Reference Dell Open manage for PE2950 for WS2012R2

Similar Questions

• Foglight and Dell Open Manager Application to monitor temperatures

  I would like to know how I would be able to use Foglight to monitor Dell servers.

  For example I'd like to monitor the temperature. These servers have Dell Open Manager installed on then. Can use/get Foglight all alerts to Dell Open manager?

  You can use the SNMP integration to monitor traps HW via Foglight.  Check out this post for a primer http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19552981.aspx

• Dell Open Manage - application compatibility

  Hello

  First post here. I work for a large company and I am the 'rookie' of the service infrastructure. The company I represent have about 500 sites which about 85% have installed Dell Power Edge 310 servers. We seek to deploy Dell Open manage through the estate to monitor the performance of the server etc etc. I had to know if we could use it on other server brands, such as Fujitsu, HP and IBM.  In our data center, we use HP servers.

  So my question is could we use Dell manage open on other servers from manufacturers? And we could use it with the ILO? I know other programs of management software for the likes of HP etc etc, but as you can see I am, to say the least, a bit out of my depth.

  Any help/advice/guidance would be greatly appreciated.

  Thanks in advance.

  No, OMSA works on Dell supported running OS servers.  In other words, that it will work on:

  • non-Dell servers
  • If other computers (including Dell)
  • Servers not made Dell supported operating systems (client OS (XP, V, 7, 8), including the lack of Service Packs)

• failure to update bundle Dell Open manage offline after the ESXi 4.0 upgrade to ESXi 4.1

  Hi all

  My service manage Open Dell failed on my Dell Power Edge Server after the upgrade to ESXi 4.0 to ESXi 4.1. I know that I need to update the bundle off line Dell manage open to a newer version to run on ESXi 4.1. However, everything I did on updating bundle Dell Open manage, it just gave me the below error:

  C:\temp\2 > "c:\Program Files (x 86) \VMware\VMware vSphere CLI\bin\vihostupdate.pl"-Server 172.16.3.28-i b OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX40i_A00.9.zip

  Enter the user name: root

  Enter the password:

  Please wait install the fix is underway...

  No ballots or VIB were found in the metadata. No bulletin for this dish

  form could be found. Nothing to do.

  I know that the command is correct I can install correctly the Bundle open offline manage a FRESH ESXI 4.1 Installation on a test server. However, I do not want to and cannot start early on my production server. An idea to work around this problem is especially welcome!

  There is an another vib for ESXi 4.1.  Try to install OMSA go http://ftp.dell.com/sysman/OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX41i_A00.8.zip.

• Reference Dell Custom Image for Vmware ESXi 5.1

  Hello

  where can I find the custom image Dell for ESXi 5.1.

  I can only find the ISO Images for 5.0 (4.1). But none for 5.1. Unfortunately the original ISO Vmware image will not work because it does not find a NETWORK card in my Dell R420. Which seems to occur as long as the original image from Vmware does not include the card driver NETWORK Dell to the R420.

  I saw that today there is a download section at support.Dell.com for ESXi 5.1 with about 36 files to download. But no ISO Image for ESXi 5.1 as it is 5.0 and before.

  Hope someone can help or knows how Dell will bring the custom image.

  Thank you!

  Here is the link to the ISO image of the ESXi 5.1 custom newly released Dell. Sorry for the delay to everyone - out www.dell.com/.../poweredge-r620

• Reference DELL demanding $80 for a share of $5.90

  Laptop Inspiron 5758 bought April 2015, had the power switch replaced under premium support Oct - 15, 2 days after the end of my premium (to July 19) support switch has not yet. Card replacement (of the power T2CVC button) costs between $5.90 and $15, but is out of stock on every site I can find. Reference DELL tell me or send my laptop to be fixed @ $169, either to buy the small Board that DELL has a monopoly on cost me $85 (Anurag Srivasava3 July 21, 12 h 50 HE)

  This is outrageous, this is a new laptop and I expect at least Council (oct-2015) replacement work would be covered or DELL would have at least the care that I have a computer DELL with a hardware fault rather enjoy my situation and make huge profits that they would send me a part at normal price.

  Check out this link.

  Dell Inspiron 17 (5755 / 5758) power of button with cable - T2CVC

  They can notify you when it's back in stock...

• Reference Dell Replay Manager with Actifio or well Veeam?

