Remote Access Auto Connection Manager and error with a VPN work

I use my laptop to connect to my VPN working. It has not worked since June 24, 2010. I get a message indicating that the connection to network access device is not found. I also have a problem with the connection manager automatic remote access. I'm trying to launch and get an error code 5, unauthorized. The Auto Connection Manager remote access has something to do with the vpn access problem and if so how can I solve this problem?

Hello hitherandthee,

Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Following your question thanks for posting the link below:

http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads?page=10

Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Can not get to start remote access connection manager and the connections don't work Internet

    Original title: wired & wireless connections does not.

    I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

    I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

    Hi Rick,

    1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

    2. you receive error codes or restore messages when you perform the system?

    You can check the status of the following services and make sure that the services are started.

    a. Click Start and type Services in start search and press ENTER.

    b. in the services with the right button on the phone and then click Properties.

    c. under the general tab, select automatic next to startup type.

    d. under the general tab, click Start under the service status and then click apply and then click OK.

    e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

    Hope this information is useful.

  • Unable to connect to HP Connection Manager. Error 8008005

    I have a HP Pavilion dv6 Notebook PC and get an error "could not connect to HP Connection Manager. Error 80080005 "I tried in vain to resolve through messages. Any ideas?

    I just bought a HP dv7t Quad laptop and have the same problem.

  • Configuration guide for ESXi 5 (Vmnetwork, management and vMotion) with NIC 2 network

    Hello

    I have 4 NIC in Server Blade 7 (ESXI 5), would like to dedecate 2 NIC for (Vmnetwork, management and vMotion) & NIC (iSCSI traffic) 2 with equallogic SAN.

    I equallogic guide to configure ESXI with it, but how do I configure (Vmnetwork, management and vMotion) with NIC 2, my priority is excellent speed for my virtual machine, and then nothing else.

    Then just go for classic switch.

    The configuration is a lot depend on existing infra, the trunk, the physical switch for redundant network & balance, 100 or network 1GbE, no.. virtual machines and etc. If there is a new configuration, I suggest you trunk 2 x available vmnic (the vm network) to balance the load and better performance.

  • Understanding "CONNECT BY" and "START WITH".

    OK, I'm trying to update the rows with values determined by lines joined in a recursive relationship of unknown depth. I am told that "CONNECT BY" and "START WITH" can be useful in this, but I don't see how to get the value I'm looking for.

    In my case, there are 3 values in my table.
    ID
    ID of the parent
    Invoice

    On some lines, the Bill is null. For records, you get the ID of the invoice by searching for the invoice of the parent folder. I'm trying to update the table so that all THE rows in the table have an ID of invoice.

    Here is an example of table and the lines.
    CREATE TABLE DISTRIBUTION (
ID            INT,
INV_NUM       INT,
PARENT_ID     INT
)

INSERT INTO DISTRIBUTION 1, 111, NULL;
INSERT INTO DISTRIBUTION 2, 112, NULL;
INSERT INTO DISTRIBUTION 3, NULL, 2;
INSERT INTO DISTRIBUTION 4, 113, NULL;
INSERT INTO DISTRIBUTION 5, NULL, 4;
INSERT INTO DISTRIBUTION 6, NULL, 5;
INSERT INTO DISTRIBUTION 7, NULL, 6;
    What I would do is update the inv_num column in the table so that a select statement * would look like this...
    ID        INV_NUM    PARENT_ID
-----     -------------     ---------------
1            111           null
2            112           null
3            112              2
4            113           null
5            113              4
6            113              5
7            113              6
    You can provide any help would be greatly appreciated.

    Hello

    Thank you post the CREATE TABLE and INSERT instructions, but please make sure that they work.
    None of the INSERT statements; I think you meant something like the statements shown after the query.

