Reference Dell coming 8 Pro 64 GB Wireless does not start after the latest updates including 8.1 update 1

Similar Questions

• Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite

  After you download the last updated September 27, lightroom does not start on my mac.

  Used to work without problems so far.

  Tried to disconnect the last clouds and again without success.

  Thanks, that worked.

  Now, I have to do the update again hope that will work as well...

  Do you have any idea what caused the problem?

  Concerning

  Christian

  MIT thank wurde

  Hans Christian Behrendt

  2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:

  Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates

  by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop

  Lightroom *-see complete discussion

  https://forums.Adobe.com/message/8015642#8015642>

• Reference Dell E6540 - ATI Radeon HD 8790 M does not appear in the BIOS

  Hello

  I have a Dell E6540, which, according to the data sheet must have a graphics card than ATI Radeon HD 8790 M. but looking in the BIOS, there is no entry in addition to the dedicated graphics card Intel 4600.

  I have the latest version of the BIOS and the latest graphics card driver. I am using 8.1 Windows 64 bit.

  Please let me know if I need to do something else to make it the primary video controller.

  Also, is it possible to see if the graphics card is "there"? I think that if it does not show in the BIOS menu, either is missing or broken.

  Any help is appreciated.

  Thank you
  Teo

  There are two ways to create a mobile video hybrid:

  1 hardware control - with a multiplexer equipment

  2 control software, where only the GPU from Intel is hard wired to the display and the secondary GPU is used as a coprocessor.

  Your system is of type 2.  It is not a true independent GPU - this is a coprocessor for the Intel's GPU, fully controlled by software and drivers.  To use the AMD GPU, choose using the Catalyst Control Center under Windows.

  The AMD GPU can never primary rendering on this system: it's a secondary GPU by design.

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• My hard drive crashed and I need to reinstall XP PRO but my computer does not start on the CD

  I went into the BIOS and changed to start from the windows xp pro disk but no matter if I put in the pro or the original disk, I get 'disk read error.  CTRL Alt Del to restart.  BIOS can see how much space is left on the hard drive, so it's there, and BIOS knows I want to boot from the installation disc, but it doesn't.  What I am doing wrong?

  Hi Jade4142.Did try you go to BIOS and set it to the default settings and put the disc in, and then restart. There are many variables to a disc is loading. It could be the Platinum cd/dvd is defective, the disc is dirty, scratched or any black disc market. It you load on the HARD drive that crashed? If so, it could be that the HARD drive is infected? If this is a new HARD disk, you must leave the disconnected HARD drive, start the computer that lights up and looking for a hard drive. In this way the motherboard works independent of the HARD drive. The motherboard doesn't have a HARD drive to boot. Once you start without a HARD disk he won't say you no HARD drive or o/s found. Stop it. Connect the HARD drive for the sake of things a NEW HARD drive. Then start the unit go to BIOS and set to boot from the cd/dvd and then save and reboot. If the disc is genuine, and it's a new HARD drive, it should load without problems. He must ensure that the cd/dvd is above the machine to choose this path.click top and press the sign on your keyboard + and you'll see it move to the top of the list. If she is not at the top is not first in line to start. Just trying to help.

• 8 place of Dell does not start after the update failed

  I had started my new Dell place 8 (with Android 4.2) for the first time, and it works pretty well. I was about to install some applications when I noticed "System update," tap to install. I did and it downloaded, rebooted and started to install with nothing do not appear to be wrong. I waited patiently to settle, and all at the end of the installation, he stopped and displays an error message - which amounted to a bot Android in a pose 'broke, closed, stwaming' and the message 'error '.

  And it has been frozen.

  I held down the power button to turn off and then repressed it see the logo of dell for a fraction of a second, and then a USB symbol for a fraction of a second, then it stops. This happens whenever I start.

  I tried to use Droidboot to reset the installation. I can get this to work, but after that I selected recovery it restarts and after the Dell logo gives me the error message 'pic of the Android dead' with the message "No command." This is an another freeze screen, I can't go further without having to reboot.

  What I want is this thing start, I don't like what version of Android, it runs at that time. Assistance to get the thing to start would be greatly appreciated. I won told the thing in a contest, I don't want to be the proud recipient of a brick.

  In this regard, it turns out that you don't have any loose! I discovered this by risking that it and it worked! I didn't not lose something unique on my tablet.

  Step 1 power off.

  Step 2: Press and hold the Power + flight to access Droidboot.

  Step 3: Choose Reboot or recovery (I chose the recovery! "I would say that recovery is the best option!)

  Step 4: When greeted by Dead Android, room hold press flight - up twice and a mini menu appears.

  Step 5: Select Restart now. In a few minutes, your device needs to be restored and booted up ready to go! Enjoy your Tablet without worry!

• Windows does not start after the start menu after installing own home premium 7 on the Dell Inspiron Duo

  I did a clean install of windows 7 Home premium 64 on my dell inspiron duo 1090, returning 8.  This laptop does not have a disk drive or an Ethernet port.  I used Installer 64 bit of this Web site and the corresponding link.  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/can-i-revert-back-to-Windows-7-from-Windows-8/f8f5aaaa-8a18-4255-a6b2-5ecd6840d7ab

  It installed perfectly fine at first.  I was unaware of the proper order of pilot facilities and went first on the network drivers.  Designed for cordless operation and then use the updates automatic/driver finder.   After going on the dell site and download the drivers of network to a flashdrive from another computer, I then unpacked and used the setup.exe.  Now, when you try to restart the computer it perpetually loop screen Dell, the only options in F2 for Setup or F12 for boot options (the only option being the hard drive boot because there is no disk drive physical and nothing mounted on a virtual disk drive).

