Reinstall the Teredo tunnel map

Similar Questions

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How to reinstall microsoft teredo tunneling adapter driver, its showing 10 error code. pls help

  I hv hp pavilion dv6-2005ax, windows 7 32-bit, its display problem with teredo tunneling microsoft drivers, but when even after the end of troubleshooting it shows not installed driver, pls help how to install the drivers, its error code display 10.

  Hello

  Description of the error code 10:
  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  The cause of this error:

  One of the main causes for this is that the network adapter does not currently support this feature. You can download the latest driver / updating the driver for your network card or chipset and then try to uninstall and reinstall this component.

  I suggest you try the steps below and check if it helps

  Method 1: resolution

  a. click on start

  b. right click on computer

  c. click Properties

  d. click on Device Manager on the left hand side

  e. right click on the network card

  g. click on uninstall

  Also try to uninstall the card network programs and features

  Here are the steps to uninstall programs and features.

  a. click Start, type programs and features in the search programs and files box, and press ENTER.

  b. Click to select the product to uninstall from the list of installed products and then click Uninstall/Change in the bar that displays the available tasks.

  After you have uninstalled the network card, try to install the driver from the Microsoft Web site from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=4039727#N909

  Reference link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  Update the driver

  http://support.Microsoft.com/kb/943104

  Hope this information is useful.

• Teredo tunnel map

  Cannot install

  Hello
  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-install-Teredo-tunneling-pseudo-interface/754c8f29-3a87-4E77-Babd-a69c8910e17e

  It will be useful.

• with regard to the teredo tunneling adapter.

  I'm running on windows 7. My office just had re-vamped. Now I receive an error code 10. This could be to use a version of windows 8 in brains of windows 7?

  JBM

  If you're on a home network you can simply disable tunneling

  To disable tunneling

  http://blogs.msdn.com/b/richin/archive/2010/11/26/how-to-disable-Teredo-tunneling-pseudo-interface-6to4-adapter.aspx

  Open an elevated command prompt > type netsh interface terredo disabled state.

• Teredo Tunneling network driver. How to reinstall the missing driver?

  Description of the system: Vista Business; Trend Micro

  I was getting an error (triangle) in Device Manager and could not update the Teredo tunnel network driver, so I uninstallled thinking she would be automatically reinstall when I quit and restart. Unfortunately, he didn't like that. The pilot is now missing and I can't go online (I use another XP PC to write this note). PS: If necessary, I can have access to another PC in Vista Business.

  How can I go about restoring the missing driver? Thank you

  I called Technical Support from Microsoft (paying). It turns out that this 'Teredo nickname Tunneling (something)"card network is not necessary.  I plugged in the RJ45 on another port on my router and rebooted the PC. I now get access i.e. connectivity to the internet. I checked the Device Manager. It is no longer a "Teredo nickname Tunneling (something)" listed under "Network adapters" network card in Device Manager and I no longer get an error message about the Device Manager.  Detective Conan.

• TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

  My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

  Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

  As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

  I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

  This left me confused.  If there is a problem with this device, no solution seems to exist.

  Any help that will allow my laptop to function normally is welcome.

  I understand that you want to know if the teredo adapter can cause performance problems.

  The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

  This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

  If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

  Furthermore, does this happen that the adapter is connected or not?

• How to install Teredo Tunneling Pseudo-Interface

  Dummy me... In Device Manager, I uninstalled the Teredo Tunneling pseudo-interface. I need to know how to reinstall this interface. I've seen the other reviews on the web on how to set it up, but all those who assume that the interface is still visible in Device Manager.

  So where can I find the procedure to install this?

  I'm on Windows 7 Professional x 64.

  Thank you

  You have enabled the option - Show hidden devices ?

  Device Manager > view > CHECK show hidden devices.

  Expand the network adapters

  Microsoft Teredo Tunneling adapter is it listed?

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• Microsoft teredo tunneling adapter driver

  On the control panel devices, I need drive device for a teredo tunneling adapter microsoft. When I left difficulty device driver, it fails.

  Hello

  ·         What exactly are you trying to do?

  ·         You will remember to do recent changes on the computer before this problem?

  If you try to update Microsoft teredo tunneling adapter driver. I suggest you follow the steps mentioned below:

  Method 1:

  You can check after uninstallation and reinstallation of the teredo tunneling adapter Microsoft and check if the problem persists. Follow these steps:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  "d. in r to manage devices, expand click right network adapter on" teredo tunneling adapter Microsoft ", click"Uninstall"and click"OK".

  Restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 2:

  If the previous step fails, update of teredo tunneling adapter microsoft and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• [SOLVED] Error 404 Google + card Tunnel Teredo Tunneling Pseudo-Interface disabled in NetBIOS over TCP/IP

  I realize that it is a long title.  It could be useful describe my problem.

  Recently, I downloaded something (not sure if I can't talk about website) and with download received 4 bad files found by Malwarebytes named: PUP. OfferBundle and PUP. ToolbarDownload.  These 4 files were quarantined and then removed, but this does not solve my problem.  I ran Microsoft and other spyware, but nothing more has been discovered.

