REGZA WL66: HDMI input has stopped working

Hello

the HDMI to my Regza WL abruptly arrested two weeks after having worked well for several years of work. Previously, the different types of devices have been recognized without any problem: DVD player, receiver, laptop, Media Player. Now, no device is recognized at all, the screen remains blue.

The cable is not the problem. I tried with different cables and also tested the cable with the other monitors; they are ok.

Is it possible to fix this?

(The SCART and component input still works - but is not HDMI).

Thanks in advance for any ideas.
Sundowner

I ve checked a bit for this laptop model specification and I discovered that this TV has two HDMI ports.
Have you noticed the same problem with two HDMI ports?

Tags: Toshiba

Similar Questions

  • HDMI sound has stopped working - dv9266ea

    Hey!

    I have a laptop dv9266ea with WinVista Home Premium and a few 1-2 months ago my sound does not work as it should. We used to be able to plug the laptop to our TV using a HDMI cable and change the sound default and everything was good, but now we have not any sound at all more. Photo is excellent as usual.

    Are more people who has the same problem, so it might be because of some update somewhere here? Or anyone knows of another solution?

    Never mind. Swedish support couldn't give me an answer. American support couldn't give me an answer. 2 times I had the mother exchanged at just 1.5 years (the last time they destroyed the volume controls and said that they didn't fix it for me, even if they one wrecked at HP), and my brother had his mother traded 3 times on a similar model.

    HP seems to suck. I'm going to buy a new laptop to mark another in a few weeks and then it goes in the trash. I lost the way a lot of time and money because of all it's flaws and time away for repair.

    Solution: Trash and get another brand.

    Message edited by LordMagnus on 02/06/2009 12:38 AM

  • Input HDMI Sony Bravia KDL-40BX420 of connected PC has stopped working

    I used my laptop to my Sony Bravia TV using the HDMI ports for more than two years without problem. I unplug it and plug it back on a regular basis without problem. I have returned from a weekend out of town and plugged my laptop back to and kept getting the error on the TV:

    No signal. Check the external source or select another entry with the ENTER key.

    TV:

    Sony Bravia KDL-40BX420

    Laptop:

    HP Pavilion G6 with graphics Intel HD Graphics 3000 with the latest drivers (Intel HD Graphics driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347), 8.1 for Windows 64-bit

    What I tried:

    • Tried it with 3 different HDMI cables (without success)
    • Tried connecting Player DVD TV HDMI ports (successful, plug-and-play)
    • Tried to connect the PC to another TV with cable HDMI listed above (successful, plug-and-play)
    • Tried to reset the TV to factory settings (reset successful, still no PC signal)
    • I tried power reset on the TV (unplugged for a few minutes, connected again, no still no PC signal)
    • Tried to reinstall graphics drivers of PC (Intel HD Graphics Driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347, Intel, installation successful, website still no PC signal)
    • Tried to install the latest graphics drivers from the manufacturer's Web site (Intel high definition (HD), pilot chart, v9.17.10.2843, from the HP website, successful installation, still no PC signal)
    • Tried different resolutions video on the PC, exit in double...
    • Tried different boot sequence, with mixed results:
    • Turn on PC the sound on the TV: no signal.
    • Turn on TV that the sound on PC: I see the logo of the 8 on Windows with white turning points on the TV (double on the PC screen and before arriving at the Windows login screen TV turquoise rounds with the error 'no signal'.) So the HDMI works, but only for a short period of time during the boot sequence for Windows.
    • I tried restoring the system to a restore point not go a week ago (HDMI to TV works well all week), no chance. Still no TV signal, and the PC keyboard has stopped working too. That challenge.

    I'm out of options. Help would be very appreciated. Please just keep in mind that he has worked for more than two years without any special configuration. Just plug and play, as it is supposed to.

    Thanks in advance

    have you tried to connect via HDMI port on your TV?

  • accessory Input Panel has stopped working

    When I try to open Input Panel, I get a popup window plowed "Microsoft Windows" that says "Tablet PC Input Panel accessory has stopped working a problem caused the program blocking works.» Windows will close the program and notify you if a solution is available. "When I click on"Close program"window pops up again and runs to the pop-up until I restart. It started to happen after I installed several upgrades to Windows Vista. Restore to a date before that these updates has not helped. I use a Fujitsu Stylistic 5112 Vista Business Sp1. How can I fix it? THX. Nelson D Hochberg

    Hello thenelson,

    Thanks for choosing Microsoft answers Forum!

    It looks like you may have a corrupted file or two.  You can try which is in the following article:

    It repairs the corrupted file vista settings.

    http://support.Microsoft.com/kb/929833

    If this does not work you can try doing a clean boot is the process described in the following article:

    http://support.Microsoft.com/kb/929135

    Please give me your comments on what is happening.  I have another suggestion if it does not work.

