Reinstalling Vista on a new hard drive after the accident.
Hi, I bought a laptop Lenovo, which came with Windows Vista SP2. Recently, my hard drive crashed and I got a new hard drive. In this case, can I re - install Vista with product key provided on my laptop? If it is possible, how can I get the operating system to install. Appreciate any kind of answers to my question. Thanks in advance.
Hello
Yes
This is your vista license to reinstall on the same machine
Contact Lenovo and ask them to send you recovery disks vista to reinstall the operating system as it was when you bought it
http://www.Lenovo.com/us/en/index.html
they do it for a nominal cost of $
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
Then go to the lenovo Web site and download the latest drivers vista of your particular computer
Tags: Windows
Similar Questions
-
Reinstalling Vista on a new hard drive in a Dell XPS420
I have been using my Dell XPS 420 for years, but lately the C: drive (with Windows Vista Home Premium and the recovery partition) are dead. I had to reinstall Vista on a new hard drive. It went well until Vista was finished all the updates that are accumulated. He says that my Windows is not genuine, and he refused to go further than the connection. The Windows CD is Dell and it came with the computer. My Dell warranty expired a long time ago. Can anyone help?
Using the recovery process of the manufacturer normally does not require activation. It will activate itself during the recovery process.
Product key and product ID are two different things
Read this about AV Avast which causing 0xC004D401 error Code
http://social.Microsoft.com/forums/en-us/genuinevista/thread/a3145e58-EAEA-43e5-B2DB-c15885076c48
And read this topic to report diagnosis by Christmas Paton.
http://social.Microsoft.com/forums/is/genuinevista/thread/a3fda1a0-6199-41a4-b3d6-5be62cae3d79
And if necessary, repost in the Vista install, upgrade, and activate forum (this one).
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install?page=1&tab=all
Noel Paton, he will come here.
This is the right forum, but it may not read fine on the information contained in the header not mentioning not activation problems
See you soon.
-
How to reinstall Vista on a new hard drive in a HP Pavilion dv6-1128tx Entertainment Notebook PC
Original title: ok, so I have a HP Pavilion dv6-1128tx Entertainment Notebook PC
I have a HP Pavilion dv6-1128tx Entertainment Notebook PC right... and my hard drive crashed just completely, I had a new hard drive and now I want again to install windows Vista on it, but I don't have a restore cd but I have a back on my old operating system... What can I do? Help?
is there anyway that I can restore my operating system...?Hello
What do you mean by: "I have a return upwards on my old operating system?"
You make an image and with what program?
If this is not a picture read more.
Contact HP and ask them to send you a set of recovery disks.
They should do this for a small fee.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Reinstall Vista on a new hard drive and with a new motherboard
Hello
recently my desktop hard drive crashed, tried several times to use the REPAIR option from the drive to install Vista, but without success. Seems that my old drive hard ide is no longer usable. Wanted to know
(i) the question of if I cud activate my Vista authentic with the same key on a new SATA hard drive with a new motherboard.
(II) after the Vista installation disk, I wud get updates? Since only Vista with SP 2 is supported for updates below. I bought Vista before SP 1 is out.
Hello
You can read the article given below to get more information about the copy of Windows activation after re-installed Windows.
Activating Windows: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions
Once you have completed the installation of Windows will ask you all the updates that are applied to your computer.
For more information follow the links below.
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
CS3 will not activate on the new hard drive after the failure of an old man.
I had a hard drive fail on my Mac and got a new. The operating system before and after were OS 10.10 (Yosemite). I reinstalled CS3 and entered my serial number. It does not accept as a correct serial number. I sent support of Adobe. They said: Yes, it is the correct serial number. I asked what I could do, they said "Try the Forums." So here I am.
The problem is probably that CS3 is not really supported in Yosemite.
What others have experienced, is that If CS3 is already on the computer, you can continue to function, even if you have updated to Yosemite. But many have had problems installing CS3.
Because CS3 is old and is not officially supported you unfortunately are on your own.
-
How to reinstall windows 8 in new HARD drive using the old product key?
Mr President.
One of my clients purchased a new HP Envy 6 - 1150ex running integrated windows 8 64-bit a month ago. Unfortunately the HARD drive broke down by the improper use and must be replaced. I replaced the HARD drive, but I can't find the product key original of the laptop unless you have small windows on the laptop sticker. given that I don't have the recovery for the same model disk how can I install the genuine windows 8 manually by using the product key? where can I find the product key? Please help me.
Kind regards
Yoyo
Hello
Should be no problem at all if you use the version of Windows 8 EVEN because the product key is now embedded in the BIOS of the machine. The process is to get the right installation of Windows 8 media (DVD, USB, downloaded file) and then install on your client computer. No label/sticker more for all new machines with Windows pre-installed 8.
