Reloading IOS 1310

Hi, there was a BIG mistake, we erased the IOS in the AP1310, a knowledge he does not start because there do not have an IOS image.

I got the new image, but I do not know the steps I should follow to reload the IOS system a TFTP server.

Hi Paul,.

We all make mistakes, so no worries!

Reload the Image of Point of access/Bridge (adapted Edited)

Using the CLI

http://www.Cisco.com/en/us/products/ps5861/products_configuration_guide_chapter09186a00804ed72c.html#wp1071147

Step 1 open the CLI using a connection or a Telnet session to port console access point.

Step 2 Reboot the access point by removing power and reapplying power.

Step 3 let the boot of access point until it begins to swell the image. When you see these lines on the CLI, press Esc:

Loading "flash:/c1310-k9w7-mx.v122_13_ja.20031010/c1310-k9w7-mx.v122_13_ja.20031010".

...###########################################

Note according to the software emulation of terminal you are using, you may need to press ESC twice to access the boot loader.

Step 4 when the bridge: command prompt appears, enter the set command to assign an IP address, subnet mask and Gateway default to the access point.

Note You must use uppercase characters when you enter options IP-ADDR, NETWORK and DEFAULT_ROUTER mask with the set command.

Your entries might look like this example:

AP: value 192.168.133.160 IP_ADDR

AP: the value of 255.255.255.0 subnet mask

AP: set DEFAULT_ROUTER 192.168.133.1

Step 5 enter the command tftp_init to prepare the access point for TFTP.

AP: tftp_init

Step 6, enter the "tar" command to load and inflate the new image to your TFTP server. The order must include this information:

the option - such, which inflates the image when it is charged

the IP address of your TFTP server

the directory on the TFTP server containing the image

the name of the image

the destination of the image (the access point Flash)

Your entry might look like this example:

AP: tar - suchftp://192.168.130.222/images/c1310-k9w7-tar.122_15.JA1 flash t:

Step 7 when the display becomes full breaks in the CLI and displays - MORE-. Press SPACEBAR to continue.

extracting information (229 bytes)

C1310-k9w7-MX.122-15.JA1/ (directory) 0 (bytes)

C1310-k9w7-MX.122-15.JA1/HTML/ (directory) 0 (bytes)

C1310-k9w7-MX.122-15.JA1/HTML/Level1/ (directory) 0 (bytes)

extraction c1310-k9w7-mx.122-15.JA1/html/level1/appsui.js (558 bytes)

-MORE-

If you do not press the SPACEBAR to continue, the process eventually times out and the access point continues to inflate the image.

Step 8, type the command STARTER set to designate the new image that image that the access point uses when it restarts. The access point creates a directory for the image that has the same name as the image, and you must include the directory in the command. Your entry might look like this example:

AP: set initialization flash:/c1310-k9w7-mx.122-15.JA1/c1310-k9w7-mx.122-15.JA1

Step 9, enter the set command to check your boot loader entries.

AP: the value

Boot=Flash:/C1310-k9w7-MX.122-15.JA1/C1310-k9w7-MX.122-15.JA1

DEFAULT_ROUTER = 192.168.133.1

IP_ADDR = 192.168.133.160

SUBNET MASK = 255.255.255.0

Step 10 enter the command start to reset the access point. When the access point reboots, it will load the new image.

AP: start

I hope this helps!

Rob

Tags: Cisco Wireless

Similar Questions

  • 'Restart now' IOS command for 1310 Wireless Bridge

    I have 2 Setup bridges wireless Cisco Aironet 1310, the line-of-sight, 3/4 mile, one as Root as Non-Root.  Sometimes they drop their connection, but a hard reboot, one or two bridges will re-establish the connection.  What is the equivalent IOS command to the

    "GUI > system software > System Configuration > reboot now" command?  I would like to be able to telnet to the units and issue/script, the appropriate command.

    the command is "recharge".

