Reformat the result Table data

Similar Questions

• Refresh the result table or rerun the query

  I have a requirement, simple but stuck somewhere.

  Jdev 11.1.1.17 Expert level: Mid-Senior

  I have a form of application and the associated result table. It works great and no problems.

  My requirement is that I have a commandlink on one of the column. Clicking on that will open a popup with an editable filed. OK will commit and Cancel will close the pop-up window.

  After that the popup is dismissed with partial trigger, my table refreshes but data is identical to the front. But if I click the Find (Search) button on the query, it shows the data with the results updated which are changed in the pop-up window above.

  How do I update table which re - runs the query and then refreshes the table after the popup is dismissed, or when the user clicks the OK button in the pop-up window.

  Get on the viewObject of this table and call the executeQuery method that

  Write this method in the method AMImpl and then call it in bean managed using the OperationBinding at the click on the Ok button of the dialog box

  ViewObject vo = this.getViewObjectName ();

  vo.executeQuery ();

  Ashish

• Cannot sort the results table using datetime attribute

  I use short 3.1. My result table disappears when I try to sort by using a date/time attribute. I also saw him sometimes throw me an error: in ORDER BY clause: ORDER BY clauses may refer only to the attributes set in the same statement. I don't have any problem sorting the same point of view on a list of result of the datetime attribute. What could be wrong?

  I installed the provided patch support of oracle and it works. My studio version was 3.1.14220. After connection, the version is 3.1.18915.

• In the results pane date formats

  I am troubleshooting a data corruption issue, and I need to see year-round in the developer sql results pane. When I issue a select statement on a table dates in the format DD-MON-AA results pane. Is there a way to display dates in the format DD/MM/YYYY.

  Hello

  You who control with tools | Preferences | Database | NLS | Date format. Alternatively, a spreadsheet on your connection, just run

  ALTER session set nls_date_format = "DD/MM/YYYY";

  The alter session actually overrides the preference setting and applies to all spreadsheets shared for the connection and also includes the results of the data object browser tab.

  Kind regards
  Gary Graham
  SQL development team

• Help Removeing all the commas of the results table.

  Good afternoon al,.

  I'm pretty new on Oracle SQL developer and need a little help to find the best way to replace all commas in a table of results with ' > '.

  I run a select statement:

  SELECT

  WHERECLAUSEVALUE

  Of

  FDM_SAB. TDATAMAP

  ORDER BY WHERECLAUSEVALUE ASC

  To produce a very simple table with 1 column. (see bleow):

  *

  *

  *

  *

  00000,50000

  00000,50000

  00000,50000

  00000,50000

  00000,50000

  00000,50000

  As you can see some of the results contains a comma then a space, I'm looking to replace the "," (comma and space) with ' > ' (greater-than sign in). I guess this is done at a point with the function replace but have had no luck so far.

  Any help would be greatly appreciated. Thank you very much

  
  Charlie

  P.S. I'm new to this forum and this is my first post here; I apologize if my question is not clear or I don't give enough information.

  Replace (columnname, ',' > ')

  Should work for you.

  If this isn't the case, please post what you've tried and show the results you get.

• The ADF Table data validation and highlighting

  I have an ADF table, supported by a VO. Gets the data loaded from a spreadsheet file. There are some required columns marked with the required attribute. the columns do not get highlighted when loaded data are empty. How can I get auto table validated during the loading of data and WITHOUT a commit / submit to the rear end table?

  My requirement is.

  1 load the data into the table.

  2. a way to highlight the rows or columns that have no values (how?) I tried the style inline for column as #{row.bindings.invamt == null?' background-color: Red;': ' background-color: White;'}, but no luck.

  3. validate data from db.

  User, tell us your version of jdev, please!

  If the table is editable, you can add this to the inputText of the column

  contentStyle = ' #{empty row.bindings.PhoneNumber.inputValue?» "{- color: red;':"} ".

  For the PhoneNumber column. If the table is read only the cellular connection is

  973564 wrote:

  I have an ADF table, supported by a VO. Gets the data loaded from a spreadsheet file. There are some required columns marked with the required attribute. the columns do not get highlighted when loaded data are empty. How can I get auto table validated during the loading of data and WITHOUT a commit / submit to the rear end table?

