reinstalled Windows Small Business Server 2003 and Intranet failed during installation
I had to reinstall Small Business Server 2003 and I can't after setting up where Exchange, etc. are installed. It passes through Exchange perfectly and blocks on the Intranet tools on Disc 3. I use the "fixed" CD because the 3 original drive was corrupted when we bought SBS2003. Our version is the original pre-service pack 1. Is there anyway to download a disk image 3 where my disk is damaged? It seems good, no scratches, scratches or dirt.
Hello
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
Tags: Windows
Similar Questions
-
T200v server with Windows Small Business SERVER 2003
Just ordered a server TS200v, can I install Windows Small Business SERVER 2003 on this server, or do I have to upgrade to Windows SBS 2008?
Hello
SBS2003 is not officially supported, I think that 2008 alone is. You can try but might be a problem with some drivers.
J.
-
The Hard Drives on Windows Small Business Server 2003 upgrade
I have a Small Business 2003 Server with RAID 0 with two drives hard exisitng 160 GB. I want to update the server space and replace the two hard disks to the existing with two new drives of 1 TB. I have a picture of the existing and once the new disks are set up, I would like to upload this image to the new. I would appreciate help on this topic, since this will be my first time upgrading. I think I should mirror the exisitng, remove these 160 HB disks and install the two new drives in their place without touching the RAID configuration, or I have to go in the RAID controller and let the controller to find them. then, use a startup disk to point to the image on an external USB drive and let the RAID the rest? I'm on the right track? Help, please.
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Cold clone P2V Windows Small Business SERVER 2003?
Hello
Our small business runs a windows server sbs 2003 running exchange and the domain controller.
I read on the forums that it is not recommended to P2V one domain controller and I know to do a conversion, while the host is running, causing errors. But what could be the problem cold cloning the machine and then initialize in esxi? I do not understand the consequences, should not simply be like turn the physical machine and the new? I don't see myself messages in forums to say "don't not P2V a domain controller", but I have not seen someone tell why and if they do hint only 'hot cloning. "
(Sorry if this sounds ignorant, I'm not much more than a windows guy and would prefer not to have to do a full migration if I have to).
Thank you, any help is great
Still, it's true that it's a good idea not to do a P2V of a domain controller... But if it is the only one, and if you do it in a cold way, and if you remember to start with the right time/clock... so you can try the way.
The other solution might be using Microsoft documentation how to an SBS SBS migration (to migrate to a new SBS in a virtual machine). But isn't very simple
André
* If you found this device or any other answer useful please consider awarding points for correct or helpful answers
-
How can I get out what uses port 80 on Windows Small Business SERVER 2003
Hello
We install a new CRM system, that links to an external site, on our SBS 2003.We are told that for the link to work we must have free port 80.Tried run netstat - and it makes account of nothing - and a few other programs - and they bring nothing - but running ' telnet 192.168.2.2 80 "at the command prompt an error.Apparently, this means that something else IS using it, according to the support team who install the software.
Can anyone help!AlanHello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
-
Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later. We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).
Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)
- Small business, fewer than 10 users.
- Don't use do not Exchange or IIS part included in SBS 2003.
- I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003
Hi copenetadmin5,
Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.
SQL Server forums
http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/
Nice day.
-
ICW fails to configure the firewall on Small Business Server 2003 R2
Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map
C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
The call for initialization of device Upnp () returned ok.
Error 0 x 1 returned by the call to HttpGetDeviceXML().
Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
Call the GetServiceConfigURL for WANIPConnection () returned ok.
Router supports WANIPConnection
Service config URL ctl / http://192.168.1.1:5000 / IPConn
Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()The call for initialization of device Upnp () returned ok.
Error 0 x 1 returned by the call to HttpGetDeviceXML().
Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads
-
I just got a complaint from someone saying that the guest account takes more time and more time to log the area.
We have a number of XP machines and a couple of Windows 7 machines at the reception (to give the impression that we are a company thinging before - you know the kind). In any case, everything is controlled by a Small Business SERVER 2003 for the integration of Windows 7 machines is that a bit of a botch as well as group policy is concerned.
The fact is that in my diagnosis, I noticed that the guest account is only given a temporary profile whenever someone connects to use it (it is used for the interviewed work if they need Internet access for some reason any). Thus, the profile is deleted from the registry and comments folder is removed from C; \Users as soon as they log off. This was brought to the head when I tried to add a printer to the guest account and could not see all of the printers listed in the AD.
Is this a normal behavior, or does all the weird sounds you? It also works with XP in this way?
Thanks for any input and comments.
Angus
Hi siham,.
Welcome to the Microsoft community.
I suggest you to report the issue to the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro
Thank you.
