Reinstalling windows 7 after upgrading windows 10 PC Restore

try to reinstall windows 7 Home premium Service Pack 1 DVD to boot. starts with loading files, then a selection box appears but I do not have access to pointer or keyboard mouse @ the first option, this being-select country - language ect... no access to choose so I stop PC using the power button / stop. can any 1 help?

Hey did some checking in the forums and the web and found that a lot of people have had this problem and 99% of the time it was a bios problem. Make sure you also in your startup list you have the correct boot order which, for the most part, is cd, usb, hard drive, in that order. There is also an option called usb legacy list or just the usb mode to make it compatible. If you have difficulties to enter your bios, here is a list of keys

ASUS - F8
HP/Compaq - Esc
Sony - F2
Acer - F12
Gateway - F10
eMachnes - F10
Toshiba - F12
Dell - F12

NEC - F2

Make sure to go through all the lists in the bios and check to the right of the keyboard and usb ect. and he'll say: enabled or disabled. Make sure you that you save your settings before you leave.

Moreover, for some depending on your bios keyboard and mouse are on the Advanced tab.  Once again not sure how old your system is or what type of machine you have, but that's what you're looking for

Tags: Windows

Similar Questions

  • How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

    How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

    Hello

    You can download the Photoshop CS 6 from the below mentioned link.

    Download Creative Suite 6 applications

    Thank you

  • Cannot start windows, impossible to reinstall windows, can't restore windows to the external hard drive or to an earlier point in time!

    I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

    If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

    If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

    Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

    If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

    If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

    If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

    I managed the Dell Factory Restore Image but that did nothing.

    And no, I can't reinstall windows.

    I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

    If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

    If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

    Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

    If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

    If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

    If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

    I managed the Dell Factory Restore Image but that did nothing.

    And no, I can't reinstall windows.

    Hey joeccash

    If you can not restore system reinstall windows etc you may have a hardware problem

    see if you can press F12 on startup to run dell diagnostics tools

    information on the dell below link

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

    and below dell link has the factory recovery information

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

    If this does not help, try dell or a reputable computer repair persom

    Walter, the time zone traveller

  • Reinstal applications lost after upgrade to windows 8

    Hello

    I have a HP Pavilion g6-1374ea using the windows operating system 7. I have upgraded to windows 8 and lost some installed applications like youcam tools manufacturer and hp, diaognostic software also lost but were allowed to return only on the HP website.

    Yet hp partitioned my hard drive tools, so I can I reinstall any software like this partitioned drive youcam?

    Thank you

    Hello

    An clean install will erase everything, you have any backup or original source to reinstall the programs. You have to do it this way.

    Kind regards.

  • Reinstall Photoshop CS2 after upgrade to Windows 7 [as published; was: I am a retired photography sudio owner!-mod]

    When I retired, I got Photoshop CS2 on my computer. I've recently updated my computer to Windows 7 and photoshop has been removed from the computer. I think the CD I have for CS2 is an upgrade because it won't let me reinstall it. Is someone can you please tell me what I need to do to reinstall. Do I need to buy an earlier version to be able to reinstall it? Thank you

    CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    You MUST use the special version and the serial number on the page, not your original drive or serial number

    NOTE that CS2 will not install on a "modern" with an Intel Mac

    When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

  • need to reinstall Acrobat XI after upgrade windows 10 have the product key

    I had to clean my computer and lost the XI installed Acrobat, I have the serial number how do I down load?

    Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  • EliteBook 8440p: reinstall applications preinstalled after upgrade

    I had all these applications pre-installed, as the DVD Roxio Creator (not sure if it's real name) and after the upgrade to Windows 10, all of these applications have disappeared. How to make a comeback?

    MrConorAE

    Hello;

    Let me welcome you on the HP forums!

    I wish I had some good news for you, but I did not...

    These applications were for Windows 7 and they were not carried over during the Upgade because they operate not on Windows 10 - and, because your PC did not come with preinstalled Win10, HP provides no drivers or applications for Win10 for your PC.

    Here is the link to the page for Win7 drivers:

    You can choose the version of the OS you're using be, download apps and see if they will install, but they probably won't: http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=4095874 & swLangOid = 8 & swEnvOid = 4059

    Good luck

  • Reinstalling windows 7 proffesional (uk student offer)

    I bought and installed the version of teacher of windows 7 which was offered tho UK students last year and I was really happy with it, unfortunately, I had to wipe to wipe the drive two weeks because of a virus.  The virus is gone and everything works except that I can't validate windows error after that validation simply tells me that the code is not valid.  I have improved the installation of windows xp, this means that I have to reinstall xp then 7 or I have to buy another copy of windows?

    Any help would be most appreciated.

    Well im just next to the phone with technicians and the only thing they can think is that I format my pc again and install xp and then upgrade to 7.  Not going to be fun because it's the best part of a day's work.  Not a great solution, but one nevertheless.

    In the future, what I suggest you do is back up your activated copy of Windows 7 on a hard drive external. So when you need to reinstall Windows 7, just restore the active picture. It exempts the need to activate the product.

    http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  • Uninstalling Windows 7 and reinstalling Windows 7

    Windows 7 HP Pavilion (p7-1254) operating system is corrupted and I was told 'uninstall Windows 7 and reinstall Windows' using backup/restore disks did for me at the time of purchase.  I need instructions step by step to do this and want to know how/where to find this information.  Any help with this is greatly appreciated.

    Thank you very much. Link & info will help me tremendously. I really appreciate!

  • Tecra S11 - How to reinstall Windows 7 after upgrading the HARD drive?

    How to reinstall Windows 7 pro after an upgrade to 500 GB HARD drive? How to access password protected data after relocation? How can I get a professional installation of Windows 7 DVD?

