Reference Dell 5130 has 3 light vertical stripes in the print area.

Similar Questions

• Vertical stripes on the side of yellow on Satellite M30

  Im a network administrator, over 30 laptop computers from Toshiba, recently among the satellite M30 appear vertical stripes on the side of yellow whith.

  Is this a problem whith the screen? The main Board? The video card?
  And what migth cause this?

  Thanks in advance.

  Hi Daniel

  You'll be lucky if anyone has an explanation for this. It is just a forum user. Contact the service partner in your country and ask them. They have more experience with hardware problems and I'm sure they can help you.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  If you have specific information on this topic please let us know what the problem is.

  Thank you

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• HP 8600 pro all-in-one: the horizontal stripes on the print out and print to PDF HP 8600

  I'm the horizontal stripes on the printed pages. I cleaned 3 times, each time, the printed test results look good. I even had streaks on the pdf when I chose the print to pdf function. I ran the diagnostics and everything seems fine. I don't get the error messages.

  Not all pages have streaks. But I tried to re - print this document several times and the first page always streaks.

  Hello kerriman,

  Could you go to see how the printer is connected? Is it plugged into a bar supply or directly into a wall outlet? If it is in a power bar could you try plug it straight into the wall.

  If you're still having problems after this attempt following the steps in this document:

  http://support.HP.com/us-en/document/c02866222

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working.  I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC.  The end of the cable does not match any of the places to go on the new PC.  Can you please tell me how to connect the printer to the new PC?   Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.

• Have renewed my subscription ExportPDF, but still pop up with window 'your course has expir├⌐' when will convert via the printer driver window. Comments / help welcome thanks :-)

  Have renewed my subscription ExportPDF, have the confirmation e-mail, but still up pop with window 'your course has expiré' when will convert via the printer driver window. Comments / help welcome thanks :-)

  Hi azza675,

  ExportPDF converts PDF files to Word and Excel formats (and many others). What you describe, sounds like you are trying to convert a file * to * PDF. Have you ever started a trial of Acrobat, maybe? (So that you can create PDFs with Acrobat, ExportPDF don't allow you to convert files to PDF.)

  What happens when you connect directly to ExportPDF to https://cloud.acrobat.com/exportpdf?

  Best,

  Sara

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Tecra 8100: vertical stripes on the screen

  I just bought a second hand Tecra 8100, who has been stripped of all its programs, OS. So I installed Windows98SE on this - now I get a screen with vertical stripes, which perch in the middle of the screen of the laptop with Windows just about visible in the background.

  I went to the display driver Toshiba and downloaded Web pages relevant windows 98se. Once on my laptop, the exe file does nothing; is neither their "graphics card" option in my device manager - everyone has ideas as to what is happening?

  Hello

  Please connect external monitor to your laptop and check if the result is the same. If so, there is probably a problem with the graphics card. If this isn't the case, I presume your laptop LCD screen is defective.

• Tecra M2: vertical stripes on the screen!

  I have a laptop Tecra M2, which (to this day) starts with a display of colorful vertical stripes that gradually change color and width over time - trippy!
  The laptop is password protected, and I can always connect (although can't see what I'm doing).

  So it seems to be a screen rather than a computer problem or a software problem. Any ideas how I can get rid of the scratches?
  Or I am looking to buy a new screen to the laptop?
  See you soon.

  Hello

  Have you tried to connect the external display of notebook o? Not?
  Do it and check if scratches appear on the external monitor.
  If the lines do not appear on the second monitor, the screen of the laptop or one piece is malfunctioning. But it must be a graphics card problem.

  But if scratches appear on the second monitor there must be a card problem.
  However, it seems that it s a hardware problem and you will need to ask a technician for assistance because I put t think you will be able to fix it yourself

• Blue and green vertical stripes on the screen

  Hello!

  My laptop (about 2.5 years lol) overheated and then stop. When I tried to reboot, I get blue and green vertical stripes running through the screen (instead of the part of connection appears) and then the screen turns black.

  It works fine in Safe Mode and when I tried running a Ubuntu Live CD, it starts and the colors were very good and there is no odd scratches. It seems that I only get scratches when I try to start in Windows, in normal mode.

  I hooked another monitor and got the same lines across the screen, so I guess that is not a problem of display... I tried to reinstall the nvidia driver which I redownloaded the Toshiba site, while I was in safe mode, but it still does not.

  Can someone help me, please?

  > I have hooked to another monitor and got the same order of ideas that cross the screen, so I guess that it is not a screen problem
  It is of course graphics card problem and it should be replaced. :(

• large yellow vertical stripes at the start

  At the start of my IMac (OS el Capitan), I got today large yellowish vertical stripes in small blue strips. After that the computer seeks initially to the top once again without my intervention.

  Now it is werking correctly again.

  At anybodt an idea of what's going on?

  Hi phiillip1,

  Thank you for using communities Support from Apple. I'm sorry to hear that you have had this problem with your iMac, but am glad to hear that it seems to work fine for the moment. If this graphic distortion problem returns or happens again, you can find some of the troubleshooting steps described in the following article useful, up to and including contact Apple Support if necessary:

  (Note: article is for external displays, a number of steps should be applied for integrated display as well)

  Get help with graphical problems on the external displays connected to your Mac - Apple Support

  Concerning

• Reference Dell E6540 does not capture sound thanks to the headset

  I have a Turtle Beach Ear Force 50 Recon I bought recently.