    I hope this information helps.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When upgraded to windows 8 hdmi has stopped working, ATI driver driver HD 5000 series no longer works

    Hi here is my setup:

    Laptop: graphic Driver HP TM2-2000el, OS Windows 8 Pro, ATI Mobility Radeon HD 5000 series.

    Problem: When I've upgraded to Windows 8, the ATI graphics driver has stopped working, actually it works with the intel HD built in driver. In fact, I can't send the HDMI signal to my TV. I downloaded the last Catalyst AMD released on April 24, 2013, the regular and the beta version, but do not work. On the Device Manager error code 10 (impossible to boot the machine).

    If someone has worked on this problem of wrong answer please

    Problem solved with this driver:

    http://leshcatlabs.NET/index.php/2012/12/leshcats-catalyst-12-11-Beta-11-unifl-WIN8/

  • "Userinit logon application has stopped working".

    I have Vista Home edition Prem, and be recetnly when I start the computer, the ERROR "Userinit logon application has stopped working".  There is a similar question to this topic, but it was useless.  Assistant would be appriecated.

    Thanks

    Hi Marcosball21

    Welcome to the Microsoft Vista answers Forum!

    This problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

    I suggest measures are:

    Start the computer in safe mode and try to make these changes in the registry:

    Important: The instructions below contain steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    1. how to back up and restore the registry in Windows

    i. log on the computer as an administrator or by using an account that has administrative permissions.

    II. start the registry editor. To do this, click on start to reduce this top, type regedit in the search box and press ENTER.

    III. click on continue.

    IV. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

    v. in the right pane, right-click Userinit, then click on modify.

    VI. in the value data box, type drive: \Windows\System32\userinit.exe and then click OK.

    Note The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

    VII. close the registry editor.

    Link check: when you try to log on to a Windows Vista-based computer, briefly, you receive the "Welcome" message, and then logged on http://support.microsoft.com/default.aspx/kb/929825 if you are unable to start the computer in safe mode and then start from the Vista DVD and the Editor window registry opened the command prompt. Follow the steps

    i. Insert the VistaDVD Windows and restart the computer.

    II. When you receive the following message appears, press a key:

    Press any key to start from the CD or DVD.

    III. define the following preferences and then click Next:

    o language to install

    o currency and time formats

    o keyboard or input method

    IV. click on repair your computer and select the operating system you want to repair, and then click Next.

    v. in the recovery option, select command prompt

    VI. in the type of command line in Notepad

    VII. in Notepad, click file, select open

    VIII. Select drive c:

    IX. Select all files

    Select Select regedit Windows x.

    XI. right-click regedit and select open

    Back up the registry and follow step 1

    Hope this information is useful.

    Let me know if it worked.

    All the best!

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • ArcSoft Daemon has stopped working

    For several weeks now I get an error message whenever I start my computer.

    "Arc Soft connect Daemon has stopped working".    'Microsoft is working on a solution and will inform you with a result' (this part is not the exact wording).
    Why this is happening and how can I get rid of this or repair.
    Thank you.

    Hello

    Published by Marilyn here

    "Click on the Start button. In the start search box, type Msconfig. Then click on the Startup tab.
    If you have any input to Arcsoft, then disable and see if that gets rid of the error at startup.
    If you have more than one program of Arcsoft, turn off one at a time to test them to see which comes the error. »

    Fail with it, try to boot minimum troubleshooting to find the offending program.
    929135 - how to solve a problem by performing a clean boot in Vista or Windows 7:
    http://support.Microsoft.com/default.aspx/KB/929135

    When you identify the troublesome program you can (1) search an update for the program that could solve the problem or (2) uninstall the program.

    Don

  • Windows Installer has stopped working.

    Whenever I try to install anything I get this: "Windows Installer has stopped working".

    Problem started yesterday or today. Don't know if this has nothing to do with what's going on, but the computer had a blue screen when running a scan with Norton antivirus.

    When I entered msiexec /? I get the same thing: "Windows Installer has stopped working".

