 0

    FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    Follow-up: MachineOwner
    ---------

    0: kd > lmvm Unknown_Module
    start end module name

    Error 2
    Loading dump file [C:\Windows\Minidump\120410-26598-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 7 Kernel Version 7600 MP (2 processors) free x 64
    Product: WinNt, suite: TerminalServer SingleUserTS
    By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
    Computer name:
    Kernel base = 0xfffff800 '02a 56000 PsLoadedModuleList = 0xfffff800' 02c93e50
    The debugging session: 23:30:52.882 Sam 4 Dec 2010 (UTC + 0:00)
    System Uptime: 0 days 0:04:50.584
    Loading the kernel symbols
    ...............................................................
    ................................................................
    ...............................
    Loading user symbols
    Loading unloaded module list
    ....
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    Error checking 101, {61, 0, fffff880009ea180, 1}

    Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

    Follow-up: MachineOwner
    ---------

    0: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    CLOCK_WATCHDOG_TIMEOUT (101)
    An expected clock interrupt was not received on a secondary processor in a
    MP system in the meantime allocated. This indicates that the specified
    the processor is hung and not processing interrupts.
    Arguments:
    Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
    Arg2: 0000000000000000, 0.
    Arg3: fffff880009ea180, address the PRCB of the Hung processor.
    Arg4: 0000000000000001, 0.

    Debugging information:
    ------------------

    BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    Nom_processus: System

    CURRENT_IRQL: d

    STACK_TEXT:
    fffff800 '00b9c938 fffff800' 02a 74443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
    fffff800 '00b9c940 fffff800' 02ad05f7: fffff880 ' fffff800 00000000' 00000001 00000000'00002710 00000000'00000000: nt! : FNODOBFM: 'string' + 0x4e3e
    fffff800 '00b9c9d0 fffff800' 02a 17895: fffff800'02a3c460 fffff800 '00b9cb80 fffff800' 02a3c460 00000000' 00000000: nt! KeUpdateSystemTime + 0 x 377
    "fffff800 '00b9cad0 fffff800' 02ac43f3: 00000000'00000000 00000000'00000001 fffffa80 ' 00000000 fffffa80 ' 031e6450: hal! HalpHpetClockInterrupt + 0x8d
    fffff800 '00b9cb00 fffff880' 03e2a1f2: fffff800 '02ad5a3a 00000000' ffffffed fffffa80 '02d280a8 fffff800' 02c4ec40: nt! KiInterruptDispatchNoLock + 0 x 163
    fffff800 '00b9cc98 fffff800' 02ad5a3a: 00000000' ffffffed fffffa80 '02d280a8 fffff800' 02c4ec40 00000000 00000001': amdk8! C1Halt + 0x2
    "fffff800 '00b9cca0 fffff800' 02ad06cc: fffff800'02c40e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 03d0f480: nt! PoIdle + 0x53a
    fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

    STACK_COMMAND: kb

    SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: Unknown_Module

    Nom_image: Unknown_Image

    DEBUG_FLR_IMAGE_TIMESTAMP: 0

    FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    Follow-up: MachineOwner
    ---------

    0: kd > lmvm Unknown_Module
    start end module name

    Error 3
    Loading dump file [C:\Windows\Minidump\120410-36207-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 7 Kernel Version 7600 MP (2 processors) free x 64
    Product: WinNt, suite: TerminalServer SingleUserTS
    By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
    Computer name:
    Kernel base = 0xfffff800 '02a0f000 PsLoadedModuleList = 0xfffff800' 02c4ce50
    The debugging session: 23:25:27.991 Sam 4 Dec 2010 (UTC + 0:00)
    System Uptime: 0 days 2:14:52.692
    Loading the kernel symbols
    ...............................................................
    ................................................................
    ..............................
    Loading user symbols
    Loading unloaded module list
    .....
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    Error checking 101, {61, 0, fffff880009ea180, 1}

    Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

    Follow-up: MachineOwner
    ---------

    0: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    CLOCK_WATCHDOG_TIMEOUT (101)
    An expected clock interrupt was not received on a secondary processor in a
    MP system in the meantime allocated. This indicates that the specified
    the processor is hung and not processing interrupts.
    Arguments:
    Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
    Arg2: 0000000000000000, 0.
    Arg3: fffff880009ea180, address the PRCB of the Hung processor.
    Arg4: 0000000000000001, 0.

