Register with different versions of the CSA to Cisco ACS primary

Similar Questions

• Can I use Lightroom CC between two Macs with different versions of the operating system

  I have the CC for photographers. I keep my work to Dropbox LR catalog and access them from my MacBook Air laptop or my desktop iMac computer. Currently, two computers are running the same version of Mac OS. I think to upgrade the laptop for the new OS of Sierra, but because the office is older, I thought maybe not upgrade (it is near the minimum end of systems that can run Sierra). Can someone tell me if there is a conflict with the help of the LR catalog between two computers if they are not both running the same version of Mac OS. When the catalog is saved in the operating system that you are starting, it would still be compatible for use on the computer with the previous version of Mac OS? Thank you! Barbara

  If the machines use the same version of the software, then the files should be feasible in both machines.

• Edited the photo transfer from one computer to another with different versions of the items.

  My old macbook pro has 12 items, my new macbook pro has 14 items.  The old laptop doesn't have the appropriate osx version to run 14.  I will be able to transfer photos has changed since the new computer (w / 14) to the old computer (w / 12)?

  I suggest put the .psd for your slide show files in a single folder on your DHM and connect via USB or love at first sight.

• inDesign/inCopy workflow with different versions of the software

  is it possible to use inDesign/inCopy workflow if an end is on the cloud (InDesign), the other is to use InCopy CS4 or 5?

  Thanks for your help.

  N °

• Targeting different versions of the operating system with the same code

  Hello again,

  I'm looking to use some features of the OS 5.0 such as the transitional API.  Is there sort of having a base code that will compile in different versions of the JDE, but exclude the code blocks if the OS does not meet the requirements?

  For example, transitions on a device to OS 5.0 but not appear on device OS 4.5.

  Ideally, I'm looking for a solution that would integrate directly with Eclipse and debug without any extra steps in the two versions of the operating system.

  Try to do research on the "preprocessor directives", you can use this to do what you need.

  Basically, you wrap the code OS 5.0 in the guidelines such as:

  #ifdef VER_5
  System.out.println ("This compile for 5.0");
  #else
  System.out.println ("This compiles for no 5.0");
  #endif

  Then, enable you or disable directives in the compiler generate COD versions for each platform.

  Jason

  www.lcamobile.com

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Songs from the same album are organized in different versions of the album

  Several songs on the album are purchased on iTunes so when weve deviated our own music library on tends them to be several versions of each album it appears each with different songs on the album. The problem still persists when viewing music on any of our apple devices, even when you look at the 'albums' category there are several versions of many albums that have only 1 or 2 songs each. We tried to manually change how the songs should be sorted and nothing seems to work?

  If iTunes displays multiple instances of an artist or an album then generally what works is to select all the associated tracks and use read information to add say end X for each of the areas that the slopes have in common:

  • For an album. Album, artist of the Album and artist (if the artist is the same for all tracks) *.
  • For an artist; Album artist (artist and unless there is the comments/featured artists listed that should not be changed)

  Apply the change which merges things together, then remove the excess characters. Occasionally, it can help to close and reopen iTunes between two renaming operations. Part of a compilation should also be set in a consistent manner.

  * If the titles must be synchronized to a non - iOS device, there should be a common artist and/or album must be defined as a Compilation.

  Use the view of songs and display fields, Album, genre, Album, Album artist, genre artist Album, artist and genre artist side by side to see you whether or not it is necessary to change the artist and if sorting values could be the cause of additional problems. See grouping in albums, titles for help if necessary.

  Another tip duplicates stubborn reality. At one point, I had three batches of various artists in the view of artists in my iTunes game library that wouldn't meet usual backward X treatment. What I found worked was adding the final X, but with each group, iTunes wanted to separate start typing a value and let iTunes autocomplete of the Var... for various artists. Collection of AutoComplete lists seemed to work when the full value of collage/montage does not.

  TT2

• The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program

  I try to use the Microsoft Office tool that implement an MSI for 64-bit Office 2010 installation file.  The tool works file and creates the msi file.  I get to the tool by going to the x 64-bit folder on the office 2010 installation disc.

  I install a new virtual machine from Windows 7 and tried to use the MSI file to install office 2010 and I get the error:

  "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program"

  If I just click Setup on the office 2010 dvd he moved very well on the same VM window7.

  Does anyone have an idea how do to understand why the windows installer keep fails or what he wants?

  If I click on the msi even on a system with office 2007 is installed, I get the same error.

  Thanks for the help

  jbabe

  Windows Update has nothing to do with the upgrade or installation of Office 2010. Please post future questions in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error message "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program."

  Original title: cannot install WMP11, update rollup 2

  I'm still on WMP 10 for a reason, and I wanted to connect my PC with 360 videos. I downloaded the update, but he told me to go get the Update Rollup 2 or something, so I tried to install it and he told me that I needed to go get the .NET framework 1.1 and .NET framework 1.1 SP1. I went to download them and install them, but he tells me that "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program".

  I Googled, tried of all kinds, uninstalled SP3 and tried and nothing.

  Hi xelliotx,
   
  I suggest that you follow these steps.
   
