Reinstall required for ATI Catalyst Control Center after the upgrade to Windows 8

Similar Questions

• Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

  Hello

  I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
  My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
  I bought Need for Speed Carbon and installed on my laptop.

  When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
  I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

  I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
  Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
  He said that the driver is installed and system must be rebooted.

  Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
  How can I solve this problem?

  Sorry for the long letter,
  Thanks for the help.

  Hello

  As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
  You can try to use the omega site ot driver drivers Toshiba orginal...

  @aportakal
  Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

• Solution for Webcam sleep & back problems after the upgrade to Windows 7

  Just thought I'd share the solution I recently found a problem I've had since a Satellite Pro A200 GE 26 Q of the upgrade from Vista to Windows 7.

  I installed the software webcam for windows 7 on the toshiba site and built-in Chicony camera would work very well after a reboot, but if the computer is in sleep for a long enough period, the unit would stay asleep when the computer woke up and wouldn't work at all, unless the computer has fully restarted.

  The solution lies in a change in the registry to force the computer to update the webcam USB controller is attached, after the release of sleep. It was apparently the default for Vista when it was released, but was changed in Vista SP1 and Windows 7. Designed for Vista original material which did not have its drivers/registry updated entries could therefore be subject to a failure because of changes to the default settings through the updates of windows. Toshiba, it seems, do not think that this issue then of the extinction of the registry fix for Win7 upgrades for the satellite Pro A200. Therefore fix manually.

  The article where the solution is here: [http://support.microsoft.com/kb/928631]

  You do NOT have the file of the fix, you must only make the change to the registry described later.

  You need turn on the camera while you do the following to make sure that it appears in Device Manager correctly.

  Step 1: Determine the specific USB host controller

  
  # Click on * early *, enter devmgmt.msc #the * search * box, then click on * devmgmt.msc* in the * list of programs.
  # The * view * menu, click on * devices of * connection *.
  # Expand the processor node. For example, expand * ACPI * Multiprocessor PC *. (In my case, * ACPI x 86 based PC) *.
  # Extend * system compatible ACPI Microsoft *.
  # Extend * PCI Bus *. Several USB host controllers will be listed.
  # Expand each USB host controller node, and then expand successive subnodes until you find the name of the device that is failing. For example, the device entry might look like the following: ACPI Multiprocessor PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB Universal Host Controller - drive root Hub\fingerprint 2830\USB * (Note: for me, I found the webcam to ACPI x 86 PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB2 Enhanced Host Controller - 283A\USB Root Hub + USB Composite Device\Chicony USB 2.0 Camera-based) *.
  # When you have located the device, right click on the associated and then USB host controller click on * properties *. In the example that is listed in step 6 you would right-click * Intel(r) ICH8 Family USB Universal Host Controller-* 2830, then click on * properties *. (* Again, for me it was different - ICH8 Family USB2 Enhanced Host Controller - 283 a *).
  # Click on the * details * tab.
  # Select * pilot key * in the list. The driver key will look like the following. Note the last four digits of this driver key. {36fc9e60-c465-11cf-8056-444553540000} \0002 * (on my system it's: (36fc9e60-c465-11cf-8056-444553540000) \0005*).
  
  
  

  Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

  
  # Click on * early *, type regedit #in the * search * box, then click on * regedit.exe* in the * list of programs.
  # Find and then click the registry subkeys that are similar to the following: * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class{36FC9E60-C465-11CF-8056-444553540000}\Four-digit_number.* in this step, the numero_a_quatre_chiffres is a placeholder for the USB devices in the system.
  # You must search the registry subkey by using the value that you noted in step 9 above. For example, if the key of the pilot to step 9 is * {36fc9e60-c465-11cf-8056-444553540000} \0002*, then you need to get * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class {36FC9E60-C465-11CF-8056-444553540000} \0002. (For me, as mentioned above, this was \0005 (36fc9e60-c465-11cf-8056-444553540000)). *
  # On the * Edit * menu, point on * New * and then click on * DWORD value *.
  # Type# * ForceHCResetOnResume * to the name of the DWORD and then press ENTER.
  # Right click * ForceHCResetOnResume * and then click on * edit *.
  # In the * boite box the value data, type# 1 and then click on * OK *.
  # Exit the registry editor.
  # Restart the computer.

  This fixed the problem for a long time for me. I'm writing this in case it helps someone else who has the same problem. If anyone from Toshiba never reads this, you might consider adding the registry fixes for upgrades of windows 7 on the download page for this & all other models affected.

  Big Hey what s announced and detailed, thank you! :)
  I m wondering how you discovered it.

  But I want to add something: before you make or change something in the Windows registry, make a backup of it. In the worst cases, restore you the old Windows registry. Just to be sure ;)

• ATI Catalyst Control Center for windows 8 pro updates

  I need the ATI Catalyst Control Center updates for my 8 Professional window.

  I have the Sony laptop

  Hello Kenvnus,

  Welcome to the community forums of Sony.

  What model Laoptop do you have?

  If you are not sure, read this guide to find out where to find the model #.

