Reference Dell FS12-NV7 information?
Hello
There is a seller on eBay unloading a bunch of servers listed as "Dell FS12-NV7" models They have a list of equipment of: 2 x 6 AMD processors, 32 GB of RAM, 12 (no drive included) HARD disk trays, dual-port gigabit ethernet (looks like on board, not an addon card) and a power supply non redundant-500W. I googled and searched on the dell site, but I can't seem to find information on this model. Some results push me towards EquiLogic systems, but I don't think that's what it is. Can anyone out there shed light on it?
If it pans, I could take one buy an extra (or even replace) ESX host and combine it with my current NAS. But I need to know what are these things before I bite :). The photos have no serial number, and when I asked for one, the salesman said that there is no serial number or code express service on it, which seemed weird.
We see a lot of them (or similar models) here on the forums... they are not standard models of Dell; they are special make-up-made by Dell, for some company, according to their specifications. They seem to rely on the "cloud" servers Dell (the latter the C2100 or C6100), because they have very similar features and appearance. They have good features, but just to go because you will get no documentation or support (including drivers and firmware) from Dell. If you buy it, buy it as a generic white box server and not as a Dell.
Tags: Dell Servers
Similar Questions
-
Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD
Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.
Hello
1 have. what fixit you tried?
2. don't you make changes to the computer before the show?Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.
-
Original title: unable to print. Reference Dell 944 communication usb port is not available.
Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems. I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?
DavidNicholsonXN,
How to download and install drivers in the correct order
also try to read...
The owners of all-in-one printer Dell 944 thread (W7)
Let the printer after Kaspersky
Rick
-
Reference Dell pc with xp family. Restart to the logon screen
Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?
Peek into the registry to find clues.
Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information. Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.
1. right click on my computer and select Properties.
2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
3 clear the automatically restart box and OK your way out system properties.Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.
How to configure Windows XP to start in a "clean boot" State
John -
Reference Dell M1000e + aggregator MI/O port mapping
Hi all
I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?
My hardware:
- 1 x Dell M1000e
- 2 x M i/o aggregator (A1 & A2)
- 16 x M630 Blade (Qlogic 57840 S ANC four ports card)
Reference DELL M/o aggregator:
(reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)
I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.
Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)
Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)
FYI - I would like to install ESXi 6.0 on all blades
Thank you!!
Vinay
Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.
You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.
Unidentified:
Dell (conf) # tengigabit interface 0/16
Dell(conf-if-te-0/16) # vlan unidentified 4
Output Dell(conf-if-te-0/16) #.
Tag:
Dell (conf) # tengigabit interface 0/16
The tag vlan Dell(conf-if-te-0/16) # 4
Output Dell(conf-if-te-0/16) #.
Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.
By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.
The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.
For redundancy, you could stack the units together. 241 page details the process of stacking.
Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.
-
Reference Dell 2007FP vs HP zr22w
Hi guys, I use t410s now. You want to find an IPS monitor. Currently have two choices.
Reference Dell 2007FP (handed to nine 30-day warranty) $95
HP zr22w (new, 3-year warranty) $175
What would be a good choice?
Not for the game.
But need good color, good text, Word process, sometimes a movie.
The HP zr22w DP, is better than the VGA to connect to my T410s?
Thank you!
Your information is so helpful. But I think that I can not check the number helpfully I ordered from DELL FINANCIAL SERVICES. Thank you very much!
-
Reference Dell place 8 just out of warranty and dead now?
Hello
Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.
I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14
What a *.
Reference Dell of mobile devices (phones) & tablets
1-800-308-3355 24 / 7 -
Reference Dell place 8 pro and 3g mobile hotspot
Hey dell community.
I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!
When I plugged it it will say limited.
None fixes please?
Bobby Burgess
Hi Bobby,.
I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots. Try the suggestion in this thread and see if it helps.
NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.
When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died; Let the Tablet turned off for 2 minutes; and restart. Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.
Todd
-
Reference Dell all-in-one printer 922-is not recognized in windows 8
Dell all in one 922 printer works is not in windows 8
Hi Linda,.
You can visit the link next to the Windows Compatibility Center that describes the Dell 922 Photo all-in - one Printer is not compatible with the Windows 8 operating system:
However, you can try to install the printer in Windows 2000 or Windows XP compatibility mode and check if this solves the problem.
Reference Dell Photo All - In - One Printer 922, v.G21, A04
http://www.Dell.com/support/drivers/us/en/04/driverdetails?DriverID=R102523
To install printer drivers in Windows 2000 or Windows XP compatibility mode,
a. right-click the installation file, and select Properties.
b. click on the compatibility tab.
c. in compatibility mode, check the run this program in compatibility mode for: option.
d. Select available options under Windows 2000 or Windows XP .
e. click apply and OK.
See the link below for more information about compatibility mode:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Reference Dell 1700 crashed and I have no backup
Reference Dell 1700 crashed without backup whats a girl to do
lost all programs can run does not help
Reference Dell 1700 crashed without backup whats a girl to do
lost all programs can run does not help
Reinstall Wndows.
