relationship bewteen workstation and the primary domain failed

Similar Questions

• I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

  Hi all

  I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

  I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

  I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

  Are there other sources, that I need to check? This is getting frustrating.

  Thank you much for the help.

  Sincerely,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• When you connect to Windows 7, get the error "the trust relationship between this workstation and the primary domain failed."

  You open a session in Windows 7, you get an error stating "the trust relationship between this workstation and the primary domain failed."
  Can someone help me please...

  AC of Phil wrote:
  > As you connect to Windows 7 you get an error saying "the trust relationship.
  ' > between this workstation and the primary domain failed.
  > Can someone help me please...

  Contact your domain administrator for the domain of the computer account
  recreated or reactivated, as appropriate.

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• The trust relationship between this workstation and the primary domain failed.

  The trust relationship between this workstation and the primary domain failed.  This only happens on the Windows 7 desktop.  It is sporadic.   Add the computer account to the domain is not a viable solution.  It happens far too often.

  There is nothing coherent we found on systems that are removed from the field.  Some time its workstations users, sometimes its laptops to students and sometimes he posts of laboratory work.  Different types of systems use different images.  All images are syspreped before creating the image.

  Hi Geoffrey,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question on the Technet Windows 7 Security Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the trust relationship between this machine and the primary domain failed

  Hi I have a virtual server (Server 03) with a vista machine, I can log on to the vista computer, but it happens with the trust relationship between this machine and primary domain failed. I tried to delete the domain vista machine, but he says you need to keep a main area

  Any suggestions gratefully received

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  Hi João,.

  To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

  Click the Microsoft KB Article below for troubleshooting steps.

  The trust relationship between this workstation and the primary domain failed

  Let us know how it goes.

  Thank you

• The trust relationship between this workstation primary domain failed

  During log on, I am faced with an error "of the trust relationship between this workstation primary domain failed. If I disconnect the connection to the local network, then I lon on. What is the permanent solution easily?

  Hi Laurent,.

  This error message can occur if the computer is not connected to the same domain (or is connected to a working group) which is connected to the server computer (or the field on which is connected to the computer that is running Active Directory). Additional assistance can be provided the forum TechNet Service directory.

  "The relationship between this workstation and the primary domain failed approval" error on a computer that is running Windows 7 or Windows Server 2008 R2

  https://support.Microsoft.com/kb/2914474/en-us?WA=wsignin1.0

  You can post the question on the TechNet link below.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverDS

  Let us know if you need assistance on our part.

• The relationship between workstation and domain fails approval

  In our environment, we have Windows Server 2008 with Windows 7 machines. Lately some Windows 7 machines have received the error that does not have a trust relationship between workstation and domain and users are unable to connect to the machine. We know a fix by removing the machine in the field and join again the machine. I am currently trying to find the cause of this problem, your help will be appreciated.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is linked to a domain environment and Windows Server and would be best suited in MS TechNetWindows Server Forum orTechnet Windows 7 Security Forum. Please visit this link to find a community that will provide the support you want. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error, 'relationship between the workstation and the field has no confidence. "

  I have a 2003 domain controller, this a job gives me an error "trust in relationship between the workstation and the domain failed" so I read I have to reset the server, remove the object and remove the workstation from the domain, but my problem is that I can not even log in as administrator to do. My admin login details work perfect on other machines, but not this one. Help, please!

  On computers that are connected to a domain, you always have the choice to get authenticated by the controller of domain or the local computer. You must select the local computer, and then use a local administrator account.

• Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Install the new SATA drive and the primary drive Clone which he

  After reading many messages from hard drive yesterday and the manual for my Dimension 4600, I bought a Western Digital 250 GB SATA internal drive which will become the secondary drive through Dell. My first is a 40 GB with 14 GB of free space. I am a student of site design Web and must use Adobe Creative Suite CS3, including PhotoShop, Dreamweaver, etc., which is a huge program. Technology Department told me that I could load the program Adobe Creative Suite CS3 on the new secondary drive and my images and other Documents which I will use to create Web sites for school. I could load MicroSoft Office 2007 as well if it is a good idea.

  What is a reasonable secondary use of a hard drive?  Is this a good practice? Benefits; Disadvantages?

  If the primary drive fails in the future, it is possible to just load Windows XP, etc on the new secondary disk at this time and the report on? Or I need to remove Adobe Creative Suite, MicroSoft Office, my pictures, etc., before I could load the operating system? I have a 60 GB external USB drive for backup of Documents and Settings.

  Dell Dimension 4600 (Pentium 4 CPU 2 .8GHz, memory 3 GB RAM) running MS Windows Home XP, SP 3.

  Any other good suggestions for the use of a Seconday drive in my case?

