relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

Similar Questions

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• Satellite A60-181 heat up and turns off.

  Hope someone out there can help you.
  I was not able to use my A60-181 for awhile without being constantly plugged to electricity.
  And it seems to warm up and turns off.

  I bought a new battery, but I still get the same problem... and it is only 2 years old!
  Someone has an idea of what I need to do?

  In my view, this case is clear. It s a simple overheating. Usually the laptop stops automatically to prevent laptop damage material. Usually, this occurs if the laptop fans twist with speed and maximum performance.

  The reason for this behavior could be a dust and debris inside the laptop. Especially after 2 years of work and aspiration, the dust has a bad influence on the rotation of the fan.

  The module of cooling for computer laptop cleaning could help!
  But if you have no experience of it please contact the technician. It is recommended to clean the fans professionally.

• Equium A60: After BIOS update device will beep several times and turns off

  Hello

  I downloaded the windows BIOS update for my Equium A60 (dated 11/15/05) and ran the executable by following the instructions, after ensuring that the current AC has been connected, etc.. The update has got a little more to halfway when the computer turns off suddenly.

  Now when I try to turn back on it just a few beeps and turns off again. It seems to me that the BIOS is screwed. Is there anything I can do to get my machine to run?

  Thank you
  Phil

  Hi Phil,

  Unfortunately, it seems that if the BIOS of your laptop is corrupted. Unfortunately, he didn't there has no easy way for you to correct yourself and you will need to take the phone to your nearest Toshiba Service agent who has the necessary specialized equipment to reflash your CMOS with a new BIOS chip.

  Kind regards

• Screensaver Windows 7 Pro x 64 and turn off monitor do not work

  On a new install of Windows 7 Pro x 64 (detail), the screen saver and turn off the monitor features do not work.

  I put the simpler (in white) screensaver at 1 minute and turn off the screen in 2 minutes, but are never triggered.

  I don't have a wireless mouse, as I read that may cause problems. All Windows updates have been applied.

  Please notify.

  Try to reinstall/update the chipset drivers and associated power, of your motherboard to the support site, maybe also an update of the Bios and

• Qosmio F20-154: BSOD and turns off

  Qosmio F20-154 goes to blue screen and turns off if the cd is inserted or if the flash drive is inserted
  Also hotkey error on turn on the computer

  Hello

  This means that you can not read data CD or USB key?
  Is this correct?

  Have you tried to boot from the CD or DVD?
  Have you tried to reinstall the OS?

• Satellite P300 - 20 H refresh the screen every 10 minutes and turn off during 3 sec

  Hey,.

  Basically, I bought my P300 Sat about a month previously and each time it runs, battery, the same error will occur...
  It will update the screen every 10 minutes or more and turn off for 2-3 seconds.

  This isn't a big problem, but it is annoying that I can not sort.
  I tried to run a check of problem to find a solution, but he says that he can not find a.

  Help, please
  Thank you.

  Hello!

  Can you please explain what you mean with refresh? And what exactly is happening?

  It is not easy to say what the reason is for this, but have tested an external monitor on the laptop? And you can determine if it s a problem with the internal display or not.

  In addition, you must make sure that you have installed the latest display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you installed a display driver Toshiba not you should remove it. These display drivers can often cause problems and don t have protection against overheating.

  Good bye

• I used the backup and restore of the backup C on pc. Then tried to open saved files with IE and started acting weird.

  zip files

  I used the backup and restore of the backup C on pc.  Then tried to open the files saved with IE.  IE went into free fall.  ???

  I have no idea what opened the backup files when you have double-clicked, or if you will not quote you took after doing this...  However, the official way to 'Browse' the content of the backup...

  You can view the contents of your backup by opening the wizard to restore files.

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. Do one of the following:

     • To view your files, click Restore my files.

     • To display files all the, click on restore files for all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Do one of the following:

     • To browse the contents of the backup, click Browse for files or click Browse for folders.

       When you browse folders, you will not be able to see the files in a folder. To view individual files, use her browse for files option.

     • To search the contents of the backup, click search, type all or part of a file name, and then click search.