    -----

    Also if I go here C:\Windows\SysWOW64 perform msiexec.exe it I get this:

    Windows® Installer. V 4.5.6002.18005

    msiexec/option [optional parameter]

    Installation options
       
    Installs or configures a product
    /a
    Administrative installation - installs a product on the network
    /j [/t ] [/g ]
    Publishes a product - m for all users, allows the current user
       
    Uninstalls the product
    Display options
    / quiet
    Quiet mode, no user interaction
    / passive
    Automatic mode - only progress bar
    / q [n | b | r | f]
    Sets the user interface level
    n no user interface
    b Basic UI
    r reduced UI
    f-full UI (default)
    / Help
    Help information
    Restart options
    /norestart
    Do not restart after the installation is complete
    /promptrestart
    Prompts the user to restart if necessary
    /forcerestart
    Always restarts the computer after installation
    Logging options
    / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
    i status messages
    w warnings recoverable
    e-all error messages
    a startup of actions
    r registers of the specific action of the
    u user requests
    c initial UI parameters
    m out-of-memory or fatal exit information
    o disk out-of-space messages
    p - Terminal properties
    v performance
    x extra debugging information
    + - Add to the existing log file
    ! -Flush each line in the log
    * - Log all information, except the x and v options
    / log
    Equivalent of / l *.
    Update options
    / Update [; Update2.msp]
    Apply updates
    / uninstall [; Update2.msp] / package
    Remove the updates of a product
    Repair options
    /f [p | e | c | m | s | o | d | a | u: v]
    Repairs a product
    p only if the file is missing
    o If the file is missing or an earlier version is installed (by default)
    e If the file is missing or an equal or higher version is installed
    d if the file is missing or a different version is installed
    c If the file is missing or checksum does not match the calculated value
    has all the files to reinstall the forces
    u all (default) user-specific registry entries
    m all requirements (by default) computer-specific registry entries
    s all (default) shortcuts
    v-runs from source and recaches local package
    Setting public properties
    [PROPERTY = PropertyValue]

    Consult the SDK Windows® install to get additional documentation on the
    command line syntax.

    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Independent JPEG Group.

    ---------------------------------------------------

    However if I go in "C:\Windows\System32" and run the msiexec.exe which is where I get:

    "Windows Installer has stopped working".

    And another window that says:

    "The application could not initialize properly (0 x 0000005). Click OK to close the application.

    ----------------------------------------------------

    Edit:

    I went to HKLM/System/CurrentControlSet/Services/msiserver

    By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

    I was able to install only certain programs.

    I was able to install the rescue of the music. But I wasn't able to install iTunes 9.2

    -------------------------------------------------------------------------

    I am running Vista Home Premium:

    Version: 6.0.6002 Service Pack 2 Build 6002

    64 bit

    How can I fix it?

    Haha. Thank you Michael.

    But I have to able to do work properly now. I'll post any major change (that I remember), just in case where someone wants to try what I did.

    ---------------------------------------------

    I deleted everything I could in my temporary files.

    Then I went "HKLM\System\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations" and cleared the entries.

    I went to HKLM/System/CurrentControlSet/Services/msiserver

    By then replaced the key 'ImagePath' '%systemroot%system32\msiexec/v' '%systemroot%SysWOW64\msiexec/v '.

    Restarted my PC

    HKLM/System/CurrentControlSet/Services/msiserver/ImagePath change back to "%systemroot%system32\msiexec c".

    A run "cmd" and input "msiexec /unreg" then he walked "msiexec/regserver".

    My PC rebooted again

    Profit :D

    Worked for me.

  • Logitech USB headset mic has stopped working

    Windows 7 - headset stopped working suddenly

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    About 5 days ago my Logitech USB headset microphone has stopped working.  The helmet always plays the sound, but the microphone is not input all the sounds.

    Things I've done:

    -Uninstalled / reinstalled the Driver Headset, USB Drivers, & sound card driver.

    -helmet I tried on another pc (it worked)

    -tried headphones different USB on my machine (a no exit worked / entry)

    -tried headphones with input jack then the sound card. (has no output worked / entry)

    -bought a new sound card and used the headset with Sockets (has no output worked / entry)

    -tried all the possible configurations of devices of entry & exits in my sound options (nothing worked)

    -Re-enabled the sound card integrated and connected only (output worked / entry has no)

    1 odd thing happens.  If I smack physically the pc microphone picks up which leads me to believe that somewhere the sound is just set really low rather than not working do not at all even if I turned upwards never slider that I can find to max volume.  I get no error.  Nothing has changed recently with my pc.

    Technical support of Logitech said simply that my 500 DSP is no longer supported in the version of Windows 7 SP1.  Logitech provides no drivers, etc except through Microsoft.  Microsoft web site shows incompatible.

    But after going through Control Panel/convenience store, he started working for the micro and headphones.  Hooray!
  • How can I fix windows 7 Catalyst control center host application has stopped working

    I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.

    I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

    How to solve the CCC is not loading/opening at initialization.

    Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

    Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

    Resolution: this solution has been tested - reproduced and resolved.

    Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

    -Remove all ATI C:\programs files files and the C:\programs files (x 86)

    -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

    -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

    -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

    -Close and restart normally.

    -Reinstall the ATI Catalyst package.

    I hope that you will get in working order!

