Registry entry point to restart application not found in the dynamic library KERNEL32dll; Error - smaxpnp.exe - point of entry not found

When I reboot, or start my system I get an error - smaxpnp.exe - not found entry point

Hello

Have you made changes on the computer before this problem?

Smax4pnp.exe is a system process that belongs to the software SoundMAX. It is not necessary for sound to work on your computer, but is mainly used to run or adding components to the software SoundMAX program.

I would suggest trying the following methods and check if it helps.

Method 1:

Step 1:

Start safe mode and check if the problem persists there.

A description of the start in Windows XP Mode options:

http://support.Microsoft.com/kb/315222

Step 2:

Put the computer in a clean boot state, then start in normal mode and check if it helps.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

Method 2:

Try to remove the smax4pnp.exe of your computer and check if it helps.

Follow the steps to remove smax4pnp.exe:

a. Press 'Ctrl', 'Alt' and 'Delete' on your computer to open the Windows Task Manager. "Click on the"Processes"tab on top.

b. scroll down and click on "Smax4pnp.exe." Click 'End process' to stop the currently running process

c. click on the Windows "Start" button, then click 'Search'. Click on "Search all files and folders" on the left panel to open the search box.

d find and delete this file: Smax4pnp.exe.

e. empty the trash to complete uninstallation.

Hope the information is useful.

Tags: Windows

Similar Questions

  • Could not load the turbo tax software & this message "the EncodePointer point procedure entry is not found in the dynamic library KERNELL32.dll.

    Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll.     can someone tell me how to solve this problem?

    I have windows xp 2002 Service Pack 2

    Hi henryjeshom,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Uninstall and reinstall the application of Turbo tax.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    If the problem persists, contact support for Turbo tax for more help and information.

    http://TurboTax.Intuit.com/support/

  • the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

    the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

    Here's a quick fix, do not guarantee to fix but it's worth it.

    Look for your operating system for dbghelp.dll drive. Check the advanced options, search records system, search for hidden files and folders, and search subfolders. Close programs as much as possible. Make sure the results show one in Windows/system32 and other in Windows\system32\dllcache. Right-click on the Windows /system32 and delete it. Wait a few seconds and the supplementary search. You should see it was added back in the dllcache folder and we're in recycler as the image below...

    NOTE: My Windows is under WINNT. Yours is probably Windows.

    Restart the computer and see if the problem goes away.

  • NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

    Hi all

    I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

    They read as follows:

    NtrigApplet - unable to connect to the driver: failure to open the device

    TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

    CAN SOMEONE PLEASE HELP?
    THANK U :)

    Hi the apprentice 85,

    Remember to make changes to the computer before that happened?

    Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

     

    Step 2: Put the computer to boot to determine which program is causing the problem

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "SymSetSymWithAddr64 not found in the dynamic library DBGHELP.dll.

    Hello

    Recently, whenever I start up my office, I get the message «SymSetSymWithAddr64» found in the dynamic library DBGHELP.dll  Please advise?

    What do you mean by "old in sys32 dbghelp.dll?

  • The 62 ordinal not found in the dynamic library CSCDLL.dll

    I get this message every time I open adobe acrobat: the 62 ordinal could not be located in the dynamic link library cscdll.dll. I am running Windows Vista Home Premium SP2 32-bit on an HP desktop. I get a message for a few months. Made sure that Windows and Acrobat is up-to-date.

    Hi BP69,

    ·         When the issue occurred?

    Follow these steps and see if it resolves your problem:

    Method 1:

    Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

    The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

    So if you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

    Method 2:

    Scan your computer for viruses using your antivirus software or online a scanner to flush out them (as appropriate).

    http://OneCare.live.com/site/en-us/default.htm?keyword=scannerhome

    Method 3:

    Start your machine in "safe mode with network" and check if the problem persists.

    Safe mode with networking

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Method 4: I recommend you perform the clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    I hope this helps.

  • Error message ordinal 1265 could not be located in the dynamic library IML 32 dll linl

    original title: error message
    Can anyone provide the solution for "1265 ordinal not found in dynamic library IML 32.dll linl. I'm trying to load a disc with a number of speed up the programmes on this subject. Thanks for any help

    Hi David77Mad,

    1. did you of recent changes on the computer?

    2. not the problem only occurs when you use a particular disc?

    Method 1

    Iml32.dll file is a component common to basic applications and created on former Macromedia Shockwave, now known as the Adobe Shockwave.

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.

    Method 2

    If the previous step fails, then I suggest that you uninstall adobe shockware and check if it helps.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

  • installed the plug-in for adobe cs4 3rd part. When I open the plugin I get an error saying _CFBundleCopyFileTypeForFileData of procedure entry point is not found in the dynamic library CoreFoundation.dll. This can be corrected?

    Adobe photoshop cs4 with 3d invigorator plugin zexworks

    Hi brush jamie.

    Welcome to the Microsoft Answers site!

    You may need to contact the Support from Adobe to see if they have a fix for it. Follow the link below the disclaimer to access using Adobe:

    http://www.Adobe.com/support/

    Hope this information was useful.
     
