Regarding the file of configuration on the WLC

Similar Questions

• ERROR:-cannot download the WLC config.

  Hello

  I'm not able to save the configuration of the wcs of wlc controller Please take a look and suggest me if I'm doing something wrong here.

  (WISN-slot1-2) > transfer mode upload tftp

  (WISN-slot1-2) > upload datatype transfer config

  (WISN-slot1-2) > transfer download IP_serveur 10.10.10.10

  (WISN-slot1-2) > download transfer path.

  (WISN-slot1-2) > name of download WLCconfig file transfer

  (WISN-slot1-2) > transfer download starts

  Mode............................................. TFTP

  TFTP Server IP... 10.10.10.10

  TFTP Path........................................ /

  Name of the TFTP file. WLCconfig

  Data Type........................................ Configuration file

  Encryption... People with disabilities

  WARNING: Config File Encryption Disabled *.

  Are you sure you want to start? y (y/N)

  TFTP Config from transfer.

  Preparation for transfer error!

  NOTE: I use the WCS as the server and do not use any what other tftp. Any help is appricaited.

  Hi Neha,

  You must restart the WLC controller if the WLC is placed on the WISN Module you must reload the WISN module after you will be able to download and upgrade the firmware of the controller.

  What is happening because of some isue internal with WISN/WLC material. I ask you to do and your problem will be solved.

  Kind regards

  Reem

• Yes, another question regarding the freezing of Safari - EtreCheck report included

  Yes, another question regarding the freezing of Safari.

  From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

  I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

  Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

  Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

  Thank you in advance.

  Ben

  -----------

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-28 22:48:58

  Download EtreCheck from https://etrecheck.com

  Time 05:45

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Apps are broken

  Description:

  Safari freeze when opening new tabs / switching between the tabs.

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 3

  1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 389

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. GoodShop.updater.plist

  ~/Library/application support/GoodShop/updater

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/Symantec/virus

  [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

  / Library/Extensions

  [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

  [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

  / System/Library/Extensions

  [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

  com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

  com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

  com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

  Startup items: ⓘ

  CMA: path: / Library/StartupItems/cma

  RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 165 tasks Apple

  [operation] 65 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 161 tasks Apple

  [operation] 83 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

  [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

  [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

  [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

  [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

  [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

  [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

  [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

  [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

  com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

  com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

  [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

  [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

  [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

  [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

  [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

  [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

  [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

  [loading] com.symantec.navapd.plist (2009-09-14) [Support]

  [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

  [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

  [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

  [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

  User launch officers: ⓘ

  com [running]. GoodShop.updater.plist (2013-09-24) [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Dropbox application (/ Applications/Dropbox.app)

  ExpressVPN application (/ Applications/ExpressVPN.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] com.DYMO.pnpd

  [ongoing] com.getdropbox.dropbox.83552

  [ongoing] com.google.GoogleDrive.81632

  [ongoing] com.macpaw.CleanMyMac3.Menu.80672

  [ongoing] com.mcafee.ssm.ScanManager

  [ongoing] com.mcafee.virusscan.ssm.ScanFactory

  [loading] 420 tasks Apple

  [operation] 193 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-18)

  Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

  DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 (2010-11-15)

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

  SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

  JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

  Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

  GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

  SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Flip4Mac WMV (2012-05-15) [Support]

  Growl (2015-09-16) [Support]

  Java (2016-04-18) [Support]

  Norton\nQuickMenu (2010-11-16) [Support]

  Trusteer Endpoint Protection (2016-04-18) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  1% kernel_task

  0% fontd

  0% SymDaemon

  Top of page process of memory: ⓘ

  445 MB kernel_task

  Mdworker (18) 430 MB

  164 MB Google Reader

  Dropbox 123 MB

  VShieldScanner (4) 66 MB

  Virtual memory information: ⓘ

  106 MB free RAM

  4.15 GB used RAM (770 MB cache)

  6 MB used Swap

  Diagnostic information: ⓘ

  April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

  com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

  28 April 2016, 22:21:42 self-test - spent

  April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

  April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

  April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

  April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

  /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

  April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

  / System/Library/CoreServices/SubmitDiagInfo

  April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

  April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

  April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

  April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

  / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

  26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

  Remove all apps viruses you have

  Symantec, McAfee, Norton...

