Reference DEll EQL PS4100x

Similar Questions

• Reference Dell EQL PS4100xv problem with MS SQL replication

  Hello

  I have a Dell PowerEdge server R420 connected to an EQL. Is installed ESXi 5.1 U1 (free version). It is only a data store.

  VM is running Windows 2008 R2 STD with MS SQL 2008 R2 STD. The change in size of database per day is around 2 to 3 MB of base on my daily full backups via the MS SQL backup.

  However, when I throw a replication session between my EQL PROD and DR EQL which size of delta is ranging from 1 GB to 50 GB every time that I run a replication? Interval is about 5 to 10 minutes. I tried 20 minutes also the size to replicate is erratic.

  Why is so huge its more than 1000 MB per replication.

  Hope someone can help me with that.

  Thank you

  Paul

  Re: Storage Direct.  Yes, if you configure these volumes SQL replication, only the changed data will be included.  Only VM will see to all the files in the data store.   However, you still want to replicate your VMFS, but not as often as SQL datastore.

  Re: optimize.  Article I included has the registry setting you need.  This works for all storage formatted to NTFS.

  In addition, when you format the SQL data / log volumes, has the NTFS 64 K cluster size.   The default value is usually 4 or 8 K.  This will align all the writings and readings on the 64K of distribution of the EQL table size.   This improves performance of I/o.

• Reference Dell Eql SANDRA use only not all configured NIC

  Have 1 virtual (in hyper-v) server with 4 NICs. Server OS Sp1 with EQL ASM Win2008R2 is version 4.5. The lan NIC is excluded by subnet in auto-snapshot manager/MPIO settings.

  3 SAN adapters are in a different subnet and are "inclusive". The 3rd nic has no active sessions to the storage group. Tab connections ISCSI MPIO confirms its authorized to connect to the San. Instead of 3 connections to the volume on 3 network cards, he made 2 connections to 1 etc...

  I tried the EQL ping to IP configured for that particular network interface card, got no response. The 2 other IP's ping requests. Checked the Hyper-V host; The NIC 3 are in the same Vlan. This virtual server is the only one connected to the San with this problem.

  Any ideas on why and how to solve this problem?

  I was talking about the specific cable and port associated with this NIC there could also be a bad network card.

• Reference Dell 1700 crashed and I have no backup

  Reference Dell 1700 crashed without backup whats a girl to do
  
  

  lost all programs can run does not help

  Reference Dell 1700 crashed without backup whats a girl to do

  
  

  lost all programs can run does not help

  Reinstall Wndows.

  Reinstall all your programs from the original media or downloaded files you have saved on an external drive.

  Reinstall all your data from the backups that you made on an external drive.

  If you have not, you're out of luck.

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• Reference Dell MEM installation fails

  Hi all

  Previously on my hosts ESXi 4.1 I could quite easily set up the MEM from Dell (1.1). Now, I am trying to install 1.2 on a 5.5 ESXI host (new installation always in eval mode).

  I have a new installation of vSphere-VMware-CLI - 5.5.0 - 2043780 however, every time that I run the setup.pl

  for example setup.pl - configure - server = 10.2.6.xx

  I get the following (tried on 3 different PCs).

  C:\MEM>dir
  Volume in drive C has no label.
  Volume serial number is 34 c 0-7582

  Directory of C:\MEM

  16/12/2014-16:05

  .
  16/12/2014-16:05 ...
  12/12/2014 09:08 503 327 110-6093 - R4_EN_MEM_Guide_web.pdf
  19/09/2013 01:20 3 983 015 dell-eql-mem-esx5 - 1.2.0.365964.zip
  19/09/2013 01:20 120 474 MEM - Fix_List.pdf
  19/09/2013 01:20 222 831 MEM - Release_Notes.pdf
  19/09/2013 01:20 503 327 MEM - User_Guide.pdf
  19/09/2013 README.txt 3 039 01:20
  19/09/2013 setup.pl 116 371 01:20
  7 file (s) on 5 452 384 bytes
  2 dir 4,946,833,408 bytes free

  