Reinstall all your programs from the original media or downloaded files you have saved on an external drive.
Reinstall all your data from the backups that you made on an external drive.
If you have not, you're out of luck.
-
Reference DELL T420 - battery on PERC H710 adapter controller
Hello
I received a yellow warning
Reference DELL T420 'Battery on PERC H710 adapter controller'
What it means?
What should I do?
Order the new battery?
It is a simple replacement mission?
Is it essential?
Update:
test URL
http://www.Dell.com/support/article/us/en/04/SLN130018
Have nothing, everything seems fine now...
Thank you
It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.
-
Reference Dell 3110cn of Laserjet + os El Capitan
My MacBook Pro (2009) stopped my Dell printer. News on this please.
Hi deaconjo,
as I had the same problem, I found a solution for my El Capitan MacPro 2008:
Search for the following installation program:
3130cn_Installer_And_Application_Dell_A04_MAC.dmg
Inside this package you will find the driver for 10.7 and higher. After installing the package I could add an IP printer with this driver:
Reference Dell 3130cn Color Laser v3017.104 PS
With this driver installed, I can use my printer Dell 3110cn without problem.
Perhaps it might help you too.
Concerning
-
Hey guys, more of a statement than a question. If you have a Dell Sonicwall and users do "found no appropriate group" of course the same user does not exist as a local user and a domain user. This will cause problems. Took me a while to understand that >.<>
Good thought.
Thank you
Ben D
Reference Dell SonicWall
#Iwork4dell -
Reference Dell E6420 randomly not SSD detection at startup
Specifications of the computer:
Dell Latitude E6420, Intel Core i5 2520 M, 2 x 4 GB = 8 GB of RAM, Nvidia NVS 4200 M, 250GB HDD, Win 7 Pro 64, Bios A23
The value of operation SATA AHCI and not quick start. I have 3 of these computers. They are all out of warranty.
I replaced the original 7mm Hitachi 250 GB for the Intel 535 240 GB SSD HARD drive.
I used Acronis True Image 2016 to clone the hard disk SSD. Cloning process is very much like on any other computer.
The problem is that each cold 4 or 5 boots the computer cannot find the SSD drive. Restarting the computer solves the problem of that time. I have to find a solution. I want to sell them with a SSD and not with a HARD drive.
I tried the things:
Update the Bios of the A14 to A23.
Put a spacer of 2mm on the SSD and of course the resettlement of the SSD.
Exchange for another Intel 535 120 and 240 GB.
Clean install of windows I knew was a waste of time because it does not affect the BIOS does not detect not things.
Googling the problem for hours.
Call dell?
Use another brand of SSD? He probobly won't make any difference to look at other threads.
Use a HARD drive? Last resort. I can't stand slow hard disks regularly.
Reference Dell E6420 seems to work with a Samsung 850 Evo 250 GB instead of the Intel 535 very well. Tested over a period of 3 months with no problems. Threw 535 readers intel in the desktop instead.
-
Reference DELL demanding $80 for a share of $5.90
Laptop Inspiron 5758 bought April 2015, had the power switch replaced under premium support Oct - 15, 2 days after the end of my premium (to July 19) support switch has not yet. Card replacement (of the power T2CVC button) costs between $5.90 and $15, but is out of stock on every site I can find. Reference DELL tell me or send my laptop to be fixed @ $169, either to buy the small Board that DELL has a monopoly on cost me $85 (Anurag Srivasava3 July 21, 12 h 50 HE)
This is outrageous, this is a new laptop and I expect at least Council (oct-2015) replacement work would be covered or DELL would have at least the care that I have a computer DELL with a hardware fault rather enjoy my situation and make huge profits that they would send me a part at normal price.
Check out this link.
Dell Inspiron 17 (5755 / 5758) power of button with cable - T2CVC
They can notify you when it's back in stock...
Maybe you are looking for
-
F5521gw Driver Update for T420s in accordance with the T430 systems...
Hi guys,. You have pushed out a 7.1.1.0 update driver for the F5521gw card for the T430 but have not updated the T420 systems for the same card. Pilots of the T430 works on my T420s so out of curiosity, why isn't he there had an update for us guys? B
-
I need to know if I should buy a new wifi card?
Hi, so I have an acer aspire computer 5750z, earlier my wifi suddenly stopped working, but ethernet is fine. I searched on the internet and tried to install the required driver (Atheros), but when I try it says that the "reader could have been eject
-
I tried copies of files, but there are too many files to fit on a single disc. and go file-by-file will always there are probably 1000 data files. All are DOS program generated with 8 letter names.
-
7010 OptiPlex desktop computer - adding a 2nd HARD drive?
Is there place, in the case of funds 7010 for a 2nd hard drive? And any other necessary mounting material is none other than the screw, then an additional SATA cable? Thank you Robert
-
Windows 7 - network system icon disappears
I did an upgrade installation on my laptop from Vista business to Windows 7 Professional and everything works fine, except the icon of system network has disappeared. This is the case, even though I am connected via Ethernet to the Internet without