RelavantKnowledge has stopped working during the installation of updates

Similar Questions

• Outlook 2010 has stopped working after the installation of updates

  10/11/2015 my system (Windows 7 Ultimate) undertook an update of 15 files.

  After the reboot, I started Outlook 2010 and found that he had stopped working.

  I have tried several things to correct, but none worked.

  I did a system restore to remove all updates and Outlook now works.

  One of these updates has a problem with Outlook, but I don't know which.

  I need help please.

  After you have uninstalled Outlook KB3097877 works very well.

  It has something to do with emails with HTML links in them.

• HDTV display has stopped working after the installation of El Capitan

  After the upgrade to El Capitan, the already functional and unproblematic mirroring the display of my iMac OSX for Panasonic HD TV has stopped communicating and the TV screen is blank! There is no options available when you select Preferences / display. No settings have been changed for Mac or TV before too, or after the upgrade!

  Hello Macthewife,

  Thank you for using communities of Apple Support.

  I see after update to El Capitan, you have problems mirroring to a HD TV. I suggest the following article to ensure that it is configured correctly and in the "Get help" section, there are a few suggestions if this does not work properly after installation.

  Use AirPlay to view a video of your Mac on a HDTV

  Best regards.

• game Launcher has stopped working during the loading of Oberon

  Game on my WIndows Visa Launcher has stopped working when I tried to load a game of Oberon

  jbradshaw_5
  If you experience the issue where game Launcher stops working when you try to load a game Oberon, follow these steps:
  1 left-click on start
  2 - right click on computer
  3. left-click on properties
  4. left click on advanced
  5 - running, click settings
  6 - left click on Data Execution Prevention)
  7 - click on turn on DEP for essential windows only and services programs.
  8. click on apply and then OK.

  UAC: (User Account Control)
  Open Control Panel, and then open user accounts.
  You will see the link for "turn User Account Control (UAC) or not". Until it clicks.
  Uncheck the box and restart your computer.

  It is just a suggestion, try and let us know if it works for you.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Display driver has stopped working during the game the Sims 3

  Original title: video card? With the Sims 3 ~.

  I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

  -Poprocks26

  I thought about it, are not even worry about this.

  I just needed an update from Intel. It works perfectly now. :]

• WEBCAM PROGRAM STIIL STOPS WORKING AFTER THE INSTALLATION OF UPDATE

  I installed the update Windows suggests for the Logitech software, but there is like until LSW has stopped working when I click the icon.  It works very well in a chat room but I can't access the software to make my own videos and pictures.  Logitech said the problem is is the registry of the computer.  How can I fix it?    How can I access the registry to repair or do I have to consider and have it fixed?

  Hello
   
  I suggest you do a System Restore to the point before the update.

• My guest user account has stopped working after the installation of several windows and IE9 updates.

  I recently installed several windows and IE9 updates. During the install IE9 I stopped the installation process, because it seemed that I had two IE9 installs go. I ended up cancelling the installation so IE9 has not installed. I tried to install IE9 again and this time I can't stop installation, and it has been successful. I checked the other user profiles to make sure that everything has been installed, and that's when I noticed that my guest account wasn't just all users accounts were working well.

  Whenever I try to open a program, for example: Internet explore, any Office program and even the calculator another window opens asking me to manually locate the file I'm looking for. I am able to locate the file and open it, but as soon as I close I can't reopen unless I have to manually search for the file. There is a checkbox indicating that it automatically uses this file with the program but I can't check the box (its in a light gray that I can't click on) and I don't want to manually search the file everytime I open a program. I tried using a restore point before updates, but which did not set can guest account everyone please help?

  [1] I need to correct me by declaring that the Mcafee subscription is 18 months and its due for renewal in June, then yes its still the preinstalled version.

  [2] will certainly be your advice on that. Should what drivers I roll back?

  [3] I thought to go on this forum first, but I chose it because the error occurred while I was updating, but I'll post my question it too

  A1A. Ah! The application is named McAfee Security Center by chance?

  A1B. Do you plan to purchase a subscription for this or any other McAfee application (which you would need to do so BEFORE the expiry of 18 months 'advance')?

  A2. In re the restore drivers, you restore the drivers that you have installed via Windows Update. that is, Intel G45/G43 Express Chipset (graphics driver or screen) and Realtek PCIe GBE Family Controller (NIC driver). Again, this is a long shot.

  A3. Please do that start new thread immediately.

• I use the mouse for scrolling wheel. It stopped working during the installation of the V4.

