Reference DELL demanding $80 for a share of $5.90

Similar Questions

• Reference Dell Custom Image for Vmware ESXi 5.1

  Hello

  where can I find the custom image Dell for ESXi 5.1.

  I can only find the ISO Images for 5.0 (4.1). But none for 5.1. Unfortunately the original ISO Vmware image will not work because it does not find a NETWORK card in my Dell R420. Which seems to occur as long as the original image from Vmware does not include the card driver NETWORK Dell to the R420.

  I saw that today there is a download section at support.Dell.com for ESXi 5.1 with about 36 files to download. But no ISO Image for ESXi 5.1 as it is 5.0 and before.

  Hope someone can help or knows how Dell will bring the custom image.

  Thank you!

  Here is the link to the ISO image of the ESXi 5.1 custom newly released Dell. Sorry for the delay to everyone - out www.dell.com/.../poweredge-r620

• Reference Dell Open manage for PE2950 for WS2012R2

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  I know it's there because I installed it in the last company I did part of the management, but for the life of me, only two years later, I can not understand where we got the original installation to do this.

  I downloaded installed three or four to manage open on the page drivers for our service number, but one of them came with "[I'm just a patch]" and the other three have indicated that they were not compatible. Even if we set the operating system to Windows Server 2012 R2, it always gives me "for 32-bit node,' then maybe we're missing something else.

  I am hoping to win the lottery here and have a Dell technician take pity on me and direct me to a FTP location I can give to my manager so that we can get this software down to all the systems in our network.

  I can't be the only person who has faced this issue, but I may be the only person who was not able to fix it on their own.

  Help, please.

  daveepperson86

  I tried to access the management system opened on our hyper-v Server today, but my manager told me that there is no such thing as a version of open management, for the PE2950 on Windows Server R2 2012 and it is out there for something fancy like a R6 * / 7 * /-8 *.

  Fake. You will find it at support.Dell.com, select your system, change the selection in the drop-down list of OS, then check out managing systems for OpenManage Server Administrator (Managed Node). The 32-bit version is fine and installation of WoW 64-bit operating systems will be activated (all except the ' core' by default).

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=V1JDD

  You can also go to http://ftp.dell.com.

• Reference Dell Desktop-replacement for Nvidia GeForce GTS 240 graphics card

  Nice day. I hope an expert can help me.

  My computer: Desktop computer Studio XPS 8100 Dell, intel Core i7 870 2.93 GHz, 8 MB, etc.
  Graphics card: NVIDIA GeForce GTS 240 single memory 1 GB. Reading, not sold at retail and is now no longer available.
  Unit of power: 350 Watt maximum.

  I do not use the computer to play games.

  For various reasons, you can Please provide DETAILS for me a graphics card in replacement of approximately the same 'power' +. I can myself, slot load driver and be operational. Don't not changing other pieces (I hope) and there seems to be so many available graphics cards.

  I hope for the purchase of the graphics card via Internet, British supplier and then abroad for me.

  In the meantime, thank you for your help.

  Leonard

  Hi Skanter - just saw this message-hope it comes in time

  I had this problem with mine - it was also to achieve 90degC. It is caused by a really poorly designed cooling system - the fins of the radiator are locked behind a metal shield and the fan blows into it.

  What you need to do is: -.

  (1) turn off and unplug everything from the PC

  (2) open the side panel and disconnect the audio cables and power of GPU

  (3) remove the mobo

  (4) with the help of a tiny posidrive screwdriver, unscrew the thin metal cover of heat sink

  (5) use a brush to remove all the dirt you may see! DO NOT BLOW IT OUT WITH YOUR BREATH!

  (6) reassemble and hopefully enjoy the silence!

  If you still get the noise the chances are some dust penetrated fan (this happened to me when I used compressed air to blow the heat sink). Replacement fans are as rare as horse poop to switch I could not even one of the original manufacturer (path to the bottom of the chain - don't expect any help from Dell or nVidia here, I'm afraid) but are thankfully easy to fix.

  GTS 240 fan fix: -.

  I do memory-sorry if I get something slightly wrong!

  (1) remove a map as shown above. Once the radiator fan cover will be exposed.

  (2) very gently, using a pair of small screwdrivers hanging under the blower rotor, gently lift the rotor clear of the case. He doesn't want to go at first, but be patient and try and apply steady pressure on each side.

  3) out of the bearing once clean any muck-it only takes a small amount here because of the noise.