  I'm not very familiar with SAN storage. The company that I work is currently evaluating a backup solution that will use two Dell Compellents. Currently, we have a HDS, but are considering buying another for a warm site. The citation for the second HDS includes two Dell Replay Manager instances. My understanding is that Dell Replay Manager allows you to take snapshots, which is obviously a good idea. We also assess Actifio and Veeam as backup solutions. Replay of Dell Manager is quite expensive, and I wonder if it's necessary even if we will use Veeam or Actifio for a backup solution.

  Any who would provide no indication as to why or why we would not, want to eliminate the Dell Replay Manager of our purchase IF we proceed to a real (Veeam or Actifio) backup solution?

  Or, it would be better to abandon the Veeam/Actifio and use Dell Replay Manager?

  Thank you!

  You cannot Replay Manager if you go with the Actifio solution.

  Actifio captures the data of the production gradually environment forever and creates virtual copies for multiple use cases (data protection, disaster, recovery testing, etc.).  This architecture combines the quick capture of data from a snapshot of redundancy of a real consistent backup, application.

  Replay Manager uses instant Compellent to enter data, that work very well, but use of space on the storage array, and they do not provide a redundant copy of data.  Also, it presents itself as an additional cost and is another tool, that must be managed.  Actifio solution can provide snapshots, backup and replication through a single user interface services without storing to copy the data on the production storage matrix (copy data virtualization).

  Some of the main benefits of using Actifio in your scenario would be:

  -Copy the data would not be stored on the Compellent production table.  Snapshots of storage array can store the point at best time your production storage capacity.  Design of Actifio is to delete copies of your production sets and eliminate tools point of backup, replication, snapshots, etc.

  -Do you have a truly independent and redundant backup.  Storage array snapshots do not provide protection against the Group failures, breakdowns of the Bay or Bay of storage RAID software problems.

  -Data could be kept for more long with of Actifio built in compression and dedup global

  -Instant access to virtual copies of the data from the system of Actifio

• Reference Dell Desktop-replacement for Nvidia GeForce GTS 240 graphics card

  Nice day. I hope an expert can help me.

  My computer: Desktop computer Studio XPS 8100 Dell, intel Core i7 870 2.93 GHz, 8 MB, etc.
  Graphics card: NVIDIA GeForce GTS 240 single memory 1 GB. Reading, not sold at retail and is now no longer available.
  Unit of power: 350 Watt maximum.

  I do not use the computer to play games.

  For various reasons, you can Please provide DETAILS for me a graphics card in replacement of approximately the same 'power' +. I can myself, slot load driver and be operational. Don't not changing other pieces (I hope) and there seems to be so many available graphics cards.

  I hope for the purchase of the graphics card via Internet, British supplier and then abroad for me.

  In the meantime, thank you for your help.

  Leonard

  Hi Skanter - just saw this message-hope it comes in time

  I had this problem with mine - it was also to achieve 90degC. It is caused by a really poorly designed cooling system - the fins of the radiator are locked behind a metal shield and the fan blows into it.

  What you need to do is: -.

  (1) turn off and unplug everything from the PC

  (2) open the side panel and disconnect the audio cables and power of GPU

  (3) remove the mobo

  (4) with the help of a tiny posidrive screwdriver, unscrew the thin metal cover of heat sink

  (5) use a brush to remove all the dirt you may see! DO NOT BLOW IT OUT WITH YOUR BREATH!

  (6) reassemble and hopefully enjoy the silence!

  If you still get the noise the chances are some dust penetrated fan (this happened to me when I used compressed air to blow the heat sink). Replacement fans are as rare as horse poop to switch I could not even one of the original manufacturer (path to the bottom of the chain - don't expect any help from Dell or nVidia here, I'm afraid) but are thankfully easy to fix.

  GTS 240 fan fix: -.

  I do memory-sorry if I get something slightly wrong!

  (1) remove a map as shown above. Once the radiator fan cover will be exposed.

  (2) very gently, using a pair of small screwdrivers hanging under the blower rotor, gently lift the rotor clear of the case. He doesn't want to go at first, but be patient and try and apply steady pressure on each side.

  3) out of the bearing once clean any muck-it only takes a small amount here because of the noise.

  4) applied with a headset, a tiny (and I mean tiny) bit of WD40 (don't know what this is called in the United States-but it's a wonder spray!) for the bearing

  (5) wipe off - you'll need that the strict residue on the tree

  (6) reassemble and get started!