    Debugging information:
    ------------------

    BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    Nom_processus: System

    CURRENT_IRQL: d

    STACK_TEXT:
    fffff800 '00b9c938 fffff800' 02a2d443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
    fffff800 '00b9c940 fffff800' 02a895f7: fffff880 ' fffff800 00000000' 00000001 00000000'00002710 00000000'00000000: nt! : FNODOBFM: 'string' + 0x4e3e
    fffff800 '00b9c9d0 fffff800' 02ff6895: fffff800'0301 b 460 fffff800 '00b9cb80 fffff800' 0301b 460 00000000 00000000': nt! KeUpdateSystemTime + 0 x 377
    "fffff800 '00b9cad0 fffff800' 02a7d3f3: 00000000 ' fffff800 00000202 '02a859fa fffffa80' 01bd6c20 fffff800 ' 02bb42dd: hal! HalpHpetClockInterrupt + 0x8d
    fffff800 '00b9cb00 fffff880' 03fb71f2: fffff800 ' 02a8ea3a 00000000' fffffa80 0000001e ' 02e88398 fffffa80'03122480: nt! KiInterruptDispatchNoLock + 0 x 163
    fffff800 '00b9cc98 fffff800' 02a8ea3a: 00000000' fffffa80 0000001e'02e88398 fffffa80 ' 03122480 fffffa80' 0455 c 410: amdk8! C1Halt + 0x2
    fffff800 '00b9cca0 fffff800' 02a896cc: fffff800'02bf9e80 fffff800 ' 00000000 00000000 00000000' fffff880' 0416 c 480: nt! PoIdle + 0x53a
    fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

    STACK_COMMAND: kb

    SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: Unknown_Module

    Nom_image: Unknown_Image

    DEBUG_FLR_IMAGE_TIMESTAMP: 0

    FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    Follow-up: MachineOwner
    ---------

    0: kd > lmvm Unknown_Module
    start end module name

    Error 4

    Loading dump file [C:\Windows\Minidump\120510-17550-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 7 Kernel Version 7600 MP (2 processors) free x 64
    Product: WinNt, suite: TerminalServer SingleUserTS
    By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
    Computer name:
    Kernel base = 0xfffff800 '02a 67000 PsLoadedModuleList = 0xfffff800' 02ca4e50
    The debugging session: 00:15:22.449 Sun 5 Dec 2010 (UTC + 0:00)
    System Uptime: 0 days 0:25:01.151
    Loading the kernel symbols
    ...............................................................
    ................................................................
    .............................
    Loading user symbols
    Loading unloaded module list
    .....
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    Error checking 101, {61, 0, fffff880009ea180, 1}

    Probably caused by: Unknown_Image (ANALYSIS_INCONCLUSIVE)

    Follow-up: MachineOwner
    ---------

    0: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    CLOCK_WATCHDOG_TIMEOUT (101)
    An expected clock interrupt was not received on a secondary processor in a
    MP system in the meantime allocated. This indicates that the specified
    the processor is hung and not processing interrupts.
    Arguments:
    Arg1: 0000000000000061, Clock interrupt time out interval in nominal graduations.
    Arg2: 0000000000000000, 0.
    Arg3: fffff880009ea180, address the PRCB of the Hung processor.
    Arg4: 0000000000000001, 0.

    Debugging information:
    ------------------

    BUGCHECK_STR: CLOCK_WATCHDOG_TIMEOUT_2_PROC

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    Nom_processus: System

    CURRENT_IRQL: d

    STACK_TEXT:
    fffff800 '00b9c938 fffff800' 02a 85443: fffff880 00000000'00000101 00000000'00000061 00000000'00000000 ' 009ea180: nt! KeBugCheckEx
    fffff800 '00b9c940 fffff800' 02ae15f7: fffffa80 ' fffff800 00000000' 00000001 00000000'00002710 fffff880'01673837: nt! : FNODOBFM: 'string' + 0x4e3e
    fffff800 '00b9c9d0 fffff800' 02a 28895: fffff800'02a4d460 fffff800 '00b9cb80 fffff800' 02a4d460 fffffa80' 00000000: nt! KeUpdateSystemTime + 0 x 377
    fffff800 '00b9cad0 fffff800' 02ad53f3: 00000000'00000000 00000000'00000001 fffffa80 '00000000 fffffa80' 03265340: hal! HalpHpetClockInterrupt + 0x8d
    fffff800 '00b9cb00 fffff880' 03cb01f2: fffff800 '02ae6a3a 00000000 00000000' fffffa80' 02d9f7e8 00000000' 00000000: nt! KiInterruptDispatchNoLock + 0 x 163
    fffff800 '00b9cc98 fffff800' 02ae6a3a: 00000000 00000000' fffffa80 '02d9f7e8 00000000' ffffd399 00000000' 2d666e22: amdk8! C1Halt + 0x2
    "fffff800 '00b9cca0 fffff800' 02ae16cc: fffff800'02c51e80 fffff800 ' 00000000 00000000 00000000' fffff880 ' 00c0bf44: nt! PoIdle + 0x53a
    fffff800 '00b9cd80 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c

