Reliance net connector on windows 7, it's show Error 711.

Similar Questions

• What window updated each time showing error code 00000646 nearly a month what is the solution

  What window updated each time showing error code 00000646 nearly a month what is the solution

  Thank you

  msiddique

  Gives it a try and see if it solves the problem.... http://support.Microsoft.com/kb/2258121

  Let us know if this helped

• OverDrive Media console the DRM from Windows Media Player version shows < error > 0 x 80070057: The Parameteer is incorrect.

  Original title:

  Windows Media DRM player

  In Overdrive Media console software, the version of Windows Media Player DRM shows and I get an error 0 x 80070057: The Parameteer is incorrect.  Which should solve this problem? I'm on windows 7 Professional and Windows Media Player 12

  Hello
   
   
  Check the permissions of the file or folder, the file is saved in. Also check if the file is encrypted.
  Check out the following link and check:
  How to open a file if I get an access denied message?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message
   
  Also, please contact OverDrive: http://overdrive.com/contactus/.
   
   
  I hope that helps!
   

• Windows backup default - Eventvwr shows error on \Device\Ide\IdePort0 controller

  Hello

  I'm at my wits end. I got the error 0 x 81000037 when you run backups windows recently. I am backing up to an external USB drive.

  I went through the entire analysis point fix, I run scans antivirus complete and deleted all quarantines and I have now deleted all audio-visual products. I tried to back up selected folders, clean boots and I'm still not able to run a backup. However, I'm now not only this error code, but others.

  Looking at the event viewer, it seems that each backup error is preceded by 11 on atapi event: «the pilot detected an error on \Device\Ide\IdePort0 controller»

  I don't know what it is, but I wonder if this is what is at the origin of the problems, and if so, is this a problem with the external USB HARD drive or internal one.

  Can anyone help? I'm desperate to save my files.

  Hello

  You might face this question when the competent services for backup are not running, you can also face this question when the chipset drivers are corrupt. Make sure you don't have any other external device connected to your computer outside of the mouse and keyboard. I suggest you to make sure that the following services are running and set to automatic.

  Shadow copy volume

  • Windows backup service
  • Engine block of backup Service level
  • Windows event log
  • Task Scheduler
  • Click Start, click in the start, Search , type services.mscand then press enter and then check the benefits described above, one by one.
  • You can follow the steps in the link below and check if it helps you.
  • Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  • http://support.Microsoft.com/kb/973455

  You can also consult the steps proposed by Stephanie Podder dated 8 June 2013 , the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/event-ID-11-source-ATAPI-the-driver-detected-a/1c45a710-596f-468C-970D-74858d0a96b6

  Let us know if you need additional help from us.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Net-broadcast event window 2.0.0 is 'end now' when I turn off the computer

  Every time I shut down the computer 'end now' comes up with net-broadcast event windows 2.0.0 and also hidden shellcon

  comes up "end now".  What is and how to remove it?

  Hi Kwatts45,

  Please contact Microsoft Community.

  According to the description, it seems that you get the 'Net-broadcast event 2.0.0 window' when you try to shut down the computer.

  However, we need more information.

  Please help me to answer these questions.

  1 did you install .net or programs in visual studio?

  2 have had any changes made to the computer before the question?

  I have a couple of steps that should help you with this problem.

  Method 1:

  Check if the problem persists when the computer is in clean boot by referring to the following article.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Put the normal computer as stated in article 310353 How to configure Windows to use a Normal startup state .

  Method 2:

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Hope this information helps. Answer us queries windows and we will be happy to help.

• Connector for Windows RT

  Hi, is there any news on the connector for Windows RT? I use a such Tablet for a while now and I really miss the function in order to use our environment vd. Best regards, Martijn (vggm)

  Hello Martijn,

  Unfortunately, currently we don't have a release date for connector Windows RT, but it has already been brought to the attention of our development team.

  Best regards

  Murat Coskun

• Instructions for the removal and reinstallation of .NET Framework on windows xp 32-bit

  I need full instructions with links of web page to remove all versions of net and then put it back.  I have a copy of an e-mail that has it all, but I don't know how to get my copy in a document where I can use the web links.

  You must may (or may not) .NET Framework 1.1.

  Of http://blogs.msdn.com/b/astebner/archive/2009/04/20/9557946.aspx

  Most of the applications that have been created for the .NET Framework 1.0 or 1.1 will automatically use the .NET Framework 2.0 instead if it is installed on the system.  In most cases, this means that you do not need to keep the .NET Framework 1.0 or 1.1 is installed on your system if you have already installed .NET Framework 2.0.