-
Dell PE 1950 and loading of Small Business SERVER 2003
Recently bought a Dell PowerEdge 1950 off Ebay for a training machine. Also bought a few books of MCBS Server 2003 and Small Business Server 2003. I try to install SBS on 1950, but it does not recognize the RAID. I have a USB floppy drive I could load with F6 drivers but can't seem to find just the Perc 5 / I drivers. Site Web of Dell gives only a Setup driver that wants to install the drivers on my laptop when I use it. Could get only the drivers for a PERC 5 / I integrated. My Service tag #
maintain the label removed by privacy policy > I tried a server assistant open gale who would have worked very well, but it doesn't have the SBS2003, only Server 2003 list that does not work either. Thanks for your help You need the "hard drive" (ZPE) version of the driver, and you have to run the EXE file to extract the files before using it:
http://downloads.Dell.com/FOLDER97889M/10/DELL_MULTI-DEVICE_A07_R211422.exe
In addition, you MUST configure the RAID in the CTRL-R utility until all discs can be seen by the operating system, even with the correct drivers.
You realize that Server 2003 will be end of life in less than a year, right? Why the push for 2003 training? You would be better off learning from 2012.
-
Query for windows small business server 2008 SP1
Hello
I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is
Active directory could not install,
Replication failed to allocate memory.
cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.
Your comments will be appreciated
Hello
I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is
Active directory could not install,
Replication failed to allocate memory.
cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.
Your comments will be appreciated
Hey AAAAAAAAAAAAtif
It's an instance of vista installation
Try the link below sbs forum
This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.
http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads
Walter, the time zone traveller
-
Hello
I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:
Windows Setup cannot continue because a required driver could not be installed
I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.
Hello
Your Question is beyond the scope of this community.
I suggest that repost you your question in the Forums of SBS.
https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver
"Windows Small Business Server 2011 Essentials online help"
https://msdn.Microsoft.com/en-us/library/home-client.aspx
See you soon.
-
Windows Small Business Server 2011 Standard access to download
Hello
I need to access a copy of the Small Business Server 2011 Standard edition since the MSDN site, in order to help one of my clients.
They have SBS 2011 standard installed on their network and I'm going to make some big changes to their network. To do this I need to access the installation (file ISO DVD) on MSDN disc. They have the product key, but not the original disks that were used to install SBS 2011 Std.
Thank you for your help.
Hello
Your Question is beyond the scope of this community.
I suggest that repost you your question in the Forums of SBS.
https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver
"Windows Small Business Server 2011 Essentials online help"
https://msdn.Microsoft.com/en-us/library/home-client.aspx
See you soon.
-
Windows Small Business Server Remote Desktop connection
Original title: Remote Desktop connection
I am using a remote connection, but I get this error message. What it means and how to fix it?
Hello KidateLirame,
Based on the provided screenshot and online information, I searched this problem seems to be related to Windows Small Business Server, for better assistance on this issue, I would recommend that you post the question in the Windows Server Small forums.
Here is the link for the same thing.
http://social.technet.Microsoft.com/forums/en-us/home?category=SBSServer
Thank you.
-
Unable to join 7 Pro to the Small Business SERVER 2003 domain
So far, I was unable to join a new Pro 7 laptop running an existing Small Business SERVER 2003 domain. Whenever I try to use:
http://servername/ConnectComputer I get a 403 http error and that it points to an IIS issue, but I can't seem to find a way to work around this problem.
Then I tried to go through the system properties and computer name change and join. Then, I get a message "cannot locate the area." I tried to use the FQDM, only the name of the server, the domain name under the extension, and nothing works. At first, I thought it was a DNS problem, but, I ping the name of the server or any other computer by name, with no problems...
Don't know what I'm missing here, but if anyone can shed some light on the situation, it would be greatly appreciated.
Thank you
Mark,
If you'd want to repost your question on the Forums Technet MS, one of SBS experts it would be better suited to provide you with a solution. Thank you!
Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?
Hello
Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?
Thank you
AA
Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.
To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.
Kind regards
-Andrew
Sent by Cisco Support technique iPhone App
Maybe you are looking for
-
Configure Thunderbird as POP3 on local office only - no. IMAP or Web
I'M absolutely NOT a web mail or a custodian service I just want to use Thunderbird as a local office POP3 e-mail program - ABSOLUTELY nothing else. Whenever I try to install TB, he constantly asked several a presence on the web and account. I want t
-
the file, history tabs are no longer top of the screen and available
on the top of my screen, there was a place to click on file, history, start the private and other navigation buttons... I clicked on something and they disappeared. don't know how to recover
-
Want to buy sleeves for my Qosmio X 500-02 M
Can't find anything about it on the forum so thought I might ask. I'm looking for a sleeve that fits my X 500 02-M mobile computer when I get it. I am currently looking at this one: http://www.Newegg.com/product/product.aspx?item=N82E16834995754 But
-
Satellite A300D - overheating and shutdown
Hello I have a problem with my 3 month old Toshiba Satellite A300D-126. Any time I play a game like Call of Duty 4 or Warcraft after like 15-20 min, the left side of the laptop where the cooler is placed, it is overheating, almost too hot to the touc
-
My daughter-in-law someone bought a dv4 and asked me to do all the required updates and maint systematic about it. I ran MS updates and to halfway through the installation, he just put it off. I tried to restart and the only thing I got was the littl