Reference Dell 2700W UPS with the abandoned battery status

Similar Questions

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• The T440p is compatible with the Ultrabay Battery?

  The title issue. I want to know if the T440p is compatible with the ultrabay battery. I don't have any use for the optical drive, and I know that the HARD ultrabay drive caddy is terrible, so I figure that I can use as well make this extra space.

  If this isn't the case, well fine, it's a shame, kind of pointless to have such a notebook thick with such a small battery.

  There is no Bay ultrabay for ThinkPad T440p battery.

• Reference Dell Replay Manager with Actifio or well Veeam?

  I'm not very familiar with SAN storage. The company that I work is currently evaluating a backup solution that will use two Dell Compellents. Currently, we have a HDS, but are considering buying another for a warm site. The citation for the second HDS includes two Dell Replay Manager instances. My understanding is that Dell Replay Manager allows you to take snapshots, which is obviously a good idea. We also assess Actifio and Veeam as backup solutions. Replay of Dell Manager is quite expensive, and I wonder if it's necessary even if we will use Veeam or Actifio for a backup solution.

  Any who would provide no indication as to why or why we would not, want to eliminate the Dell Replay Manager of our purchase IF we proceed to a real (Veeam or Actifio) backup solution?

  Or, it would be better to abandon the Veeam/Actifio and use Dell Replay Manager?

  Thank you!

  You cannot Replay Manager if you go with the Actifio solution.

  Actifio captures the data of the production gradually environment forever and creates virtual copies for multiple use cases (data protection, disaster, recovery testing, etc.).  This architecture combines the quick capture of data from a snapshot of redundancy of a real consistent backup, application.

  Replay Manager uses instant Compellent to enter data, that work very well, but use of space on the storage array, and they do not provide a redundant copy of data.  Also, it presents itself as an additional cost and is another tool, that must be managed.  Actifio solution can provide snapshots, backup and replication through a single user interface services without storing to copy the data on the production storage matrix (copy data virtualization).

  Some of the main benefits of using Actifio in your scenario would be:

  -Copy the data would not be stored on the Compellent production table.  Snapshots of storage array can store the point at best time your production storage capacity.  Design of Actifio is to delete copies of your production sets and eliminate tools point of backup, replication, snapshots, etc.

  -Do you have a truly independent and redundant backup.  Storage array snapshots do not provide protection against the Group failures, breakdowns of the Bay or Bay of storage RAID software problems.

  -Data could be kept for more long with of Actifio built in compression and dedup global

  -Instant access to virtual copies of the data from the system of Actifio

• Apple Watch series 2 comes with the same battery life?

  ddoes Apple Watch series 2 come with the same autonomy and 18 hours without sleep tracker device?

  Hello

  Yes - Apple Watch series 2 offers up to 18 hours of battery life.

  Follow-up sleep was not announced as a new built-in feature.

• Reference Dell poweredge r530 - increase the disk space

  Hello

  We currently have a Dell Server poweredge R530, with installed 5 hot swappable drives with RAID 5 configured. I need to increase disk space for our virtual machines, bought an x 2 extra 1.2 TB SAS drives to install. What is the correct process to add 2 new readers to the table and increase the space available in the 2012 R2 windows server? Could someone sanity check process below please:

  1. install the 2 new drives while the server is powered and operating normally. (What I have to install 1 player and wait a while, or two disks can be installed directly after the other?)

  2. go in dell iDRAC and confirm the visibility of 2 new readers.

  3. wait until the readers successfully have been added to the State through iDRAC Tracker

  4. go in the management of the storage within the 2012 R2 server to allocate new space for the virtual machine partitions.

  Is more correct? It feels like I'm missing an essential step, it cannot be that simple that it allocate the additional storage space on a live production server?

  Any advice appreciated

  Thank you

  1. the two drives can be added at the same time.

  2 iDRAC is not the best way to do it. Unless this is your only access to the server, use OMSA leave within the OS.

