Related driver blue screen errors

Similar Questions

• Blue screen error caused by display driver igfx

  Origin: the title display driver igfx

  My Toshiba Satellite L305-S5907 started suddenly to do all kinds of crazy stuff, the screen was all distorted and it flickered and then it would break.  Then I had received a message indicating that the screen was confronted with a display driver igfx problem and had been recovered.  This has happened about 5 times and I was trying to see if I could get some info on the help and support page, and then the screen went black.  Now my laptop won't open at all.  I pressed the button 0 and holding it down and then through this recovery process and it will get so far and then a blue screen error appears and says that he is arrested for not to damage my laptop.  It is as far as I can get and it won't let me on my computer to get to the control panel or to download updates.  How can I return to my laptop to download the updates?

  Hi Tempol,

  Since then, you receive a bluescree and unable to boot in normal mode, you can try to boot from the Windows Vista full version installation disc and perform a startup repair.

  If restarting fails, then try a startup to restore the system from the installation disc.

  For more information, you can consult the following articles:

  What are the system recovery options in Windows Vista?

  Startup Repair: frequently asked questions

  Hope this information is useful.

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• Names of specific driver for the blue screen error Codes

  Hi all! Need your help please! Like so many others, I received Error Codes blue screen, that crash my system. I need to know the names of the specific drivers associated with these codes so that I can disable them (in accordance with the instructions of Windows), internet research has not helped. If anyone knows what are the names of the associated drivers or how to determine them it would be greatly appreciated! The error codes are:

  0x0000007E; 0XC0000005; 0X82D1F1C4; 0XF89EFB04; 0XF89EF800

  Thank you!

  Hi Anna K.

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  See also:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  Note The article above applies to Windows XP. However, you can follow the steps to solve the problem.

  If you don't have any service pack (SP) installed, please consult you may receive an error message "Stop 0x0000007E" after you enable the BitLocker Drive Encryption feature in Windows Vista

  In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.

  See use SkyDrive download collected files and post screen shot/image

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Blue Screen Error: In reference to driver Canon A410 Power? have you tried the recommended solutions and still not solved?

  Blue Screen Error: In reference to Canon A410 power? have you tried the recommended solutions, a still unresolved?

  Hello Ms. LeggsAngelhearts,

  Download and install the latest Vista compatible drivers for your camera from the link below:

  PowerShot A410 - drivers

  See also: update drivers: recommended links

  Pick up the pieces after a computer crash

• Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  I came to doday to find that a blue screen on my pc .This is the error number.

  Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  Please provide additional information on your system:
  What is your system brand and model?
  What is your version of XP and Servie Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and everything seems
  be personal information for you, just delete pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.
  While you wait for analysis, no matter what you use for protection against malware, please follow these steps:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Vista blue screen error

  Hello

  I have Vista and experiencing blue screen errors.  Here is the content of the file dump to the more recent accidents.  Help, please!

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Budd\Desktop\Mini031615-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;symsrv *symsrv.dll*c:\Windows\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: c:\windows\system32
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 6002.18881.x86fre.vistasp2_gdr.130707 - 1535
  Computer name:
  Kernel base = 0x81c0f000 PsLoadedModuleList = 0x81d26c70
  The debugging session: Mon Mar 16 21:00:37.828 2015 (UTC - 07:00)
  System Uptime: 0 days 0:00:09.500
  Loading the kernel symbols
  .........................................................
  Loading user symbols
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000007E, {c0000005, 8daf5f00, 8a95f5dc, 8a95f2d8}

  Probably caused by: memory_corruption

  Follow-up: memory_corruption
  ---------

  And the second ..................................................................................................................

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Budd\Desktop\Mini030815-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;symsrv *symsrv.dll*c:\Windows\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: c:\windows\system32
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 6002.18881.x86fre.vistasp2_gdr.130707 - 1535
  Computer name:
  Kernel base = 0x81c0a000 PsLoadedModuleList = 0x81d21c70
  The debugging session: Sun Mar 8 02:37:48.242 2015 (UTC - 07:00)
  System Uptime: 2 days 8:53:26.924
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .........
  Loading user symbols
  Loading unloaded module list
  ..................................................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {804d222c, 0, 81c3c7df, 0}

  Probably caused by: ntkrpamp.exe (nt! ExQueryPoolUsage + ca)

  Follow-up: MachineOwner
  ---------

  Another ntkrpamp error .......................................................................................................