    Here's a way to get the desired results:

    UPDATE  distribution     m
SET     inv_num = ( SELECT  inv_num
              FROM    distribution
              WHERE   CONNECT_BY_ISLEAF     = 1
              START WITH     id          = m.id
              CONNECT BY     id          = PRIOR parent_id
                       AND     PRIOR inv_num     IS NULL
               )
WHERE   inv_num       IS NULL
;

    This statement is Bottom-Up of subqueries, where we START WITH the lines that need to update, and process to the top of the tree, until you get to an ancestor who was an inv_num.
    In your sample data, only the roots (the lines that have no parents) have inv_num. In this case, it might be a little easier (but only a little) to make a request from top to bottom , where we START WITH the roots and low process in the tree to find their subordinates.
    If we add some data examples where a nonroot has inv_num:

    INSERT INTO DISTRIBUTION (id, inv_num, parent_id) VALUES ( 91, 910,   1);
INSERT INTO DISTRIBUTION (id, inv_num, parent_id) VALUES ( 92, NULL, 91);

    What results would you like?
    Using the UPDATE statement above, id = 92 would get his inv_nuym of the closest ancestor (in the case of thios, parent) who had an inv_num:

    .       ID    INV_NUM  PARENT_ID
---------- ---------- ----------
         1        111
        91        910          1
        92        910         91
         2        112
         3        112          2
         4        113
         5        113          4
         6        113          5
         7        113          6

    Either the row with id = 92 gets inv_num = 910, no 111.

  • Remote access Windows Server 2012 through internet with desktop connection

    Summer messing about with it for days and don't get no love.

    Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

    Tried all these steps found in this promising and useful article:

    http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

    1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

    2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

    3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

    4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

    5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

    6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

    But the result of the message is always the typical:

    (1) remote access to the server is not enabled.

    > But this is not true, that I am capable of the DRC at home on the server machine.

    (2) computer remote is not off.

    > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

    (3) the remote computer is not available on the network.

    > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

    So... what to do, what to do...

    The wifi booster is a problem?

    Connects to the Data Center edition a problem?

    What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

    Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

    Thanks for any input.

    / Markus

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

    Hey there,

    I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

    "HPConnectionManager.exe - fatal error '.

    HP Connection Manager service has stopped responding. Quit and restart the application.

    A fatal error occurred, check the HP connection manager in the event viewer for more details.

    Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

    I tried the following on one of these books:

    -Start the service manually: "Error 1067: the process terminated unexpectedly."

    -Msconfig: Removed any connection associated with Autostart Manager

    -Reinstall the HP connection manager

    -Repair HP Connection Manager

    -Reinstall .NET 3.5

    -Changed some regkeys

    -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

    More information:

    -(pour la plupart) HP Probook 6550 b

    -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

    -HP 4.1.22.1 Connection Manager

    The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

    I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

    Thanks in advance!

    You could try this on one machine that shows the issue and see if it helps:

    Relevant information:

    V4.4.10.1 Connection Manager

    Corrections in sp58930:
    -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
    -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
    -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
    -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
    -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
    -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
    -Fixes an intermittent issue where network technology is incorrectly identified.
    -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
    -Fixes an issue with the Spanish version.

    Prerequisites:
    • HP or Compaq machines only brand
    • Operating system is Windows XP or later
    • If the operating system is Windows XP, it must have installed SP3
    • Version of the .net framework 3.5 SP1 must be installed

    Improvements:
    -Supervises HP Support version 4.6.8.1

    Installation package:

    sp58930 Connection Manager V4.4.10.1

    =====================================================================================

    Hope that helps...

  • Auto Snapshot Manager. Error. Click for more details

    Hi all.

    • Trying to install the Dell EqualLogic Auto Snapshot Manager on a virtual machine and connect to VCenter.

    • When the installer has finished, I go to the console using the IE shortcut created by the installer on the desktop.

    • The login page is displayed for the user name and password for the VCenter

    • The attempts of the page to load, but generates a message at the top left corner " error.» "For more information click "

    I've tried so far:

    • simple uninstall and re-install

    • installation on a physical rather than virtual computer

    • installation on the Virtual Center (don't try this - it completely screwed my vCenter and inturrupted IIS)

    Ideas?