  CleanMyMac3

• AP failed to connect with the WLC.

  We have 5 sets of 1700 APs works on the mode of the controller and cisco WLC 2500.
  I configured the controller as I always used to do, but this time the access points have been unable to reach the controller.
  That's what I did:
  controller IP address:192.168.1.250/24
  GW:192.168.1.1
  Primary DHCP: 192.168.1.250
  I have connected the port1 controller with ethernet cable from the switch and the same switch I connected the AP.
  We used the adapter instead of the POE switch.
  I even tried assigning address to AP directly through the console as:
  CAPWAP ap controller ip address and so on. This did not help either.

  There was this message in the AP "% CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP." DHCP IP renewal. "
  Moreover, the POE ports in the controller, they provide enough energy for the PA to operate?
  Help, please.
  I have attached the PuTTY log as well.

  Hello
  WLC connection has successfully been created. Then he for some reason any. I don't know if this helps, but try to connect the ethernet cable directly to the AP instead of port POE port to THE.
  You can use port POE on AP even if you don t use the POE switch.

  And regarding the port POE on WLC. Cisco doesn´t recommend that you directly connect AP to WLC, but it is possible.

  Also I Don t see that the IP address is assigned by DHCP.
  Try also to use the commands:
  CAPWAP ap ip address...
  CAPWAP ap ip default-gateway...

  I guess the WLC and switch are configured correctly.

  EDIT:

  I had similar problem today.
  Just connect the cable from the console to AP, go to mode and type the commands:
  Claire capwap private-config
  Claire lwap private-config

  then reload AP with command "reload".

  After these commands AP joined succesfully WLC

• Update from the WLC-12 to WLC-50

  If someone knows if I would run through all of the questions during the upgrade of a wireless controller Cisco WLC-12 to a Cisco WLC wireless controller - 50? Can we predict problems with me simply copy the startup configuration of the WLC-12 to the WLC-50? All comments are appreciated.

  Thank you

  Travis

  I don't think that that is supported. It is best to configure the new wlc. You don't want to risk having a corrupt on the wlc configuration file. Configure the new, a side by side for you can compare the configuration... does not take long.

• How to retrieve the RADIUS shared secret key on the WLC 5508

  Hi all

  The wirelss privious admin left our company and did not let the other know the shared secret key on the WLC 5508 Radius.

  The 5508 WLC runs on the 7.0.98.0 code. I can access the viao WLC CLI and GUI. I can also access the Win2003 Radius Server, but the button displays an asterisk for me. I have listed partial RADIUS config of the WLC below. How can I get the RADIUS shared secret key? Thanks in advance.

  (Cisco Controller) > show RADIUS summary

  Vendor Id backward compatibility... People with disabilities
  Call Station Id... lower case
  Dial the Station Id Type... IP address
  Aggressive failover... Activated
  Keywrap.......................................... People with disabilities
  Rescue test:
  Test Mode.................................... Off
  Probe of username... cisco-probe
  Interval (in seconds)... 300
  MAC for authentication Messages... hyphen delimiter
  MAC for Accounting Messages... hyphen delimiter

  Authentication servers

  The State of the Port Address Type server all RFC3576 IPSec - AuthMode idx / phase 1/group/life/Auth/BA
  ---  ----  ----------------  ------  --------  ----  -------  ------------------------------------------------
  1 NM 10.xx.18.48 1645 on 2 off off - no/unknown/group-0/0 None/None

  Accounting servers

  The State of the Port Address Type server all RFC3576 IPSec - AuthMode idx / phase 1/group/life/Auth/BA

  -Other - or ITU (q)
  ---  ----  ----------------  ------  --------  ----  -------  ------------------------------------------------
  1 N 10.xx.18.48 1646 enabled 2 N/A disabled - no/unknown/group-0/0 None/None

  Kind regards

  Robert

  You can retrieve the RADIUS shared secret key as other passwords that are stored on the WLC by using the procedure at the following link:

  https://supportforums.Cisco.com/community/NetPro/wireless-mobility/begin-wireless/blog/2011/11/04/recover-wepadminguest-account-password-from-WLC

  NOTE: WPA keys are not available through these methods.