  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Budd\Desktop\Mini031315-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;symsrv *symsrv.dll*c:\Windows\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: c:\windows\system32
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 6002.18881.x86fre.vistasp2_gdr.130707 - 1535
  Computer name:
  Kernel base = 0x81c17000 PsLoadedModuleList = 0x81d2ec70
  The debugging session: Fri Mar 13 07:49:01.229 2015 (UTC - 07:00)
  System Uptime: 2 days 12:06:39.804
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .......
  Loading user symbols
  Loading unloaded module list
  ..................................................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {9651996c, 8, 9651996c, 2}

  Probably caused by: ntkrpamp.exe (nt! KiTrap0E + cc)

  Follow-up: MachineOwner

  BS

  They are related to your nVidia video driver (yours is 2008) I remove it and install the latest driver available.  It can also be heat-related.  Please read below

  These accidents are called BCC116 and are associated with your video subsystem.  Please follow the instructions of this wiki

• Blue screen error: WERInternalMetadata.xml sysdata.xml 020314-19078 - 01.dmp

  It started just happened to me this week, I had 3 blue screen errors and function of 'reports of problems' Windows Action Center described the same files on all 3 tests.

  1 blue error screen:
  Windows

  Problem: To stop unexpectedly

  Files helping to describe the problem:

  010914-17940 - 01.dmp

  SysData. XML

  WERInternalMetadata.xml
  2nd Blue error screen:
  Windows

  Problem: To stop unexpectedly

  Files helping to describe the problem:

  020414-17596 - 01.dmp

  SysData. XML

  WERInternalMetadata.xml
  3rd error on a blue screen:
  Windows

  Problem: To stop unexpectedly

  Files helping to describe the problem:

  020314-19078 - 01.dmp

  SysData. XML

  WERInternalMetadata.xml
  I don't know what could be the cause that I have not made major adjustments to my computer recently.  Any ideas?
  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run this test to find out which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

• Blue screen error uninstall a program

  Hello
  I get a blue error screen uninstall programs.
  On August 11, I got error on blue screen during the uninstallation of a program 'futuremark systemInfo' (don't know where it comes from, I has not installed) then I started in safe mode and uninstalled the program.
  Now today August 14, I got a blue screen error again during the uninstallation of 6 of the Eset. Then I tried to boot into safe mode with network and it has failed and restarted normally.
  * He showed the error when the uninstall program was underway about uninstalling drivers.
  Here's this .dmp file in windows/minidump
  11 August minidump(http://goo.gl/V9R4jd)
  14 August minidump(http://goo.gl/VR4n4M)
  Now when I go to safe mode to uninstall a program it shows that he used to uninstall it in safe mode as install windows service is not running.
  Help, please!

  I'm not an expert on this subject, I just took a shot with bluescreenview along with a dmp online Analyzer

  PACER.sys is mentioned a lot which seems to be the driver of the QoS Packet Scheduler
  Problem could be related to Eset or your network driver, try to disable your antivirus and network drivers before uninstall it and if it works install another version of the driver
  It's just a guess

• Hi friends, I find this blue screen error more than 1This per day, please help me ♥

  problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 locale ID: 1065 of additional information about the problem: BCCode: 1000008e BCP1: C0000005 BCP2: 919D 0976 BCP3: 94FD2C38 BCP4: 00000000 OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1 files that help describe the problem: C:\Windows\Minidump\040113-30656-01.dmp C:\Users\ehsan\AppData\Local\Temp\WER-54187-0.sysdata.xml

  Hello

  You have installed new hardware on your computer recently? If so, then it would certainly be one of the factors behind the Blue Screen of Death (BSOD). More often than otherwise, BSOD is related to the driver incompatible, withdrawal which solves the problem.

  When exactly do you get the error message?

  We will log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). In addition, we will check for other updates for the device driver.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  See also the following link:

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  In addition thereUO can also Zip or download the content of the C:\Windows\minidump in Sky Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  Back with the information so that we can help you further.