    It also works for me now. Thank you

    André

  • Management of errors with the return code

    Hello

    I set up an email notification which is the last step in case of failure and success. As I am manages all stages with a link (red arrow) KO, ODI handles any error that occurs and so there is never a return code different from 0 (success). It's great because the administrator receives an email with detailed error information, but the process is performed by an external Scheduler and IT operations wants the Scheduler must be notified by the return code if an error occurs.

    How can I do both: manage a mistake and will continue to receive a return code other than 0 on the command line?

    Thank you
    Matt

    In your package.

    For the final step before sending the mail.

    Create 2 steps (which will be the same), with both the same send email step.

    Put the green arrow of your last treatment for the first shipment of e-mail, it will be your end if no error.

    Put the red arrow of your last treatment for the second e-mail was sent, it will be your end if there is an error.
    After the mail error put another step which end in error every time, as a procedure that calls a ' select * of fgfhfju "(if you don't have a table of fgfhfju) and bind this step with a green arrow at the stage of email from error.

    You can now separate finishing way in your package, one for the error and another for the right side.

    Hoping to help.

    Kind regards

    Brice

  • Unable to access the Task Manager and no. icons work

    My computer can not access any programs like when I click on them, they don't open.

    Then I tried Ctrl-alt-del and it took some time. The screen became black and said failure to display the closing and security options.
    Please help I run on windows 7
    And also is it a virus or not?

    See if you have the same problem, if you create another user of Windows and test with it.

    You can also try the system restore since you seem to eliminated all Virus problem.

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
    http://support.Microsoft.com/kb/936212/#appliesTo

  • Why can't download sp1 it stops me to ie 9 and acssesing my hotmail - Service Pack 1 installation gets 21% and errors with 08007000

    try to download sp1 gets to 21% and errors 08007000 I think that prevents me from download ie9 now slaughter my hotmail error is ie cant acsses web page please can I get help

    Hello

    ·         What happens when you sign in to Hotmail in IE?

    I suggest you follow the steps described in the article below and check if the problem persists:

    http://support.Microsoft.com/kb/947366

    Also, follow the steps in the link below to install Service pack 1:

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

    Due to Internet Explorer, follow the steps described in the article below:

    http://support.Microsoft.com/kb/956196

    http://support.Microsoft.com/kb/967897

  • Comments Win XP cannot connect to the network when Cisco VPN works on Mac

    Guest OS (Win XP) on the merger connects to the network, no problem. However, when I start a Cisco VPN on my Mac (not in the guest operating system) and then start Fusion/guest OS, the guest cannot connect to the network.

    I was able to use this configuration for a year on an old MacBook Pro (unibody). Last month, I got a new MacBook Pro and flying over my virtual machine image. I don't check for a few weeks. I'm sure I fly over the image correctly because everything else seems OK or if the IT guys doing something to block my traffic over the VPN.

    Config

    -Fusion - Version 3.1.0 (261 058)

    -Mac - 10.6.4

    So far, I have tried the following

    -started to merge and XP without VPN on Mac - OK (bridge autodetect)

    -launched VPN to work, and then launched Fusion - no network

    -tried ipconfig/release, ipconfig / renew - not always no network

    -tried NAT - do always no network

    Thanks in advance. For any help or suggestion will be greatly appreciated.

    Bernie

    The NAT value and then restart the virtual machine.  Works for me with the VPN client built into a cisco router.

    Do not work the real on 10.6.4 cisco software unless you really need to.

  • Error 16 and adobe application manager and problem with uninstalling

    Hello

    Big problem with ligthroom CC,

    Initially, I got the error 16, I changed the name of some files the other instructions.

    Now, Lightroom still doesn't work and ask me for the "Adobe Application Manager, which is absent or"injured", to run the trial version. But I no longer use the version been trying for over 2 months!

    I tried to uninstall Lightroom and it does not work, adobe talk a uninstall problem. I tried everything it was written and still does not work

    Please, help me!

    under PC

    Thank you

    Error 16: Creative Suite help / Error Configuration 16 | CC, CS: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  • Temporary internet connection interruption and error msg

    I am trying to download some PDF forms from a Web site, and whenever I click on the appropriate button to open the form page, the current page

    Gets closed their doors and the internet connection gets temporarily broken causing me to have to re - open up a new window.

