Reinstalled Microsoft Xp professional and have now no network card

Similar Questions

• If the Office don't not have a wireless network card, how can I go on installation/download/that it is better to get?

  I installed a router (Cisco Linksys Wireless - N GigabitRouter) wireless to my laptop and now I'm trying to connect a desktop (Windows Vista) computer to the network, but he tells me that he doesn't have a wireless network card. How should I do to install a / if can be downloaded, where? and what is the best?

  You must either install a wireless card to the desktop or to get a wireless adapter that fits into a USB port. Here are the Linksys products, you could use http://homestore.cisco.com/en-us/products/linksys-adapters_stcVVcatId552067VVviewcat.htm?icid=home_linksys_adapter_all&src2=home_linksys_adapter_all

  If the office is reasonably close to the router and you can connect a cable to it, wired Ethernet would be less of a hassle.

• Switches Cisco stackable, 500 and the consolidation of NETWORK cards

  Am looking using the stacking and NIC teaming to create redunancy for user access to servers. What I think is becoming 2 switches SG500-28 and set them up in a stack which appears as a logical switch. Now on the servers I have re 2 network cards to be a team so that they appear as a logical interface 1, perferably in an active/active configuration using LACP. In this team NIC take 1 member of the team to either switch B, so that each Member of the team is on separate switches.

  Givent the scenario:

  (1) who will work with the switches of the 500 series? The switches is that their price point is perfect for my client.

  (2) in addition, the connection of the battery will be there also needs to be a GAP between the switches or the connection of the battery is also data traffic?

  Hi Robert,.

  (1) I don't see any reason that this would not work as desired. There are the requirements by doing a SHIFT but being on the same physical switch isn't a.

  (2) with the switch of SG500 line, you have a few options for up/down the link between the switches to the battery, it depends on the model. Each of them supports 1 G up and down links with copper. The switches are then divided and support 5G or 10G mini-gbic down links. There is not currently an options trolling battery links.

  Let me know if that answers your questions!

• Buy new computer Windows 7 Professional and have questions about other files, and the removals of document on the old computer

  Hi all!

  I need help.    I just bought a new computer that has Windows 7 on it.     This old computer is 7 years old

  and last year I had put win 7 professional about it.     I'm trying to delete files on it.    How can I do this correctly.

  What I need to remove the Windows 7 Professional out of it since I bought it and have the license and the disc.    Or, do

  to keep the disc and just remove it from this computer.     What happens if someone else wants the computer I leave it on and

  Give them the disc.   How can I handle this?     I am new to this?    Someone just set up my new computer and I want to

  to make sure that I have all my passwords and other things out of that right.

  CAN SOMEONE HELP ME SOON!    A.S.A.P.!    Cause I need to work for the new space.

  Thank you.    Sharon

  If you delete all partitions found (when booting from the cd of win) it will only destroy what is on the hard drive of the PC (all data can be saved), he won't do anything to victory dvd

  If your new PC shipped with win7 preinstalled you need not really your origonal dvd win7. -You can sell or keep

  If you do not want to give the old PC, then simply remove the hard drive (how can be found on google) and destroy the hard drive with a heavy hammer

  (A seven year old PC is practically worthless)

• Get ESXI, up and running, but I have changed the NETWORK card settings, how do I fix? Help please!

  ESXi perfect on my server but stupid ass me were running so I

  play with the card NETWORK card and I changed to 1000 end, and it was

  100 MB and I forgot I was on a 10/100 switch,.

  in any case now I

  cannot ping or you connect the box to esxi...

  What should I do?

  The

  Server is a dual nic, should I connect the other cable network and

  Configure the which? will it work?

  I changed it using vSphere client...

  Connect a monitor, keyboard and mouse to the host (as when you installed and initially configured ESXi)... Connect to the host interface and select the option "configure management network". Clear the existing NETWORK card, and then select the second network card. You will have to regularize, save the configuration when prompted and let it restart the management network. You should be able to manage the host by connecting the client vSphere again. Then, you change the network configuration to match the new settings, or difficulty of the NETWORK card that you have initially activated to use.