  4) applied with a headset, a tiny (and I mean tiny) bit of WD40 (don't know what this is called in the United States-but it's a wonder spray!) for the bearing

  (5) wipe off - you'll need that the strict residue on the tree

  (6) reassemble and get started!

  If you are worried about prising off the rotor (or indeed I was wrong) you can undo the radiator all of PCB by unscrewing the screws with springs on them - this allows access to the screw bit to hold the fan. Then you can cancel these abd slide the cable out which means that you can clean the bottom - but the rotor must always be removed to lubricate the bearings.

  Good luck

  Nick

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.

• Reference Dell 3110cn of Laserjet + os El Capitan

  My MacBook Pro (2009) stopped my Dell printer. News on this please.

  Hi deaconjo,

  as I had the same problem, I found a solution for my El Capitan MacPro 2008:

  Search for the following installation program:

  3130cn_Installer_And_Application_Dell_A04_MAC.dmg

  Inside this package you will find the driver for 10.7 and higher. After installing the package I could add an IP printer with this driver:

  Reference Dell 3130cn Color Laser v3017.104 PS

  With this driver installed, I can use my printer Dell 3110cn without problem.

  Perhaps it might help you too.

  Concerning

• Reference Dell 2007FP vs HP zr22w

  Hi guys, I use t410s now. You want to find an IPS monitor. Currently have two choices.

  Reference Dell 2007FP (handed to nine 30-day warranty) $95

  HP zr22w (new, 3-year warranty) $175

  What would be a good choice?

  Not for the game.

  But need good color, good text, Word process, sometimes a movie.

  The HP zr22w DP, is better than the VGA to connect to my T410s?

  

  Thank you!

  Your information is so helpful. But I think that I can not check the number helpfully I ordered from DELL FINANCIAL SERVICES. Thank you very much!

• Reference Dell place 8 just out of warranty and dead now?

  Hello

  Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.

  I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14

  What a *.

  Reference Dell of mobile devices (phones) & tablets
  1-800-308-3355 24 / 7

  http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

• Reference Dell E6420 randomly not SSD detection at startup

  Specifications of the computer:

  Dell Latitude E6420, Intel Core i5 2520 M, 2 x 4 GB = 8 GB of RAM, Nvidia NVS 4200 M, 250GB HDD, Win 7 Pro 64, Bios A23

  The value of operation SATA AHCI and not quick start. I have 3 of these computers. They are all out of warranty.

  I replaced the original 7mm Hitachi 250 GB for the Intel 535 240 GB SSD HARD drive.

  I used Acronis True Image 2016 to clone the hard disk SSD. Cloning process is very much like on any other computer.

  The problem is that each cold 4 or 5 boots the computer cannot find the SSD drive. Restarting the computer solves the problem of that time. I have to find a solution. I want to sell them with a SSD and not with a HARD drive.

  I tried the things:

  Update the Bios of the A14 to A23.

  Put a spacer of 2mm on the SSD and of course the resettlement of the SSD.

  Exchange for another Intel 535 120 and 240 GB.

  Clean install of windows I knew was a waste of time because it does not affect the BIOS does not detect not things.

  Googling the problem for hours.

  Call dell?

  Use another brand of SSD? He probobly won't make any difference to look at other threads.

  Use a HARD drive? Last resort. I can't stand slow hard disks regularly.

  Reference Dell E6420 seems to work with a Samsung 850 Evo 250 GB instead of the Intel 535 very well. Tested over a period of 3 months with no problems. Threw 535 readers intel in the desktop instead.

• Reference Dell WinPE 5.0 driver CAB

  I have SCCM SP1 R2 and the Dell customer integration Pack 3.1 2012.  When I try to import the ACR 5 of WinPE from the SCCM console, it fails with 'the selected driver package is incompatible.

  Does anyone else have this problem?  My understanding is that SCCM R2 supports Win 8.1, which is what Win PE5 comes.

  Thanks in advance

  Tony

  Hi Tony,.

  Reference Dell Customer Integration Pack 3.1 is not support SCCM SP1 R2 2012. CAB WinPE cannot be imported via CPID 3.1 and it has to be injected for the boot image. Also try the last 5.0 WinPE that is available in the link below

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/5029.WinPE-5-0-driver-cab.aspx

  Thank you

  Pascale Raja

• Reference Dell - never!

  I bought two computers in July 2009. I had problems with both of them. Inspiron mini had a problem with wireless, Dell said was my fault. and refused to fix it until I told them. I wanted to return it them. Finally they gave me a free support and support person said that there is something wrong with the computer I received.  Something other than the computer is unbalanced and wobbles when he types. I sent the compture to get fixed and it never got fixed.  I thought I would just deal with it because you get what you pay for.

