Reinstall Vista on a new hard drive and with a new motherboard

Similar Questions

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I am running Yosemite. on iMac. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall CS4 after failure of hard drive and everything works - photoshop, Indesign - EXCEPT Acrobat 9 Pro. I am running Yosemite on iMac. I reinstalled Acrobat from the disks, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  What is the cause? If yes where can I get.

  I tried to uncheck the boxes, but no difference.

  Is this or an activation problem

  Thank you

  K
  

  Hi Kate,.

  Acrobat 9 is not supported on OS of Yosemite.

  You could face compatibility problems.

  Kind regards
  Rave

• Reinstall Vista clean after replacing hard drive

  Hard drive crashed in my Acer Aspire 3680-2682. I replaced the hard drive with a larger HARD drive and did a clean reinstall of Vista Basic to my CD anytime upgrade. My computer did not come with recovery discs and the recovery partition of course disappeared as well.

  Can I use my same product key that is on my COST base sticker of Vista?

  If you want to reinstall Vista to how you purchased the computer, use the ORIGINAL product key that was on the computer to do.

  It was what was my original advice.

  Mick Murphy - Microsoft partner

• Need to reinstall Vista after replacing the hard drive

  Microsoft website has confused me! Help please! Should I just buy and install vista again?

  * original title - I got my computer fixed and a new drive hard put, I could not find the disks from acer with what he came or the vista disk. Acer disks I found, but how do I buy windows vista? *

  Microsoft website has confused me! Help please! Should I just buy and install vista again?

  Hey LauraR1991

  If you have your acer recovery disks, you need not buy new vista

  you already have a license of vista

  The acer recovery disks are to reinstall vista on how you purchased your computer

  If the disks from acer that you aren't below recovery disks link is to buy vista directly at acer recovery disks

  they sell them at a nominal cost

  Acer Recovery Media purchase program

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Walter, the time zone traveller

• Get an IRQL error when reinstalling Vista on a formatted HARD drive.

  My (HP a1700n) office has been very slow, perhaps a virus. I ran Norton NIS and also had Norton disk utilities cleaner. Before that the Office stopped completely, I was able to shoot the important things (pictures, videos, etc) nothing else I could lose and wasted. I decided to start over and reinstall the Vista operating system, since I don't have the disk. Has gone so far as to choose the partition and after that he began to «analyze...» "it froze and gave me some kind of error that the partition not could not be found or something like that, well I deleted the partition with the recovery partition since I created a disc a new partition using all the available space, but now I get the not_les_than_ error message. I only go as far as to choose the partion and starts to analyze then the BSOD appears. I did not add anything other than a 1 GB of ram and I removed it, so now the computer only has the 1 GB it is came with, everything else is what came with when I bought it 2 years ago. I don't know if it's hardware related or I'm doing something wrong.

  Any help would be greatly appreciated.

  Eric

  If you get BSOD when installing, try the Vista repair Forum for advice and give them all the details of BSOD error.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner

• I reinstall CS4 after failure of hard drive and everything works except Acrobat 9 Pro. I'm under El Capitan on MacbookPro. I reinstalled Acrobat but when I open I only get Word to Acrobat in the finder without options and it does not open.

  I reinstall the CS4 Master Collection after failure of the card logical and all work EXCEPT Acrobat 9 Pro. I'm under El Capitan on a Macbook Pro. The program worked with El Capitan until the logic board failure - I use it every day.  I reinstalled the entire Collection, but when I open I get that Word to Acrobat in the finder without other menus - the application does not open. As a first step, I get an error message.

  Acrobat has detected there are missing components

  Adobe Pdf Finder

  Adobe PDF Viewer plug.

  I tried to uncheck the boxes, but no difference.

  How can I get an operational program again? If Acrobat Pro 9 is no longer supported, how to get a version supported by software that works on my computer?

  Thank you.

  Thanks for the explanation. I actually have to install Acrobat and it now works. I downloaded and installed Adobe Reader XI (I think, http://ardownload.adobe.com/pub/adobe/reader/mac/11.x/11.0.02/en_US/AdbeRdr11002_en_US.dmg ) and opened the program. I noticed that after I opened the new drive, my Adobe Reader 9 program began to work. After that, I tried to open Acrobat and instead of getting the error 6 message that I had before, I had an error on a question of license that would require me to uninstall and reinstall the software. Once I did these steps my Adobe Acrobat 9 Pro started working! Don't know why my program, but it is fully functional again. I hope it helps someone else, I have why I came to answer.

