Reinstallation of Windows XP Home Edition (new hard drive) does not start properly, please help

Similar Questions

• New hard drive does not start

  I have a T61 with XP on it. The factory hard drive was beginning to show its age, so I got a 500GB WD Black drive for her. I used Acronis True Image to clone the old hard drive to the new. I used my counter top to do the cloning. When I plug the new disk in, the cursor just blinks and it will not start.

  I thought that maybe the clone was bad, so I put the new drive hard back at the top of my desk and is able to boot all the way to the windows start screen. If I plug the old drive in the laptop, it starts very well, simply refuses to boot from the new drive.

  Guessed it.

  Put the new hard drive into the computer, put the old hard drive in a USB enclosure and done a CD boot Acronis, and made the clone of the laptop. Runs like a champ and now flies.

• After the new HARD drive does not start installation Qosmio G15

  I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.

  Hello
  I think that the boot order has been the bad HARD drive in the BIOS.
  At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
  Simply access the BIOS and change the boot order

• G62: New hard drive does not start after recovery.

  I installed a new hard drive after my old a bi dust.

  I ran the recovery from the discs of HP.

  After formatting the disk and copy files, it won't boot from the disk.

  I changed the boot order and tested the drive in the BIOS.

  What Miss me?

  The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://FTP.HP.com/pub/softlib/software11/COL32372/ pv-80183-1/sp44645.exe

• DV9000 new hard drive does not start

  DV9000 had smart hd HD replace failure did it, now, it will not boot from the cd to retrieve records. All I get is the operating system not found. Help, please

  OK... after a lot of trial and error. This works.
  ISO created from files that I found on the Internet for vista Home premium 64-bit
  Then used wintoflash to make the stick bootable flash... fail. tried again a portable my passport HD success!. Will boot from the external drive but not a flash player.

• Reinstallation of Windows 8 on a new HARD drive

  Original title: new hard drive

  Please forgive me if this has been requested, however I have a new hard drive sent me as mine is a failure and I will need to reinstall Windows 8 on it. Now, I know that I have to reinstall first 7 victories but my question is that I have to install drivers after that or I can just install windows 7 and then continue to the windows installation 8. Also always work the key that I got with my windows 8? Thank you for any response and once again, my apologies if this has been asked before...

  Just continue to reinstall Windows 7, then perform the upgrade and re-enable by phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

  You can pass it to install the drivers.

  The same key will work.

  Option 2:

  First, create a backup of your installation of Windows 8 on an external hard drive:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Then, create a repair disk:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  -Shutdown your computer.

  -Uninstall the existing hard drive.

  -Install the new hard drive,

  Boot from the recovery media that you create.

  Make sure that your external hard drive is plugged, plugged in and turned on.

  (a) in the screen install now

  (b) click on repair your computer

  (c) click on Advanced Options

  (d) click on troubleshoot

  Click on Advanced Options

  Click System Image recovery

  Wait while the System Image recovery is ready

  Choose your account

  Enter your password and click on continue

  See the following article for instructions on how to complete the restore:

  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

  Once the restore is complete, you will be asked to reboot.

• Reinstallation of Windows 8 for a new hard drive

  Computer hard drive laptop HP 2000 was dying. Could extract COSTS - 8 indicated as OEM 64-bit Windows.

  Replaced the HARD drive bad with good.

  Installed Windows 8 starting a DVD of 'all versions', but the certificate of authenticity is not accepted.

  Tried Windows 8 x 64 and Windows8 N x 64.

  How to get the "correct" version of Windows 8 who will accept the COA?

  TIA

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  8 Windows product key is encrypted and integrated into the BIOS and the so-called "COA" you extracted is probably incorrect. Please use the support of HP recovery, you created when you first set up your computer, return the computer to a factory State. If you create your personal HP recovery media, please contact official HP Customer Support, via the Portal Support HP's worldwide, to see if the HP recovery support is available for your computer.

  Alternatively, you can try this download of Windows 8 OEM; http://www.Google.com/URL?SA=t & rct = j & q = en_windows_8_x64_dvd_915440.iso & source = web & cd = 1 & cad = AJLN sqi = 2...