  Basically, you can enable password in clear text on the wlc with 'config passwd-cleartext enable' and then issue a "view orders of the running-config' - your RADIUS configuration command should now display the shared secret.

  -Pat

• Windows 0 x 643 error code... regarding the installation of Microsoft Windows Update

  Get rror Code 0 x 643... regarding the installation of Microsoft Windows Update ===>>> update of security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941).  Have tried to install several times with the same result.  Please NOTE... that every time I go to Windows Update (& execution 'check available updates') than post results this update (security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941)) however indicates that the update is already downloaded on my machine & requires ONLY being installed.  (personally, it is my belief that there could be a problem with the download... what causes the installation to fail... However NO way to re - download is available?  I tried to delete my temporary Internet files & Cache + ran disk cleanup... niether have removed the download of my machine.  Also checked 'Add Remove Programs'... just to see if it was listed there... and it wasn't!  So certainly, the update is NOT installed, I can NOT delete the download that is perhaps corrupt... and preventing me to replace it with a NEW copy.)   ANYONE GOT SUGGESTIONS?   Help, please!  All other updates are installed on the machine... other than this one, & I'm off clues as to what to try next.   Thank you!

  information system: Microsoft Windows XP

  Media Center Edition

  Version 2002

  Service Pack 3 (w / all available updates installed) EXCEPT this one!

  HP Pavilion Notebook dv6120us

  Intel Core 2 CPU

  T7200 @ 2.00GHz

  2.00 GHz, 1.99 GB of Ram

  Internet Explorer Version: 8.0.6001.18702

  Build: 86001

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941.

  Check if it is installed and report.

• Where should I contact regarding the functions of newsgroups in Windows Mail and Windows Live Mail?

  Where should I contact regarding the functions of newsgroups in Windows Mail and Windows Live Mail?

  I seem to have problems with Windows Mail, perhaps caused by the update KB978542 and/or run the program WMUtil.

  One of my Windows Vista Home Premium SP2 64-bit machines, whenever I try to start Windows Mail, it displays 0x800C0155 error message, then a message saying that he was unable to start because MSOE. DLL could not be initialized.

  The other has problems of material type instead: it's a laptop with no mouse and no reliable connection to the internet.

  On my Windows Vista Home Premium SP2 32-bit machine, I can start Windows Mail, but most local issues have disappeared - only the Inbox is visible.  I already checked that subdirectories for the other files are still present.

  All three of these machines have had problems of backups for months and have had no successful backup for the last two months.

  I have trouble finding enough information about Windows Live Mail without having to install this program if it could avoid these problems or just make it worse.

  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  The link above covers solutions to many problems with Windows Mail.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  «The other has problems of material type instead - it's a laptop without mouse and reliable connection to the internet.»

  A computer repair shop will help you with hardware problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.google.com.au/search?hl=en&q=Windows+Live+Mail&btnG=Search&aq=f&aqi=G2G-c1g7&AQL=&OQ=&gs_rfai=

  Read the info at Google re Windows Live Mail.

  See you soon.

  Mick Murphy - Microsoft partner

• unloading of feature to make dhcp off the WLC and put it on Active Directory.

  I need to use the feature of unloading to dhcp off the WLC and put it on Active Directory.  Someone at - it a walkthrough or a page for this?  I know it's just a checkbox and a redirect to the new dhcp server, but where the hell is the configuration on the WLC?

  Thank you!

  -anne

  You can go there.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001001.html

  Point to your existing ad integrated DHCP server.

• For the WLC domain user authentication

  Hi guru

  Im having a problem in the configuration of my WLC domain users. I have ACS v3.3 and WLC 4112.

  I followed these instructions, but still I keep to authenticate whenever I tried to connect my laptop to some SSID. And in addition, the windows login me invite only once. Please help me

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml#manual

  Thank you.

  What says "Machine Authentication is not allowed"?

  Make sure that ACS helped him:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml

• Config of basis for the 2nd and 3rd of the WLC?

  I saw the discussion about the configuration of the failover on of the WLC. I think I have a pretty good understanding of what is supposed to happen here. But what is really clear is the config of base on the 2nd and 3rd in WLC. They need to be configured exactly like the first, with the exception of the unique fields such as host name and ip addresses, interface and such? Usually people take the config of the first and do a "Find and replace" to fix the config for subsequent controllers? I will add 2 more to my controller in the near future and try to have a better understanding of the process until I have to implement. Thank you!

  You are right in the config WLC - unique IP/hostname info and everything else the same. There is usually not a lot of changes of configuration to do on the additional WLC, the few times that I did I have manually configured things or used WCS. Configure additional WLC being part of the same group of mobility and/or hardcode primary, secondary & tertiary controllers AP for failover.

  HTH

• Uplink on the WLC 2100 series

  Hello

  I missed something in the Cisco WLC 2100 series documentation. In fact, the plug technical it is mentioned that the WLC 2100 "provides eight 10/100 Ethernet ports to support a combination of access points and rising redundant LAN", while in the configuration guide noted that the WLC 2100 supports no LAG (aggregation of links). So how WLC 2100 can use a redundant network connection without aggregation of links?

  Thank you in advance.

  You can use a port for management and interface ap - manager and another for the vlan specific used for the ssid of your wlan with connection of access points to your WLC. This way you can say that port 1 is your management and ap-Manager, port 2 is for your internal ssid vlan x, port 3 is for your voice ssid vlan x, port 4 is for the traffic of comments, 5 & 6 port is used to connect the two access points.

• Can someone give me details and difficulty regarding the vulnerability of traumatic psychosis for Cisco ASA version 5?

  We have experienced frm, our compliance team that we run in traumatic psychosis wanted vulnerabity so know the fix and document...

  Hi James,

  We have a PSIRT filed regarding the vulnerability of traumatic psychosis, please see details below:

  CSCur00511    Evaluation of the ACS for CVE-2014-6271 and CVE-2014-7169

  https://Tools.Cisco.com/bugsearch/bug/CSCur00511/?reffering_site=dumpcr

  Here is the information of fixed code to various versions:

  Fixed code:
  Patch for CSCur00511 of the DDT is ready and available on CCO.
  The patch is included in all update rollups version 5.4.0.46.7/5.5.0.46.6/5.6.0.22.1 and later. We recommend that you download the latest cumulative patches.

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.4 / 5.4.0.46.0

  Patch file name: 5-4-0-46 -.tar.gpg
  Read me and displays instructions: Acs-5-4-0-46--Readme.txt

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.5 / 5.5.0.46

  Patch file name: 5-5-0-46 -.tar.gpg
  Read me and displays instructions: Acs-5-5-0-46--Readme.txt

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.6 / 5.6.0.22

  Patch file name: 5-6-0-22 -.tar.gpg
  Read me and displays instructions: Acs-5-6-0-22--Readme.txt

  Download of: CEC / Support / download software http://www.cisco.com/cisco/pub/software/portal/select.html?i=! y
  Letter: Security / identity management / Cisco Secure Access Control System / Cisco Secure Access Control System 5.3 / 5.3.0.40

  Patch file name: 5-3-0-40 -.tar.gpg
  Read me and displays instructions: Acs-53 - Readme.txt

  Kind regards

  Tushar Bénard

  Please evaluate the post if you find it useful!

• Traffic LWAPP Flow the WLC

  Hello

  I need to know about traffic flow in the WLC.

  I know that all traffic must pass in the WLC, but I need to know if I can change it.

  Example:

  I have a lwapp ap, but I want to pass traffic in this unit and after crossing the cable without a pass to the WLC system.

  Can I do it?

  I need to know too much about the options when I'm setting up an AP in the WLC as local, bridge, h - collect, monitor and others.

  Thank you.

  Hello

  Here is the link that says u more on LWAPP traffic study...

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml

  Abd here is the link which explains on the modes of operation os AP...

  http://www.Cisco.com/en/us/docs/wireless/controller/7.0/Configuration/Guide/c70lwap.html

  Let me know if this naswered your question and please remember to note the useful messages!

  Concerning

  Surendra

• Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy whatever it is ov

  Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?

  This has happened

  A few times a week

  Is a few weeks ago

  Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.
  Filter = general.useragent.
  Preferences are "BOLD", a line at a time, and then select reset, right click
  Then restart Firefox