• Reinstalling Vista on a new hard drive in a Dell XPS420

  I have been using my Dell XPS 420 for years, but lately the C: drive (with Windows Vista Home Premium and the recovery partition) are dead. I had to reinstall Vista on a new hard drive. It went well until Vista was finished all the updates that are accumulated. He says that my Windows is not genuine, and he refused to go further than the connection. The Windows CD is Dell and it came with the computer. My Dell warranty expired a long time ago. Can anyone help?

  Using the recovery process of the manufacturer normally does not require activation. It will activate itself during the recovery process.

  Product key and product ID are two different things

  Read this about AV Avast which causing 0xC004D401 error Code

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/a3145e58-EAEA-43e5-B2DB-c15885076c48

  And read this topic to report diagnosis by Christmas Paton.

  http://social.Microsoft.com/forums/is/genuinevista/thread/a3fda1a0-6199-41a4-b3d6-5be62cae3d79

  And if necessary, repost in the Vista install, upgrade, and activate forum (this one).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install?page=1&tab=all

  Noel Paton, he will come here.

  This is the right forum, but it may not read fine on the information contained in the header not mentioning not activation problems

  See you soon.

• Having trouble installing new drivers after installing a new hard drive and Windows Vista.

  I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

  original title: new installation from hard drive problem

  Hello

  I suggest that you run the Startup Repair tool and check if it solves the problem:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

• My hard drive is damaged. I got a new hard drive and now I want to reinstall Windows. Can I use my existing product key?

  original title: my hard sucks

  my hard is damaged in some portion.can, I changed the new hard drive and reinstall Windows vista with the existing product key?

  Hello

  Yes, you can reinstall vista with your product key on the new hard drive

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Here's how to do a clean install of Vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• How to reinstall Vista on a new hard drive in a HP Pavilion dv6-1128tx Entertainment Notebook PC

  Original title: ok, so I have a HP Pavilion dv6-1128tx Entertainment Notebook PC

  I have a HP Pavilion dv6-1128tx Entertainment Notebook PC right... and my hard drive crashed just completely, I had a new hard drive and now I want again to install windows Vista on it, but I don't have a restore cd but I have a back on my old operating system... What can I do? Help?

  is there anyway that I can restore my operating system...?

  Hello

  What do you mean by: "I have a return upwards on my old operating system?"

  You make an image and with what program?

  If this is not a picture read more.

  Contact HP and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Of hard drive and installed new drive but Code failure not accepted. Original install was XP with Vista update.

  Of hard drive and installed new drive but Code failure not accepted.  Original install was XP with Vista update.  What do I need to install the xp before installing vista?

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Also:
  How to activate Windows Vista by phone
  http://support.Microsoft.com/kb/940315
  http://www.mydigitallife.info/2008/10/13/how-to-activate-Windows-Vista-by-phone-activation/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Reformat the hard drive and a clean reinstall of Vista

  Hello
  I was wondering if you could advise me if this is possible.
  I have Vista on a partition, a home machine built dual boot (with XP), who begins to fill. I decided to stop using XP, which

  is sitting on the second partition of the hard drive, and I want to reformat the disk and a partition with Vista on it. Taking into

  mind, I'm not bothered about losing all the data and save nothing, in my opinion, I don't want to lose, can I just reformat the hard disk into a single

  Partition and reinstall Vista? I'm sure that the answer is Yes, but my main concern is to ensure my "serial key" is accepted and that the activation

  process will go smoothly. Read other messages I prefer not to use Vista to reduce the size of the XP partition and prefer to make one

  clean install.
  Your help and feedback will be greatly appreciated.

  On Thu, September 16, 2010 08:40:58 + 0000, rainb0wman wrote:

  I was wondering if you could advise me if this is possible. I have Vista on a partition, a home machine built dual boot (with XP), who begins to fill. I decided to stop using XP, which

  is sitting on the second partition of the hard drive, and I want to reformat the disk and a partition with Vista on it. Taking into

  mind, I'm not bothered about losing all the data and save nothing, in my opinion, I don't want to lose, can I just reformat the hard disk into a single

  Partition and reinstall Vista?

  Yes. Do a clean install of Vista and leave this formatting occur
  the first stage of the installation.a

  I'm sure that the answer is Yes, but my main concern is to ensure my "serial key".

  You mean the product key, not series.

  is accepted and that the activation
  process will go smoothly.

  You can reinstall and reactivate as many times as you need or want.
  No problem. Worst case, if it's some time since the last
  activation, you may need to activate by phone call, but it's
  quick and easy.

  Ken Blake, Microsoft MVP

• I own Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to

  I have ownd Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to reinstall my Acrobat 8 legally bought and paid for, but he says that it cannot connect to Adobe to confirm my serial number and gave me only 30 days use because it is not registered.

  Help, please

  Post edited by: Bil Colthurst

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server