  It is a unofficial "official licensed copy of Windows 8 OEM." Download this file (you may have to try several times or several times successfully download this file) and burn the ISO image to a DVD. Set the BIOS to use UEFI, enable 'Secure Boot' and disable 'Legacy Support... If these options are present. Boot from that disk and install Windows 8. It should register as an official copy and use the key embedded in the BIOS. Please note that any customizations HP or HP value-added is installed using this method.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How do I download Windows xp home edition I hit, but I lost the cd please help me

  I have the original key from Windows xp home edition, but I lost the cd how do I download full window xp home edition please help me

  If your computer was shipped with pre-installed XP it's called OEM.  If you want to re - install in this case you would need a copy of XP OEM.  A detail would not work with your OEM key.

  You have Googled XP Download House?  I found, 5 places immediately the bat.

• Trying to reinstall my Windows XP home edition and my keyboard does not work when I reached the part where I have to type my name and organization

  Original title: reinstalling Windows

  I am trying to reinstall my Windows XP home edition and when I reached the part where I have to watch myself and my organization my keyboard does not work and I can't type my name or to the next step.

  Hello

  1. did you have backed up your data before attempting to reinstall Windows?
  2. do you have other devices connected to your computer outside of the mouse and keyboard?

  If so, I suggest that you remove any external devices, then try reinstalling Windows.

• Satellite M30x - new HARD drive does not work

  Hello.

  I am installing a new ATA 2.5 "internal hard drive for my Toshiba M30X-166. The drive is a Seagate Momentus 5400.3 120 GB model. The laptop does not recognize the disc and no related error message appears, and in the BIOS, it shows as "HD not available."

  I put this drive in an external USB - IDE enclosure and was detected by my desktop PC, and I was able to partition and format the Momentus, so I know the drive is indeed work, but my M30X still does not detect the drive.

  What can I do to make the laptop recognize this unit? The BIOS M30X is: Phoenix EAL20 version 1.90.

  Thanks for your help.

  Hello!

  Have you tried another HARD drive? The new HARD drive is may not compatible with the laptop or does work does not correctly.

  Normally, a 120 GB HARD drive should work because the laptop has a limitation of LBA 28 bits and so you can only use hard drives 120 GB.
  In the worst cases, the HARD disk on the motherboard controller is defective :(

  Good bye

• New hard drive does not appear in the disk utility

  I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.

  Thank you.

  You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.

• Toshiba Q300 480 GB HARD drive does not start after migration

  Hello

  I bought a disc of Q300 489 GB to replace a small 840EVO of Samsung. I used the toshiba tool to clone the smallest to the largest player. However when the clone is finished and the reboot of the machine the machine hangs just at the start of the process (before starting windows 10). If I go back to my little samsung it starts without a problem.

  I tried to treat twice with NTIEcho and also tried with Partition AOMEI tool, all attempts have failed to start on the Q300 drive.

  I am just tempted to refer the reader to Ebuyer, getting another Samsung. Maybe Toshiba can tell me how to get the drive working properly?

  Regards Sean

  PS. can someone direct me to a page where I can raise a ticket of Toshiba, I would be grateful. There seems to be some links broken on the UK site.

  Hello.
  Do you have an error message when the operating system does not start? Appearing in AOMEI Partition Wizard you have been used during the replacement of the Samsung drive?
  After the largest disk cloning, you may need to change the boot settings in the BIOS or to remove the previous Samsung drive to test.

• new HARD drive does not license of Windows 7

  Hello

  I installed a new Windows 7 HARD drive that does not accept my license key.

  For more information, I ran the diagnostics report - see below-

  Can you help me solve this problem?