    (I do not installed new HARD drive yet, but I intend)

    Hey Buddy,

    You have created the Toshiba Recovery disk? Perfect!
    After Exchange of HARD drive, you need this you to install Windows 7 disc. The Toshiba Recovery disk contains an image of the factory settings, which means that you will have the factory settings on the new HARD drive after the use of the disc. You must boot from it and follow the instructions on the screen.

    > How to access password protected data after relocation?
    It would be interesting to know what data you mean exactly.
    Before you reinstall Windows, you must back up all data on a disk for example external HARD.

  • I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

    I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

    Hi KevinRy,

    Welcome to the Microsoft Answers site!

    Unplug all external devices.

    Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

    Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

    1.

    Right-click my computerand then click Properties.

    2.

    Click the Advanced tab.

    3.

    Under Startup and recovery, click settings to open the Startup and recovery dialog box.

    4.

    Clear the automatically restart check box, and then click OK many times necessary.

    5.

    Restart your computer so that the settings take effect.

    Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

    Please reply back with the error message you get because it helps us to resolve the error.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Reinstall Windows 7 after upgrading to Vista?

    I have my old watch office that I've upgraded from Vista to Windows 7, and after 4 years I want to reinstall Windows 7 to start fresh. The Vista that was on it, I have the disc Version of OEMs and for Windows 7, I have the disk that was given to me by the technology that made the upgrade for me after that he did the upgrade. It was made by the upgrade online. J' have the product keys for both. My question is: what I have to reinstall the Vista using the disk of Vista (and key) and then go back and reinstall Windows 7 using the Windows 7 disc (and key) or can I just do a custom installation using the disc of Windows 7 only and the product key for this? I just want to wipe all of my drive and start again with nothing other than the Windows 7 above. I've moved to Windows 8 on my new computer, but want to keep my old machine running Windows 7 (I'm sure that all your diehard 7 users understand why!). Please let me know how to do this.

    Thank you

    Just make a custom installation:

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  • Reinstall Windows 7 after upgrade to 8

    Hello. I wonder if it's LEGAL to return to Windows 7 after upgrading to Windows 8. I don't know the overview of consumption, but the final version since October 25. I have a laptop HP with pre installed Windows 7. I can simply restore Windows 7 and continue without a reactivation? How would this work? And what will happen on the disk to upgrade of Windows 8? I have an image of windows 7 to reinstall. I'm not worried about windows.old folder. I was wondering about the legality of the process.

    Thank you, Andre Da Costa for all info on how to do. While it was useful, but I wanted to know if it is legal to do so.

    Perfectly legal, because the machine has obtained a license for this.

  • Hi friends, after upgrading to Windows 10 in my PC, my CC of Photoshop does not work. It is also not far. I want to uninstall Adobe CC and reinstall everything from scratch after you delete all the files. Please guide me. Thank you...

    Hi friends, after upgrading to Windows 10 in my PC, my CC of Photoshop does not work. It is also not far. I want to uninstall Adobe CC and reinstall everything from scratch after you delete all the files. Please guide me. Thank you...

    You can uninstall creative cloud, CC of Photoshop and other Adobe programs you want to remove "Programs and features" in the Panel

    Execution of other http://download.macromedia.com/SupportTools/Cleaner/win/AdobeCreativeCloudCleanerTool.exe

    Then reinstall Creative cloud link below

    Download Adobe Creative cloud apps | Free trial of Adobe CC

    Register and download the programs you need

  • Looking for a 'how-to' guide reinstall Windows Vista after upgrading motherboard

    Original title: the motherbard and cpu upgrade

    I want to install (I hope) soon new motherboard and CPU and I was looking for how to guide to reinstall vista after upgrade of the motherboard. Is it possible to get to the office without big hazzle and start reinstalling from there.

    In fact, I want to reinstall vista because I think it's much easier to try to record all programs and other settings.

    I tried to use already search funtion and it did not the asnwer I was looking for.

    I have oem (at least it says in the box) version of vista 32 bit.

    If the motherboard is exactly the same or almost exactly the same there should be no problem.  Otherwise you will want to completely reinstall Vista or even your system will contain drivers for the hardware is no longer present or missing drivers for the new hardware on the motherboard.

    "illuknisaa" wrote in the new message: * e-mail address is removed from the privacy... *

    I know how to reinstall Vista (I did this couple times) but I don't know how Vista reacts when a new motherboard is installed. I just need to reactivate vista or even will I get to the office?

Maybe you are looking for

  • MainStage3 question choking

    Hello.  Got a delicate here. I have a MacBookPro (2011) 10.11.3 running.  I7 and 8 GB of RAM.  Am a musician tourism professional running MainStage3, using keyboards provided them as MIDI controllers. Have used this system in Australia, as well as on

  • infinite loop when connecting to time warner cable

    I get an infinite loop when you try to connect, it keeps going to connect and flashing then go back to the login page.  This site allows me to watch TV via my internet connection that works normally, including HBO, pay-per-view movies, guide, etc.  C

  • Issue of table 2D

    Hello! I have two 1 d arrey for example: 1 2 3 4 5 and 6 7 8 9 10. I wan't an arrey 2D or matrix that looks like: No idea how to do it? Thanks: Kolos

  • Used to install Vista SP2. error code 800705b 3 error_requires_interactive_windowstation

    I now tried installing Vista sp2 several times and get the above error message. I have Windows Vista Home premium 32-bit with Service Pack 1. I use Google Chrome as a browser and Kaspersky Internet security as a security suite. I have a Dell Dimensio

  • 3850/3750 autonomous or Distribution stacked layer Question

    Hi all I have a client with three buildings all very close to the other dorsal 62.5 MM of fibre. They exceeded it current topology and I am trying to implement a distribution layer using a couple of 3750's or 3850's. They have already invested in Net