Reference Dell m2 / NVME specifications and requirements to upgrade for Optiplex, Latitude, XPS and Precision Mobile

Similar Questions

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd

• Reference Dell 6248: hot swapping and upgrade battery links

  I have a set of switches Dell 6248.  I have a few questions to explore:

  (1) can I add/remove the CX4 cables while the switch is working?  (I guess it's the same rules as a cable normal Ethernet...)

  (2) can I add/remove modules while the switch is working?

  First scenario I'm looking at: extend the stack on a stacked rack.

  I think the process here is, install a switch of spare with stacking module, run off battery cables to the battery, breaking and re-Assembly of the ring, then turn on the switch, confirm the ID stack and connectivity and migrate customers to it.  I can totally hot cables plug the CS4, right?

  Next scenario I'm curious: upgrade of 12G to 48G stack.

  Can I exchange the accumulated 12 GB card and swap the 48G card in when the switch is on, or do I have to turn it off?  Connectors on the 48G card the same?  (CX4..)  Can I / layout 48G and 12G cards in a pile during my upgrade?  Is the maximum length of cable the same (3 m) on a stack of 48G?

  Thank you!

  -danny

  Hey Danny,

  The stackable modules are not hot-swappable. The cables are, but for the modules to detect that it must present when the switch is started. A reboot is also required for stacking on these ports using Ethernet. Yes 48 GB stackable modules also have a 3 meter cable.

• Reference Dell 6gbps SAS HBA and Powervault TL4000

  Hello.

  We have a server Poweredge R620 with Windows 2008 R2, two Dell 6gbps SAS HBA cards installed and Simpana software backup R2 9.0.

  We also have a TL4000 with two IBM drives, all firmwares are up to date.

  Each SAS HBA card is connected to each drive in the library via a single cable SAS.

  I can see the cards in the Server Device Manager.

  The library works, but when I monitors the status of the disk in the web interface of the ilbrary, the two ports and B seem to 'not ready, not connected. "

  I tried to use Simpana to detect the library. But it cannot detect anything after dozens of tests and scenarios.

  What I am doing wrong? I can provide all of the information you want.

  Thanks in advance.

  Problem has been resolved with the help of Bestami Bayramoglu of Dell Technical Support team.

  I took some pictures of the rear of the server and the library and sent them to Bestami.

  They analyzed and was told that the SAS cards were not inserted and locked properly.

  These cables are equipped with a locking mechanism and they do not work if they are not inserted and locked properly.

  Another question for readers; SAS cards inside my server r.620 part number is j53x3. Crack of metal of this card is not compatible with my server in a rack. The correct we reference number is 3ddjt.

  Bestami told me about this and we will order correct.

  Thank you for your support.

• Reference Dell 3100cn impression faded and white bands on the right side

  I have a Dell 3100cn that has about 3 years and I started to experience 2 lines of dots down the right side in each of the CMYK about 1 inch from the right margin.  With some additional impressions, points has continued and the right margin collapsed to some.  When he meets it, I inspected the original drum, which had 13 000 impressions color top and found a pattern of noticeable wear on the roll right where the points emerged, which is also in the middle of the faded area.

  Since then, I've replaced all 4 cartridges (no change) and the drum (this removed the points) and the points are gone, but faded on the right side are always present and sometimes introduce a little yellow toner into a stipe as well.  Any ideas what may be the cause - possibly a roller needs to be replaced?

  Here are some pictures of the problem: http://picasaweb.google.com/kerrylandis/Dell3100cn?feat=directlink

  Any help would be most appreciated.  Thank you!

  Kerry

  Did you clean the stuff off the coast of the new drum unit? There SCRATCHES, left on the drum, after that you do? If so, this drum unit is "toast".

  Once again, excellent photos. Nothing seems to be "demonstrably" false except for one thing... I noticed you are using 3rd party toner carts. In this model of printer, which is bad news. I'm sure they are cheaper, but in the long run, you'll end up paying a lot more to get your machine fixed.

  3 toners (in this printer class) do not have the same OEM toner xerographic properties. In your case, it seems as if the black toner from the black developer is agglutination at the drum, preventing all other colors to make an efficient transfer. You will need to replace all the 4 cpl developer and all 4 carts of toner (with original parts) just to be sure. Not cheap.