  3. the process is not automatic. Once readers show up in a State of PREPARATION, you will need to go to OMSA, PERC, storage, virtual disks and select Reconfigure in the drop-down list of tasks available for RAID 5. (In fact make the statement reconfigures / expansion was the 'crucial step' you left on your list of ;).))

  4. Yes.

  Are your 1.2 to existing disks SAS drives?

• Reference Dell E6540 - where is the Microphone stereo Jack or there one?

  I don't see multiple plug, and the manual refers to the Jack is a multi use.  So, how to record via the socket on the side of the laptop? I get this display when inserting a card.  I do not see any help or refer to stereo microphone.

  

  Another option other than what I mentioned? No, if you need a stereo line. Wiring of the combo as the entry plug is strictly mono, and there is no another entry on the laptop except usb port.

  There are some usb adapters online on this page on Amazon. I'm not saying that any of these products will work for you, but it's a starting point. You must study to ensure that the product you choose is known to work with your operating system.

  DaveK456

  I can't find the instructions for the UI with the seizure of "combo".

  Dell has rarely instructions at all for the use of the audio capabilities of its products. One of my hobbies with her. Another black beast is taking combo, which is a step backwards for laptops IMO.

  By "user interface" do you mean this dialog box in your screenshot? The Jack is an impedance detection mechanism that lets you know when a card has been inserted in the operating system making. However because the plug is versatile, he wants a little more entries from you to know what to set up for. I don't have this dialog box on my laptop with IDT then I guess that it is a function of the Realtek audio driver.

• Reference Dell MD1200, H710 with R720XD

  Hello

  Asked if drieves NL - Seagate SAS (ST4000NM0023) can be used in the following configuration.

  Reference Dell Perc H710 + PowerEdge R720XD MD1200.

  The answer that I gave them was who should be tested. Because in documentation it is stated that mark Dell hard disks should be used.

  I know that some controllers Perc will give a warning each time if not dell disks are used, but they work without problems. Is this the case even when you use a box MD1200?

  Kind regards

  Indrek

  INDRP,

  You're right that only some drives are tested and supported in the bays of the MD. Here is a link that will take you to one of the manuals that list all drives supported for 1200 MD and MD1220.

  FTP.Dell.com/.../PowerVault-md1200_Reference%20Guide_en-US.pdf

  Please let me know if you have other questions I would be happy to help.

• Reference Dell R210 II - update the Firmware on Centos 6

  Hello

  I have several dell servers connecting a mix of OS linux centos 5/6 for windows and xen etc.

  I have run it on every Linux machine to install the dell tools:

  wget - q - O - http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash
  yum install srvadmin-all firmware-tools - y
  yum install $(bootstrap_firmware) y
  srvadmin - services.sh status
  / opt/dell/srvadmin/sbin CD.
  update_firmware - Yes

  on centos 5 is very well and on some centos 6 machines too. However, a new server got us set up this week, the following error occurs, I want to know how to solve this problem, so I can perform upgrades in the usual way via command line:

  Root@server[/opt/Dell/srvadmin/sbin]# update_firmware - Yes

  Inventory of the currently running system.

  Search the directory for storage of the available BIOS updates...
  Checking the BIOS - 2.2.3
  Available: dell_dup_componentid_00159 - 2.2.3
  Did not find a new installation package that meets all the checks of the facility.
  Verification of rev NetXtreme II Gigabit Ethernet 20 (em2) - 7.2.20 BCM5716
  Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Check the system BIOS to PowerEdge R210 II - 2.2.3
  Did not find a new installation package that meets all the checks of the facility.
  Verification of rev NetXtreme II Gigabit Ethernet 20 (em1) - 7.2.20 BCM5716
  Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
  Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8

  Found the firmware that needs to be updated.

  Updates running...
  -Installation of pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_... Package installation failed: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
  -7.4.8.
  aborting update...

  The command to low-level error message was:

  Unable to parse xml output, bad for the package: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
  Root@server[/opt/Dell/srvadmin/sbin]#

  the specification of the server:

  Reference Dell R210 II

  Intel Quad Core 3.2 Ghz
  16 GB of Ram
  CentOS 6.4 x 64
  1 x 256 GB SSD

  ChrisDuk112,

  Could you do me a favor and see if that solves the problem for you.

  the remount mount - o, suid, exec/tmp

  Let me know how it goes.