    STACK_COMMAND: kb

    SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: Unknown_Module

    Nom_image: Unknown_Image

    DEBUG_FLR_IMAGE_TIMESTAMP: 0

    FAILURE_BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    BUCKET_ID: X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

    Follow-up: MachineOwner

    Hello

    I suggest you to clear the CMOS and reset the BIOS to default settings. Contact the system manufacturer for assistance.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error blue screen "a clock interrupt was not received on a secondary prossesser in the allotted time interval.

    I get a blue screen that says that this A clock interrupt was not received on a secondary prossesser in the allotted time interval

    * original title - an interruption of clock has not received on a secondary owner in the amount of time allocated Windows stops and I get a blue screen that says this *.

    It is likely that your CPU is a failure.

    However, before replacing, try this

    1. If you are overclocking the processor, back to normal speed
    2. To avoid overheating, get a can of compressed air and dust out of your computer
    3. Go to the website of the manufacturer of the computer, download and install the latest drivers and BIOS for your model
  • Receiving the message: a clock interrupt has not received on a secondary processor within the allotted time interval. What is the problem?

    My computer goes to blue screen and gives the message above and also said STOP: 0 X 00000101 (0 X 0000000000000031, 0 x 0000000000000000, 0XFFFFF88003163180, 0 X 00000000000000002) of physical memory on the drive of Dumping:

    First says Windows has been shut down to avoid damage.  A clock to interrupt not received on a secondary processor in the allotted time interval.

    Happens if my home screen appears and automatically plays a commercial or video file or if I try to play a video of Facebook, YouTube or my email etc.

    My computer is a Lenovo Z560.  He has done since the day that I brought home from the store.
    I should take that back when I bought first, but did not. I got this computer more than a year.

    Thank you.

    Hello

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error.

    Control bug 0 x 101: CLOCK_WATCHDOG_TIMEOUT-This indicates that an interruption of clock expected on a secondary processor in a multiprocessor system, has not received in the allotted interval.

    http://msdn.Microsoft.com/en-us/library/ff557211%28VS.85%29.aspx

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I suggest you to download the minidump files so that the experts here can analyze the cause of the error on a blue screen.

    Try using this link to download pictures and files on SkyDrive.

    Download pictures and files:

    http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

    Please post back with the State of the question.

  • ReminderFox does not synchronize and then disappeared

    I created Sync to transfer all my data from FireFox on my new computer and it implemented Reminderfox to my new computer, but without any data.
    I guess I hit then sync on the new computer and it seems to have deleted Reminderfox completely on the original computer so now I've lost all my data.
    Any suggestions on recovery, he or she is gone forever?

    Sync synchronizes all the data of Firefox. The modules synchronization radio-box is for synchronization of the addons themselves, not necessarily to synchronize the data of each particular addon. It will not sync data created by and stored by an add-on, when these data are in its "own data files outside the prefs.js file system. It is possible for the data of an add-on to include in the synchronization process, but this feature should be coded in each particular module.

    I don't see any information on how to ReminderFox make use of the functionality of Firefox Sync. It does not resemble ReminderFox has been made compatible with Firefox Sync.

    http://www.ReminderFox.org/documentation-user-guide-sharing-reminders/

    It is quite possible that the Firefox sync service will not process the .ics file type used by the ReminderFox, then the developer would need to make significant changes to this addon for the Firefox Sync service.

  • Can I synchronize and AI on USB-6009 with meter?

    Hi all

    I use USB-6009, LV 8.5 under windows XP. I want to generate signals synchronized with Amnesty International. I know that I can not use the sample as DO clock clock. But can I use the card counter to synchronize and AI? And can someone give some similar examples? Thank you!

    Best wishes

    Bo

    The unit will display whenever you call writing DAQmx. It is more complicated than that. And synchronization is practically based on the flow of data and when you want to generate the digital output from the analog input.

  • Charge of the capacitor, synchronization and dish-sequence struture

    Hello

    First I'll give you some information about my project:

    I'm quite new to Labview, but I have much programmed with C + c++ / C/Assembly. The attached program is a small part of a larger system, but I did a version of it, just to get the hang of it. A capacitor (image) will be charged up to 3, 3V. I'll make two measures 2.5 V and 3.3 V, about 3 tau and 5 charging tau. There are some delays and it is here, I had a few problems.

