Reference Dell MD1200, H710 with R720XD

Similar Questions

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Reference Dell Replay Manager with Actifio or well Veeam?

  I'm not very familiar with SAN storage. The company that I work is currently evaluating a backup solution that will use two Dell Compellents. Currently, we have a HDS, but are considering buying another for a warm site. The citation for the second HDS includes two Dell Replay Manager instances. My understanding is that Dell Replay Manager allows you to take snapshots, which is obviously a good idea. We also assess Actifio and Veeam as backup solutions. Replay of Dell Manager is quite expensive, and I wonder if it's necessary even if we will use Veeam or Actifio for a backup solution.

  Any who would provide no indication as to why or why we would not, want to eliminate the Dell Replay Manager of our purchase IF we proceed to a real (Veeam or Actifio) backup solution?

  Or, it would be better to abandon the Veeam/Actifio and use Dell Replay Manager?

  Thank you!

  You cannot Replay Manager if you go with the Actifio solution.

  Actifio captures the data of the production gradually environment forever and creates virtual copies for multiple use cases (data protection, disaster, recovery testing, etc.).  This architecture combines the quick capture of data from a snapshot of redundancy of a real consistent backup, application.

  Replay Manager uses instant Compellent to enter data, that work very well, but use of space on the storage array, and they do not provide a redundant copy of data.  Also, it presents itself as an additional cost and is another tool, that must be managed.  Actifio solution can provide snapshots, backup and replication through a single user interface services without storing to copy the data on the production storage matrix (copy data virtualization).

  Some of the main benefits of using Actifio in your scenario would be:

  -Copy the data would not be stored on the Compellent production table.  Snapshots of storage array can store the point at best time your production storage capacity.  Design of Actifio is to delete copies of your production sets and eliminate tools point of backup, replication, snapshots, etc.

  -Do you have a truly independent and redundant backup.  Storage array snapshots do not provide protection against the Group failures, breakdowns of the Bay or Bay of storage RAID software problems.

  -Data could be kept for more long with of Actifio built in compression and dedup global

  -Instant access to virtual copies of the data from the system of Actifio

• (Redirected) Reference Dell chromebook 11 with Intel i3 chip

  Hello

  I need a new Chromebook low cost asap

  What will be the chromebook dell 11, with an Intel i3 chip, go on sale?

  How it will be in the United Kingdom?

  Why not buy the Acer (also cheap) 720 / 720 p instead?

  Hi redteddead,

  Follow this link for Dell Chromebook to the United Kingdom.

  http://www.Dell.com/UK/Business/p/Chromebook-11/PD?~SRD = true & sk = chromebook & scat = prod

• Reference Dell V515w compatibility with Mac Book Pro

  Is it possible to get the Dell software to make my V515w compatible with my Mac Book Pro? I want a WiFi instead of USB.

  SheelahMeyer,

  To be able to print, try the (Driver Mac) (another Mac driver Instructions and the drivers used) (Mac Os X 10.7 Lion driver) (Lexmark S300 - S400 Series)

  You will need to install the OCR of the disk of the printer program to digitize documents and pdf files

  Rick

• Reference Dell 2700W UPS with the abandoned battery status

  I have several devices UPS 2700W Dell with a network management card. Some of them are now showing State of battery abandoned in the web INTERFACE, but the status is ok. When multiple verification of the State through the Dell UPS tools is shown as the same as that on the rest abandoned situation web. What is going on?

  Hello jwillemsen

  The State indicates that the battery of that test was abandoned. I suggest that initiate you a self-test and let finish. Let me know if that turns OK status.

  Thank you

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Reference Dell place 11 Pro - Dell Netready (HSPA +) with O2 sim card

  Hello everyone

  I would buy a Dell coming Pro 11 but it is essential for me, the presence of a cellular modem (3G / HSPA +) to connect whenever I want, without a wireless point.

  The Italian Web site Dell offers two solutions: one "for businesses" with a wireless Dell 5570E network (3G / HSPA +) cellular modem and the other "for the home" with a Dell Netready (HSPA +) with cellular modem (model CNV1M02) O2 sim card. Since I'm a soldier without VAT, I don't think I could buy the solution for companies (am I?), so I have to buy the one with O2 sim card.

  What I would like to ask is:

  (1) what is the difference between the two cellular modem? They have different performance?

  (2) if I buy the one with O2 sim card, I will be able to use the cellular modem with a different sim card (O2 is quite exspensive) or is the SIM blocked somehow (hardware or software)?

  Thank you very much

  Best regards

  There is no difference between Dell Netready with sim card O2 and Dell Wireless 5570E. Tablet using 5570E HSPA + / 3 G modem and it did not all simlock. I ordered V11 Atom with Dell Netready, and now I use with several mobile internet providers (Poland).

• Reference DELL Blade - Ethernet Passthrough with ESX 4

  I have an environment DELL M1000e blade with M610 and M710 servers.  Running all ESX 4.

  Fabric A1: M6220 (the user's LAN Segment)

  Fabric A2: no

  Fabric B1: Ethernet Passthrough (iSCSI to DELL Equallogic PS5000e SAN)

  Fabric B2: Ethernet Passthrough (iSCSI to DELL Equallogic PS5000e SAN)

  All blade on ESX servers see the A1 and A2 as vmnic0 & vmnic1.  If I understand correctly, the M6220.  The problem is that none of the blades see Passthroughs Ethernet which are connected to a Cisco 2970 switch.  Shouldn't B1 & B2 appear on vmnic2 & vmnic3?  It does not show on the side of ESX.

  Any agency with experience with this would be useful.

  Thanks in advance.

  (1) chassis management controller can tell you what is installed.

  (2) Yes, you do.  If you want to connect to what in fabric B, each server needs to connect to fabric B need a Mezz card on fabric B.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• Dell Inspiron 1525 with Vista Home Version gets stuck and won't end up task - is to turn it off and restart.

  I have a Dell Inspiron 1525 with Vista Home Version that was working fine until recently. Now, whenever I try to open a file or use whatever it is, it seems stuck with the ROAR - once an hourglass on the old computer - and nothing happens. The only way I can get out of everything I tried to do is to turn off and restart. Next, I get the message that he has was not shut down normally, etc., and it takes forever to get up. Then the whole again. I really want to this time just download all my files on an external hard drive so I can get a new computer, but it will not let me even copy / paste a single file without getting bogged down. Control Alt Delete even let me get into the Task Manager to stop the programme of work. Please help me.

  Hi MZ1_6789,

  ·         What is the exact error message?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Make sure that all windows updates are installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Reference: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.

• Reference Dell 3110cn of Laserjet + os El Capitan

  My MacBook Pro (2009) stopped my Dell printer. News on this please.

  Hi deaconjo,

  as I had the same problem, I found a solution for my El Capitan MacPro 2008:

  Search for the following installation program:

  3130cn_Installer_And_Application_Dell_A04_MAC.dmg

  Inside this package you will find the driver for 10.7 and higher. After installing the package I could add an IP printer with this driver:

  Reference Dell 3130cn Color Laser v3017.104 PS

  With this driver installed, I can use my printer Dell 3110cn without problem.

  Perhaps it might help you too.

  Concerning