  My requirement is.

  1 load the data into the table.

  2. a way to highlight the rows or columns that have no values (how?) I tried the style inline for column as #{row.bindings.invamt == null?' background-color: Red;': ' background-color: White;'}, but no luck.

  3. validate data from db.

  contentStyle = ' #{blank line.» Phone number? "{- color: red;':"} ".

  So I guess that the connection you are using is not correct.

  

  Timo

• A search criterion and the result as a table in the header. Wanted to bind the result table to bean to access the value of the key

  The search criteria and the result is displayed in the table in a group header.  I want to get the value of the selected row and analyze the value of Vo in the next page for a variable binding. So I need to manage the value biniding to the bean tbal, but there is no option to bind the table to a bean. So, how can I get the selected value.

  Kind regards

  K M Krishna.

  First tell us your version of jdev, please.

  to get to the selected line you need not to link the table to a managed bean. You can for example drag the necessary attributes of the VO on the page and drop them as components of a inputText. the framework then generated the attribute bindings and sets the values of the current row for them. As you do not really need the inputText elements switch to source view (! it is essential!), then remove them. This will eliminate the Visual component, but attribute bindings are stored.

  Know you can access the values through their EL or as you get the value of an attribute via it's mandatory.

  Timo

• Restore the partition table data

  Hello
  
  
  DB 10.2.0.1
  
  I have a dump file in which exported the data from a table to a database. This table is based partioned. I have imported into the database B. I have truncated or tried successively to the partition of the table in database B now I want to import the data from the export dump file in the same table. I don't want to import the data again for all partitions. I want to just import only truncated how data I could do?
  
  Thank you

  Hello

  Even I did as you say, but we give below error.

  In fact, it is not an error message:

  Import completed successfully without warnings.

  You have SQL code contained in the "dump":

  CREATE TABLE 'TRADING_TEST' ("BRAND_DESCRIPTION' VARCHAR2 (120)...)

  For example, you may notice that importation will try to recreate the Table of TRADING_TEST with all its partitions. Of course, it will generate an error and you will not be able to import the data in the Partition. Unless you have just TRUNCATE and you use the parameter IGNORE = Y.

  So, if you TRUNCATE the Partition you do not have to recreate.

  If you DROP the Partition, it is best to recreate first (ALTER TABLE ADD PARTITION...).

  Then import you the datas like that (I just add IGNORE and LOG settings):

  imp system/password file=C:\exportTable32\table.dmp FROMUSER=dev touser=system tables=(TRADING_TEST:A15) ignore=y log=C:\exportTable32\table.log
  

  However, I hope that it is just for test purpose, because it is not recommended to create the user Tables in the SYSTEM.

  Hope this helps.
  Best regards
  Jean Valentine

• XML from the Oracle Table data

  Hi all
  
  I'm new to this network. I'm also new to oracle XML package. I want a help with the query below.
  
  CREATE TABLE EMP (ID NUMBER PRIMARY KEY, NAME VARCHAR2 (10), TELEPHONE NUMBER);
  
  INSERT INTO EMP (ID, NAME, PHONE) VALUES (11, 'Joy', 1234);
  INSERT INTO EMP (ID, NAME, PHONE) VALUES (22, 'Mike', 5678).
  INSERT INTO EMP (ID, NAME, PHONE) VALUES (33, "Jason", NULL);
  COMMIT;
  
  I want to export data from the EMP table in an XML file with the format below.
  
  Power required:
  
  <? XML version = "1.0" encoding = "UTF-8"? > < Joy STATICDATA > < EMP > < ID > 11 < /ID > < NAME > < / NAME > < / EMP > < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? > < Mike STATICDATA > < EMP > < ID > 22 < /ID > < NAME > < / NAME > < / EMP > < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? > < Jason STATICDATA > < EMP > < ID > 33 < /ID > < NAME > < / NAME > < / EMP > < / STATICDATA >
  
  I used some XML functions and you wrote the following query.
  