    Sequence:

    • As soon as the signal must be 0V for at least 300 ms.
    • The capacitor must reach at least 2, 5V in 430 ms from the beginning.
    • Then the capacitor must reach 3.3 V within a maximum of 510 ms from the beginning.

    My attached program is built on a flat sequence structure (statemachine is maybe better?). If I change the 'Wait 300 ms' ms ' wait 80 ", the first time-check will pass.» If I use 300 ms, the first check-time is about 600 ms and the latest ms 950 (it should have been ms 430-300 ms = 130 ms and ms 510).

    I don't want you to do something for me, but maybe give me a hint where to look. A statemachine would do better than the flat sequence? Am I on the right track when checking the time, or is the number of cycles that is useless in this case?

    Is the code in the category Ruby Goldberg?

    Additional info: I am LV 2009 and 2010, but only the versions of Basic. Data acquisition in my program can be replaced by a signalgenerator of 2.5 V and 3.3 V just to test.

    I think that the program does its job, but my timing is not on the right track.

    Thanks for any help.

    Kind regards

    Even

    I'd do the "timing" completely on data acquisition, it is much better than the drunks. You can synchronize the OD and HAVE to have a shared sample clock and a shared start trigger. When you start the task of the AO, the task of I is also running well (you can also do the opposite).

    In the end, you just need to analyze the data of the task to HAVE it. The sampling rate you calculated that are the data points in the table that correspond to your time limits then the array index and check if the voltage is higher than your limit.

    In addition, you have the complete characteristic curve.

    Felix

  • Error in deployment of Simulator for the 10 Blacbkerry 'synchronization and application launch.

    I use Momentics® IDE for BlackBerry Version: 2.0 Build id: v201310251603 with Simulator10.1.0.4828.

    Momentics seems to connect and paired with success to the Simulator. When I click "Run", it starts the process of packaging and deployment, but get the error in "synchronization and launch the application" part. There are different errors but no useful information in the dialog box. Here are two samples

    Failure of deployment: Info: failed to get a connection QConn, sync disabled
    Info: Sync disabled, packaging full bar required for installation
    Info: Sending request: INSTALL_AND_LAUNCH
    Info: Action: install and launch
    News: Native debugging: on
    Info: File size: 304312
    Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
    Info: Treatment 304312 bytes

    #2

    Failure of deployment: Info: try using the synchronization failed: connection reset
    Info: Sync disabled, packaging full bar required for installation
    Info: Sending request: INSTALL_AND_LAUNCH
    Info: Action: install and launch
    News: Native debugging: on
    Info: File size: 304312
    Info: Installing com.example.BB10TrackerSample.testDev_ackerSamplea7864132...
    Info: Treatment 304312 bytes

     

    Please refer to this article for more information about this problem and a workaround.  Note that this problem is resolved in the new versions of BlackBerry 10.

    Application deployment can hang or fail after OTA update to 10.1

Maybe you are looking for

  • 564xl ink

    Why this web site for HP fricken merchandise 564xl black of ink with the other colors?  It does not with the other colors of my printer because it is thicker, he goes to the far right, it is marketed to go with the color cartridges. When I type in th

  • Restart your computer to finish installing important updates keep appearing. Windows Update (Windows 7)

    Previously I installed updates for windows 7, after installing the updates, I restart my computer but it still seems the message to restart your computer to finish installing important updates. Help solve this problem... Original title: Windows Updat

  • Button FileSelectPopup Load said directory history

    This is something new today, and it worked very well last week. FileSelectPopup Load says 'Historic Repertoire' button instead of loading file_sel_return = FileSelectPopup ("", "*.txt", "", "Choose a command Script", VAL_LOAD_BUTTON, 0, 0, 1, 0, file

  • Loader 2.0 fast charging of Smartphones blackBerry on Priv

    Hello world First post here and I thought I would ask to the Priv battery when you use a fast charger. I recently bought an Aukey 3 Ports USB wall charger (model: PA - T2 - QC 2.0) and to present its been great. It loads my Priv fast enough that the

  • 1200 AP configuration question

    I'll put up an AP 1200. If you go to > Network Interfaces > Radio0 - 802.11 g > settings, there is a setting for "external antenna Configuration. I use an external Hi-gain antenna. Can I pay this active? And if so, it won't accept the dbi parameter,