  Message edited by Tennis_8 on 05/21/2008 09:53
  
  

• Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  My main.js resembles

  xmlDataSource var = {}
   
  URL: 'dcds. - symbianxml.aspx", etc. (sample).
   
  init: function() {}
  URL, successful reminder, the reminder of failure
  This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
  },
   
  /**
  * Analyzes the XML document in an array of JS objects
  @param xmlDoc XML Document
  * @returns {table} array of objects of the device
  */
  parseResponse: {function (xmlDoc)}
      
  var chElements = xmlDoc.getElementsByTagName ("channel");
     
  channels of var = [];
    
  Console.log (chElements.Length);
    
  for (var i = 0; i)< chelements.length;="">
      
  var channel = {};
     
  for (var j = 0; j)< chelements[i].childnodes.length;="">
      
  var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
              
  If (node.nodeType! = 1) {//not an element node}
  continue;
  }
         
  Channel [node. TagName] = node.textContent;
  }
     
  Channels.push (Channel);
  }
  Console.log (Channels.Length);
  return the strings;
  },
   
  /**
  Manages the response and displays the data from device web app
  @param xmlDoc
  */
  responseHandler: {function (xmlDoc)}
    
  var channel = this.parseResponse (xmlDoc);
  var markup = "";
     
  for (i = 0; i< channels.length;="">
     
  markup += this.generateHTMLMarkup (i, channels [i]);
  }
  document.getElementById("accordian").innerHTML = mark-up;
  },
   
  /**
  Generates HTML tags to insert in to the DOM Web App.
  * @index i, index of the device
  @param device, device object
  */
  /*
  generateHTMLMarkup: function (i, channel) {}
    
  var str ="";
  "Str += '.

  
  ' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
  "mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
  "" Str += "" + channel ['name'] + ' ";
  "Str += '.
  ";
  "Str += '.

  ";
  "Str += '.

  "+" id: "+ channel ['id'] +" ' "

  ";
  "Str += '.

  "+" type: "+ channel ['type'] +" ' "

  ";
  "Str += '.

  "+" language: "+ channel ['language'] +" ' "

  ";
  "Str += '.

  «+ "bandwidth:" + "fast" channel + "»»

  ";
  "Str += '.

  "+" cellnapid: "+ channel ["cellnapid"] +". "

  ";
  "Str += '.

  «+ ' link: '+'start the video »»

  ";
  "Str += '.
  ";
  return str;
  },*/
  generateHTMLMarkup: function (i, channel) {}
     
  var str ="";
  "Str += '.
  ";
  str +=  "" +
  "" + channel ['name'] + ""+""
  ";
  "Str += '.
  «+ ' link: '+'start the video »»
  ";
       
  return str;

  },
   
  failureHandler: {function (reason)}
  document.getElementById("accordian").innerHTML = "could not get XML document.
  '+ reason;
  },
   
  /**
  Retrieves a resource XML in the given URL using XMLHttpRequest.
  @param url URL of the XML resource to retrieve
  @param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
  @param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
  */

  Connect: {function (url, successCb, failCb)
    
  var XMLHTTP = new XMLHttpRequest();
    
  XMLHTTP. Open ("GET", url, true);

  xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
  xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
  xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
    
  var that = this;
  XMLHTTP.onreadystatechange = function() {}
     
  If (xmlhttp.readyState == 4) {}
      
  If (XMLHTTP. Status == 200) {}
       
  {if (!) XMLHTTP.responseXML)}
  try {}
  If server has not responded with good an XML MIME type.
  var domParser = new DOMParser();
  var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
         
  successCb.call (that, xmlDoc);
         
  } catch (e) {}
  failCb.call (, "answer was not in an XML format.");
  }
            
  } else {}
  successCb.call (that, xmlhttp.responseXML);
  }
  } else {}
  failCb.call (this, "connection failed: status"+ xmlhttp.status ");
  }
  }
  };
  XMLHTTP. Send();
  }
  };

  Please see the content in main.js is fully analyzed.

  Forward for the solution to my request all members of the community...

• N300 wireless Extender - using the Extender Network and the primary network

  Is it possible to use the wireless N300 extender only in areas where it is needed and the main network elsewhere?

  I want to be able to use to boost the signal to a smart TV via an ethernet cable, but want to use my main network in the rest of the House where I can get faster speeds.

  At the moment he seems to want to connect to all devices in the House.

  Hello elies

  If you your extensor different SSID name of your primary network, you can decided which devices connect to the Extender and those which connect to the main network.

  DarrenM

• How to turn on the firewall on the primary domain controller (AD)

  Once I deployed AD and ADC (additional domain controller) for a single client. It worked well for 4 months. But now I sudddenly has received a call from the customer that the firewall of its DC broke down and could turn on the firewall. He said something like "error 1068: the dependency service or group could start" when I try to turn on the windows firewall. It's mission critical servers and quick responses are welcome.

  Hi Darpandeep,

  The question you have posted is related to the management of the Windows network and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope this helps.

• Difference between the workstation and the machines virtual ESXi?

  Apart from convert vmdk of thin thickness oversupply, what exactly does the download feature in WS 8 and later versions do, vs, simply by making a copy + paste of the virtual machine to the machine running Workstation in the ESXi data store?

  Besides, why Upload even converts vmdk of thin thickness providing? You can create native thin disks configured in ESXi is not as if ESXi does not support the feature...

  VMware Workstation is not (cannot) use a provisioning. The hard format is a fragmented file format that contains metadata about the blocks of data used in the file itself. This format is not supported with ESXi, and this is why it must be converted.

  André