  I have Norton Internet Security, which extends constantly and I always have these terrible files.

  I can not access Google search engine.  I get this message: error 404 (not FOUND)! 1

  The address bar reads: cgi-bin/redirect.ha.  I have another computer and am able to access Google since the router same use so I know there are still a few malware rootkit on my computer which may be connected to the Teredo Tunneling adapter, I don't understand.

  I'm not sure how to solve this problem.  I don't know where watch, but ran many scans of data collection.  Here is a part of a single test showing wireless and LAN configurations:

  Windows IP configuration

  Name of the host...: StrikingEagle-HP

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: att.net

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek RTL8188CE 802.11b/g/n WiFi adapt

  Physical address.... : 20-10-7A-1C-AF-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:b5fc:b411:6df0:e722 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:b9d4:2772:d89a:3a5f (Preferred)

  Address IPv6 local link...: fe80::b5fc:b411:6df0:e722% 13 (Preferred)

  IPv4 address...: 192.168.1.73 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:35

  End of the lease...: Monday, April 23, 2012 23:29:34

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 13

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 320868474

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : att.net

  Description...: Realtek PCIe GBE Family Controller

  Physical address.... : 2C-41-38-5C-76-B6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2602:306:cdb8:5300:584d:2ddf:6 a 08: f6a7 (Preferred)

  Temporary IPv6 address...: 2602:306:cdb8:5300:575:56e9:298d:9097 (Preferred)

  Address IPv6 local link...: fe80::584d:2ddf:6 a 08: f6a7% 11 (Preferred)

  IPv4 address: 192.168.1.71 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday, April 22, 2012 23:29:32

  End of the lease...: Monday, April 23, 2012 23:29:32

  ... Default gateway. : fe80::42b7:f3ff:fec9:a2e0% 11

  192.168.1.254

  DHCP server...: 192.168.1.254

  DHCPv6 IOOKING...: 237781304

  DHCPv6 DUID customer...: 00-01-00-01-16-A6-EF-8E-2C-41-38-5C-76-B6

  DNS servers...: 192.168.1.254

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {38655146-6231-4777-AB1C-2DC12E0017FD}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft 6to4 card

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter ISATAP.att.NET:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : att.net

  ... Description: Adapter Microsoft ISATAP #2

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:2413:2ee1:3f57:feb8 (Preferred)

  Address IPv6 local link...: fe80::2413:2ee1:3f57:feb8% 14 (Preferred)

  ... Default gateway. :

  NetBIOS over TCP/IP...: disabled

  Server: dsldevice.att.net

  Address: 192.168.1.254

  Name: google.com

  Address: 74.125.227.40

  74.125.227.41

  74.125.227.46

  74.125.227.32

  74.125.227.33

  74.125.227.34

  74.125.227.35

  74.125.227.36

  74.125.227.37

  74.125.227.38

  74.125.227.39

  Please note the last entry.  DHCP is not enabled.  NetBIOS over TCP/IP is disabled.  Now, it's for the Tunnel Teredo Tunneling Pseudo-Interface AND Google map is registered immediately thereafter with a list of IP addresses.

  Would be - why I can't access Google?  How can I fix it?  How can I activate this card Tunnel?  I want to do this?  I did a ping for the Tunnel of the card test and it seemed to work OK.  How do I know if card Tunnel is really on?   Why is the Tcpip BIOS

  people with disabilities in the last list of IP and not on others?  Why are all those Google IP addresses listed?

  Any help is greatly appreciated.  I'm very stuck.  Thank you.

  Edit = Edit

  has run another scan: MicrosoftSecurity Agent (I think) that produced a VERY long report, CBS.  There are a lot of mistakes in this report, and I don't know which ones were repaired my Microsoft or if errors are related to my problem.  Here are some of the errors.  All t errors are repeated throughout the report. I hope this info is helpful:

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, CBS Session info: 30218206_2951615106 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:06, missing version of the CBS identity information. [HRESULT = 0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:06, error CBS has no identity shred: Microsoft-Windows-Internet Explorer-LanguagePack [HRESULT =

  0 X 80070057 - E_INVALIDARG]

  2012-04-11 07:29:07, CBS Session info: 30218206_2956451109 initialized by the WindowsUpdateAgent client.

  2012-04-11 07:29:07, info CBS doesn't have the package opened internally. [HRESULT = 0X800F0805 - CBS_E_INVALID_PACKAGE]

  2012-04-11 11:20:30, CBS M² info: could not start the download with pattern file: C:\Windows\servicing\sqm\*_std.sqm, flags: 0 x 2 [HRESULT = 0 x E_FAIL 80004005]

  Hello
   
   
  We are pleased to know that the problem is solved.
  We know in the future if you have problems with Microsoft Windows.

• I have teredo tunneling problem adapter code 10

  I saw that it said to uninstall and reinstall.  If I do this what site should I go to reinstall too and I have to pay for it.  How much does it cost?

  Hello Debbie,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the teredo tunneling adapter.

  But I would like to know some information to help you better.

  (1) don't you make changes before this problem?