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264#notebook

• dv7t-6c00Quad installed Win8Pro (final version) & ATI Catalyst Control Center fails

  My laptop is the dv7t-6 c 00 Quad and I just installed the version of Windows8 Pro (I am a member of MSDN Developer).

  Everything went fine EXCEPT the ATI Catalyst Control Center does NOT work.  I tried to reinstall the graphics driver (sp55098.exe), but it won't work because it does not "meet the minimum requirements" (which I assume means that it has not been updated to handle Windows8.

  The result is that my system has become unstable. I guess that's because the control center would deal with switching between low power and high power/performance chipsets.  I noticed that this change can occur on the fly and seems to have with a web browser (Internet Explorer).

  It's REALLY BAD, because it crashes my system.

  Please respond and tell me that there is a SOLUTION NOW!

  * Notes: I tried to launch Catalyst Control Center and get this message, "Catalyst Control Center cannot be started.  There are currently no parameters that can be configured using Catalyst Control Center".  AAARGH!

  Tom

  It's the definitive answer to AMD.  HP must deliver the updated for my portable operarting under Windows8 Catalyst drivers.  I hope it will be soon.  In fact, I'd be happy to beta test.

  Here is the answer from AMD:

  Dear Thomas,

  Your service request: SR #{ticketno: [8200508926]} has been reviewed and updated.

  History of application of Service and response:

  As AMD only provides the reference for laptops drivers (provided as-is with limited support), sometimes our software is not compatible because changes made to the graphics card from the laptop manufacturer to improve stability and performance in the laptop. The error you receive indicates that the Radeon card in your laptop is incompatible with our drivers, since the manufacturer of your laptop has changed the Radeon card enough such that our drivers will work with your product. As such, you will need to contact HP for pilots and support to download and install. We will have all the drivers for your system that will be compatible, you will be forced to go with HP. We apologize for any inconvenience this might cause.

• ATI Catalyst Control Center 8 problem Windows

  Hello, I upgraded my ph Pavilion g series at windows 8. But now when I start it, I get the error message that ATI Catalyst Control center needs to be reinstalled. I tried a bunch of times but he returns (reinstalled, tried updates of the ATI site, nothing helps, he said: my driver is correct)

  And second, when I start it just sometimes gives a gray screen (and then I press the power button for 5 seconds to close). I think it might be related to my problem of graphics card. I'm a patient person, but I'm a little scared because I have a feeling I won't take long for my laptop to fi serious accident I have to keep doing this.

  Someone at - there of collaborative for these 2 problems I have?

  Thank you!

  Delabarre

  Hello

  Welcome to the Microsoft forums.

  You have installed the latest driver after uninstalling the driver?

  I suggest also refer to the suggestion from me from following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/Catalyst-Control-Center-failure/de8882d9-c5f7-4916-A94F-7e52582f351b

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Satellite L840/020 - need to re - install ATI Catalyst Control Center win 8

  I get a message from the program compatibility Wizard the I need to reinstall ATI Catalyst Control Center.

  I went to their website and it said computers laptop Toshiba would need to get this information from Toshiba.
  I can't find this download.

  My graphics card is the Radeon of AMD 7670 M
  Satellite L840/020
  Reference No.. PSK8LA-020007
  Windows 8 Pro 64 bit

  It of Australian model for Toshiba laptop.
  Therefore, you should find these drivers on the support page for the Toshiba driver to THE:
  http://www.MyToshiba.com.au/support/download

• ATI Catalyst Control Center popping up a warning

  Problem with the ATI Catalyst Control Center popping up a warning whenever I connect

  Whenever I login I get a pop up with this message: ATI Warning: The Catalyst Control Center is not supported by the 28octobre your compatible graphics driver. Please update your ATI graphics driver or card from ATI enableyour using the display manager. I went to the display manager but could not know where or how to turn the ATI card. This message has just started to appear about two months after I downloaded some windows updates ago and signed on. I am running Windows Vista Raedon HD 2400 PRO.

  Hi waters choppy.

  See the link below for a thread on the forums of AMD with a similar question, try steps mentioned them.

  http://forums.AMD.com/game/messageview.cfm?CATID=260&ThreadId=105228

  If the previous step fails then uninstall all the drivers of graphics card and software the computer later download the updated driver for the site Web of AMD and check.
  http://www.AMD.com/us/products/desktop/graphics/ATI-Radeon-HD-2000/HD-2400-Pro/pages/ATI-Radeon-HD-2400-Pro-series.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ATI Catalyst Control Center simplified view do not support active graphic processor

  When I start the CCC, I get "features in the ATI Catalyst Control Center basic view do not support active graphic processor".

  I'm using ATI (not Intel).

  Driver is showing only: Version 8.633.0.0
  ATI Mobility FireGL V5700

  pci\ven_1002 & dev_9591 & subsys_212717aa

  System BIOS: 3.11 (2009-11-19)

  W500 4058-CTO on WinXP

  Uninstall-reinstall CCC and or the driver does not help. How can I fix CCC?

  Thank you

  Rick

  Now corrected to my laptop an error of ATI Catalyst Control Center.