  However, there are some applications that are configured to require a specific version of the .NET Framework, even if later versions of the .NET Framework installed.  If you have any application like this on your system and try to run without having to install the .NET Framework 1.0 or 1.1, you will get an error message that resembles the following:

  ---------------------------
  MyApplication.exe - .NET Framework initialization error
  ---------------------------
  To run this application, you first must install one of the following versions of the .NET Framework:
  v1.1.4322
  Contact your application Publisher for instructions about obtaining the appropriate version of the .NET Framework.
  ---------------------------
  Ok
  ---------------------------

  In the above error message, the version number will be v1.0.3705 if you install the .NET Framework 1.0, and it will be v1.1.4322 if you need to install .NET Framework 1.1.

  If you end up seeing error messages like this one, you can re - install the .NET Framework 1.0 or 1.1 in order to fix the errors.  If you end up seeing errors like this, then you don't need to worry about re - install the .NET Framework 1.0 or 1.1.

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• Code 66A Windows update encountered an unknown error

  I tried the system restore and it created more problems. So I undid the restorations

  * original title - update of Windows Code 66 has encountered an unknown error. A security update for NET Framework on windows XP Server 2003, windows vista, windows windows Server 2008 7, windows server 2008 R2 for a based 64 2160841 KB System *.

  Please see the following thread for answers: http://social.answers.microsoft.com/Forums/en/vistawu/thread/1307e399-8997-41c4-9d3b-24f872425148 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

  I have THREE questions which PEUVENT all be linked togther... What do you think?

  [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
  I've upgraded from Vista about 3 weeks ago.

  #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
  To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

  #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

  .. .and it fails every time, it tries to install saying this:

  Windows Update - failed

  Code 643 Windows Update encountered an unknown error.

  "Get help with this error" provides little or no help... but it says this:
   "WindowsUpdate_00000643" "WindowsUpdate_dt000"
  
  All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

  #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
  He cycles most of the way through, then he Has STOPPED and says this:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

  • Windows needs to be restarted if necessary to system files can be changed before you continue.

    Does not help restart. He tried 3 times and he ends up doing the same thing.
    Is it possible I deleted something out of the register so far here and which is cause of all this?
    If so, is it possible to fix WITHOUT doing a new install of Windows 7?
    OR... anything can be a problem... Please HELP!

    (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

    Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4
    

  Erwan,
  You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista - Error Code: Windows Update encountered an unknown error

  When you use Windows Update on my computer the program informs me that there is an important update for my computer.  After clicking on the "install updates" button
  After that, he says:
  Update 1 of 1
  Microsoft. NET Framework 1.1 Service Pack 1 update for Windows.

  Then he informed me that the updates were not installed and comes up with:

  Update code 643 Windows has encountered an unknown error.

  I tried to manually install Service Pack 2 on the microsoft site as suggested in a convenience store for the errors that occur during updates, but this does not appear to have solved the problem.

  You can provide any assistance would be greatly appreciated.

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://msdn.Microsoft.com/en-us/KB/kb00318785.aspx

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After running the cleaning of .NET Framework (not the Windows Installer Cleanup utility) tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  
  PS: I think you have worse problems, Phil: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/856d02a2-837c-4e10-ad51-82039bf5c166
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to update Windows Vista, Error code: 800B 001, "Windows has encountered an unknown error.

  Its been a while now that I can't download and update my Windows Vista Home Premium(64-bit), every time I click on install updates, it starts to download the updates, and when its done and the error occurs, code error: 800 B 001, "Windows has encountered an unknown error" and when when I try again... Error code: 80240016, "Windows update currently installed other updates. Please try again later in a few minutes. »
  I downloaded the update Windows Vista SP2 site Web Microsofts (Yes, im still in SP1), thinking it could slove the question, I can not install, when I clicked to install it, it says: "the form specified for the subject is not one supported or known by the specified trust provider."

  My Vista is genuine and activated, came with my laptop HP HDX16 1050EE.
  This issue has been hard for awhile and its a little boring.
  Thanks in advance.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. (No, Symantec Support never say this.) See if the following solves your problems:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  8 test cycle.

  NB: Your Norton application can disable Windows Defender by default.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. It can indeed not necessary it and
  be able to make a right click on it and HIDE. Let us know what the update is so we can help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I tried for weeks install windows updates and get this message error (s) found: code 80070645 windows has encountered an unknown error. How can I solve this problem?

  Windows Update
  Error (s) found: code 80070645 windows has encountered an unknown error.
  I had before the shock of two antivirus this proven system restoration started but no help.
  Fix it to charge microsoft, but has not helped any.

  How can we if this problem, so I can install the updates I need?

  Hi Wyattsdaddy,

  Thanks for posting your question.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Item appraised: http://support.Microsoft.com/default.aspx/KB/822798

  Step 5: Disable the security software
  Note: You can enable it later.
  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  http://support.Microsoft.com/kb/949104/

  Step 7: Components to reset Windows Update
  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.