  In the meantime, please follow the following suggestions to solve the problem.

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  One of the main causes for this is that the network adapter does not currently support this feature. You can download the latest driver / updating the driver for your network card or chipset and then try to uninstall and reinstall this component.

  Method 1: first of all, try to follow the steps mentioned in the link below and see if that helps.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  Additional information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Microsoft Teredo Tunneling adapter device"does not work correctly.

  Hi Sir/Madam

  Hello, can you help me find driver problems, sir.i am on hp pavilion g6 Series notebook.i found this message there, Windows reports that the "Microsoft Teredo Tunneling adapter" device is working properly. But I opened the Device Manager and I found the icon and I double click and then try to update the driver software but I found ago encountered a problem... This device does not work... Sir can you help me solve this problem... Thank you for your time

  Hi Binet1,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-2225tu issues of driver for laptop and have on the Teredo Tunneling pseudo-interface. Right click and delete all Teredo Tunneling pseudo-interface. Restart the computer. You could update driver software by right click, browse computer for driver software. Select let me pick from a list of device on my computer-> network adapter drivers > Microsoft > adapter Microsoft Teredo tunneling.  You can enable system restore by following this document.

  I'd be happy to help you if necessary because there are many models of HPNotebook, I need the model number. How can I find my model number or product number?
  Please respond with an operating system that you are running:
  Operating system Windows am I running?

  Please let me know.

  Thank you.

• Somehow E changed Teredo Tunneling Pseudo Interface Microsoft Tun Miniport map2, how to change it back please?

  Hi all, I tried to figure out why I got with the Teredo Tunneling Pseudo Interface 10 exclamation point error code and the error code 2 adapter 6to4 31, tried to update driver and somehow changed Teredo to Tun Miniport, can someone help me change to Teredo please?  32-bit Pavilion HP running Vista.

  Is something that does not? These errors can usually be ignored.

  http://support.Microsoft.com/kb/932520/en-us

• Microsoft Teredo Tunneling adapter does not work.

  Original title: Microsoft Teredo Tunneling adapter

  I think I'm ready for questions on the Teredo in the forums.  I tried these "FixIt", and nothing works.  It w/b well if Microsoft had a site to find this Teredo so that we can download a 'new '.  The defective one I have on my desk is dated 2006.  Really frustrating to continue in these wild pursuits to find a 'solution' to the Teredo Tunneling adapter.

  Alice

  Hi Alice,.

  Thank you for posting your query on the Microsoft Community.

  I understand that you have a problem with Microsoft Teredo Tunneling adapter. I will help you solve the problem.

  Before we continue, we need more information to help you better.

  1. Did you change to the computer?
  2. Do you get any error messages when you try to use Microsoft Teredo Tunneling adapter?
  3. Have you installed a third-party software on your computer?

  As you have tried some troubleshooting steps, I suggest you disable third-party security software installed on your computer (if there is) temporarily and update a hardware driver that is not working properly.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Turn off the Antivirus:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I suggest you check suggestions provided by Nithyananda J from the following link to see if it can help solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter-driver-download/d7efb977-b3ed-4373-A292-b6261faeb72d

  I hope the above information helps. Please let us know if you need help with Windows. We are happy to help you.

  Thank you.

• Help with error of unidentified network and Teredo Tunneling

  Well guys, this one's a doosey! My computer has recently lost my internet connection and it gives me the network not identified when I try to connect to my WiFi.  I looked into it and found a couple of things different.  One of them being that the Teredo Tunneling driver in my network drivers does not (code 10).  I tried to do a few things to correct what I found on other resources, but they did not work.  At this point I don't know what to do, so I could use some help!

  Here's my ipconfig/all, if this can help!

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\Owner>ipconfig/all

  Windows IP configuration

  Name of the host...: Allens-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt #2
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel Centrino Wireless-N 2200
  Physical address.... : 9C-4E-36-3C-86-28
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e999:dc2e:1673:3164% 13 (Preferred)
  IPv4 address: 192.168.0.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Monday, October 13, 2014 21:27:44
  End of the lease...: Tuesday, October 14, 2014 01:01:19
  ... Default gateway. : 192.168.0.1.
  DHCPv6 IOOKING...: 362565174
  DHCPv6 DUID customer...: 00-01-00-01-19-25-C7-9A-DC-0E-A1-FC-AC-FD

  DNS servers...: 192.168.0.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)
  Physical address.... : DC-0E-A1-FC-AC-FD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Owner >

  Hello Allen,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the internet. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  Remember to make changes before this problem?

  In the meantime, please follow the following suggestions to solve the problem.

  For questions related to the unidentified, network please follow the suggestions of Nithyananda J and see if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Also, try to Reset Winsock and see if that helps.

  1. Click Start, all the Programs\Accessories and click right on command prompt.
  2. Select ""Run as Administrator " to open a command prompt."
  3. In the windows command prompt , type the following commands:
  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer. This should help.

  For problems related to network card drivers, where you get an error code 10 in device properties. You can try to follow the steps mentioned in the link below:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  https://support.Microsoft.com/kb/943104?WA=wsignin1.0

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.