Reference Dell 946 AIO windows 7 64 bit, after installing AIOC.exe has stopped working

Similar Questions

• Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

  I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

  bredenbm,

  We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

  First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers.

  All other drivers

  Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

  In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• kdbsync.exe has stopped working - win 7 64 bit

  I am running Win 7 64 bit on an HP Pafilion HPE h8 - 1360t.  After last week round of updates my computer can't play mp4 files, the Media Center will come is no longer (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the Web of magic HP also would not come to the top, and the mysterious "kdbsync.exe has stopped working" message when I reboot.

  After hours of reading the forums, I found that it seems to be related to the AMD graphics card update.  My computer has an AMD Radeon HD card 7570.

  On the AMD website it is listed as a legacy for XP computers adapter.  I don't know why HP installed in a computer running Windows 7 64 bit with an Intel Core I7 CPU.  It does give me confidence in HP equipment.

  The AMD utility correctly detected my card and told me that I needed a driver called:

  14-4-Win7-WIN8.1-64-DD-CCC-WHQL.exe

  But when I clicked the Down load button, I received the message, "could not conntect to the server.  Could not parse error. »

  I have not found such a driver on your Web site.

  How can I get my Media Center works again?

  The idea of turning off all non-Microsoft services, scares me to death that I now have my computer how I want it.

  I've also posted on the forums of AMD that I concluded that their Board of Directors has been offending material element:

  http://forums.AMD.com/game/messageview.cfm?CATID=454&ThreadId=173935&forumid=11 you can read my response to the agent who helped me.

  Basically, I had to uninstall all the drivers AMD and sotware using functions of control panel of configuration/programs & and then run the clean uninstall AMD program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx

  Then install the drivers from here:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64#AMD-catalyst-packages

  I do not recommend installing this set of drivers unless you are SURE that they are correct for your hardware.  I could not use steps 1-5 on the AMD site because the last necessary step you choose the operating system that your equipment is running.  The HP installed in my computer 'last and best' video card a year ago was so old that the operating system that is only offered to step 5 have been XP and Vista!  Be aware that HP uses inherited in its latest PC hardware.

• Adobe AIR 19.0.0.193 - Windows 7 - crash App - MyApp.exe has stopped working

  My app crashed and think it's something with the latest AIR beta.

  App has receiver eception of errors, but there is no pop up. Only "myApp.exe has stopped working" Windows dialog box.

  App has been normal work for a long time, so I doubt that the bug is in my application, but it could be.

  Accident was under Windows 7 64-bit, 4 GB RAM

  Here are the details of the error:

  Name of the failing application: MyApp.exe, version: 0.0.0.0, time stamp: 0x4eb75ae0

  Name of the failed module: Adobe AIR.dll, version: 19.0.0.193, time stamp: 0x55f764b7

  Exception code: 0xc0000005

  Offset: 0x00153c5d

  ID of the process failed: 0xd34

  Start time of application vulnerabilities: 0x01d1044a1a2a7134

  The failing application path: C:\Program Files (x 86)------MyApp------MyApp.exe

  Path of the failing module: c:\Program Files (x 86) \Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll

  It was a bug in my application. Still wonder why he did not uncaught error events...

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• Windows Vista. Setup.exe has stopped working and I can't get the program to load.

  I have a Gateway laptop with Windows Vista.  I put Norton anti-virus on it last year.  Now I am trying to run the new disk of Norton and the computer tells me that setup.exe has stopped working and I can't run the program. Norton 2008 has been removed.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download/run their abovelink Norton Uninstall tool to ensure that all "Norton" is deleted.

  Then, right-click on the setup.exe Norton > run as admin.

  If the above does not help:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  Contact the Norton Support for problems with their software.

  See you soon. Mick Murphy - Microsoft partner

• 34957172.exe has stopped working and was closed. Windows error message

  Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

  Hi SherriTeille,

  (1) what is you receive the exact error message?

  (2) when exactly you get the error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• Windows 7 error: "5487992.exe has stopped working".

  I have a Windows 7 machine and I started getting the following message: "5487992.exe has stopped working". The computer will function normally after you close the error for about 5 minutes, how the machine gets to the login screen. If I log in as usual I receive the same error message and return to the display of connection in 5 minutes again.

  I searched this error message and don't have wonder no results found. Any help would be greatly appreciated.

  Thank you

  Mike

  Hi Mike,.

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. It happens when you navigate to a specific application? If so, name the application you initiate.

  The causes of .exe error messages can vary considerably. However, most of the .exe errors result from a corrupted or damaged file ntdll.dll version itself, corrupt hardware drivers, or issues between Windows and other programs.