  Select XMLROOT (XMLELEMENT (staticdata, XMLELEMENT (EMP, XMLELEMENT(ID,ID), XMLELEMENT(NAME,NAME))), version "1.0" encoding = "UTF - 8') xml EMP;
  
  my query output:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < STATICDATA >
  < EMP >
  < ID > 11 / < ID >
  Joy of < NAME > < / NAME >
  < / EMP >
  < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? >
  < STATICDATA >
  < EMP >
  < ID > 22 / < ID >
  < NAME > Mike < / NAME >
  < / EMP >
  < / STATICDATA >
  <? XML version = "1.0" encoding = "UTF-8"? >
  < STATICDATA >
  < EMP >
  < ID > 33 / < ID >
  Jason < NAME > < / NAME >
  < / EMP >
  < / STATICDATA >
  
  
  But I want the out as the power required above. all records in a single line. can someone help me achieve the desired output. also can I export all columns of the table with something like select * from the table in the XML file?
  
  Thank you
  Delobelle

  Don't know why you need it on a single line, but you could:

  Select XMLTYPE (REGEXP_REPLACE (XMLROOT (XMLELEMENT (staticdata, XMLELEMENT (EMP, XMLELEMENT(ID,ID), XMLELEMENT(NAME,NAME))), version "1.0" encoding = "UTF - 8'), CHR (10) |)) ' *<><'))>
  FROM EMP;

  SY.

• XML document to the oracle tables - data isn't fatching

  Hello
  I'm new to xml and trying to extract some fields of XML to oracle to use more in the application tables. I wrote the following to extract the values, but nothing is fatching document:
  
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  -dmsgo:DMS_GO_Interface xmlns:dmsgo = "https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1 DMS_GO_Interface_v1.xsd" >
  < dmsgo:majorversion > 1 < / dmsgo:majorversion >
  < dmsgo:identity context = datetimecreated "CONFGOFR_OUT" = "03/01/2011 10:51 ' source = 'go' sourceversion ="1.410.1"/ >"
  -< dmsgo:prospect >
  < code dmsgo:requestresponse = "0" / >
  < dmsgo:references / >
  -dmsgo:configurationcontext dataversion = LangueCode "2163" = "" orderingmarket = '867' saleslevel "O" = >
  < dmsgo:configurationdate > 03/01/2011 < / dmsgo:configurationdate >
  < / dmsgo:configurationcontext >
  -< dmsgo:vehicle >
  < dmsgo: variant baumuster = "2120482" manufacturercode = "2120482" / >
  < dmsgo:desc > E 200 CGI BlueEFFICIENCY sedan RHD < / dmsgo:desc >
  -< dmsgo:colorcombination >
  < dmsgo:interiorcolor codeowner = 'C' manufacturercode = "4201" = ppmtype "to THE" > black leather < / dmsgo:interiorcolor >
  < dmsgo:exteriorcolor = 'C' manufacturercode codeowner = "2497" ppmtype "READ" = > metal Brown corrosion < / dmsgo:exteriorcolor >
  < dmsgo:paintzone manufacturercode = "" preference = "2" / > "
  < / dmsgo:colorcombination >
  
  
  INSERT INTO p1 (flux_name, elment_1, elment_2, elment_3)
  SELECT flux_name, elment_1, elment_2, elment_3
  FROM XMLTable)
  XMLNamespaces ('https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1' as 'dmsgo'),
  "dmsgo:DMS_GO_Interface/perspective/vehicle.
  passage xmltype (bfilename('DMLDIR','prospect.xml'), nls_charset_id ('CHAR_CS'))
  columns
  path of varchar2 (20) flux_name "dmsgo:variant/@baumuster"
  path of varchar2 (20) elment_1 "dmsgo:desc"
  path of varchar2 (20) elment_2 ' dmsgo:colorcombination / interiorcolor',
  path of varchar2 (20) elment_3 'dmsgo:colorcombination/interiorcolor/@manufacturercode '.
  );
  
  Help, please.
  
  Looking forward to early response.
  