  I have connected to my computer (an E6540) with the microphone and plugged everything.

  However, as far as I can tell, it's continuing to capture sound through the laptop itself. This somewhat defeated the purpose the purchase of a headset with a microphone, so if you have ideas, please let me know. And if you need more information, just ask.

  Sorry for the delay. Sounds like a driver problem, so what I would do is to try all the drivers available and see if any of them solves the problem. I would like to start by completely removing the existing driver from Realtek.

  Open Device Manager and expand the sound controllers section. Right click on the Realtek, and select uninstall. Put a checkmark in the option to delete files, click ok. When you restart, Windows either will install its own native driver or a Realtek driver if there was other versions on the hard drive. Then go back to Device Manager and look for a Realtek driver. Keep the uninstall & reboot until Realtek no longer appears under controllers, noise and "High definition Audio Device" appears in its place.

  Then I would try all the Realtek drivers that are available for the E6540 w/Win7, in order of oldest to newest. I hope that all of these links work - this forum has a difficult time to manage the links sometimes.

  http://www.Dell.com/support/home/drivers/DriversDetails?ProductCode=latitude-E6540-laptop&driverId=TFD11

  

  http://www.Dell.com/support/home/drivers/DriversDetails?ProductCode=latitude-E6540-laptop&driverId=Y8V8V

  

  I would do it in this order because you should be able to install a newer driver on a former without first having to remove the old.

  You can also try directly a Realtek driver:

  1. go to the Realtek download selection page. http://www.Realtek.com.tw/downloads/
  2. on the page, click on 'High Definition Audio Codecs.
  3. check "I accept", then "next".
  4. (optional) in the column named "Description" find the file named README and download it. Who has the instructions for the installation or update.
  5. in the column named "Description" select your operating system and if it is 32-bit or 64-bit of 2 choices in the list.
  6. in the column named "Download", click one of the server names to download the driver.

• Reference Dell place 11 Pro 7130, how to activate the quick start Intel?

  Hello.

  I found that the system supports the Intel Quick start feature. The setting is enabled in the BIOS. On the support page of drive you, I downloaded the driver.

  First of all, it can be installed as a separate partition must be prepared for it. MADE with manual quick start by Intel. (By deleting the recovery partition, creation of the fast boot partition).

  The driver has been installed and says in the system Tray 'active '. But it does not work. (After waiting on sleep hours, the battery is empty, but should be turned off to the quick start intel). BIOS is Version A6. Any clue?

  According to another thread (answered by DELL), the function is NOT available on the same public participants11 it is listed in the BIOS.

  Thank you DELL to hear me cry...

• Reference Dell 3100cn impression faded and white bands on the right side

  I have a Dell 3100cn that has about 3 years and I started to experience 2 lines of dots down the right side in each of the CMYK about 1 inch from the right margin.  With some additional impressions, points has continued and the right margin collapsed to some.  When he meets it, I inspected the original drum, which had 13 000 impressions color top and found a pattern of noticeable wear on the roll right where the points emerged, which is also in the middle of the faded area.

  Since then, I've replaced all 4 cartridges (no change) and the drum (this removed the points) and the points are gone, but faded on the right side are always present and sometimes introduce a little yellow toner into a stipe as well.  Any ideas what may be the cause - possibly a roller needs to be replaced?

  Here are some pictures of the problem: http://picasaweb.google.com/kerrylandis/Dell3100cn?feat=directlink

  Any help would be most appreciated.  Thank you!

  Kerry

  Did you clean the stuff off the coast of the new drum unit? There SCRATCHES, left on the drum, after that you do? If so, this drum unit is "toast".

  Once again, excellent photos. Nothing seems to be "demonstrably" false except for one thing... I noticed you are using 3rd party toner carts. In this model of printer, which is bad news. I'm sure they are cheaper, but in the long run, you'll end up paying a lot more to get your machine fixed.

  3 toners (in this printer class) do not have the same OEM toner xerographic properties. In your case, it seems as if the black toner from the black developer is agglutination at the drum, preventing all other colors to make an efficient transfer. You will need to replace all the 4 cpl developer and all 4 carts of toner (with original parts) just to be sure. Not cheap.

  By law, manufacturers of printers are prohibited by the "us clay Act and Sherman Act ' and the 'Canada competition law" and other laws of you ask to use their cartridges. That said, this Bill does not mean that OEMs are responsible for repairs when downgraded 3rd party or products are used in their machines. Also, this Act does not require manufacturers to share their toner formulation... usually a trade secret... with their competitors.

  Some manufacturers use special formulas for their toner. All 3xxx/5xxx series Dell COLOR laser printers fall into this category. IF 'other' toner is used in the machine and the machine is damaged, repair of that circumstance is NOT covered by your warranty. In other words, you will have to pay for the repairs until the machine is fixed, then, the machine is back on warranty. I know from personal experience that Dell has this policy.

  I know your warranty not on now... but it will cost you some $$ if you want to restore this machine perfect condition. More than $$ printer is interesting, but it's your decision. (you might think of parting with the machine on eBay)

  Personally, I no longer buy third party carts... NONE of the 3rd party resellers ask if they will guarantee repair of the printer costs if their product causes damage. If they say yes, ask in writing.

  Sorry I don't have better news for you.