  Is the host within a data center/server room? Why is the selector located only 100 MB? If the switch is able to go in the UK, ask that the host port ESXi will use either door to Go, full-duplex. Otherwise, you create a bottleneck, where it can be easily avoided.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• I returned to windows 7 on my laptop Acer 5253 10 Windows and I lost my network card driver in the process.

  * Original title: jake

  I returned to windows 7 Windows 10 on my laptop Acer 5253, apparently, I lost my network card driver in the process. I want to download a network card for a usb key to solve the problem, but I don't know how. I have no internet access on the Acer so I can't download directly. I not had a disc with disks on it to Acer, they came preloaded. I am running windows 7 pro on the Acer and Dell desk top on as I type. Can someone HELP me understand this? I am not at all computer savvy and need help.

  Using another computer, visit the ACER support for your computer and download the drivers for a USB.

• Load balancer and the consolidation of NETWORK cards

  Hello

  We recently had to our file VMware Server after a bit nasty failure of his original material.  Since we moved, it mostly worked OK, but we don't get the occational network shares paw when large files are thrown on.

  ESXi host, sure it works use 5Gbit ethernet adapters on the same Virtual Switch.  Looking at the traffic it would seem that all traffic flows in just a single NETWORK adapter and it is not much at all through the others.  Is something that I need to set it up so that it can better load balance between network cards?  Or is it a document anywhere who recommended settings for multiple network cards?

  I found a vDS topic but we have not undertaken more liciencing on most of our servers.

  We run VSphere 4.1 via the Vcentre server.

  Thanks for the help.

  faster4233 wrote:

  What you say makes a little more sense on what I see.  There is very little traffic flowing through other NETWORK cards, but is perhaps because there isn't any real traffic goes to them.  I thought that VMware may use multiple NICs, if it was required that is why I thought I'd see more data on the other.

  Curiosity is anyway that I can combine NICs for more flow using VMware?

  The load balancing, you can achieve with VMware is not a "real" load balancing, this is more a static distribution of traffic in accordance with the policy, you have chosen.

  You use means that according to the virtual switch port ID the vNIC to the host is connected to a specific bear is chosen. This unique vNIC traffic will use this bear as long as this bear does not fail. In this case the guests more with vNIC, you have the better are used Teddy.

  Other policies can be better for other scenarios. For example, 'Hash IP' uses the source IP address and target to choose a teddy bear. It is a good policy for a server with a vNIC single file and many different communication partners. The 'Source Port' policy route all traffic through a teddy bear so that 'Hash IP' policy would use many Teddy as not what ID port is used, but the communications partners. And a file server must have many of them, more than it has of vNIC.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• vSphere and NT4 server: lost network card

  Hello

  We test an upgrade to one of our NT4 Server with update Manager 4. But after that VMTools installation and equipment upgraded, the virtual card does not work and I don't know what drivers to take. Anyone have an idea?

  Hello.

  See article kb 1007168.

  Good luck!

• We had Best Buy install a new motherboard and have now no Windows XP. How can reinstall us with no available disks?

  We took our best Buy HP cleaan out and install a new motherboard, but now we must not be pulled up to Window XP and theyu advised us that we need to buy it again.  Is it possible to reinstall windows XP without buying the whole program again.

  -What did they replace the motherboard with an identical?  If so, Windows XP may be able to run.  What happens when you try to start it?

  Don't have they replaced the hard drive?  If this is not the case, there could be a recovery partition on the disk that you can use to install Windows XP.

  Otherwise, contact the manufacturer of the computer for an installation disc.

  You shouldn't buy a new copy of XP.  A computer repairman competent all these possibilities would discuss with you before starting the repair work.

• I am upgrading to windows 7 Home premium to windows 7 Professional and have purchased a Microsoft key. When I followed the instructions at Anytime Upgrade it says it's the wrong key?

  Greetings,

  I need to upgrade my ASUS laptop which is running Windows 7 Home Premium, fully licensed and the COA sticker. I went to the Microsoft site upgrade Express and bought a key specifically to upgrade to Windows 7 Professional W7HP.

  When he proceeds to upgrade the message says that I have an incorrect key. I tried the automatic upgrade indicated by the purchase of Microsoft site and also by running the Express upgrade and manually enter the key from the email sent to me by Microsoft.