  Any help is appreciated and ask all the details that I left out.

  Thank you-

  I intend to use this laptop for school and Windows 7 is required for course work.

  Perform the following steps:

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the DVD of Windows 7 disc or a USB flash drive that you created, and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates to max at a time) of the updates at a time,
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell XPS 8500 does not start after the interruption of system restore

  It was one thing to do, but I turned off my PC during the restoration of the system because he took time to complete the process.  The next day I couldn't boot into windows.  I tried the automatic repair feature, but it does not work.  I tried to repair windows using the orignal installation disk, but it does not work.  I tried to install Windows 8 all over again, but I got an error message - media pilot is missing.  I opened the box uninstall the RAM, videocard unplugged and both drives and reinstall, but without success.  I noticed that there is an orange/orange light on the motherboard.  I thought it was the hard drive at the beginning, but now I hope that this is not the motherboard.  Any help will be appreciated.

  RB

  You have damaged the image beyond repair.  You need to reinstall from scratch.  Windows to say that an optical drive driver is missing, bad copy of DVD-RW, DVD + R or DVD - R media that was not burned at 1 X 2 X or 4 X, so is not readable.  This is why USB Flash Drive 16 GB or more is recommended rather than the DVD player to the installation media.

  Why doesn't my CD or DVD drive?

  Troubleshoot installation of Windows 7 Service Pack 1

  A required CD/DVD drive device driver is missing
  A media computer driver needs is missing
  error message when you install Windows

  https://support.Microsoft.com/en-us/KB/2755139

  This problem occurs for the following reasons:

  The installation DVD is removed during the installation process.
  A bad quality DVD has been used to create the installation DVD.
  The speed at which the installation DVD is burnt was too fast.
  The DVD drive cannot read media.
  The ISO file is corrupted.

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• I have re-installed Windows Vista on my laptop (Dell Inspiron 1525) and now my wireless does not work.

  Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .

  original title: Wireless problems after install.

  I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help

  Question...  You have whatever it is listed in the "Network adapters" section of "Device Manager" now?

  While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.

  You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included.  This could be a hardware problem PURE.

• I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

  I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

  Hello

  Have you changed the boot order?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  See you soon.

• Serial number does not work after the transfer of OSX and apps for the new Macbook Pro

  My serial number does not work after the transfer of applications and OS X for my new Mac.  Although the Adobe specifications say it is compatible with the older OS X, it does not seem to have no compatibility issues because

  -My old Macbook Pro has Yosemite and was fully running CS5 Web premium without a problem.

  -My new computer has the same * exact * OS X transferred in which the suite was fully functional with the trial.

  A support of top-level, software engineer, or someone who takes care of the soap operas could

  -Please provide a number of test series to test with?

  - And/or activate my series?

  - Or show how to disable the publication series on the old disk hard if I can't use the old computer?  So that I can use with the new computer?

  I chatted with technical support that keeps saying that it's a compatibility problem, to install with old OS X or buy a newer version. But I know that CS5 works with Yosemite (as I use it myself), and the only question I had is that serial # says invalid, which is separate from the functionality of the program.

  I'd rather not spend hundreds more to get a new suite, when I spent a lot for CS5 already and know is fully functional on Yosemite.  I have also not return to an older operating system and break things.

  Moreover, I used to be a general technical Support and I am a coder of web applications, so I understand that this isn't just some sort of "reboot" of the question

  No info to solve this, or a means to achieve at the highest level Tech support, would be greatly appreciated!

  Thank you!

  Transferred apps will certainly question of activation, because licenses files creation is completely dependent on machine, it willl created according to the particular Machine ID, if you transfer the application from one computer to another, there is incompatibility.

  Therefore, it is very necessary that you are using the original installation media.

  Download the CS5 products

  If you do not agree with the process of removing and reinstalling, try wiping the contents of SLCache and rename the SLStore folder.

  
  

  WARNING: Do not forget once erase you the contents of this folder, all Adobe applications will ask the new license or re-enter the serial number.

  Location: /Library/Application Support / Adobe.

  It is strictly recommended to install Adobe applications using the original installation media.

• Reference Dell coming 8 Pro poor choice of taking Micro has USB with USB Micro-B plug. Already broken!

  Got the Dell coming 8 Pro Tablet and there seems to be a great Windows Tablet. But I already broke one of the pins in the Micro USB connector. Funny, it is taking the Tablet is a rectangular Micro-A and the power cable plug is Micro-B (form no-brainer which allows you to plug in the right direction, if the plug is also Micro B). You can easily put the Micro-B plug in the Micro-A plug in the wrong way, and if force you it, it will break the pins inside. Just like I did today! I don't know who in the world made this choice! I have been using Android phones that are using the Micro-B Plug and a Micro-B plug correctly!

  For my problem, I'll try to call Dell and see if they will replace the connector. :-(

  Again device shipped, put the old device in box to send back for warranty. Tech couldn't confirm whether or not I would be charged. For me they will say it is the end user damaged and charge me for a new tablet.  If the end-user damaged, which I do not think that it is, I would rather just replace the USB jack, but do not have this option.  FYI - supervisor confirmed that Best Buy didn't was NOT a local tech - happy I rally call would have laughed if Geek squad guy