    I have this experience also with trying to access government sites as well, but only occasionally, not all the time.

    My question is this:

    Do I have to download some sort of update to the software to allow me to download the necessary forms.

    And if so, which? and can you please provide me the link?

    Thank you.

    Hello
    Please follow the instructions below:

    When you install Acrobat or Adobe Reader on a system that includes a browser, you automatically configure the browser to open PDF files in the browser window. Acrobat and Adobe Reader install the ActiveX plugin files allow you to use Internet Explorer or AOL to open PDF files. If an application is installed, but do not open the PDF files in the browser window, then work through the following steps to configure the browser:

    Acrobat may not work correctly if the system does not meet the following requirements:

    • Intel Pentium III processor or equivalent
    • Microsoft Windows 2000 with Service Pack 4, Windows XP Professional, home edition or Edition Tablet PC with Service Pack 2
    • Microsoft Internet Explorer 6.0
    • 256 MB RAM (512 MB recommended)
    • 860 MB of available disk space; cache for optional installation files (recommended) requires 460 MB of additional free disk space.
    • screen resolution 1 024 x 768

    To open PDF files in a browser window, the ActiveX folder should contain the following files: AcroPDF.dll, AcroIEHelper.dll and pdfshell.dll.

    ActiveX controls must be in: program files Files\Adobe\Acrobat\ActiveX

    If one of these files is missing, then repair Acrobat or Adobe Reader by choosing Help > repair Acrobat Installation or reinstall the application.

    Make sure that you use a version of your web browser, Acrobat and Adobe Reader supports, such as Internet Explorer 6. Supported for Adobe Acrobat 8, Adobe Reader 8 browsers are Internet Explorer 6.0, 6.0 SP1, Internet Explorer 7.0, Firefox 1.5 or later, Mozilla 1.7 and AOL 9.

    To make sure that the Windows registry provides the information that your web browser should display PDF files, restart Windows. If the Windows registry is not updated after the installation of Acrobat, then the web browser can not find the references it needs to access the PDF files on the web.

    If you have an older version of Acrobat or Adobe Reader is installed on the system, and then use the Add / Remove programs in Windows to remove it.

    If you use Acrobat, and then repair or replace the damaged or missing files by using the repair feature the Installation of Acrobat or the dialog box add or remove programs.

    To repair Acrobat:

    1. Choose Start > Control Panel.
    2. Double-click Add or remove programs.
    3. Select Acrobat and then click on edit.
    4. Follow the on-screen instructions to repair the Acrobat.

    7 reinstall Acrobat or Adobe Reader.

    To ensure that the correct information of the plug-in is added to the Windows registry, reinstall Acrobat or Adobe Reader.

    If you want the browser to open PDFs in a separate Acrobat window, then configure the browser to use Acrobat or Adobe Reader as a helper application. Then, when you select a PDF file in Internet Explorer or AOL, the browser opens the PDF file in an Acrobat window instead of the browser window.

    To configure the browser to use Acrobat or Adobe Reader to open PDF files:

    1. Close your web browser.
    2. Start Acrobat or Adobe Reader.
    3. Choose Edition > Preferences.
    4. Select Internet from the list on the left.
    5. Deselect Display PDF in browser, and then click OK.
    6. Restart Internet Explorer or AOL.

    Note: The next time you select a link to a file PDF, the browser may ask you to open or save the file. If you choose to open the file, then the browser opens the file in the support application that you specified. If you choose to save the file, the browser downloads the file to the hard drive.

  • Hierarchical connect by and start with and joined?

    I have an Employees table and a table of identifiers. The table of identifiers is hierarchical, with parents and children. Each employee has one or more identifiers, but that a unique identifier is considered to be the "primary" or root for each employee identifier. Unfortunately, the employee table can point to one of the children identifier lines and not the root. I need a quick query to reach employees with their most recent ID (root).