  By law, manufacturers of printers are prohibited by the "us clay Act and Sherman Act ' and the 'Canada competition law" and other laws of you ask to use their cartridges. That said, this Bill does not mean that OEMs are responsible for repairs when downgraded 3rd party or products are used in their machines. Also, this Act does not require manufacturers to share their toner formulation... usually a trade secret... with their competitors.

  Some manufacturers use special formulas for their toner. All 3xxx/5xxx series Dell COLOR laser printers fall into this category. IF 'other' toner is used in the machine and the machine is damaged, repair of that circumstance is NOT covered by your warranty. In other words, you will have to pay for the repairs until the machine is fixed, then, the machine is back on warranty. I know from personal experience that Dell has this policy.

  I know your warranty not on now... but it will cost you some $$ if you want to restore this machine perfect condition. More than $$ printer is interesting, but it's your decision. (you might think of parting with the machine on eBay)

  Personally, I no longer buy third party carts... NONE of the 3rd party resellers ask if they will guarantee repair of the printer costs if their product causes damage. If they say yes, ask in writing.

  Sorry I don't have better news for you.

• have updated a reference dell dimesion 4700 xp and have no audio

  I've updated a dimension 4700 dell xp I have no audio and might miss install something. I am a newbee and the guys over at upgrades have helped me, I don't know I tried their patience, bless Bill Smithers. Daavee and XPROCKS and also Geek.And Tech a few others!

  I malaware bytes, antiviruis and avast superspy, oh and CCleaner. I use Mozilla Firefox.

  Thank you for all your help

  Sincerely,

  Gina

  Hi Gina,

  Please you can proceed as follows: -.

  • Click Start, and then click on run
  • Then, in the run box, type devmgmt.msc and press enter
  • Make a note of all the units have an exclamation against them - including system devices - and tell me what they are in your next reply
  • Also to make a note of all devices listed in the other devices section (click on the + to expand this section)
  • In addition, Please enlarge the display of the maps section (click on plus the sign +) and tell me what is stated here

  Tricky

• Reference Dell place 11 Pro and Dock

  Hi all

  I have a Dell coming Pro 7130 11 and the docking station. I can't have an external display to work using the HDMI port or display connectors. I have 2 Dell E198WFP (1440 x 900), the two connecting using DVI inputs. Display sometimes appears, but does not have the resolution or refresh rate tries to run at 75 Hz despite being set at 60 Hz

  AFAIK drivers etc are all up to this date, the tablet can connect to an external monitor using the construction to the mini HDMI port without problem?

  Any suggestions, anyone please?

  Hi, the dock rarely works for me... the workaround I found is to unplug power dock and plug back in. (works 95% of the time, I get the monitor like that). It is with the 7130 model.

• Reference Dell place 11 Pro and 2 x U2412m

  Our company Installer

  -Dock revision A01.

  -A11 BIOS on a 7130

  -Driver 3496_A02

  -DP - DP Dell U2412m don't works

  -HDMI - DVI Dell U2412m works fine

  We also try active adapters, but it does not work too. With the DP to DP cable the U2412m is recognized by Windows 8.1 64 bit with other cables of nothing.

  Already talk to the Dell Support without any solution they told me it was a problem with the docking station you have version 1.0 of DP and our monitors 1.2 DP which does not. I don't want to believe this response. Sometimes, when I installed a different video driver 3 display will light for a few seconds, but after installation always the same problem. Hope the new driver brings the solution for us.

  -Daniel

  The only solution I found (to make V11Pro on docking station to work with U2412M on DP) is to downgrade the video driver version A00.

• Reference Dell 3007WFP-HC (renovated) and Dell AX510 Soundbar

  Hello

  I have an old refurbished Dell 3007WFP-HC. Ordered a Dell AX510 Soundbar which initially worked a little.
  When I turned the nob to turn on the light was dim half it delivered sound then just died.
  Doesn't replace and this time no light on when nob is turned on and no sound.
  So I guess that DOA?

  Could there be something wrong with my monitor and it 'Fries' sound bar?
  Or is that what these two or is not compatible?
  Or is it just bad luck and I should get the bar of his predecessor again.

  SoC

  Unknown. I've never heard of a bricking monitor a soundbar. I'm assuming that the AX510 is powered by being plugged on the 3007WFP-HC #2 power port (User Guide, page 3)? You should consider getting the AX510PA

  who uses its own AC adapter.

• Reference Dell Chromebook 11 - smoke and sparks?