    BRIDGE # reload

    Concerning

    Surendra

  • Links in the Facebook crash and Safari pages keep reloading / crashing even with iOS 9.3.2

    Ive got ios 9.3.2 and links in Facebook keep crashing again. And every time I try to navigate in safari or chrome pages keep reloading. Sometimes only couple of times, but other times it charging until the phone freezes and puts an end to all applications and sent it to me to the home screen. Shurting, sometimes even to the bottom of the Web page. There are some days where was at its worst, but it stopped after the phone automatically just reset (like holding home and power at the same time button). But it doesn't work when I do it myself. At the moment it is slightly backward. Especially with the Facebook links crash. But my safari page was actually not to recharge for some reason any while I was typing this question on my iPhone. It is very annoying because I can't navigate on my phone. Actually, it gets to the point where any other webpage just keep reloading until phone crashes.

    I'm using an iPhone 6 +.

    I do not know how to solve and I thaught it was a 9.3 iOS problem. I use 9.3.2

    It was not a problem in the 9.3, there is a problem with your phone. That's why 9.3.2 has not set. As a first step, remove the Facebook application, reboot your phone in now the HOME and SLEEP buttons simultaneously until the Apple logo appears, and reinstall the FaceBook application by downloading it with the App Store application on the phone.

    For Safari, open Safari, tap the HOME button, wait a second, double - press the HOME button and sliding upward on the Safari screen image. Then go to settings/Safari and tap clear history and data from the Web site. Reboot again.

    If the problem persists after these steps, restore iOS through iTunes and set the phone like New. Do not restore the backup, because the problem is most likely in the data to be backed up.

  • The 1310 AP configuration and IOS

    I have two 1310's

    the info for A is:

    Product/model number: AIR-BR1310G-A-K9-r
    Software system Filename: C1310-k9w7 - tar.124 - 3 g .JA1
    System software version: 12.4(3G) JA1
    The boot loader version: JA4 12.3 (2)

    the infor for B is:

    Product/model number: AIR-BR1310G-A-K9
    Software system Filename: C1310-k9w7 - tar.124 - 3 g .JA1
    System software version: 12.4(3G) JA1
    The boot loader version: JA4 12.3 (2)

    I'm trying to create a bridge root bridge of relationship and I'm out of luck.

    they are on my desk in front of them, I tried different cisco configs and radio, keep going down.

    I tried express setup (where it requires an SSID) and a manual configuration (where the SSID is not required since I DO NOT NEED to a SSID for a simple communication from gateway to gateway).

    ex: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml

    These two will link two buildings and each will have a switch on the other end.

    simple enough no VLAN etc.

    I begin to suspect the IOS versions that I can't find these versions of IOS in all documentation I looked for examples of configuration.

    This AP is very popular for use in severe environments as an AP not a bridge also to some bridges, you can use an omni antenna if the 1310 is the root for a mutiple no roots or the builtin antenna may not meet remotely you need and you can use a Yagi or dish for the link.

    If you use a single antenna, you will have to change it in the config you use right/primary only antenna. If you do not do this, try using the left/secondary antenna AP and the connection will fail because of the lack of an antenna, your other choice is to put an antenna on both connectors and not worry.

    There isn't that one radio, based on the communication software will pass the exit to the righht or left antenna if diversity is enabled

    the builtin antenna is vertically polarized so you shoud in stall the Yagi with vertical polarzation is polarization normal if you follow the antenna installation instructions. There is normally an arrow and the word to indicate the orientation of the antenna.

    Each AP may be at the root, don't forget to ecre evidence all coaxial connections.

    Yes, you learned that the tree covering weight works.

    Good luck

    Bill

  • Home_btn to reload the iOS app does not work?

    Hello again,

    I can't find the solution.

    I hope someone can help me because I'm desperate.

    I have a hand-SFW in several levels - from the SWF file.

    Now, I want to at each level a Home_btn so I can reload the app.

    Here is my code in some SWF level:

    Home_btn.addEventListener (MouseEvent.CLICK, go_home);

    function go_home(event: MouseEvent) {}

    var appDomain_1:ApplicationDomain = new ApplicationDomain (ApplicationDomain.currentDomain);

    var context1:LoaderContext = new LoaderContext (false, appDomain_1);

    var loader1:Loader = new Loader();

    var file1: file = File.applicationDirectory.resolvePath ("main.swf");

    loader1. Load (new URLRequest (file1.url), Contexte1);

    addChild (loader1);

    }

    for the most part. Fund sovereigns the level_SWF won 't open again.

    I have included all sovereign funds in the MainSWF and the main SWF file also.

    I hope someone can help me.

    attach a screenshot of your air for ios settings panel that shows your include files.

