reinstalled xp and can not detect the modem can't get Armani to set
Up to three devices that need drivers
Hello
Here's some information that I asked. If you are reading this, please make new answer in this thread, please do not create a new issue just to answer, click on reply to a post on this topic.
First of all, you have transcribed the computer not section the System section. To repeat my instructions on the previous thread...
Hold down the Windows (between Ctrl and Alt) key and press the Pause break key. What is stated in the "system:"section (specifically looking for anything that tells you what is your level of service current pack, which will be either 1, 1, 2, 3 or nothing shown)? "
Second, please do the following...
- Click Start
- Click on run
- Type devmgmt.msc and press ENTER, this will open Device Manager window
- Enlarge (click on +) on the section network cards - what is listed?
- Similarly, what is listed under other devices?
You tried to read too much into the information I requested. Even if what you have given can help, for example, it is about what I would expect to...
Laptop model: Toshiba Tecra N723 (being brand, range and model respectively)-Please confirm
Soft modems do not communicate wirelesly. If you work your PC wireless will "talk" to some router/wireless access point that provides your connection to broadband via a built-in wireless adapter not a soft modem. This router/wireless access point is what I need the number of brand and model. Perhaps, for example, Netgear DGN1000 or D - Link DIR-835. There are literally hundreds of routers out there, I need to know your brand and model.
Tricky
Tags: Windows
Similar Questions
-
Portege M200 does not detect the Modem PCMCIA card
I have the Portege M200, when I insert a PCMCIA card (LAN or wireless) the pc detects it ok but if I insert a modem PCMCIA ANY, as a standard 56 k modem, modem card v620 air verizon or a sierra wireless aircard 710, the pc does not detect any, nothing happens when I put it in or out.
V620 Verizon is the card that I have to make it work as soon as POSSIBLE, others, I used for the test, it seems that modems do not work for some reason any on the PCMCIA.
any help?
If the WLAN card manufacturer supplied driver with this card please read manual how to install it on the right track. It is possible that the driver must be installed first.
Sorry, but my opinion on the laptop PCMCIA port is OK and if you need support try to contact the manufacturer of the card. They should have enough experience with own products.
-
I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.
Then, you install Camera raw version 9.4 from this link: Camera Raw of Adobe Photoshop CC and CS6 Installer
-
Audio input Inspiron 15 3000 can not detect the headset
Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?
Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.
1. open Device Manager (type devmgmt.msc in the box of Windows search).
2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
3 Select this option to "Update driver software".
4. click on "Browse my computer for driver software".
5. click on "Let Me pick from a list of drivers on my computer".
6. put the "Show compatible hardware" check box if not already checked.
7. in the list of devices, click on 'High Definition Audio"(native driver).
8. click on "next".
9. in the update driver warning box, click 'Yes' (the driver).
10 restart the portable computer if you are prompted. If not invited, so no need to restart.
[To return to the Realtek driver, do it again but reverse the names in steps 1-6.]If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.
If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.
-
I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?
You know the e-mail password what do you use? I lost over $ 30 on my old Apple ID because I couldn't get into the email and apple would not transfer my money to my new account.
-
A few days ago, I downloaded SP3 on my windows XP computer. and update the windows installer, eversince, then I have a reception an annoying popup message, which reads as follows: Wuauclt has encountered a problem and needs to close > we're sorry for the inconvenience. SEND a MESSAGE ERROR / DON "T SEND I have highlighted both send and not a thousand times and can't get rid of this annoying popup."
What can I doHi AgnesBradshaw,Follow the steps in the article to resolve the problem: -
I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.
Hi abgolf3,
The question may be how the new hard drive has been formatted. Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage. Is all the space on the disk are responsible? If so, take a look at these two documents for your problem:
Format a hard drive or partition to NTFS format
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I installed Adobe Muse and do not have the rule of the breakpoint or a way to make my sites either fluid or admissible. I don't know what is happening. Can someone help me?
It's on a PC... check the view menu...
CTRL (Cmd) / Alt - R on the keyboard to toggle the breakpoint bar...
Neil
-
How can I load photoshop CS6 on a new macbook, which doesn't have a cd slot and does not support the cd drive external mac? I have the original cd of the program.
Jake
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
- and also read https://forums.adobe.com/thread/1146459
-
I have a trial version of Illustrator and could not find the pencil tool. How can I add it to the toolbar?
It is in a group with the Shaper tool
-
I have lost the key code for my Adobe Acrobat Standard for Windows (CD) XI. I had at my office and need to reinstall. How can I get the key code?
There is a number on the CD. Is it possible to contact Adobe and get the key code for this product?
Hello
Please check the help below document:
Quickly find your serial number
In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts
Kind regards
Sheena
-
If I buy 1 annual contract with monthly payment app am I then linked throughout the year, or can I cancel after 3 months and then not pay the rest of the year?
I found the answer myself via chat. the answer is Yes, you can cancel, but you must pay 50% of the remaining months of the annual contract
-
I bought a Nikon D810 and will not open the RAW files in Photoshop 6. Can someone help me?
If you mean Photoshop CS6, select help > updates and download the latest Adobe Camera Raw, which is 8.8.
Get back to me if it doesn't.
-
Dial tone not detected on Modem Compaq Presario CQ61 - VM367UA product #ABA - Model CQ61-313US
I have a modem which does not detect the dial tone. The modem, I replaced it with a new one and I still get the same message. I also reinstalled the driver, nothing helps. Do you know what anyone else I could try to solve the problem?
The rest of the machine works fine. (Wireless / network Jack / etc)
Thanks for any help you can provide.
-TimJ
If you had replaced the modem and reinstalled him his drivers, then you should check if the telephone cable and its connection.
-
IdeaPad Y500 does not detect the camera
Hello everyone!
I had my Y500 for about 1.5 years and I can't use the camera more. The computer does not detect the camera and when I downloaded and installed the camera software the computer shows me "no approperiate driver to install! I tried to uninstall the camera driver and reinstall it again, but it's the same problem.
I would appreciate a quick response
The problem was with the camera and the camera cable. I sent my computer to
Lenovo and they fixed.
Maybe you are looking for
-
Read the question.
-
Satellite P200 - 14 H: I'm looking for the ICC profile
Hello! I'm looking for the profile for my Toshiba P200 - 14 H. It is very important for me.Thanks for any help.Concerning
-
Unsolicited ads are constantly now be e-mailed to ALL my contacts. They are all offended one way or another. For 6 months, I put every effort I could escape to rid the announcement of viagra, and now all my contacts receive this advertising and solic
-
New installation of CUE in existing CMF; can ping the CME CUE, but not network. Solve the docs say to make sure that the QUEUE's default gateway is the CME, which he is. What might be missing? Here are my relevant config (CME is 192.168.1.27 and CUE
-
Desktop slideshow stops working - Windows 7
I have windows 7 32 bit and whenever I run any program that requires windows to switch to the classic desktop by temporarily disabling the Aero interface, the theme changes to "Unsaved Theme" with a single image, and he's not back to my original them