  Thank you
  Usman

  Hello

  'Re missing you the prefix to namespace on elements.
  This should work:

  SQL> SELECT flux_name, elment_1, elment_2, elment_3
    2  FROM XMLTable(
    3    XMLNamespaces ('https://globalordering.daimler.com/start/dms/interface/DMS_GO_Interface/v1' as "dmsgo"),
    4    'dmsgo:DMS_GO_Interface/dmsgo:prospect/dmsgo:vehicle'
    5    passing xmltype(bfilename('DMLDIR','prospect.xml'), nls_charset_id('CHAR_CS'))
    6    columns
    7      flux_name varchar2(20) path 'dmsgo:variant/@baumuster',
    8      elment_1  varchar2(40) path 'dmsgo:desc',
    9      elment_2  varchar2(20) path 'dmsgo:colorcombination/dmsgo:interiorcolor',
   10      elment_3  varchar2(20) path 'dmsgo:colorcombination/dmsgo:interiorcolor/@manufacturercode'
   11  );
  
  FLUX_NAME            ELMENT_1                                 ELMENT_2             ELMENT_3
  -------------------- ---------------------------------------- -------------------- --------------------
  2120482              E 200 CGI BlueEFFICIENCY Sedan RHD       Leather black        4201
   
  

• Problem, out the second table based on ID in the first table data

  Hi everyone: I was stuck for a few days to a few questions. And here's one:
  
  I have a table of COURSE. I also have a summary of COURSES which displays all courses and related information page.
  
  When a user clicks on a specific course he will lead them to a page of details for this specific courses. PROBLEM: Everything works well except: I have a separate table that contains information of teachers. The two tables are related by The Primary Key (PERSONNEL_ID) in the table of teachers (called PERSONNEL_LISTS) and MT_ID in the COURSES TABLE. I don't want the MT_ID to be displayed on the details page: I have teachers want first and last name.
  
  
  
  Here are two tables:
  
  http://www.coolflasher.com/Courses_table.gif
  
  http://www.coolflasher.com/Personnel_table.gif
  
  The SQL that is currently used on the course detail page is:
  
  < name cfparam = "URL. Default COURSE_ID"="-1 ">".
  < name cfparam = default 'URL_COURSE_ID' = '#URL. COURSE_ID #">"
  < cfparam name = default 'SESSION._Insert_COURSES' '-1' = >
  < name cfquery = "CLASS" datasource = "SCHEDULING_TRACKER" >
  SELECT *.
  COURSES
  WHERE COURSE_ID = < cfqueryparam value = '#URL. "COURSE_ID #" cfsqltype = "cf_sql_numeric" > OR (-1 = < cfqueryparam value = "" #URL_COURSE_ID # "cfsqltype ="cf_sql_numeric"> AND COURSE_ID = < cfqueryparam value =" #SESSION._Insert_COURSES # "cfsqltype ="cf_sql_numeric">")
  < / cfquery >
  
  And I'm out of the MT_Code: cfoutput > #COURSES.MT_ID # < / cfoutput >
  
  I tried to add the table PERSONNEL_LISTS of the request, but I can't figure how to get it out of the column FIRST_NAME and LAST_NAME that correspond with the MT_ID in the table of COURSE. Table of courses

  Do not use select *.

  The two most common ways to join the tables are:

  FROM table1 join table2 on table1.somefield = table2.somefield
  and
  FROM table1, table2
  where table1.somefield = table2.somefield

  Your code example doesn't have.

• Loading XML into the relational Table data

  Hello

  I get a generated XML file to other tools (Windows), I am trying to create a Linux shell script that will gather the necessary XML file to my Linux server, then ask Oracle to use this file to load the XML data into a relational table. This activity and the data will be needed on an ongoing basis.

  I tried two ways. First, I loaded the XML document into the database and tried to extract the data directly from the document, but it does not work. Now I want to try to read the data directly from the file on the server through select, however I don't get all the returned data. In the Select statement below, I am trying to query the data to see what is returned for my tests.

  Create Table ci_results_table (transactionID Varchar2 (100), //transactionID should be PrimaryKey but became errors in test of insert, PK so deleted NULL value)

  message Varchar2 (200),

  This Varchar2 (50).

  XMLType of the ProcessedDate,

  status Varchar2 (50).

  sourceFile VarChar2 (100));

  Select x.*

  from XMLTable)

  ' TSPLoadResults/results '.

