Reference Dell 5550 GSM and Latitude E6410

Similar Questions

• Reference Dell 1700 crashed and I have no backup

  Reference Dell 1700 crashed without backup whats a girl to do
  
  

  lost all programs can run does not help

  Reference Dell 1700 crashed without backup whats a girl to do

  
  

  lost all programs can run does not help

  Reinstall Wndows.

  Reinstall all your programs from the original media or downloaded files you have saved on an external drive.

  Reinstall all your data from the backups that you made on an external drive.

  If you have not, you're out of luck.

• Reference Dell Webcam Central and Windows XP (also Windows 7)

  For all the frustrated Dell customers out there who bought Dell computers delivered with Dell Webcam Central, only to have the application stops working with the built-in webcam ("Please plug in a supported webcam"), here is the link to a recent version of the Dell Webcam Central application:

  It is version 1.40.05.  This is the full installation, not an upgrade and includes the "Live!" Cam Avatar Creator software.  I have installed this package on my Inspiron 1012 running Windows XP Home Edition, and it works perfectly.  It is also the same version that shipped with my Studio 1558 running under Windows 7 64-bit.

  I'm not absolutely sure, but I think that the problem is caused when Windows Automatic Updates installs a new integrated version of the webcam driver (this is a Microsoft driver).  The old version of Webcam Central (such as 1.06 or earlier version) does not recognize the updated driver level.

  Don't bother download the 'DellWebcamSW' that Support Dell continues to try to direct me to via "tinyurl.com" (http://ftp.us.dell.com/app/DellWebcamSW.exe) - it is a version older that that delivered with my Inspiron 1012 and therefore will not even install.

  Dell really needs to pull together their support, at least when it comes to software.  They had download me Dell Webcam Central (at least three or four times), they sent me a CD to install the Dell Webcam Central, they even sent me a new hard drive previously imaged.  Downloads and CD always contains the same version that came bundled with my 1012, or even older, even though I told them I needed a newer version, and the new hard drive do not even have the application installed (I sent the new rear drive and kept my old drive).

  And don't bother looking on the site drivers and downloads (whether through the service tag or computer model).  He is not here, for my Inspiron 1012 or my Studio 1558, or for any other model of computer, I looked.  (The Inspiron 1012 list includes even not all the same drivers that requires my computer.)

  Zamolxe,

  The new link for Dell Webcam Central

  Rick

• Reference Dell 968w AIO and Windows 8

  My dell 968w AIO will not print I've tried the drivers downloeading and it says there is not supported the printer appears in the folder because there is no "host usb controller" in the bottom list. It's a new laptop and a new system but old printer how to communicate?

  Hi melrose15,

  The 968W AIO printer is not compatible with windows OS 8.

  Please click here to check the compatibility of printers: http://dell.to/170M3BP

  However, try to install 64-bit of Windows 7 in compatibility mode on Windows 8 computer drivers by following the listed below as follows:

  Click on this link: http://dell.to/155CQMe

  Click on the downloaded file, and then save the file to the desktop. right click the drivers file, left click on properties and compatibility of the left click. Change the compatibility based on the drivers / software you are trying to install (if the drivers/software is Windows 7 64 bit, then try using 8 64-bit Windows). Then right-click on the drivers, on the left, click Run as administrator.

  Note: Do NOT check the box run this program as an administrator and do not connect the printer to the computer before installing the drivers.

  Please post the results.

• Reference Dell W2600 (dvi) and Toshiba A3 HD DVD

  Question - when I connect to the HDMI to DVI (tv) (dvd player) the only colors I get arered and green (correct the HDMI/DVI cable). When it is connected to the component part of the TV picture is fine. So, what with the DVI on the TV?

  
  

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd

• Activate product key Dell latitude E6410

  OK, I have a Dell Latitude e6410 when I got it, it came with the hard drive has failed I replace the hard drive and a friend of mine who fixed it for put me Windows 7 Professional on there but any way or another I messed up windows if bad, it would not start again Windows, Enterprise Edition and I couldn't not started so I bought a key USB from Amazon It is by a company called fixed-to-fixed and it has Windows 7 Professional on this topic so I loaded that and put it in the product key provided with the Dell printer. Then I have to pay for the turn, or what I have to go back and get Windows enterprise?

  I tried to activate it by calling the toll-free number, but the supplied keyboard was not a zero on this issue. Only 1-9.

  Dell is a VAR (Value Added Reseller), was this laptop originally intended to be sold to a company? His possible destination was a large company that bought computers and Dell configure them previously with Windows Enterprise volume license customer.