  If you are worried about prising off the rotor (or indeed I was wrong) you can undo the radiator all of PCB by unscrewing the screws with springs on them - this allows access to the screw bit to hold the fan. Then you can cancel these abd slide the cable out which means that you can clean the bottom - but the rotor must always be removed to lubricate the bearings.

  Good luck

  Nick

• VMA 5.0 install Dell open manage

  Hi all

  I try to install OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip on my ESX with vSphere Management Assistant, and I have the following error:

  VI-admin@localhost:~ > esxcli - Server ESX_IP software install d OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02 vib.
  Enter the user name: root
  Enter the password:
  [MetadataDownloadError]
  Unable to download zip:/var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip?index.xml deposit, skippi index.xml /var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip: [Errno 2] no such file or directory: '
  URL = zip:/var/log/vmware/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip?index.xml
  Please see the log file for more details.

  can someone help me?

  Thank you.

  Try following the steps below.

  1. log in at the VMAs with privileges and the administrator rights.
  2. copy the file OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip in the folder/var/log/vmware on the server ESXi5.0.
  3. turn off all comments on the ESXi host operating systems and run the ESXi host in maintenance mode.
  4. in vMA, run the following command:
  esxcli - Server software vib install d/var/log/vmware /
  5. type the username root and the password of the ESXi host when you are prompted. The output of the command shows a successful update.
  6. restart the ESXi host system.

  Ref (http://support.dell.com/support/edocs/software/svradmin/65_02/ESXi_ts/esxi5_ts.pdf)

• Reference Dell Enterprise Manager

  Does anyone know where the company dell nursery software can be downloaded from?

  If you have already installed a data collector and looking to the Compellent Enterprise Manager Client, you can get it by browsing to https://ipaddressorhostnameofdatacollector: 3033

• Reference Dell Client Manager (DCM) versus OpenManage Client Instrumentation (OMCI)

  We have 7 PowerEdge servers and about 70 Dell Optiplex SX280 mainly, SX755

  I'm still confused with different management software.

  What is different between the DCM and OMCI?

  Can they work together and why should I do it?

  Why should I use Altiris (and pay) instead of DELL ITA?

  Thank you very much

  
  

• Reference Dell secure Manager

  Hello everyone, I bought a laptop a person, was all fine I was used at a time, now, I put a password and is not recoznige in secure dell Manager, this laptop was purchased from a friend of the Spain, that in my view, that has been activated the old password on the former owner, can someone help me to unlock my phone?

  Hi, the name of the model is DeLL Latitude E5410, with service NOTE from the ADMINtag: maintain the label removed by privacy policy >, I bought from a friend who is in business with Spain laptop, my laptop is a Spanish model, it was worked fine but I flashed the bios A07 A10, then the A10 to A13 After I have made some changes in my bios to Aureano, and I put a password on HDD and a password system, was not let put me an admin password, I guess that was configured by the former owner, then I was give restart and appears to me DeLL Data Secure Manager and it doesn't recognize my password because the Admin password was not me , so if there is a solution to this problem, I'll be greatfull, and how can I check if this laptop was stolen not? I don't want a stolen thing. And I can't connect to windows, after I typed the password 3 times wrong my phone is clogging decline. Thank you in advance.

• Dell Open manage Essentials shows a wrong server instead

  Hello

  We have OME installed 2.0.1 and configured on a server 2012 r2 VM, it's work will be much more than 32 servers discovered and inventoried properly under OME.

  Please help solve the question below:

  -We have added a server (say it as server A) with IP address: 192.168.1.92, it came very well, but when we checked the details of the inventoried server it shows his name as Server B (which is another server on the network and already been added in the menu inventory OME) under Details on server A, it is also show the ip addresses of server B as well as the IP address of server A to the address mentioned above

  Hello

  These server A and B have the same host name or DNS name? You can check by doing a nslookup or ping - a both IP addresses?

• Download Open manage Essentials V1.1

  Hello

  Anyone know where I can download Dell Open manage Essentials version 1.1?  I tried to download it from the following link but it constantly fails, application seems to be corrupted.

  https://marketing.Dell.com/DTC/OME-software

  I searched on the web and this seems to be a common problem.

  Kind regards

  Stavros08

  Hello, Stavros,

  Try to download from this site using these credentials: http://dtxdropbox.dell.com

  Login name: ome1_1

  Password: lfsxkffq

  Kind regards

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102