  My chromebook suddenly stopped working and there was the smell of smoke, but also sparks produced by the keyboard. What can I do or where can I get help?

  If it is covered by a warranty?

  

  I suggest that you contact Technical Support in the link below:

  www.dell.com/.../Contact-Information

• Reference Dell R300 Xeon 3353 and ESXi 4?

  Hello

  I'm currently under ESXi 3.5 on a Dell R300 with CPU server 3353 everything works fine. I am considering the upgrade to ESXi 4 but I do not see in the HCL for support for the UC 3353 (only 54xx ones).

  Is there a reason for this? Does anyone have experience with 3353 R300 and ESXi 4?

  Thanks for your help,

  Rémi

  Don't worry, ESXi 4 will work fine.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Reference Dell Image Assist restore and capture the location of newspapers

  Does anyone know where the newspapers capture and restore?

  ImageAssist newspapers are in c:\windows\panther\dtri\logs.

  Of in the PE ImageAssist ignition key, they will be in memory - but can be captured. Read the following article.

  • Capture troubleshooting logs

• Reference Dell 790-case SSF: enough space to upgrade?

  Hello

  I want to buy a Dell 790 SSF opportunity. Excellent care for a little money and Cap.

  I wonder if there will be enough space to add a second hardrive and ad a game (GPU). The game doesn't have to be on the cutting edge. Just enough to play old games.

  There is no room for two 3.5-inch storage devices (I installed a pair more and less than 2.5 inches in my SFF), but it has provisions for a discrete video card.

• Reference Dell 6224 and 5448

  Hi team,

  I'm new dell switches - exposed to cisco switches. I am faced with new kinds of problems with these dell switches. Unable to provide a fix and fight for the last 5 days. Pls help me. Below is my script

  Two nw - 2.0 and 3.0 is required to be configured in VLAN, VLAN ID 2 and 3.

  VLAN 2 - 192.168.2.1

  VLAN 3 - 192.168.3.1

  N/W 2.0 and 3.0 N/W machinery will be shared 48-Port powerconnect switch 5448 DELL

  The routing part arrives at 6224 power connect - gateway for vlan 2 - 192.168.2.1 and bridge for VLANs 3 - 192.168.3.1

  The switch of two is ascending through fiber optic - spf port cable

  This is the configuration I did-

  5448 switch-

  database of VLAN

  VLAN 2, 3

  output

  interface vlan 2

  switchport access vlan 2

  GVRP enable

  Routing

  output

  interface vlan 3

  switchport access vlan 3

  GVRP enable

  Routing

  output

  interface ethernet 1/you/1

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  output

  interface ethernet 1/g1

  switchport access vlan 2

  GVRP enable

  output

  interface ethernet 1/g2

  switchport access vlan 3

  GVRP enable

  output

  Uplink port is TE1 (Layer 2) to XG2 (Layer 3)

  Reference Dell 6224 can connect

  Configure the terminal

  interface vlan 2

  no downtime

  IP 192.168.2.1 255.255.255.0

  Routing

  output

  interface vlan 3

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  Routing

  output

  interface ethernet 1/xg2

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  Computer with 192.168.2.100 / 24 GW 192.168.2.1 connected to layer 2 switch g1 - vlan 2

  When I ping 192.168.2.1 - accessible United Nations host destination

  Even the wise

  Computer with 192.168.3.100 / 24 GW 192.168.3.1 connected to layer 2 switch g1 - vlan 3

  When I ping 192.168.3.1 - accessible United Nations host destination

  Any thing that has missed out in the configuration part / all bad entries. I'm not sure now how to treat this. Pls help me and it is an urgent task for me

  Thank you

  With multiple VLANs, you need to use the general/Trunk mode. With the help of the info we have I made a diagram to help show the location of the switches and parameters on them. Obviously things can be different, such as PVID, IP address, VLAN ID etc are all customizable to your needs. But the page layout modes and the port will remain the same.

  

  STP will not fill the VLAN on the other switches. It's probably the GVRP feature it refers. With such a short race, it is more practical to manually add the VLAN. At least for the initial Setup, then once everything works enable GVRP to accommodate future expansion of VLAN.

  Hope this helps some.

• Reference Dell place 8 just out of warranty and dead now?

  Hello

  Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.

  I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14

  What a *.

  Reference Dell of mobile devices (phones) & tablets
  1-800-308-3355 24 / 7

  http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19