• After my wife update Dell 755 USSF with the latest updates I am told that my copy of windows is not genuine.

  He spent the real profit in the past and the original software that was installed with the purchase. After 3-4 years microsoft decide to play the stupid guys. Views or suggestions would be welcome. Operating systems Windows XP Pro SP3 and up-to-date with updates irritants.

  Kind regards

  Den.

  Hello there and thanks for your reply. I've sorted it by twisting the system and removing the unwanted annoyance.

• Reference Dell 15R SE replacing the screen (7520)

  I was interested to replace my slab of 1366 x 768 with a panel FHD. Anyone has the number of the original piece of the FHD 7520 screen so I can get that? The LVDS cable currently in my laptop will be also compatible with a higher resolution screen? Thank you

  Screen

  http://www.parts-people.com/index.php?action=item&ID=13441

  No, the power cable does not with a screen high resolution.  Need you a new cable compatible with the higher screen resolution.

  http://www.impactcomputers.com/r4ww7.html

• Reference Dell 6248: hot swapping and upgrade battery links

  I have a set of switches Dell 6248.  I have a few questions to explore:

  (1) can I add/remove the CX4 cables while the switch is working?  (I guess it's the same rules as a cable normal Ethernet...)

  (2) can I add/remove modules while the switch is working?

  First scenario I'm looking at: extend the stack on a stacked rack.

  I think the process here is, install a switch of spare with stacking module, run off battery cables to the battery, breaking and re-Assembly of the ring, then turn on the switch, confirm the ID stack and connectivity and migrate customers to it.  I can totally hot cables plug the CS4, right?

  Next scenario I'm curious: upgrade of 12G to 48G stack.

  Can I exchange the accumulated 12 GB card and swap the 48G card in when the switch is on, or do I have to turn it off?  Connectors on the 48G card the same?  (CX4..)  Can I / layout 48G and 12G cards in a pile during my upgrade?  Is the maximum length of cable the same (3 m) on a stack of 48G?

  Thank you!

  -danny

  Hey Danny,

  The stackable modules are not hot-swappable. The cables are, but for the modules to detect that it must present when the switch is started. A reboot is also required for stacking on these ports using Ethernet. Yes 48 GB stackable modules also have a 3 meter cable.

• HP pro book: 4530 Hp light up not with the inserted battery it lights up when I remove the battery

  Hello

  This morning I tried to switch on my hp probook 4530 s and there is no start, then I pluggged in adapter and still it does not illuminate the LED flashes for some time for 8 seconds and stop, when I turn it on again it does the same thing repeatedly. I removed the battery several times and connects ac, but nothing happened. And now all of a sudden turn on with power supply and no battery plugged in it. Can help me please John this question.

  Clint1

  Hello

  Welcome to the HP Support forum.

  This really looks like a hardware problem. Finally, he could end up by for a service. However, for diagnostics it is very important the number of times the LED flashes / issues.

  Please, check these items official 2 HP on these issues, that you experience now. Follow the appropriate steps that correspond to your case to try to resolve the problem:

  > > http://support.hp.com/us-en/document/c01732674

  > > http://support.hp.com/us-en/document/c03515402

  If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If the computer is still under warranty, you must first notify HP support. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  I would like to know how this happens. Feel free to post again.

• (Redirected) Reference Dell chromebook 11 with Intel i3 chip

  Hello

  I need a new Chromebook low cost asap

  What will be the chromebook dell 11, with an Intel i3 chip, go on sale?

  How it will be in the United Kingdom?

  Why not buy the Acer (also cheap) 720 / 720 p instead?

  Hi redteddead,

  Follow this link for Dell Chromebook to the United Kingdom.

  http://www.Dell.com/UK/Business/p/Chromebook-11/PD?~SRD = true & sk = chromebook & scat = prod