  • Why iOS occasionally devices need to reload all of the Photos in iCloud?

    We have about 11 thousand photos, shared (sync) among the six Apple devices: 2 MBPs, two iPads and two iPhones. Occasionally, and in response to any event, I'm not sure, choose one of the iOS devices to transfer all his photos on iCloud before getting back in harmony with everyone. Very frustrating. NB., all devices are scrupulously kept to the most recent version of all software. and of course for this many pix we pay for extra storage iCloud. It could also be noted, devices are put in place to contain full originals, not optimized pix. Is there something I can do to avoid these hassles?

    This can occur when the software is updated.

  • After the update to iOS 10 my phone hangs up on use of contacts, calendar and email, often crashing their and reloading the affected application.

    It seems that when I update my contacts or calendar, or email, or roughly 'something' that requires text input hold out.  It's like hitting very was controlled and matched / duplicated elsewhere.  I would prefer to allow me to do anything about it either, I have do locally and then do everything he does brings my camera stopped.

    Try this and see - restart your iPhone, iPad or iPod touch - Apple Support

  • Now my iOS reload every time flash app

    I'm working on this application test of slide show, slide show that starts by loading an array of photos online, that once loaded becomes a...

    My question is: How can I keep the app in this state when you press the home button on the iPhone?

    As it is now, when I reopen it the app after a trip to the home screen, the application begins to recharge, even if it has been loaded and running in the background.

    (I work in Flash Professional, CS5 btw)

    Check with java-version in the command prompt to see if you have installed? If its installation and adjustment for the access path then it will work. I'm leaving for the day. Please google it configures java in your system if you do not get the version of the cmd prompt.

  • IOS in 10 questions

    Hello

    upgraded my iPhone more than 6 s to IOS 10 first day of its release. but lately I discovered that when I double tap to close an app, the screen brightness will a little dark and less than a second, it goes to the State of origin. is this normal, or is only on my phone only, see the photo below

    Who should not be the case; have you tried to restart the phone?

    That said, there is no point and no advantage to the closing of applications unless they are badly behave. It actually increases exhaust the battery, because the applications that you closed run anyway, and if you remove them they need reload and reset, that takes a lot of energy.

    See: http://9to5mac.com/2016/03/10/should-you-quit-ios-apps-answer/

    and: http://www.howtogeek.com/204552/no-closing-background-apps-on-your-iphone-or-ipa d-custom-make-it-more fast /

  • phone app 10 iOS crashes

    After the update to iOS 10 app phone occasionally hangs. I have to exit and reload. Does anyone else know this?

    Try to keep these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

    If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

    https://support.Apple.com/en-us/HT201252

  • Bitmoji keyboard stopped working after update iOS 10?

    My bitmoji keyboard no longer works on my iPhone 6 since I have updated to iOS 10 today.  The emoji keyboard keyboard English (United States) both still work, but when I try to go to Bitmoji, it shows a black background that says: "Please enable full access. We need full access to retrieve your avatar... »

    I went into my settings and checked under "Keyboard" and switch "Allow full access" is enabled for the Bitmoji keyboard.

    I tried to restart my phone, deleting and reloading of the application and is gone in the settings and made sure that the "Full Access" switch was once again, however when I open messages and try and switch to the keyboard, I get the same black screen and note.

    Does anyone have any other ideas, or is having the same problem?

    I'm not familiar with this keyboard, however, will need a lot of app developers and content and still haven't, update their software to be fully compatible with the last software update (iOS 10).

  • Unable to get the iPhone to iOS 10 6

    I'm looking to get my iPhone to iOS 10.0.1 6. Whenever I try to update, I get the following error message: "upgrade to iOS 10.0.1 requires at least 610 MB of free space on your iPhone." Please change your synchronization of media options to make more available storage. ». I have many photos and almost no music on my phone. Indeed, iTunes says I have 2.73 GB free on my phone. I had a similar problem when I was updating my phone to 9.35, when iTunes said I had 1 GB free, but Setup disagreed. I could only update after removing all my music from my phone. Someone else has this problem? I have to delete all my apps before updating my phone?

    I would go to the general > storage & usage > Storage manage and delete some of your larger applications. Then reload them after the update.