  If you back up to the top PC (VHD) integer then you mifght consider this trick:
  http://www.Petri.co.il/mounting-Vista-backups-using-Windows-complete-PC-Backup.htm

  According to the edition of Windows Vista that you have (and how useful, you will find the possibility to look at old versions of a given file and possibly restore), this could be useful to you:
  http://www.ShadowExplorer.com/
  (not a replacement of relief.)

  With regard to the rate of success vs. failure rate of backup - it is difficult to measure.  Indeed most of the people backs up incorrectly.  It's really * not * enough to set a backup and forget about it.  If you test ever that your backups work/glance to see if you are backing up the good thing - it's just not wise.  Although most people expect that it is essential that the backups were working properly (not a test, a real emergency) to be discovered.  Most individuals who report failures, unfortunately, fall into this category "when my aircraft crashed and I went to my backups - it turns out _ backup _ does not and never told me...» ».

  A question... If you manually create a ZIP file (not a backup) - can you still Explorer in it as a folder?

  To test... Create a folder on your desktop.  Copy some files into it - of different types.  I say COPY and not MOVE on the goal here - because you can just blow this folder and all that results from this folder later if it was all fair copies of things.

  Make a right click on this folder and choose "send to" and "compress (ZIP) file and give a name to the new 'folder '.  (It's really a file.)  On your desktop, you should have the original folder you created and copied some stuff in, and a new "folder" with the name you just gave.  If you open the 'new' folder - you should see the name of the folder that is still on the desktop and go to this folder, you should see the files.  You literally use Windows Vista to the 'discovery' inside a ZIP file as if it were a folder.

• Why the screen of windows 8 turn on and turn off.

  Why the screen of windows 8 turn on and turn off.

  Hi Richard,

  Thanks for the update.

  Have you checked for loose connections power cable?

  I ask you to contact HP support, as this seems to be a hardware problem.

  If you have questions about Windows operating systems, help us on this forum.

• Satellite A135-S4666 - cooling fan turns on and turns off every 20 seconds

  Hello

  I'm from the Argentina... I just bought a new Satellite A135-S4666 and I noticed that the cooling fan turns on and turns off every 20 seconds.
  It is a little annoying and it disctracts me of what I'm doing... is there a solution?

  Thank you very much.

  Hi Martin,

  This behavior is perfectly normal and nothing to worry about. If you find the noise irritating cooling fans you are likely to change their behavior by using the utility of Toshiba power where you should be able to set the cooling mode to run more quietly. I think trhe default is to allow the CPU to run at full speed, which will, of course, the fans turn every few seconds, but by reducing the speed of the CPU, the heat produced will be lower and therefore the fans will run less often.

  Kind regards

• Why windows constantly error reports and turn off

  Why windows constantly error reports and turn off. It is THE most reliable service.

  * original title - sucks of windows *.

  Hello williamiscome,

  This error message do you receive?

  The computer shuts down or restarts it?

  Let know us and we will continue to help you.

  Best regards

  Matthew_Ha

• Is it possible to set up a computer to turn on and turn off itself every day or on any selected date?

  Is it possible to set up a computer to turn on and turn off itself every day or on any selected date?

  Mine is a HP G72-b27CL running Windows 7 64 bit laptop.

  Yes can schedule a task to start the system using the option shown in the screenshot below:

  

  You can schedule a task to turn the system off by as shown in the link below:

  http://www.thespinningdonut.com/how-to-automatically-shut-down-your-Windows-7-computer/

• Bluetooth Smartphones blackBerry turns on and turns off without warning

  Without apparent reason, Bold 9700 connection Bluetooth headest will falter. Audio turns on and off quickly. On the phone, I see the bluetooth symbol turn on and turn off and the indicator of volume contracts and expands. Voice communication is impossible. It is charging and battery-pull not fix issue. This problem occurs even when I turned off the bluetooth connection.

  Thank you for your reply and suggestion. Is going to the tech Department ATT, they replaced the SIM card [said he was old], and the problem seems to be resolved.

• My power is out and turned off my pc. Now it says my windows in invalid.

  My power is out and turned off my pc. Now it says my windows in invalid.

  Try to do a restore of the system before it began:

  How to make a system of Restore in Windows 7 or Windows Vista ...