• Blue screen "ERROR in REGISTRY"

  I got a blue screen "REGISTRY ERROR" and here are the details of this one:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  
  

  More information about the problem:

  BCCode: 51

  BCP1: 0000000000000001

  BCP2: FFFFF8A000024010

  BCP3: 00000000011 TO 3000

  BCP4: 0000000000000374

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  
  

  Files helping to describe the problem:

  C:\Windows\Minidump\021813-15724-01.dmp

  C:\Users\CeeKei\AppData\Local\Temp\WER-48594-0.SysData.XML
  Here is a link of the minidump collected:
  https://SkyDrive.live.com/redir?RESID=92D7D2B86140AD12! 115 & authkey =! YEAR-VIMKeZ6QHxow
  I would greatly appreciate any help you guys can extend. Thanks in advance! :)

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I understand that you get the blue screen on the computer windows 7.  Let me help you with the issue.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. when exactly you get the blue screen?

  4. have you made changes on the computer recently?

  To resolve this issue, let us try these methods:

  Method 1.

  Disconnect any external devices and restart the computer to check the status.

  Method 2.

  You can read this article to check the status.

  Resolution in Windows 7 stop errors (blue screen): http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Warning check disk.

  Important: While performing the check disk on the hard disk, if bad sectors are, check the drive will try to repair this sector. All the data available in this area may be lost.

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• My computer crashes from time to time, and sometimes I have the blue screen errors.

  I am running Win 7 on a 2 years old HP Pavilion. I started having occasional blue screen errors, and some applications are a little weird. I haven't added anything recently except the recommended Windows updates. Now when I try to stop, it just display the closing, and I pressed the power switch. I tried to restore to an earlier time a few times in the last 90 days. Suggestions, or I need to reload Windows? If a reload is correct, can I charge for the recovery through my recovery cd partition?  My processor is an AMD Phenom 2.90 GB with 4 GB of ram, Win Home Premium software. Thank you... Joe

  I think that your problem is related to your wireless network connection.

  Send a copy of your dumpfile as a shared folder on your drive of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To get tips on how to configure your system to create dump files please read:
   http://support.Microsoft.com/kb/254649

  The dumpfile will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  Please download and run the display driver and download a copy of the report he produced on your sky player
  http://www.NirSoft.NET/utils/DriverView.html

  Please download copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events as and give the file a name. Do the same for the application log.

• Blue screen error on the Satellite A100 - 920 (PSAA9)

  Hello

  I got a blue screen error during use normal and after reboot, Windows suggested updated the BIOS, so I've updated with the latest version (5.10). The next day, I got another blue screen and reboot, Windows has suggested that I update my display drivers, I did (to Ver. 8.241)... I have an ATI Radeon X 1400 GPUS. After that, the computer crashed every time that it loaded windows, with a popup on services.exe telling me the computer shuts off in 60 seconds.

  I assumed that this was linked to the display driver, so I replaced the drivers with a version earlier than day (8.241 - 034065C). Once I did, it seemed to work and I could use the computer very well for a bit, even play games like GTA, but I'm starting to take again the blue screens, usually just at the opening of the files, etc. and not when you run graphical applications with a lot. The problem disappeared when I turn off my display drivers, but which is not really a solution.
  I disabled the reboot on the parameter of the error and it is information of the blue screen of death:
  STOP: 0X0000008E (0XC0000005, 0XEE6DF5E9, 0XBAD2F99C, 0X00000000)
  System32:huy32.sys - address EE6DF5E9 base at EE6DD000, Datestamp 45abe717

  Anyone have an idea how I can solve this problem, it makes me crazy!
  I downloaded the map Omega drivers, but am slow to install that I heard that they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without having to use third-party drivers myself.

  Hello

  One question: do you use Antivirus applications and you did update the Windows operating system?
  You said something about services.exe you indicating the computer turns off in 60 seconds.

  For me, this looks like a virus! I also google for system32:huy32.sys some people said it s a malware!
  I m not 100% sure, but maybe you have some virus you OS!

  Now to the question of pilot you: Yes, Toshiba recommend that you use a clean graphics drivers on the Toshiba site. The use of original graphics drivers on the Web site of graphics card manufacturer is not recommended.
  But I read a lot of thread on the omega drivers and many users using the drivers and they have no problems.

• Blue screen error - recovery problem (STOP: 0 x 00008086)

  I am working on a Toshiba Satellite laptop and need to recover to original state. I have no recovery disks, however, I followed the Toshiba 'How' instructions (F8, and then select repair your computer), it displays the progress of Windows bar then goes to a black screen for a while and then I get a blue screen error (STOP: 0 x 00008086).

  Is there a way to get around this?

  N ° if drive HARD recovery cannot start on the regular basis there is no trick to make it work.

  To the factory settings, you need Toshiba DVD recovery.

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.