  I had given up the uninstall/reinstall and register pluck and sweep, so I ran Intel graphics all the time.

  I voted against reinstall .NET 3.5, 3.0, 2.0... as I didn't aggravate and lose even more time, since I have a working machine.

  The other day the matrix Driver Lenovo had a video update.

  V8.712 - 100302 b - 097094C

  Applying this version fixes my ATI Catalyst Control Center.

  If this will help someone in the future, here's my ATI Catalyst install Manager report Journal of Installation:

  Hardware information
  Name ATI Radeon Graphics Processor
  Manufacturer ATI Technologies Inc.
  Device ID 0 x 9591
  Vendor ID 0 x 1002
  Code of the class 0 x 030000
  Revision ID 0x00
  ID subsystem 0 x 2127
  Subsystem vendor ID 0x17aa

  Existing packages

  Packages for installation
  Catalyst Control Center
  Final status: success
  Version of the article: 2010.0302.2233.40412
  Size: 150 MB

  ATI Catalyst Install Manager
  Final status: success
  Version of the article: 3.0.765.0
  Size: 20 MB

  ATI Display Driver
  Final status: success
  Version of the article: 8.712.0.0000
  Size: 40 MB

  Microsoft .NET Framework Version 2.0
  Final status: success
  Version of the item: 2.0.50727.42
  Size: 22 MB

  Microsoft Visual C++ 2008 SP1 Redistributable
  Final status: success
  Version of article: 9.0.30729.4148
  Size: 6 MB

  Now, that brings me to the initial problem of refresh of the external monitor around rate not exceeding is not 60 Hz. (subject for another thread)...

  http://forums.Lenovo.com/T5/W-series-ThinkPad-Laptops/W500-external-monitor-refresh-rate-above-60Hz/...

• Uninstalling ATI catalyst Manager and ATI catalyst control center.

  So Im STILL, try to install windows 7, but honestly I am beginning to have some sort of fear. Its asking me to uninstall the ATI catalyst Manager and ATI catalyst control center. I was able to uninstall ATI catalyst not Manager control centering forest. I was wondering that if I have to reinstall them back and if so, how to do this. Is that going to affect my laptop, I seriously can't afford a new computer laptop im a student on a budget tight. Anyone can shed some light. Is it safe to actually upgrade, I contacted HP, and that's what they said.
  I want to just confirm that we do not recommend to upgrade the operating system, we do not support the operating system pre-installed and tested on your laptops.
  Its hardware is capable of upgrade to windows 7 but I want to just confirm that we do not recommend the upgrade if your laptop does not come with the windows upgrade option 7.
  Someone please help! Update affect my computer?

  Oh God, that doesn't sound so appealing to me. I think that just keep patient windowsvista. I had problems with installing wondows 7 since day 1, I think it's a sign. THANK YOU SO MUCH! You have been great. Seriously, thanks for your time and patience.

• Re: Satellite A300-1LT - impossible to install the ATI catalyst control center

  I can't install sound pretty boring - ATI catalyst control center. To be honest, everything works fine without it, but in a few days, I'll get HDTV, so I thought why not install now to check the options in it. I installed the latest versions of ATI drivers, choose the right system (vista 32 bit), but for some strange reason, I do not see anywhere, not in the start Panel, not in c-program files-ati tehnologices where its supposed to be installed.

  As I sad, I have no problem with my grapfic card, I just wanted to be able to play with the scope setting resolutions when my TV is used.

  I have the ati 3470 graphic card.

  Hi Hrvoje

  If I understand you right, you use now non - Toshiba ATI display driver. Am I right about that?
  I mean I don't think that Toshiba offers several versions of ATI drivers for your model laptop.

  Where you Born these drivers? On the Toshiba download page?

• Do I need ATI Catalyst Control Center to run Windows 8, the message says that it is not compatible

  I have a new Toshiba Satellite L840 computer that had installed so I used Windows 8 Upgrade Pro but he tells me that ATI Catalyst Control Center is not compatible Windows 7.  I had the option of UNINSTALLING ATI Catalyst Control Center, which I did but it tells me it has to be reinstalled and to go to my Center of Toshiba computer to download a compatible, but I found on the Web from Toshiba site?  It is necessary to have ATI Catalyst Control Center to run Windows 8?

  Hello

  Your machine will work fine with the Catalyst.

  You will not have access to some of the optional features\adjustments it provides however.

  There is a new version of catalyst to win 8 available at AMD\ATI that may or may not work, depending on the model of your graphics chip. If the model is 6 * or higher, it should work.

  I have not personally tried yet.

• ATI Catalyst Control Center

  I have a desktop HP TouchSmart has 520-1160. Just upgraded to Windows 8. He tells me that the Catalyst Control Center is not compatible with Windows 8.

  Where and how to change it?

  Thank you, Irene

  If a compatible version of Windows 8 of the "Catalyst Control Center" is available, it would be located in AMD Catalyst Display Driver. Download and install the "Catalyst Software Suite" to this download page.

  Please send Bravo

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!