  I use the mouse wheel to scroll on my desk and the button of "middle" in conjunction with the pointer on my laptop (lenovo thinkpad W500) node to simulate a mouse wheel. At the point in time, I upgraded firefox to V4, this function stop working. I tried it in IE and it still works there, and it still works in swriter OpenOffiice.org , so it is not something has changed in the hardware or the operating system (XP). Any suggestions?

  Try this:
  
  Type of topic: config in the address bar, press ENTER, Firefox asks if you want to access the settings, say yes you know the risk.

  When the list of configurations to come, type track point in the filter area, you will see a frame ui.trackpoint_hack.enabled , that change from-1 to 1. Now you should be able to scroll through the help of trackpoint and the Center button of the mouse on the trackpad again.

• How to fix 'error message' installation of windows services stops working during the installation!

  Windows Vista Edition Home Premium

  service pack 2

  Toshiba

  satellite A135

  32 - bit operating system

  Hello

  1. Once you get the error message?
  2. What is the full error message?
  3. what program or the application you are trying to install?
  4. have you done any software or hardware changes on your computer before this problem?
  5 is the issue limited to a particular application?
   
  To work on the issue, check the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  
  http://support.Microsoft.com/kb/2438651
   
  See the steps mentioned under Windows Installer issues in the RESOLUTION section.
   
  Check if it helps.

• HP passport fingerprint reader has stopped working after the installation of the update

  give me message connect reader... don't know what it means

  I installed the new update from the HP site and the drive does not work, it was working before the update

  Go to the driver page and watch the SimplePass you downloaded. In the title you see a link for example (Previous versions available)? If so click on it and it will show you an older version.

• My device audio stop working after the installation of update security for Windows 7 for x 64-based systems (KB2286198)

  Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).

  Thank you!

  I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:

  In

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\

  The 'Control' key with a string value 'ActiveService "=' Modem' was absent.

  Also in

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001

  I added a 'Control' button with a string value "ActiveService" is"ksthunk".

  Finally, I restart my system and Windows again recognizes my camera and the driver installed!

  Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.

  I hope this helps someone!

  NOW I'M GOING TO TURN OFF WINDOWS UPDATES!

• The mouse stop working after the installation of updates

  Have Windows Vista on laptop. Important Windows Update installed today. Have not installed the optional updates. Restarted the computer. The mouse no longer works. Control Panel - mouse shows only Synaptics touchpad installed.  How to operate the mouse?

  Hello

  1. what day you're talking about?

  2. What is the brand and model of the mouse?

  3 have you tried any other mouse to connect to the computer of the question?

  4. have you tried to connect the mouse to any other computer?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Try to update the drivers mouse and chipset and check if it works very well.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My iMessage has stopped working after the installation of Office, how can I fix?

  It's the first time that I've already posted a question on a forum so please be nice! I'm in the right place? I need help with my iMessage on my Macbook air. I installed Microsoft Office 365 personal and he stopped my iMessage don't work, no messages in or out. Any ideas? Should I give more details?

  What version of Mac OS X? (   . APPLE menu > about this Mac)

• BlackBerry Z10 Print to Go has stopped working after the installation of KB2992611 on Windows 7 for x 64 system

  A large number of reviews and safety notice associated Microsoft updates showed in place on November 11, 2014 that were installed. Subsequently several failures that happened after the reboot (i.e. IE would freeze at start-up, Print to Go

  the stoppage of work - has indicated that there is no connection to the Internet, the PrintToGoLog.txt had much more detail).

  Other users of similar problem after a reported BB playbook KB2992611 updates has been applied,

  After KB2992611 (a security update for Windows 7 for x 64 system) has been uninstalled, Print To Go was working properly. Unfortunately, it is still not. Firefox is OK.

  Thanks for the info, this will help others with the same question.

  That KB was for all windows systems, but was mainly for Win Vista business.

  You can reset IE in Internet properties, program tab, or download another or do a system restore to November 10.

  Firefox is not affected because it is not incorporated in the system as IE.

• Music files stopped working during the installation of new equipment

  I recently connected my Logitech speakers on my computer (which should have no effect on what I'm about to ask, but...), and immediately after that I finished installing the new equipment, every single MP3 on my computer started acting funky.  For some 5 seconds will play in crappy quality, then he spends a little and stop playing altogether, even if Media Player says that he always plays.  Oddly enough, once the sound stops playing, it also displays the timer is going slower.  This is for all my audio files that I put on my computer.  I've never seen anything like this.  If you need more information, just ask, but I want as my dang back music.

  The following article might be worth a visit:

  Windows Vista - How can I stop my music skip or break down when I play?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it