    Here's the code to define the problem.
    create table employees (employeeid varchar2(8), fakeNationalID varchar2(9), empname varchar2(30));
insert into employees (employeeid, fakeNationalID, empname) values (1,'001000001','John Smith');
insert into employees (employeeid, fakeNationalID, empname) values (2,'002000002','James Jones');

create table realids (realidkey NUMBER, fakeNationalID VARCHAR2(9) not null, 
   realNationalID VARCHAR2(9) UNIQUE, parent_realidkey number);
insert into realids (realidkey, fakeNationalID, realNationalID, parent_realidkey) values
   (1,'001000001','111111111',3);
insert into realids (realidkey, fakeNationalID, realNationalID, parent_realidkey) values
   (2,'002000002','222222222',null);
insert into realids (realidkey, fakeNationalID, realNationalID, parent_realidkey) values
   (3,'003000003','333333333',null);
commit;   

create or replace function get_parentid (fakeID in VARCHAR2) return varchar2 is
   tempid VARCHAR2(9);
   begin
      select realNationalID into tempid 
         from (
           select realNationalID, fakeNationalID
              from realids
              start with fakeNationalID = fakeID
              connect by nocycle prior parent_realidkey = realidkey
              order by level desc)
              where rownum = 1;
      return tempid;
      exception 
         when NO_DATA_FOUND then
            return NULL;
         when others then raise;
    end;

    
select get_parentid('001000001') from dual; -- returns 333333333 because its linked to a parent
select get_parentid('002000002') from dual; -- returns 222222222 because there is only one child
select get_parentid('003000003') from dual; -- returns 333333333 because it is the parent
    What I want is to put the parent node above realids for each line of employees...

    It works, but it is NOT very effective:
    select employeeid, get_parentid(fakeNationalID) realid, empname from employees;
employeeid   realid       empname
----------   -----------  ------------
1            333333333     John Smith
2            222222222     James Jones
    You can imagine what it would be like with 100K lines or more. It takes about 3 minutes to run.

    It seemed like a good way to do it, but with a sub query.
    select e.employeeid, e.fakenationalid, e.empname, sub.realnationalid
   from employees, 
      (select realidkey, fakenationalid, realnationalid, parent_realidkey
         from realids r
         start with r.fakenationalid = e.fakenationalid
         connect by prior r.parent_realidkey = r.realidkey) sub
    Unfortunately, it produces an invalid identifier on e.fakenationalid (in the beginning with the clause).

    Anyone has any ideas on how to get top most parent node of the realids for each row in the employees table? In real life, there are 6 or more employees tables across multiple remote instances of what children in the realids table and how much to the parents. We always want the highest parent of the page realid. Any help would be appreciated.

    Hello

    Thanks for posting the sample data in a convenient form!
    It is always useful to post your version of Oracle, too, especially when it comes with CONNECT BY queries.

    What follows is what you asked for in Oracle 10:

    WITH     got_roots   AS
(
     SELECT     CONNECT_BY_ROOT     fakenationalid     AS leaf_id
     ,     realnationalid
     FROM     realids
     WHERE     CONNECT_BY_ISLEAF     = 1
     START WITH      fakenationalid IN ( SELECT  fakenationalid
                                          FROM    employees
                           )
     CONNECT BY     realidKEY     = PRIOR parent_realidkey
)
SELECT     e.employeeid
,     r.realnationalid
,     e.empname
FROM     employees     e
JOIN     got_roots     r     ON     r.leaf_id     = e.fakenationalid
;

    In any query, call a function defined by the user for each line is going to be slow. Fortunately, Oracle now has the built-in functions and operators that can take the place of get_parentid. The CONNECT_BY_ROOT operator, which was introduced in Oracle 10, is the key to the problem. In Oracle 9, you can get the same results using SYS_CONNECT_BY_PATH.

    It is generally faster to CONNECT BY query separately, and then join some other tables you need for results.

    You had a good idea in your last query. The problem was that void and employees were equal tables in the FROM clause, and you cannot establish a correlation between equals. You can only correlate a subquery to its Super application. You could make to this general idea work by changing void in a scalar sub-requete, which can be connected to the employees, but I think it would be much less effective than what I posted above.

Maybe you are looking for