Please see the following link for more information.
http://www.ZDNet.com/will-BIOS-embedded-Windows-8-product-keys-cause-reinstall-troubles-7000008226/
Rehards.
-
A few weeks ago my drive hard out crapped on me and I bought a new one. I installed Vista on it and thought that I installed all the drivers. Yesterday, I had to use my bluetooth and noticed that it has not been installed. After knowing that I need a patch for it, I was able to connect my phone to my computer. But now the icon is not in the control panel so that I could easily adjust settings or view paired devices. I can only adjust the settings of the icon in the bottom left of the taskbar. Whenever I try to view paired devices I get the icon of waiting and then nothing happens.
Macuahuitl salvation,
Ø what service pack is installed on your computer?
If you don't have SP2 on your computer, you may not be able to see the icon in the control panel. Try to install SP2 on your computer and check the status.
OR
You can uninstall the device blue tooth from the Device Manager and restart the computer that will install the generic drivers, then check if the icon is listed in Control Panel.
Please post back the result.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
original title: activation problem
-I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive. He is now not letting me turn it back on. What should I do? I don't want my computer or Microsoft thinks I use a version of Windows
It is Windows 7 Home Premium, and I my here in front of me activation code. But it is to say that it is not valid.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
Loading Vista on a new hard drive
I would like to re - install Windows Vista on a new hard drive on a laptop HP Pavilion DV6000 of portable entertainment is since 2007. Now, the laptop came with Vista pre-installed. The laptop came with a system recovery disk. My question is: this disk contains Windows Vista I need to load new hard disk?
GaryRob
Yes assuming that the new hard disk is at least as large as the former, system recovery disk is exactly what you need to restore the PC as long as you plant. Simply tap on F9 you turn on with the disc in the drive and select the DVD as a source of start-up and follow on-screen prompts. You'll need to do a lot of updates, but you will have a working computer.
-
new hard drive
I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advanceHow to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
http://www.PAGESTART.com/acronisnewharddrive01.htmlThe same technique should also work for Vista.
Note: Acronis now sells their 2012 for the UI version may be slightly different.
J W Stuart: http://www.pagestart.com
-
Problems installing vista on a new hard drive
I just finished installing vista on a new hard drive, and now the computer is unable to find internet connections. any suggestion would be great!
Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.
The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.
See you soon.
Mick Murphy - Microsoft partner
-
I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.
-
* Original title: installation of windows 7
I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.
Try the following
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Press SHIFT + F10 from your keyboard
type the following commands
DISKPART
Press enter
the list volume
Next, you select the volume where you want to install Windows 7
Type: select disk #.
# represents the number of the volume
Type: clean
convert mbr
create the primary partition
assets
format fs = ntfs quick
output
output
Try to reinstall.
-
I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from. I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?
In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.
The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:
NTLDR
Boot.ini
NTDETECT.COM
Ntbootdd.sys (present/used only with older SCSI controllers)Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.
When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).
Running the command SYSTEM SET at a command prompt may shed some light on the problem...
John
-
new hard drive with the new computer
I'm going on a trip and bought a macbook air which I think I installed LR on. Now, I want to bring a new hard drive on the trip and I would like to first of all a new catalog on a new hard drive. How to create a new catalog on a mac formatted hard drive?
Connect your new drive hard (if external) for the Macbook Air
Launch Lightroom and go to the menu bar and choose:
File > new catalog
Navigate to the new hard drive and choose a new catalog name for example MyCatalog2 or what you prefer.
Then click 'create '.
When the empty catalog launches, you are ready to import pictures.
Maybe you are looking for
-
Stand alone driver for the minimal application installer MyRIO
Dear all, I'm trying to deploy a full installation package for a laboratory study, which would include: 1. exe application file compiled from a VI. This VI connects to the MyRIO via network flow. 2 labview runtime engine 3 driver for the USB LAN unit
-
Cannot download updates to silverlight, can not cancel this part of the old C:\temp\ext18866\ program what can I do?
-
Is it possible to turn off UAC for a particular program?
I'm tired of UAC. I want to disable UAC for a particular program without any application. Help me.
-
Replication of VDP - password does not not in 6.1
I replaced the old POS 6.0.2 instances with the new POS 6.1.Real backups seem to work fine, but I had 2 instances of POS replying to a one off instance of POS.I'm trying to re - set up replication (all instances are now on 6.1), but when I try to aut
-
HelloI have a big problem with Muse. Yesterday, I was working on my web site and I decided to adapt it to a version of the phone. So I make a copy of a large rectangle (not a link, an image but simply a rectangle with muse) from the House of the des