  PASSAGE xmltype (bfilename('CMDB_DEVADHOCRESULTS_DIR','LoadResults-HP_146.results.xml'), nls_charset_id ('AL32UTF8'))

  COLUMNS

  transactionID PATH Varchar2 (100) 'TransactionID '.

  Result XMLType PATH 'result ',.

  Message Varchar2 (200) PATH "Message."

  PrimaryKey Varchar2 (50) PATH "PrimaryKey"

  Date of ProcessedDate path "ProcessedDate."

  Status Varchar2 (50) PATH "Status."

  SourceFile VarChar2 (100) PATH "SourceFileName.

  ) x

  ;

  Eventually, I'll have to build on that to limit the returned data to records where SourceFileName is like '% PA' and insert what is returned in to the ci_results_table. Attached is an example of the XML results file I am trying to load, it is named "ResultsTransformedtoUnix" because I used dos2Unix to convert Unix which can be good or bad. (I send the output file must be converted to the format BACK until the other application can read). Original (before converting Unix) file named in the script is also attached.

  Help, please. Thank you!

  Hello

  I see some bad things in your query.

  (1) obvious one, explaining why you get all the data: there is a typing error in the XQuery expression, there 'result' not'slead.

  (2) ProcessedDate can be extracted as a date (at least not directly) because it actually represents a timestamp, use the TIMESTAMP WITH time ZONE HOURS and cast back to DATE data type in the SELECT clause

  (3) transactionID is an attribute, it must be accessible with ' @' (or ' attribute:' axis)

  (4) if the encoding of file really is ISO-8859-1 as suggested in the prologue, then do not use AL32UTF8 but the name of the corresponding character set: WE8ISO8859P1

  Here is the query to work:

  select x.transactionID
       , x.Message
       , x.Primarykey
       , cast(x.ProcessedDate as date) ProcessDate
       , x.Status
       , x.SourceFile
  from XMLTable(
         '/TSPLoadResults/Result'
         PASSING xmltype(bfilename('XML_DIR','LoadResults-HP_146.results.xml'), nls_charset_id('WE8ISO8859P1'))
         COLUMNS
           transactionID Varchar2(100)            PATH '@transactionID',
           Message       Varchar2(200)            PATH 'Message',
           PrimaryKey    Varchar2(50)             PATH 'PrimaryKey',
           ProcessedDate timestamp with time zone PATH 'ProcessedDate',
           Status        Varchar2(50)             PATH 'Status',
           SourceFile    VarChar2(100)            PATH 'SourceFileName'
       ) x
  ;
  

  Directly on the file using this query will only be decently (for large files) on 11.2.0.4 and beyond.

  On older versions, first load the file into a (temporary) XMLType column with binary XML storage and CHOOSE from there.

  because I used dos2Unix to convert Unix which can be good or bad.

  This conversion should not be necessary.

• ctx_doc. Highlight - type offset column in the resulting table?

  Hi all
  
  I'm trying to get the piece highlighted document, that contains the my search term.
  I guess that this column offset in the table of results of ctx_doc.highlight contains the starting position of the search term in my document from count of 1.
  Problem is that when I try to get this piece of text like this
  

  DBMS_LOB.READ (HIGHLIGHTEDDOC, ammount, offset, chunkofdoc);

  I get a piece which does not contain search term... is not even near the part of the document that contains the search term.
  When I get the document highlighted, correct terms are highlighted, but there is a problem when documents are large and have more than 1,000 pages.
  So I guess the idea is to get only the parts of the document that contain search terms.
  
  1. What is offset column numbers? characters with spaces, bytes, or something else?
  
  2. is there another way to get only the segment of the document that contains the search term?
  
  Thanks in advance,
  Alexandar

  Hi Alexander,.

  I see you are using to the highest point in CLEAR = false, but with the filter you use PLAINTEXT = true. The tripping I have not the opportunity to test, but I think that this will lead to different documents, so the highlight offset will be on another version of the document. So could you try what this will do, if you set both the same.