  Step 1:
   
  First of all, download and install .net Framework Cleanup Tool to remove selected versions of the .NET Framework on your computer.
   
  Step 2:
   
  Manually install the versions of Microsoft .NET Framework below:
   
  Microsoft .NET Framework Version 1.1 redistributable package
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
   
  Microsoft .NET Framework 1.1 Service Pack 1
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en
  Once this installation is complete, try to install the other required software and check.
   
  See also:
   
  Error message when you install an update for .NET Framework 1.1 or the .NET Framework 1.0: "the upgrade patch cannot be installed by the Windows Installer service.
  http://support.Microsoft.com/kb/940332
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Please help me to orgnize different version of the same application

  Hi all

  It is so messy for me to create a different version of the same application to different platform, to touch, to not touch.

  Can someone help me understand how to manage the same code base for all versions. In addition, we manage all the new functionality of the platform. These things also create headaches by signing the application. With JDE plug-in in eclipse, we are not able to understand, how we will do it.

  Please help me.

  Thank you.

  Adarsh Pandey

  Hi Alaka

  You can make use of the Macro.

  Suppose you want to have the same code base for touch and non-touch devices. You can define a macro saying IS_TOUCH. now in the code, you can put a brake, if this option is enabled, then include the key code that include no button code.

  We had done the same for "BOLD" devices and the storm.

  You can give it a try, in the same way, you can have separate devices also Macro.

  Thank you

  Ankit

• Separate cod file, necessary tool for different versions of the signature BONE?

  Hi all

  I installed the blackberry JDE 1.3.0 eclipse plugin that contains the default value
  package inside plugins, now using the url net.RIM.ejde.componentpack6.0.0_6.0.0.30
  http://www.BlackBerry.com/go/eclipseupdate/3.6/Java download packages of components for 5.0 etc.. After that the signing tool will be installed with this eclipse.

  My question is if my application will be used for all versions of the OS, so what do I do?

  1 should I I generate a single file of cod for 4.x or it should be necessary to generate a separate file of cod to 4.5.0, 4.6.0 4.7.0

  2 If am will have to sign the cod of the file then I need to install the tool to separate signature for each operating system? or a unique signature tool installed in eclipse itself is enough to sign all the cod files that are generated in the different versions of the OS?

  can any please help me understand these things

  Thanks in advance,

  Kitty

  This signature tool is the same for all levels of the operating system. I usually use the tool last signature, even for the 4.2 signing apps.

  Compiled cod are compatible forward but not backward.  So, if you compile using OS 4.5 it can work in devices running OS 4.5 and above.  However if you compile in OS 6.0, then it is not supported on devices running something more than that.

  You will find that you might want to use the facilities available in newer versions on the new phones, so you will need to compile separately in this case.  There are a variety of options to achieve this, but I would look first for the pre-processor.

  There is a small problem in OS 4.7, so if I develop for OS 4.5 - OS 6.0 and the code will be the same for all devices, I usually provide two builds, one for pre OS 4.7 and the other to post that.

• Different Versions of the JDE running on a computer

  Is it possible to run different versions of the JDE on a single computer.  I remember some time back on the posts, people are complaining about in this regard.  Sign tool would work on all versions?

  I don't want to experiment and risk having to reinstall my keys again if someone already knows the answer to that.

  Thank you

  I installed with different JDE and it works very well. I havn't found any problem signing too.

• I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp)

  I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp). My pc with win 7 work ok, but the pc with win xp not 'see' the printer on the network. What is the additional driver should I install?

  Thank you

  Hi @OHIMATAS,

  I see by your post that you are unable to network that is connected the printer to the Windows XP computer, but Windows 7 computer. I can help you with this.

  Make sure that the Windows XP computer is connected to the correct network name, not a guest or the other network.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration Page.

  Try and access the printer on the Windows XP Embedded Web server.

  Type the IP address in the address bar of your web browser. (Internet Explorer)

  It loads the page Web has?

  If you are unable to access SAP of the printer, check the IP address on the computer to see if the first 3 sets of numbers match the printer IP. They must match to be on the same network.

  Go to start, type executer run in the start search box, type cmd, and then type ipconfig.
  Check the IPV4 address.
  Now, check the IPV4 address for the printer.
  Do the first 3 sets of numbers match?

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

  Run the Wizard add printer in printers and faxes, if you were able to access EWS of the printer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Can I make different versions of the pages of Muse?

  Hello

  I know I can do another master page. But can I make different versions of the single pages?

  As the customer wants just the logo to be blue instead of green.

  For the moment I want to take screenshots of pages with blue logo, then apply the new master page with different logo to all pages and export it again.

  You can also save the project muse together under a different name.

  I guess that's because you're still in the design process and the client does not know what works for their logo.

  The approach I would take is to fool the Muse project and separately to each site on the export.

  If it's a small site with a few pages and only one master assigned, you could duplicate all the slides (right click on a page in outline view and bookmark duplicate),

  Move them all at the end of the first design and assignment of a new master for them, when you export the site that you will have two sites under a URL.