  In order to have business installed however, the machine must be licensed with Windows Professional, since the company is an upgrade under the terms of a volume license.

  If the sticker of COA said Windows Professional OA, then you have the right to ask the recovery media and reinstall the edition appropriate for the machine.

  Reference Dell
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen
  1-800-624-9896

• Reference Dell place 8 just out of warranty and dead now?

  Hello

  Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.

  I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14

  What a *.

  Reference Dell of mobile devices (phones) & tablets
  1-800-308-3355 24 / 7

  http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Reference Dell 6224 and 5448

  Hi team,

  I'm new dell switches - exposed to cisco switches. I am faced with new kinds of problems with these dell switches. Unable to provide a fix and fight for the last 5 days. Pls help me. Below is my script

  Two nw - 2.0 and 3.0 is required to be configured in VLAN, VLAN ID 2 and 3.

  VLAN 2 - 192.168.2.1

  VLAN 3 - 192.168.3.1

  N/W 2.0 and 3.0 N/W machinery will be shared 48-Port powerconnect switch 5448 DELL

  The routing part arrives at 6224 power connect - gateway for vlan 2 - 192.168.2.1 and bridge for VLANs 3 - 192.168.3.1

  The switch of two is ascending through fiber optic - spf port cable

  This is the configuration I did-

  5448 switch-

  database of VLAN

  VLAN 2, 3

  output

  interface vlan 2

  switchport access vlan 2

  GVRP enable

  Routing

  output

  interface vlan 3

  switchport access vlan 3

  GVRP enable

  Routing

  output

  interface ethernet 1/you/1

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  output

  interface ethernet 1/g1

  switchport access vlan 2

  GVRP enable

  output

  interface ethernet 1/g2

  switchport access vlan 3

  GVRP enable

  output

  Uplink port is TE1 (Layer 2) to XG2 (Layer 3)

  Reference Dell 6224 can connect

  Configure the terminal

  interface vlan 2

  no downtime

  IP 192.168.2.1 255.255.255.0

  Routing

  output

  interface vlan 3

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  Routing

  output

  interface ethernet 1/xg2

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  Computer with 192.168.2.100 / 24 GW 192.168.2.1 connected to layer 2 switch g1 - vlan 2

  When I ping 192.168.2.1 - accessible United Nations host destination

  Even the wise

  Computer with 192.168.3.100 / 24 GW 192.168.3.1 connected to layer 2 switch g1 - vlan 3

  When I ping 192.168.3.1 - accessible United Nations host destination

  Any thing that has missed out in the configuration part / all bad entries. I'm not sure now how to treat this. Pls help me and it is an urgent task for me

  Thank you

  With multiple VLANs, you need to use the general/Trunk mode. With the help of the info we have I made a diagram to help show the location of the switches and parameters on them. Obviously things can be different, such as PVID, IP address, VLAN ID etc are all customizable to your needs. But the page layout modes and the port will remain the same.

  

  STP will not fill the VLAN on the other switches. It's probably the GVRP feature it refers. With such a short race, it is more practical to manually add the VLAN. At least for the initial Setup, then once everything works enable GVRP to accommodate future expansion of VLAN.

  Hope this helps some.

• Reference Dell studio 1536 gacé graphic / help__i have a computer laptop dell studio and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  Ideas:

  • I have a dell studio laptop and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  There SR 780 chip and also I could not find any housing emty external or internal to a 3D support
  Help, please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi waheedkhan

  Welcome to the Microsoft Answers Forum!

  To install additional video card for laptop is not possible as desktop, as the video card is integrated with the motherboard. However you can contact Dell technical support if they can provide an additional location for add video card. Here is the link to the support technology guide below: http://support.dell.com

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell backup and restore is unable to create a DVD of recovery on Windows 8

  Dear Dell,

  I am creating recovery discs "Dell backup and Recovery application" but when I was asked to insert the second DVD, the optical drive keeps rejecting DVD. The application will not continue to burn the second DVD and seems to be frozen. I tyied with different DVD brands/manufacturers and also-/ + r unfortunately. The question remains. I could find this 593906 article published 21-01 - 2013 (http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=19&docid=593906&doclang=en&l=en&s=dhs link). Although I did the updates, I'm still not able to create recovery discs!   File: after having inserted the Disc 3 application gives the message "Dbr.exe-" not found disk and stays there and rejects the DVD.  I spoke with the Greek team of Dell. I was told that warranty does not cover the support of sw even if my unit is less than a week. Furthermore, I learned that although "Dell backup and restore" application said THAT DELL is not actually a Dell product so they can't support. They my proposed to use the recovery of files from windows 7 place (which needs at least 8 DVD!). As you can understand it's a workaround and not a Solution.

  I hope that someone from Dell will consider the issue and to come back with a precise answer and a permanent solution.   (Model: inspiron 15 3521). Thank you

  Hi ylikonomos,

  You can try to uninstall and reinstall Dell Backup and Recovery Manager and Dell Support Center. Follow these steps:

  • Press the Windows key + 'X' on the keyboard.
  • Select "Programs and features" in the context menu that appears in the lower left corner.

  

  • In the list of applications, uninstall Dell Backup and Recovery Manager and Dell Support Center.

  Below, check the version of the BIOS installed on the laptop. Press Windows + "R" key, type msinfo32 and press ENTER.

  

  

  Identify the version of the BIOS. If A04, the update of the BIOS is not necessary. If this isn't the case, update the BIOS. Before flashing the BIOS please check this following:
  * No external device (printer, USB stick, SD card, DVD) must be connected.
  * All other programs should be closed and saved documents.
  * The power adapter and the battery must be connected during this process. The battery must be 10% or more than 10% of charge.

  Here is the link for the update to the BIOS: http://dell.to/VBwSAh. The laptop restarts after this update.

  Visit this link: http://dell.to/VBz1fr and click Dell Support Center. Download and install the application.
  Once done, visit this link: http://bit.ly/UUjIs0 and install Dell Backup and Recovery Manager. Restart the computer and check if you are able to create the recovery media.

  Please, try the following steps and share status.

• Reference Dell backup and restore =?

  This software was preinstalled on my newly purchased Dell Inspiron 3646... can't make heads tails ov er it.

  

  Hi John Sellers,.

  Applying Dell backup and recovery seems to be corrupted. I advise you to reinstall the Dell backup application and system restore using the link below and check if you are able to restore the system.

  http://Dell.to/19QaFSu

  Please let me know if it helps.

• Reference Dell powerconnect 5524 cannot ping between coelio and trunk port

  Hello...

  We set up a new switch of 5524 I untagged on vlan 20 and access ports where vlan 20 I allowed. I created a computer on the access port on the same trunk port ip net... cant ping beween them. I'm no expert of switch, so I wonder what I missed. I did the same thing on a dell old 3524 and it works directly...

  Here's the port config I tried to do a ping beween is 6 and 10 ports

  (Another thing, how how to remove):

  switchport mode trunk
  switchport access vlan none)

  Any help would be greatly appreciated!

  interface vlan 1
  IP 88.131.90.252 255.255.255.240
  !
  interface vlan 5
  the name 'SCE CJA'
  !
  interface vlan 6
  the name "out of Tele2.
  !
  interface vlan 7
  name "Outside Telenor"
  !
  interface vlan 8
  name "TDC Multivrf"
  !
  interface vlan 20
  TDC-CISCO-LAN name
  !
  [0mMore: , quit: q or CTRL + Z, one line: interface vlan 21]
  the name "FW inside."
  !
  interface vlan 99
  name «FW sync»
  !
  gigabitethernet1/0/1 interface
  Description CPE1
  switchport access vlan 5
  !
  interface gigabitethernet1/0/2
  Description CPE2
  switchport access vlan 5
  !
  interface gigabitethernet1/0/3
  Df description
  spanning tree portfast
  switchport mode trunk
  switchport access vlan no
  !
  interface gigabitethernet1/0/4
  Description Oupps-cb2
  [0mMore: , quit: q or CTRL + Z, a single line: spanning tree portfast]
  switchport mode trunk
  switchport access vlan no
  !
  interface gigabitethernet1/0/5
  Upp-ccm1 description
  spanning tree portfast
  switchport access vlan 20
  !
  interface gigabitethernet1/0/6
  Oupps-ccm2 description
  spanning tree portfast
  switchport access vlan 20
  !
  interface gigabitethernet1/0/7
  Tdc-multivrf1 description
  switchport access vlan 8
  !
  interface gigabitethernet1/0/8
  TDC-multivrf2 description
  switchport access vlan 8
  !
  [0mMore: , quit: q or CTRL + Z, one line: interface gigabitethernet1/0/9]
  Description Oupps-cb-tq03
  spanning tree portfast
  switchport mode trunk
  !
  interface gigabitethernet1/0/10
  Description Oupps-cb-tq04
  spanning tree portfast
  switchport mode trunk
  !
  interface gigabitethernet1/0/11
  Tele2-outside description
  switchport access vlan 6
  !
  interface gigabitethernet1/0/12
  Tele2-outside description
  switchport access vlan 6
  !
  interface gigabitethernet1/0/13
  Telenor-outside description
  switchport access vlan 7
  !
  [0mMore: , quit: q or CTRL + Z, one line: interface gigabitethernet1/0/14]
  Telenor-outside description
  switchport access vlan 7
  !
  interface gigabitethernet1/0/15
  Description Word-Oupps-fw-tq01-inside
  switchport mode trunk
  !
  interface gigabitethernet1/0/16
  Description Word-Oupps-fw-tq02-inside
  switchport mode trunk
  !
  interface gigabitethernet1/0/17
  FW-sync description
  switchport access vlan 99
  !
  interface gigabitethernet1/0/18
  FW-sync description
  switchport access vlan 99
  !
  interface gigabitethernet1/0/19
  Description Word-Oupps-fw-tq01-outside
  [0mMore: , quit: q or CTRL + Z, a single line: switchport mode trunk]
  !
  interface gigabitethernet1/0/20
  Description Word-Oupps-fw-tq02-outside
  switchport mode trunk
  !
  interface gigabitethernet1/0/22
  FW-Sync description
  switchport access vlan 99
  !
  interface gigabitethernet1/0/23
  Description Word-Oupps-FW-tq01-outside
  192.168.11.1 IP address 255.255.255.0
  switchport mode trunk
  !
  interface gigabitethernet1/0/24
  Description Word-AIN-LAN-SW
  switchport access vlan 20
  !
  IP route 0.0.0.0 0.0.0.0 88.131.90.241

  [0mMore: , quit: q or CTRL + Z, a single line:]

  Information of VLAN

  The name of the VLAN Tag Ports Ports unmarked Type permission
  ---- ------------ ------------------ ------------------ --------- -------------
  1 1 article gi1/0/3-4, default required
  Article gi1/0/9-10
  item in gi1/0/15-16,
  item in gi1/0/19-21,
  item in gi1/0/23,
  item in gi1/0/25-48,
  TE1/0/1-2.
  GI2/0/1-48.
  TE2/0/1-2.
  IG3/0/1-48.
  TE3/0/1-2.
  IG4/0/1-48.
  TE4/0/1-2.
  IG5/0/1-48.
  TE5/0/1-2.
  GI6/0/1-48.
  TE6/0/1-2.
  gi7/0/1-48.
  TE7/0/1-2.
  gi8/0/1-48.
  TE8/0/1-2, m 1-32
  5 CPE TDC article gi1/0/3-4, item in gi1/0/1-2 permanent required
  [0mMore: , quit: q or CTRL + Z, one line: article gi1/0/9-10]
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  6 outside section gi1/0/3-4, item in gi1/0/11-12 permanent required
  Tele2 item in gi1/0/9-10,
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  7 outside article gi1/0/3-4, item in gi1/0/13-14 required permanent
  Telenor item in gi1/0/9-10,
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  8 TDC Multivrf item in gi1/0/3-4, item in gi1/0/7-8 permanent required
  Article gi1/0/9-10
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  TDC-CISCO-LA 20, article gi1/0/3-4, item in gi1/0/5-6, item in gi1/0/24 required permanent
  N item in gi1/0/9-10,
  item in gi1/0/15-16,
  [0mMore: , quit: q or CTRL + Z, one line: item in gi1/0/19-20,]
  item in gi1/0/23

  In safe mode the PVID is 1 VLAN by default. You can do this by entering the command #switchport trunk vlan native {number of vlan}. If Cisco is configured to accept and send the marked packets and has an IP address in the subnet of VLAN 20, it should be able to communicate with other devices in VLAN 20.

• Reference Dell MD3000i and vSphere 5.5

  Actually I'm on vSphere 5.1. Running two servers of 5.1 on Dell R805 ESX and storage on a Dell MD3000i.

  Did anyone out there running vSphere 5.5 in combination with a Dell MD3000i SAN?

  Since the MD3000i is also not compatible with version 5.1 that I use.

  We run from separate md3000i 2 with of Dell R710.  I ran on vsphere 5.0, 5.1 and 5.5.
  The current host of 5.5 runs DR Veeam, so it has e/s of Veeam jobs but hosts only 2 running virtual machines.
  We spend 2 hosts of production 5.5 soon, do not anticipate any problems.

  Be sure to have the new firmware on the md3000i itself - the update of the firmware, I'm pretty sure that is very important for compatibility above 4.5.

  Rumors that I've heard of compatibility have been on failover - I still need to test the failover using network cables and forcing a failover to ensure that vmware panic.