  Here's the MGADiag report for my system:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - K46C6 - PH8VK-B2HDM
  The Windows Product Key hash: pErpcUfnvLn0V8lq/GkZCDNWve4 =
  Windows product ID: 55041-619-4677623-85615
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {1B783146-C0E4-408E-9A0E-40DB685C22EB} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120830 - 0333
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {1B783146-C0E4-408E-9A0E-40DB685C22EB}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-B2HDM55041-619-4677623-856155S-1-5-21-3532728287-3945707075-3271481903ASUSTeK Computer Inc. N53SN American Megatrends Inc.. N53SN.204 20110210000000.000000 + 00047FB3607018400FE0c 090409AUS Eastern Standard Time(GMT+10:00)03_ASUS_portable109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800007-02-1033-7600.0000-2092009
  Installation ID: 110911520232144364472995242625643510149901335952710794
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 9YQTR
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 22/11/2012-16:18:22

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 8:26:2012 23:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAQABAAMAAAABAAAAAgABAAEAln3GxnY5GjgmjdpERCOYJwQ/gBBWdS5z

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC _ASUS_ Notebook
  FACP _ASUS_ Notebook
  DBGP _ASUS_ Notebook
  HPET _ASUS_ Notebook
  MCFG portable _ASUS_
  Co-submission _ASUS_ Notebook
  SLIC _ASUS_ Notebook
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  ASF!            INTEL HCG

  Any help or advice greatly appreciated.

  See you soon

  Grant

  Thank you for that. I did some more research on the forums then rebooted my machine. The installation is completed successfully. I think that Microsoft should focus on this. Very confusing tell them that this is a key issue when all that is needed is the machine to be restarted. Thanks for your help anyway. See you soon
  Grant

• My HP Deskjet 2050 will not scan. HP support have tried everything and have now given up, which suggests to contact Microsoft. Help.

  I followed the instructions from HP for 4 weeks. Nowhere!

  Hello

  "HP support have tried everything and gave up now."

  If HP has renounced their product, we can not offer much hope.

  It's their hardware and their software that runs their product.

  I suggest that you try their Support Forums, as it appears from their support of the unscrupulous company.

  http://h30434.www3.HP.com/

  See you soon.

• Upgrade to Microsoft 2010 and have now lost all my Outlook Express emails!

  Hello

  Yesterday, I upgraded my pc from 2007 to 2010 from microsoft, I had no idea that outlook express is no longer taken in charge & a so don't had not saved anything express before the upgrade.

  I used two Outlook + outlook express to run 2 separate email accounts.  How Outlook works well and moved all my old mails/contacts.  Express however is not found, I can't open it.

  I have installation the other account on the new perspectives, he transferred the emails from the last 30 days, which lie on the mail server, but nothing beyond that, plus all of my files are missing & what is the most important!

  Please help me, I got hundreds of emails that are very important to me and I am in despair that they have all been lost.

  Thank you, Emma

  If you use Windows XP (which I assume you're OE does not work on any latest system) then by installing Office does NOT remove Outlook Express.

  He can't because Outlook Express is part of Internet Explorer, which is part of Windows.

  I think that Outlook has replced just the icon of EO for mail.

  Do a search for msimn.exe

  You should find it in c:\program files\outlook express.

  Then you can add back a shortcut on your desktop.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Windows Blog

• Reinstall Window 7 Professional and keep it authentic

  I need to reinstall my Windows 7 Professional SP1 because I nave much issues with my drivers and programs off the coast, and need a table to shave, but I don't know if he'll stay authentic if I use the same product key after the relocation. What should I do to reinstall it and keep it as authentic?

  As long as this is the same computer, you should be able to perform a clean installation and reactivate using the same product key.

  If you encounter problems, you also try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Restore accidentally old profile and have now lost emails and settings; where can I find them?

  While trying to save a profile, I accidentally restored an ancient. Now, I can't access the emails and settings. Are they stored somewhere, or completely deleted when you restore a profile?

  When you replace one file with another, what happens usually when an old profile is restored (especially when accounts are the same). Then, you have replaced your mail with another version. You olny option are your personal backups, Thunderbird stores no information about the 'cloud '.