  Thanks a lot for your comments

  Kind regards
  Barbara

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 4TWGJ - TDX8V-YXFKM
  Windows product key hash: 8tthKnS08isksrk7cn6HYVSKB8Y =
  Windows product ID: 00426-068-1817632-86622
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {B4833878-2617-40A8-92A9-650C5D40C33A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130318 - 1533
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {B4833878-2617-40A8-92A9-650C5D40C33A}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-YXFKM00426-068-1817632-866225S-1-5-21-223448066-1245420907-1765043143Dell Inc.. Latitude D830 Dell Inc.. A15 20100104000000.000000 + 0005FEA3007018400FA08070409Europe West Standard Time(GMT+01:00)13DELL M08 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00172-068-181763-00-2057-7601.0000-1482013
  Installation ID: 021870524615236343692330733301061765598671466563870355
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: YXFKM
  License status: initial grace period
  Time remaining: 5700 minute (s) on (3 day (s))
  Remaining Windows rearm count: 4
  Time to trust: 29.05.2013 13:35:35

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 5:3:2013 15:21
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAABAAAAAgABAAEA6GEWk6tF2EFOsAYMRoNi/YylHOma5tggKoU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M08 APIC
  FACP DELL M08
  HPET DELL M08
  MCFG DELL M08
  ASF!            REFERENCE DELL M08
  TCPA
  M08 DELL SLIC
  SSDT PmRef CpuPm

  Windows Product ID: 00426 -068- 1817632-86622

  The part you are interested in is the section to three digits of the number to identify the product, if it corresponds or is included in one or two digits of the examples below, you probably have a MSDN or TechNet product key. "These keys must not be sold for retail use.

  065, 066, 067, 068, 069 to Ultimate, box 220 for professional and 230, 231, 232 area for Home Premium,

  Note: Although that illegally sold product MSDN/TechNet keys allow more activation
  (usually 5 or 10), so these keys can sold "several times" before activation may fail.

  = The measures you can take.

  Report Conterfeits:
  https://www.Microsoft.com/en-us/howtotell/CFR/report.aspx

  R U Legit: file a complaint:
  complaints from consumers at 1-800-RU-LEGIT (785-3448)

  Reports of software piracy
  http://www.Microsoft.com/piracy/reporting/default.aspx

  Contact Microsoft: http://support.microsoft.com/contactus#tab0

  Better Business Bureau: http://www.bbb.org/

  File a complaint against eBay. Suggest that you ask for Microsoft software 'All' not allowed to be sold on eBay, because it is a constant problem. Ask the BBB to pronounce against eBay, unless they (eBay) cleans up their act.

  USPS mail fraud (if the product was mail via the US Postal Service): https://postalinspectors.uspis.gov/forms/mailfraudcomplaint.aspx

  J W Stuart: http://www.pagestart.com

• Satellite M30X-165: new HARD drive does not work

  Hi, I want to replace the old hard drive, HITACHI 80 GB in my Satellite M30X 165. I bought SEAGATE Momentus 5400.3 120GB but it seems that it may not be recognized by the BIOS. Anyone know what to do or what types of discs can be used in this notebook? Thanks for help.

  Hello

  Sometimes a bios update has solved many issues about installing new hardware.

  BUT Please note: the Bios has a limitation of size of HARD drive support. Not all sizes are supported. I guess that the 120 GB are too big and therefore you can not use it!

  You must switch to a smaller size. Check with a 80 or 100 GB HARD drive

  See you soon

• Qosmio G20 - new HARD drive does not work

  I have a G20 and try to change one of my hard drives of 60 GB for a new 250 GB (Western Digital WD2500BEVS, SATA-150, 5400 RPM).

  First thing I would add is that the hard drive is fully discoverable, formatable, and usable in my desktop... but in my G20s it only detects it in the BIOS but has a status of 'impossible' and my operating system (XP) can't quite see.

  Please can someone help?

  Hello

  You've got a 60 GB and a 250 GB HARD drive in your Qosmio G20.
  Is this good?

  What RAID settings do you use?
  You can check the settings in the BIOS and in the user manual, you will find some details about the RAID.

  If the RAID is defined on the mirror then only the HARD drive would be available and if the first HARD 60 GB disk is then the other HARD disk would also provide ONLY 60 GB even if it s 250GB