  In January my XPS studio crashed. Screen has become sell contact of Virgin material and the damage. So I called dell. It took them a month to figure out, and indeed there is something wrong witht the computer. Thus broke computer I couldn't use it for a month. Finally I got the new memory and hard new dirve. The next day, my computer crashed. He spent a month trying to say Dell that something was wrong with my computer. All that time I spent 30-75 minutes on the phone with technical support. It was time that I called 4 days a week. I bought long and costly warrenties on my computer, including hardware and software. Not to mention cell phone chargers. Finally I conviced someone as my computer is really broken and they agreed to send me another computer. I'll go at least a computer that works. Understandable that it would take some time to get my replacement. My replacement date came and went. I called Dell again 45 minutes on the phone.  Then I've been transferred several times. The rep that I talked to said that they have not yet started doing my replacement.  It has been frustrating and I think that he was treated in a disrespectful way, what happened to quality customer service.

  On top of that today I was warned that even if the company has already approved my payment of $ 1,500, they now can't seem to find a record of the transaction and consider my past due account.  Also, they refused to refund my money and couldn't give me any assurance that the situation would be resolved.

  Anyone has any advice on the purchase of an Apple, I hear they have great customer service and wonderful tech support.

  I just wanted you to know that you aren't the only one with all these problems.  I am struggling with for more than a month to replace my computer. Finally, on March 1, they said they would and they have placed an order.  Now a week later it stil is not delivered because they can't find a 'HARD' for my computer.  REFERENCE DELL SUCKS AND I WIL NEVER BUY ANOTHER.    I put a post of "do NOT GET ALL the ANSWERS.

• Reference Dell 6224 and 5448

  Hi team,

  I'm new dell switches - exposed to cisco switches. I am faced with new kinds of problems with these dell switches. Unable to provide a fix and fight for the last 5 days. Pls help me. Below is my script

  Two nw - 2.0 and 3.0 is required to be configured in VLAN, VLAN ID 2 and 3.

  VLAN 2 - 192.168.2.1

  VLAN 3 - 192.168.3.1

  N/W 2.0 and 3.0 N/W machinery will be shared 48-Port powerconnect switch 5448 DELL

  The routing part arrives at 6224 power connect - gateway for vlan 2 - 192.168.2.1 and bridge for VLANs 3 - 192.168.3.1

  The switch of two is ascending through fiber optic - spf port cable

  This is the configuration I did-

  5448 switch-

  database of VLAN

  VLAN 2, 3

  output

  interface vlan 2

  switchport access vlan 2

  GVRP enable

  Routing

  output

  interface vlan 3

  switchport access vlan 3

  GVRP enable

  Routing

  output

  interface ethernet 1/you/1

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  output

  interface ethernet 1/g1

  switchport access vlan 2

  GVRP enable

  output

  interface ethernet 1/g2

  switchport access vlan 3

  GVRP enable

  output

  Uplink port is TE1 (Layer 2) to XG2 (Layer 3)

  Reference Dell 6224 can connect

  Configure the terminal

  interface vlan 2

  no downtime

  IP 192.168.2.1 255.255.255.0

  Routing

  output

  interface vlan 3

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  Routing

  output

  interface ethernet 1/xg2

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  Computer with 192.168.2.100 / 24 GW 192.168.2.1 connected to layer 2 switch g1 - vlan 2

  When I ping 192.168.2.1 - accessible United Nations host destination

  Even the wise

  Computer with 192.168.3.100 / 24 GW 192.168.3.1 connected to layer 2 switch g1 - vlan 3

  When I ping 192.168.3.1 - accessible United Nations host destination

  Any thing that has missed out in the configuration part / all bad entries. I'm not sure now how to treat this. Pls help me and it is an urgent task for me

  Thank you

  With multiple VLANs, you need to use the general/Trunk mode. With the help of the info we have I made a diagram to help show the location of the switches and parameters on them. Obviously things can be different, such as PVID, IP address, VLAN ID etc are all customizable to your needs. But the page layout modes and the port will remain the same.

  

  STP will not fill the VLAN on the other switches. It's probably the GVRP feature it refers. With such a short race, it is more practical to manually add the VLAN. At least for the initial Setup, then once everything works enable GVRP to accommodate future expansion of VLAN.

  Hope this helps some.

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd