Region DVD unlock satellite 2410?

Hi a friend of mine has a carpet and a Toshiba Satellite 2410 * a DVD - RW combo drive. Unfortunately, the drive is locked to region 1 and there need region 2, but Windows does not allow changes more. Is there a formal or informal way to fix or force this player to play region 2 DVD?

see you soon,

Richard S.

Hello

Well, as far as I know on the official course, you can change the region settings 5 times.
In addition, you can check some other topics in the forum.

http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5511&MessageID=18805#18805

Good bye

Tags: Toshiba

Similar Questions

  • IDE error - unrecognized DVD player - Satellite 2410-504 #1

    Hello, recently I got a rug * a dvd - ram UJ - 831 s Reader installed to replace by my insurance policy in my Toshiba Satellite s2410-504. The car worked well until recently, when I get the IDE #1 error at startup, then the drive does not appear in Windows - Win Explorer or Device Manager. I tried to update the firmware for the recommended: DVD + r / + RW/RAM Drive(UJ-831) F / W revision: V102. But I got the message that the drive is not connected when I am asked to open it. I want to emphasize that I tried this update when the drive is actually (sometimes is just appear randomly, sometimes it appears after the release of the standby mode)

    I also tried 4 or 5 times the resettlement of the drive with no luck. How can I fix my drive? I have read on the bypass and master/slave problems but not too sure about this or if it's the right thing to do.

    Thanks in advance for your help,
    David

    Hmm, it would be very interesting to know if this message appears.
    For me, this looks like an auto damage with a bad firmware.

    > I get the message that the drive is not connected when I am asked to open it
    For most of these messages are displayed if the drive is not connected OR the firmware was bad. I think that it s because of the second possibility.

    Maybe the firmware has changed the master/slave/c-salt settings and now the BIOS does not recognize the disc correctly.

  • Satellite 2410-603: SD-R2212 cannot read DVD-R or DVD authentic

    Hello
    can anyone help, my dvd player on my authentic satellite 2410 603 can't/wont read dvd - r or DVD IE Disney etc.
    DVD + r seem to be ok, someone has any ideas?

    Hello

    Strange. Check if the firmware update will solve this problem:
    eltype http://www.Toshiba-Europe.com/storage/PFT.asp?page=pft&NAV=ISH_ARC&model=SDR2212&spr_mod = COMBOSL & spr_model = SDR2212

  • Satellite 2410-303 - I need a new compatible CD/DVD player

    Hello.

    First of all, I'm new to this forum, I am of the Spain and my English is very bad.

    Well, I have a Satellite 2410-303 with a mod of DC/DVD unit. TEAC DW-224TH-34. This unit broke down. I need a compatible device, or the same, but I have not found (I found one for almost $180 ship more, very expensiveeee for me).

    I need a list of the device compatible with my laptop. In the manual, this information doesn't exits.

    Thank you very much

    Hello

    Well, I checked the manual the user and on the first pages you can find a few displayed records, they are compatible with the laptop:

    TOSHIBA SD-R2212
    Matsu * a UJDA740 *.
    TEAC DW-224TH *.
    (*: any letters or numbers)

    So if you are looking for a player with Google you should find a few online shops or you contact an authorized service provider to get a new drive.

  • NEC ND-6500 a DVD +-R/RW drive satellite 2410-504?

    Can someone tell me if a NEC ND-6500 is DVD +-R/RW drive will work in my laptop Satellite 2410-504? I tried that provided new Assembly, but the BIOS did not recognize and give up an IDE #1 error message at startup. I don't know yet if it was a faulty drive or if the player is simply not compatible. Any help with this would be greatly appreciated.

    Hello

    you might find some useful information here:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3720&MessageID=11933#11933

    BR

    Tom

  • Satellite 2410-s205 does not supply power to the top

    Hello everyone, I have a Toshiba Satellite 2410-s205 and it has installed windows xp home. It started to freeze and go slowly. Then I ran adaware and clean it. I installed spybot s & d and after update adware programs I tried to restart the computer and it froze. I shut it down using the power button, but now it does not restart.

    When you press the power button, there is no fan activity, only on dvd rom light and goes back to the wide. Does anyone have an idea on what I can verify. Memory, Cpu, etc or what could be the problem.

    The battery has a full charge, more I plugged it. The led does not illuminate when you press the power button.

    Thank you.
    Matrix733

    Hello

    Well well, without testing the laptop it of not possible to give you an answer exactly.
    It of needed to check the laptop only computer parts (memory, CPU).
    But it's not easy to verify no additional experience.
    In my opinion the best way is to contact the ASP. It of the best way to locate the fault.

  • Satellite 2410-601 - drive is not recognized in 'my computer '.

    Hello
    CD-ROM/DVD-ROM drive
    TEAC DW-224TH-A
    5.1.2535.0 driver version
    If I insert a disk while Windows is loading, it not recognize in my computer. Otherwise, the drive is not recognized in my computer, but I can access the content. Problems occur if I start with a drive that recognizes workstation and then change the drive and computer think it's always the other and problems with AutoPlay.
    My main concern is that the last time this happened he then deteriorated and then the hard drive doesn't quite work and I needed a replacement.
    Is there something I can do? (I could not find a newer driver).
    PS - I own a TOSHIBA Satellite 2410 601.

    Thanks for any help

    Hello

    Did you check device manager if the drive is recognized properly?
    Check it out. In addition, you can try to remove the drive from Device Manager.
    After restarting the OS should recognize the drive again.

  • Upgrade the hard drive Satellite 2410 404

    Hello

    I want to improve my toshiba Satellite 2410 404 with a hard drive again. For now I have just 30 GB drive and is not enough for me.

    I checked three products to a new Toshiba hard drive.

    MK-8032GAX
    MK-1032GAX
    MK-1233GAX

    The model MK-1032GAX 100 GB is my favorite and now my question is, if this drive work with my laptop (im going to install the drive in a toshiba technical station, don't do myself.) or if I have to change something with my mobile phone, update the bios or something.

    Just tell me what I should do to work with this drive or if my laptop is not ready for it because it is nearly three years.

    Thank you very much.

    Hello

    As far as I know this laptop supports only 20 GB; 30 GB; 40 GB and 60 GB hard drives
    I guess that a 100 GB HARD drive will not be recognized by the BIOS.

    60 GB MK6021GAS HDD
    MP40KF 40 GB HARD DRIVE
    MK30kef 30 GB HARD drive
    MQ20ksf 20 GB HARD disk

    Hope this info will help you

  • How to tighten the hinges of a Satellite 2410?

    How to tighten the hinges of a Satellite 2410 please?

    Hello

    Hinges what you mean exactly?

    I think you should ask a technician for laptop. The fact is that you will find here only the users here because it s a user to user forum and I have never seen anyone from Toshiba here.

    By the way: it s always interesting to talk a bit with the technicians! ;)

    Welcome them

  • Satellite 2410-304 s - how to access the BIOS?

    Hello!!
    I need to access the BIOS of my computer. It is of a Satellite 2410 304 s. I tried with ESC then F1 but I can not adhered.

    Thank you for all

    Hello!

    Normally, you can access the BIOS using the ESC key at the beginning upward.

    I had Satellite 2410 too and I was able to access BIOS by pressing ESC. You must press on immediately after power on the laptop.

    Check it!

  • Satellite 2410-404: General Extension RAM issues

    There are two memory two modules (256 + 256) installed on my laptop Satellite 2410-404. There are two locations of memory on my laptop. I want to thank the memory, but I could not find the answers to my questions, but I looked in the manual and to this site and this forum... My questions are

    1. can I extend 256 MB memory by swapping the memory module by module of 512 MB 256? Of memory should what type of module I take?

    or

    2 Schould I change the bars of memory at the same time? Of memory should what type of module I take?

    3. What can I do with the old memory modules?

    Thank you in advance,
    Vladimir

    Hello

    The fact is that you can upgrade the memory maximum: 1024MB.
    In this case, you can use the max 2x512MB memory modules.

    I've studied a bit and found these compatible memory modules:
    PC2100 128 MB (PA3126U - 1 M 12)
    PC2100 256 MB (PA3127U - 1 M 25)
    PC2100 512 MB (PA3164U - 1 M 51)

  • Satellite 2410-504 does not start after you remove RAM module

    Hello

    I need assistance or advice.

    I have a portable Satellite 2410-504 and I was looking for to increase the memory, I am a Novice with computers, I decided to remove the Module that is already in place (to see if I was capable of employment)

    After removing and then returning the Module, then I went to turn on the laptop and Yes you guessed it, NOTHING!
    The power lights are on and the light comes on but the screen is blank and there are no hard disk activity.

    Now, trying to get back on my actions, I have been unable to completely remove the battery but I'm sure that he slipped on the connectors.
    Could I have caused permanent damage or are my actions retreivable.

    Thanks in advance,

    Mike-c

    Hello

    Did you check if the RAM has been inserted correctly?
    Select this check box.
    But of course, the RAM could be damage due to wrong treatment nothing is impossible
    My computer laptop didn t start because one of the RAM died suddenly.

    What you could do is to remove the battery and unplug the AC adapter.
    Then you have to wait a little (one hour) and need to connect the two parts again.
    Then try turning on the laptop computer.

  • Satellite 2410 PS241A - what is caught max supported RAM?

    Hello
    I recently joined the community "Toshiba." My question is about the Toshiba Satellite 2410 system unit.

    Does anyone know the maximum RAM that can be installed on the Toshiba Satellite 2410 system unit model No. PS241A? The vehicle currently has 1 GB of RAM installed.

    If the device can support / have 1 GB of additional RAM, is there a hardware/software/setting the switch for the additional 1 GB of RAM to be recognized?

    Thank you.

    ESD

    Hello

    As far as I know this laptop (very old indeed ;)) supports two locations of memory and it seems to handle max 1 GB of RAM (2 x 512 MB))
    You can use the modules SODIMM 512 MB 266 Mhz.

    Welcome them

  • Satellite 2410 - looking for drivers

    I am after the drivers for a Satellite 2410 (PS241A-602FEP).

    Any ideas?

    Hey,.

    You can download all the drivers for this model on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    You should look for in * Archives * to find them. The model number is similar (PS241E), but they still have to work on your model. :)

    Check this box!

  • Need to specification SD TypA Controller for Satellite 2410-303

    Hello

    for the moment, we are working on the QNX driver for SD controller. This device is integrated in my notebook - model Satellite 2410-303.
    SD controller is visible by the o/s as:
    Vendor ID = 1179 h, Toshiba America Information Systems
    Device ID = 805 h, TypA SD controller

    Where can I find the specifications for this controller?

    Kind regards
    Jacek

    Jacek: this is the forum user. To be honest, I don't think that someone can offer you assistance.
    As I see you just Poland. Try to contact the closest to ASP, it. They have access to the database of Toshiba and I hope they can help you.

Maybe you are looking for

  • Satellite P300 - problem after BIOS update

    HelloI have:Satellite P300-20 bPSPCCE-05J011RUI updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)My problem is:Loading and relocation of attempt of Windows, the following error message is fixed: "Technical info

  • HP Pavilion Notebook: Disable B & O Notification

    I would like to disable the B & O, notification that comes every time I took of plug-in/plugout listener.

  • DGN1000B and Apple devices

    Hello I have some problems with my apple devices and the DGN1000B router. It happens with the iphone 6 and macbook pro. The connection is always set in place, but a few times when you surf the internet, safari cannot resolve the address. Not only in

  • TCP

    Hello world I'm trying to send some datas on tcpserver help LV vi as in the picture. I use the while loop to continue to run the SW, so when I send the bytes by pressing button TM it works fine, but when you try to send again the same bytes (which wo

  • initialize a retroactive loop

    Hi all I am a beginner on labview for a few months. I develop a HCI life-saving data when the user clicks on the buttons. There is a "history of the data record" which saves all the actions performed by users. I need to delete the history (a listbox