  • Catalyst Control Center: Host has stopped working

    Whenever I start my old Toshiba laptop computer for 3 years, I get this message: host of Catalyst Control Center has stopped working and then nothing. I check the current update drivers says it all day, but I went on this site called Driver Whiz and he says I'm wrong 8 things with my computer Says: Standard AHCI 1.0 Serial ATA Controller... out of date... then 2 ATI HDMI Audio... updated... then system devices said ATI 1/0 5 MB... updated... communication processor and then disconnected devices : 4 JMB38X MS Host peripheral COntroller is disconnected, but they want 50 buck for them to fix it when I downloaded what I thought was that it was free so now it's on my computer... UGH!

    My LT is a Toshiba Satellite A665D

    OS: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1

    Processoer:AMD Phenom (tm) II P920Quad Core (4 CPUs) processor clocked at 1.6 GHz

    BIOS: 19:13:52 VER: 08.00.0

    Memory: 4096 MB Ram

    DirectX 11

    I am running Iolo System Mechanic 11 on my machine for detection of spyware, malware, viruses and been with them for 5 years and this has NEVER happened since I was with them. My Toshiba Service Station does not work and tried to contact Toshiba as well, but yet they want the money for technical advice. I know that somebody here is tech savey and I am disabled and do not have the money to repair this laptop so please can someone there give me info on how to get back to his old self of my machine? Oh and btw, I did a system restore, but this message from Catalyst Control Center is yet to come. PLEASE HELP ME AND THANK YOU VERY MUCH!

    "I went on this site called Driver Whiz and he says I'm wrong 8 things with my computer.
    Don't believe one thing, or say similar sites. They are only after your money.
    To top it off they often install software that can be difficult to uninstall, and if
    you don't uninstall it you get messages.
    It seems that there are a lot of discussions about uninstalling the program driver Wiz, but I
    guess the best place to start is to their own site-

    http://driverwhiz.com/support/uninstall
    If that won't uninstall not indeed their software, then you may need to do more
    read other threads.

    "Microsoft downloaded as 13 updates when I turned off my computer.

    I hope that you do not say that you stop the machine while the updates were
    installation. If none simply let problem Windows updates check again and select only a little at a time and let it install, go to learn more. Avoid also the 'Optional '.
    updates, particularly of driver updates.
    In regard to it and the fake driver software installed. If you started having problems after that Windows updates don't you have a restore point from the system that dates back to before that you did? If so do the system restore and then move on the updates again. Restoration can even delete 'wiz pilot' with a bit of luck.

    Now - 'Catalyst Control Center host has stopped working"I suppose you were
    get this error before the debacle "Pilot Wiz"?
    I uninstall the drivers ATI and the CCC software via programs and features and then go to the download page of Toshiba for new drivers. It can be pilots became corrupt, but the "updater" does not know this. It checks only to a version of file.
    Personally, I do not use updates of autopilots. Best to download the installer and install manually, if Toishiba have this option.

    With FB game, you will also want to put Flash Player to - day
    Adobe - Adobe Flash Player Install
    Shockwave-
    Adobe - Adobe Shockwave Player

    .

  • my iPhoto has stopped working

    My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

    What version of OS X (or, if all goes well, Mac OS) are you running?

    What version of iPhoto do you run?

    iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

  • Click force has stopped working

    Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

    I have checked all the options, rebooted the system, still no clear sign of what is the problem.

    Does anyone have the same problem? How to check weather force/pad touch works well?

    Any suggestions what to do?

    A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

    iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

    After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

    Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

    Possible only "close program"...

    Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

    All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

    Checked the event viewer:

    1. error message:

    Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

    Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

    Exception code: 0xc0000005

    Offset: 0x004f0e09

    ID of the process failing: 0xcc4

    Start time of application vulnerabilities: 0x01d218b3194e2f01

    The failing application path: C:\Program Files\iTunes\iTunes.exe

    Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

    Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

    2. Windows Error Reporting

    Fault of type 1024926102, bucket 25

    Event name: APPCRASH

    Answer: No available

    Cabin ID: 0

    Signature of the problem:

    P1: iTunes.exe

    P2: 12.5.1.21

    P3: 57cfb09f

    P4: WebKit.dll

    P5: 7602.1050.4.5

    P6: 57c11f7f

    P7: c0000005

    P8: 004f0e09

    P9:

    P10:

    Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support

  • iMovie has stopped working since iOS 10

    iMovie has stopped working since iOS 10

    Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it

    Hello iMovie does not work,

    After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
    I recommend you read these articles, there are a few things that we can try to get the application running again.

    Force an application to close on your iPhone, iPad or iPod touch - Apple Support
    Restart your iPhone, iPad or iPod touch - Apple Support

    If an application you have installed unexpectedly closes, unresponsive, or will not open - Apple Support

    Thank you for using communities of Apple Support. Good day.

Maybe you are looking for