  • How to upgrade to iOS 10 as 'clean' as possible without losing the data in the App

    Hey guys,.

    iOS 10 is around the corner and, therefore, I wonder now how I can improve my iDevices (5s, 6, Air 1, mini 2) as clean as possible, i.e., ideally without the remains of previous versions of iOS, while keeping all these backups of Angry Birds and iMessages. This used to be no problem because I would just do a restore DFU, "Set up as new iPhone", install all the applications manually and restore the backups and iMessages by iExplorer. Then Apple removed the app data access in iOS 8.3 and above, who killed this option

    Since iOS 8.3 I have upgraded to major releases by removing your existing backup and creating backups completely new immediately before executing a DFU restore to the new version, and then reloading your backup come on my device.

    However, I am sure that this leaves still unwanted remnants of installed earlier, I really want to get rid of (so my devices also perform smooth and free of bugs as possible, with as much free space as possible). One of my ideas to get there is to delete all applications without data important app and 'Reset settings' before creating a fresh backup, do a DFU restore, restore the backup and finally reinstall and reconfigure the previously deleted applications.

    Does make sense? That guys would you recommend?

    See you soon,.

    Daniel

    Please read iOS 10 - official Apple Support.

    However, I am sure that this leaves still unwanted remnants of installed earlier.

    Is not, is there a need or benefit to the removal of the existing iCloud backups.

    You're overthinking not too much of the case. There are only two basic steps: backup and update. If you have an Apple Watch, follow the third stage also: update your Apple Watch. That's all there is to it.

  • If I try to open and read an article by e-mail, after a minute or two it loads and reloads and recharge and charges making it impossible article reading. It is been going on for a while but now its impossible to read an article.

    My version of MD531LL/A model ipad. 9.3.4. when I open and read an article by e-mail, after a minute or less, it loads and reloads and recharge and refill, making reading impossible article. Or, if by chance I am able to read the article, then click on another link, I start to read the article and then it will reload to the original article, I started with that. It is been going on for a very long then that although now it is almost impossible to read an article. I searched this issue on the web and can't find something that fits for this problem. Deletion of my browser history & power on and power off does not help. Any help would be greatly appreciated. Thank you!

    Hello. You use the Mail of iOS app, or you use webmail in Safari or Chrome?

  • Lost playlists when reloaded windows

    Recently, need to reboot my PC. Put iTunes backup suite and reloaded data including my music. All my music is still there, but no playlists. I have an iPad and an iPhone5. Synchronize my iPad and now lost my playlists from that too. iPhone is the only place where my playlists still exist. I can't off my iPhone playlists and iTunes on my PC?

    See recover your iTunes from your iPod or an iOS device.

    TT2

Maybe you are looking for

  • Visual Studio error after installation of the CVI

    Ladies and gentlemen, After the installation of CVI (current version), I've got strange message in Microsoft Visual Studio 2005 (appeared every time when I build the solution, for example, by pressing Ctrl + Shift + B): I have no integration with CVI

  • New computer falls a few minutes after connecting to the Internet.

    When I firstl newspaper in my internet computer will work fine, but after a few minutes, I get the dns server does not. How can I fix? My computer is new, I have troubleshooted my internet connection and all right? original title: WHY do I GET the SE

  • Message 'Javascript' blocks the cell access to Hotmail.

    My cell phone is an enV2 (Verizon) LG, and during the last 2 days, this message began to appear from time to time when I try to log in; Today, I can not connect at all because of this: "Windows Live ID requires Javascript to sign in.  This web browse

  • UNKNOWN ERROR HAS OCCURRED, THE PROTOCOL POP3, SECURE (SSC) NO. 0X800C0133 ERROR NUMBER PORT110

    I HAVE DEFRAGED AND COMPACT OUTLOOK EXPRESS FILES ACCORDING TO THE RECOMMENDED SITE MS. HELP I ALWAYS GET THIS ERROR MESSAGE WHEN I TRY TO DOWNLOAD MY MAIL. HE RECEIVES ON MY BLACKBERRY BUT NOT ON PC. CAN SOMEONE HELP ME?

  • ACS1113 services of gradient.

    Hi all A unit of ACS1113 is having their degrading services on normal production hours. I checked the memory usage and I think that its too big... the total physical memory is 84 MB, this could be rated as a memory leak bug? or the use of the high me