    Concerning

    Varun j: MICROSOFT SUPPORT

    Visit our Microsoft answers feedback Forum

    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us

    know what you think.

    NOT MS. LINK:
    Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  • Error, "the point procedure entry SUnMapLS_IP-EBP_28 be found in the dynamic library KERNEL32.dll." during installation "manufacturer of T-Shirt Hanes.

    Original title: Point of entry not found

    I'm trying to run an old program, Manufacturer of T-Shirt Hanesand get the error, "the entry point of procedure SUnMapLS_IP-EBP_28 not found in KERNEL32.dll dynamic link library.
    I'm running Vista 32 bit.
    Any help would be greatly appreciated.

    Hello

    1 see if that helps you.

    Right-click on the setup.exe > and then select run as administrator to install it.

    2. ask the manufacturer to program if it is Vista Compatible.

    We can not help you with that that Microsoft no longer has the link Vista Compatibility Center available.

    3. If the program is not Compatible Vista, install in Windows Compatibility Mode

    "Using Windows 7 or Vista Compatibility Mode.

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    See you soon.

  • The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic library SQlite3.dll

    Hello

    My computer shows the message above to start...

    Pleaseadvise I must dotorectify the error...

    SQlite is not a Microsoft program.

    It is used by other programs such as Firefox and iTunes.

    You should be able to determine which program is causing the error by disabling the Start Up items unit you no longer receive the message. Use WIndows Defender to disable start-up programs: http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts

    If your antivirus to stop Windows Defender running, proceed to step 4 of this article: http://support.microsoft.com/kb/929135

    The most likely explanation is a program from Apple. This thread can give you the solution:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/SQLite3-Wal-checkpoint-can-not-be-located-in/8b31c2b3-67cb-440C-B39B-4792c77c7eea?msgId=976f379e-f6ab-474B-b6bd-df7fdea0341f

  • Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

    Original title: error Ordinal 62
    I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

    Hello

     

    You can try the following steps and check.

     

    Method 1:

    Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

    The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

    If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

    Method 2:

    You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 3:

    You can also perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    You can also check the following thread link and check.

    WARNING 62 Ordinal not found in cscdll.dll

  • THE 139 ORDINAL COULD NOT BE LOCATED IN THE DYNAMIC LIBRARY IERTUTIL. DLL ERROR

    Original title: THEORDINAL139COULDNOTBELOCATEDINTHEDYNAMICLIBARYIERTUTIL. DLLERROR

    THEORDINAL139COULDNOTBELOCATEDINTHEDYNAMICLIBARYIERTUTIL. DLLERROR

    Hi Ludjo,

    If I understand correctly, you get the error "the 139 ordinal not found in the library iertutil.dll dynamics." I would like to know more information on the issue, so that we can help you.

    1. Once you get this error code or error message?

    2 have you made changes on the computer before this problem?

    3 are you facing this problem while starting or closing of Internet Explorer?

    If you get the error "the 139 ordinal not found in the library iertutil.dll Dynamics", then I would suggest trying the following methods and check if it works for you.

    Method 1:

    Check if the problem persists in the clean boot state. Place the computer in a clean boot state will help you determine whether the problem is caused due to possible conflicts of program/third-party application.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135
    Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.
     

    Method 2:

    Run the Analysis System File Checker and verify.

    See the following article from Microsoft to scan System File Checker.

    How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

    Please respond with the State of the question, so that we could help you better.
  • ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

    The next problem is generated when you try to download a book from the public library.

    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

    The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

    I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

    1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

    2. expand the Explorer open the file - go up to the OS (c)-

    -go to Program files (x 86) - enlarge

    -to enlarge Adobe

    -go to Adobe Digital Editions and the left click.

    -On the right part of the screen right click on Digitaleditions.exe.

    -Pop - up menu - on the left, click PROPERTIES

    -Pop up to select COMPATIBILITY

    -at the top of the menu compatibility, choose the resolution of compatibility issues run

    -Pop up to select the troubleshooting program

    -Pop up choose the program worked in earlier versions of windows, etc.

    -on the left, click NEXT

    -POP up - which version etc? Choose that I don't KNOW

    -on the left, click NEXT

    -POP - up - left click Test Program-

    -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

    3. ADE open - make sure ADE is in library view.

    -Left click on FILE and then select Add to LIBRARY from the menu drop down.

    -POP UP - down to the right to choose the type of file of social mobilization

    -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

    -Select the file of the CMHA in the right side of the window and on the left, click OPEN

    -It should work, but you have to go through the whole routine if you close ADE.

    I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

  • the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

    Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
    Error messages have been
    (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

    A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
    Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
    All solutions?

    I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

    Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

  • Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

    Original title:

    I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

    Hello

    1. are you able to connect next to this error?

    2. are you aware of any changes made to the computer, before the show?

    Method 1:

    Step 1: Safe Mode

    Start your computer in safe mode and check the number.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Method 2:

    Run a SFC system analysis and control for the issue.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    Follow these steps.

    a. open windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Apple Application Support

    b. copy the file "libxml2.dll.

    c. open new windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Mobile Device Support

    d. Paste the file 'libxml2.dll' at the location.

    e. restart your computer.

    I hope this helps.

Maybe you are looking for