  C:\MEM>Setup.pl--configure--server = 10.2.6.63
  Could not find SOAP/Lite.pm in @INC (@INC contains: C:/Program Files (x 86) /VMware/)
  VMware vSphere CLI/Perl/site/lib C:/Program Files (x 86) / VMware/VMware vSphere CL
  I have/Perl/lib.) in C:/Program Files (x 86) / VMware/VMware vSphere CLI/Perl/lib/WSMan
  Line 5 of WSBasic.pm.
  BEGIN failed--compilation abandoned to C:/Program Files VMware/VMware /(x86) vSpher
  e CLI/Perl/lib/WSMan/WSBasic.pm, line 5.
  Compilation failed in require to C:/Program Files (x 86) / VMware/VMware vSphere CL
  Line 3 of I/Perl/lib/WSMan/GenericOps.pm.
  BEGIN failed--compilation abandoned to C:/Program Files VMware/VMware /(x86) vSpher
  e CLI/Perl/lib/WSMan/GenericOps.pm, line 3.
  Compilation failed in require on line 20 of the C:\MEM\setup.pl.
  BEGIN failed--compilation abandoned on line 20 of the C:\MEM\setup.pl.

  C:\MEM >

  Any ideas?

  Thank you

  Script using vSphere CLI which is based on PERL and the question is what minumum Version is necessary and if there is a reason why the SOAP package is missing, because it looks like it is already partially installed on your system.

  So go to vmware.com and install the vSphere CLI or vSphere Perl SDK for WINDOWS. You can install only one version of this package. After that, open a new shell window and try again.

  Do not confuse on vSphere PowerCLI which is the Powershell Version of the vSphere API.

  BTW. We use VUM or esxcli to install the MeM, but you must configure the vNetworking and iSCSI binding manually or by using a profile of the host.

  Kind regards

  Joerg

• Reference Dell 3110cn of Laserjet + os El Capitan

  My MacBook Pro (2009) stopped my Dell printer. News on this please.

  Hi deaconjo,

  as I had the same problem, I found a solution for my El Capitan MacPro 2008:

  Search for the following installation program:

  3130cn_Installer_And_Application_Dell_A04_MAC.dmg

  Inside this package you will find the driver for 10.7 and higher. After installing the package I could add an IP printer with this driver:

  Reference Dell 3130cn Color Laser v3017.104 PS

  With this driver installed, I can use my printer Dell 3110cn without problem.

  Perhaps it might help you too.

  Concerning

• Reference Dell Sonicwall SRA

  Hey guys, more of a statement than a question. If you have a Dell Sonicwall and users do "found no appropriate group" of course the same user does not exist as a local user and a domain user. This will cause problems. Took me a while to understand that >.<>

  Good thought.

  Thank you
  Ben D
  Reference Dell SonicWall
  #Iwork4dell

• Reference Dell 2007FP vs HP zr22w

  Hi guys, I use t410s now. You want to find an IPS monitor. Currently have two choices.

  Reference Dell 2007FP (handed to nine 30-day warranty) $95

  HP zr22w (new, 3-year warranty) $175

  What would be a good choice?

  Not for the game.

  But need good color, good text, Word process, sometimes a movie.

  The HP zr22w DP, is better than the VGA to connect to my T410s?

  

  Thank you!

  Your information is so helpful. But I think that I can not check the number helpfully I ordered from DELL FINANCIAL SERVICES. Thank you very much!

• Using NDMP for backup battery Dell EQL PS4000 volumes

  Hi team,

  One of my existing clients is pleased to use NDMP to backup volumes and vsphere two data warehouses are on Dell Eql PS4000 table.

  (a) how can we use NDMP with EQL?

  (b) what are the required components to enable this feature to make I need to FS7500 or any software backup?

  (c) procedure and configuration of activation NDMP with EQL?

  Please advice possible options.

  Thank you

  NDMP is not supported by the table itself.  The table is storage of blocks, NDMP requires access to the files.  The host to connect to the storage must support NDMP.

  With a FS7500 you can do.  You will need to create based NFS data warehouses and migrate all virtual machines there.

  They looked by backup software existing for VMFS data storage?    Because the backup software must support NDMP anyway.

• Reference Dell place 8 just out of warranty and dead now?

  Hello

  Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.

  I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14

  What a *.

  Reference Dell of mobile devices (phones) & tablets
  1-800-308-3355 24 / 7

  http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19