  I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem exists, try the next method.

  Method 2:

  I suggest you to perform a file system (CFS) Checker scan to check the alteration of system files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows 7 HPSF.exe has stopped working on my Compaq laptop

  I have a Compaq Presario CQ 57 Notebook PC and after a few updates have been installed, yesterday I got a message that my HPSF.exe has stopped working.  I tried to download one, after I removed the program and restarted but it did not work, perhaps because I do not have windows 8 or my provider Internet could slow down.  Could someone help?  I just bought this computer about 7 months ago.  This will damage my computer by not only not this program now? Thank you

  Hello

  There is certainly no problem with your laptop computer without this application installed - personally, I've never used this application (other than for testing).

  If you do not want ot reinstall the application, I suggest to install Firefox and use this browser to download and install the latest version of HPSA.

  Best regards

  DP - K

• How to solve the questviewer.exe has stopped working windows 7

  How to solve the questviewer.exe has stopped working windows 7

  using the analysis

  http://www.Malwarebytes.org/

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Also look for viruses either using avast and spyware using superantispyware

  go to msconfig (type in the search box in startmenu or run in xp, and then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If it did then you know who caused the problem.

  you will also need to know is that "questviewer.exe"? It belongs to a program? If the answer is Yes try to update or reinstall the program, but before that make sure that the program is not hamful to your pc.

• "messagecheck.exe has stopped working" message any time when I started my windows 7

  Following is the display window:

  ----------------------------------------------------------------------------------------------------------
  MessageCheck.exe has stopped working
  Windows can check online for a solution to the problem.
  --> Online and are looking for a solution and close the program
  -->, Close the program
  ----------------------------------------------------------------------------------------------------------
  I did the two one after another, still no help to stop it. He is always arise every time when I start Windows 7 and continues to POP up at any time when I use Windows 7. Looking for a solution to stop it.

  Hi abdou,.

  Is your machine a HP?

  If so, please take a look at the link below with a possible solution:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software/MessageCheck-exe-after-uninstalling-HP-PhotoCreations/TD-p/1496147

  I hope this helps!

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• Windows host process (RunDLL32.exe) has stopped working

  Everytime I open my folder images IT WILL SHUT DOWN AFTER a FEW SECONDS or A minute SAYING THAT MY PROCESS HOST WINDOWS RundII32 has stopped working. And there are no long enough for me to know which file is bad other than these details.

  Application name: RunDLL32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: StackHash_b15c

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception offset: 00000000

  OS version: 6.0.6000.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: b15c

  More information 2: c9e4594304342b09253c479543bc2fd3

  3 more information: da4d

  Additional information 4: ac61abc0799c254a2f5de7b99577dca9

  Hello Billsherenow,

  You can try this download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html? tag = mncol install, Update then do a scan of your system to ensure that it is indeed clean.

  Once the scan with the System File Checker, follow these steps:

  1. Click Startand type cmd in the box start the search .
  2. In the results, right-click on cmd.exearea, and then click run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click continue . Then, click continue.
  3. At the command prompt, type Sfc/scannow, and then press ENTER.

     The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Windows Media Center... Media Center has stopped working... Close the program

  Media Center comes on monitor... I select Live TV... Broadcast starts and 5 seconds later... photo will gray out and window "Media Center has stopped working" is displayed.  Part audio will continue to broadcast.

  Sometimes of Media Center... Live TV will work without this message.  Tried a few bugs from Microsoft's web site without success.

  Help..! Thank you...

  Hi herbyderbydo,

  1A what difficulties have you tried Microsoft?

  2. does come with any specific channel?

  This problem occurs if the process of updating Windows Media Center (Mcupdate.exe) cannot access the Windows Media Center data store.

  You'll need to rebuild the Windows media center data store and check if it works.

  Run the tool fixit here automatically to rebuild the data store.

  You can also try manually as follows:

  1.	Exit any running instance of Windows Media Center.
  2.	Delete the file mediaCenterDataStore.db. By default, this file is located in the following location: %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB To remove the file, follow these steps: one. Click Startand then click run b. In the Open box, type run , and then click OK If you are prompted for an administrator password or for confirmation, type the password, or click continue c. In the Open box, type %systemdrive%\programdata\microsoft\ehome , and then click OK . d. In the details pane, right-click right mediacenterdatastore.db and then click Remove . e. Click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
  3.	Start Windows Media Center. If the previous step fails, check the event viewer to determine the cause of the problem and post here What are the information in event logs? (Event Viewer) http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer Let us plug in which is also used by the channel causing the media center stopped by right clicking on the channel.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.