  Herald tiomela
  http://htendam.WordPress.com

• By using the query table data pump

  I am trying to perform an export of data pump on a table by using a query in a parfile and I'm getting a strange behavior. The database version is 10.2.0.4.3 and the AIX 5.3 operating system. The query looks like this.
  
  QUERY = "POSDECLARATIONQUEUE:where SESSIONID in (select"B.SESSIONID"from POSACCOUNT A, POSDECLARATIONQUEUE B, POSDECLARATIONSESSION C, where"B.SESSIONID"="C.ID"and"C.ACCOUNTID"= 'A.ID' and 'Inform' = '10252')" "
  
  This works, but gets 0 rows. If I run the query against the instance in a session of SQLPlus as below then I get 0 rows returned.
  
  Select * from POSDECLARATIONQUEUE where SESSIONID in (select "B.SESSIONID" from POSACCOUNT A, POSDECLARATIONQUEUE B, POSDECLARATIONSESSION C, where "B.SESSIONID" = "C.ID" AND "C.ACCOUNTID" = 'A.ID' and 'Inform' = '10252');
  
  If I take the columns all about apostrophes in the query on the Forum with SQLPlus, I get over 2000 rows returned.
  
  SQL > select count (*) in the POSDECLARATIONQUEUE where SESSIONID in (select B.SESSIONID from POSACCOUNT A, POSDECLARATIONQUEUE B, POSDECLARATIONSESSION C where B.SESSIONID = C.ID and C.ACCOUNTID = A.ID and inform = 10252);
  
  COUNT (*)
  ----------
  2098
  
  If I remove the apostrophes in the query parfile then I get the following error in data pump export.
  
  DEU-00014: invalid value for the parameter, "schemas".
  
  The PATTERNS option is not specified in parfile him and the TABLES option specifies that the table POSDECLARATIONQUEUE.
  
  Can someone help with this, I can't seem to be able to get the syntax just to work within data pump.
  
  Kind regards.
  Graeme.
  
  Published by: user12219844 on April 14, 2010 03:34

  It seems that your query can be a little wrong:

  That's what you have:

  QUERY = "POSDECLARATIONQUEUE:where SESSIONID in (select"B.SESSIONID"from POSACCOUNT A, POSDECLARATIONQUEUE B, POSDECLARATIONSESSION C, where"B.SESSIONID"="C.ID"and"C.ACCOUNTID"= 'A.ID' and 'Inform' = '10252')" "

  That's what I would have thought it should look like:

  QUERY = POSDECLARATIONQUEUE: "where SESSIONID in (select B.SESSIONID from POSACCOUNT A, POSDECLARATIONQUEUE B, POSDECLARATIONSESSION C where B.SESSIONID = C.ID and C.ACCOUNTID = A.ID and inform = 10252).

  You want to double "around the full query and you have not need single ' around all =." The single ' treat these values as strings and he said

  "B.SESSIONID" = "C.ID".
  the B.SESSIONID string is the string C.ID

  In your query you used in sql has been

  B.SESSIONID = C.ID

  that said, it is that the B.SESSIONID stored value equal to the value stored at C.ID

  Which is what you want.

  Dean

• get the multiselect table data

  Hello
  
  I use ADF 11g (11.1.1.1.0 Jdeveloper) and EJB to access data from the database.
  I have a table with multiselect true. The code for the bean of support to return the selected lines is:
  
  Table RicheTableau = this.getT1 ();
  Iterator itr = table.getSelectedRowKeys () .iterator ();
  While {(itr.hasNext ())}
  The list l = (List) itr.next ();
  Key = (Key) l.get (0);
  System.out.println (Key.GetAttribute (0));
  }
  
  The problem is that the inner loop is executed once when I have more selected rows (last row is printed).
  Any help on this?
  
  Published by: Bostjan Lipnikar on 29.10.2009 06:31

  Hi warda,.

  Your code is fine looking for me. Just delete the property "selectedRowKeys" of the table and see (make sure you set rowSelection multiple ownership).

  Go through the following by Andrejus blog if you stuck anywhere:
  http://andrejusb.blogspot.com/2007/02/multi-selection-feature-and-ADF-faces.html

  Jean Lou

  Published by: Marc Israel on October 29, 2009 05:33