remote access connection - save the server password

Similar Questions

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• After the remote access connection, network printers disconnected

  I hope someone can help me here.

  In Windows Vista, whenever I would give the remote access connection to my PC at home, my default printer (which was be a shared printer on the network out of my server) will prepare its default value.  It was boring but easily fixible.

  I've since upgraded to Windows 7 Ultimate and I'm having a related problem.  Now every time I connect remotely to my home PC, my default printer (same network shared printer - HP LJ 4000) disconnects, and it only comes back online after a reboot.

  It is a point of pain is huge for me because I usually 20 + / applications windows running at a given time and a restart takes 30 minutes out of my day to get back to where I was.

  Any help would be appreciated. Jeff Balcerzak

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/Windows-7-C7200-C7280-offline/m-p/167672

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/0cfa31d7-B44B-4241-aa31-d0ae9f0a2112

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00843712&tmp_track_link=ot_faqs/top_issues/en_US/c00843712/loc:8 & lc = en & dlc = en & cc = us & product = 1153481 & lang = en

• BlackBerry Smartphones is no longer receive e-mail... impossible to connect to the server to update my password

  I have a Curve 8520.

  Carrier Movistar

  I received an email telling me that I had to update my password of my email that I was no receiving email any longer... I can't connect to the server to do this...

  Please help I need it for work

  Hello EmmaG3845

  Welcome to the Forums of the BlackBerry Support

  Leave a PC browser trying to access the e-mail account if necessary change your password for this e-mail account, restart your device, and then try to update this e-mail account on your device.

• Unable to connect to the server vCenter because the user name or password not valid

  Hello

  I have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).

  I have checked all the instructions below and still failed to add virtual machines

  If you are unable to connect to vCenter Server:

  1. Confirm that a network port exists and is available. For more information, see increase the number of ports assigned to a virtual switch for VMware View (1026014).
     
     
  2. Confirm services VMware View manager are running. For more information, see check which required VMware View Manager services are running (1026136).
     
     
  3. Confirm that the network is correctly configured for use in a VMware View environment. For more information, see in the VMware View virtual desktop network configuration (1026498).
     
     
  4. Confirm that name resolution is functioning properly in your environment. For more information, see audit for VMware View DNS settings (1026017).
     
     
  5. Check that the permissions/credentials are correct for the user of the vCenter server. For more information, see confirm/credentials permissions are correct for user vCenter/vCenter server (1028705).
     
     
  6. Confirm that outcomes of the interaction of third parties do not exist with the operating system. For more information, see the confirmation that there are no questions of third-party interaction with the OS in a VMware View environment (1027466).
     
     The virtual machine, I have already assigned to this pool, I can access. I can access by using the client view and also from the console.
     

  Has anyone else seen elsewhere?

  See you soon

  You have the same problem with other pools?   Have you returned through configuration under the Configuration/servers view vCenter configuration?

• I'm unable to access my hotmail account, a pop up comes up and says connection to the server was reset while the page is loading?

  I know that it is a problem of microsoft as my computer has been checked by a technician and he said it was a microsoft problem!
  Other messages:

  connection to the server was reset while the page was loading, is the answer in the pop-up window when I try to access my hotmail account, I certainly know it's a problem of microsoft as my computer has been checked by a technician and that s what he says, sincerely j roth

  THEN A POP UP SCREEN COMES up on TOP of SCREEN AND SAYS CONNECTION has BEEN RESET, the CONNECTION TO THE SERVER WAS RESET WHILE THE PAGE WAS LOADING.this proved to be a problem in microsoft and certainly isn't my computer, so I need it works again!

  Hi JeannieRoth,

  Thanks for posting your question in the Microsoft answers Forum. For any questions about Hotmail, please visit the Forum of Hotmail.

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• Cannot access shared files whne connected to the server

  Original title: dfs namespace access

  We have customers from windows 7 on windows 2008r2 domain. We have a couple of file hosting a dfs servers space names with file shares.

  This server hosts a common \\namespace\fileshare that is still available however 2 other \\namespace\share1 & 2 return cannot access this share when you are not connected to the server. This does not affect any clients, but affects enough that it becomes big problem being the only customer resolution of reconstruction. I tried adding and removing updates. I am at a loss what to try next.

  Any suggestion would be great.

  Thanks Mick

  I found the solution myself after a lot of googling and journal of trace events.

  After you configure wsus, it appeared that our Windows 7 clients suddenly received file sync (small green icon in the taskbar) couple this with an intermittent slow wan link. The fix was all right before you disable offline files. We never wanted their first place very frustrating, but we're still learning.

  It doesn't seem to affect all clients which is what got us thrown away but hey its works now.

  Thanks Mick

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Error installing Adobe Creative cloud due to cannot connect to the server. No firewall, no restrictions access app without anti virus blocking & Port is clear.

  Hi, I encountered error to download cloud creative adobe. For your information, I do firewall, port and access app like the app if you need level. But I am still experiencing installation error (Trying to connect to the server).

  I also downloaded the latest version of the cloud creative and reinstalled (I erased all the previous installed version of creative cloud who happened to have the same mistake to where I can't connect into consideration due to unable to connect error adobe server)

  Please advise because I bought a package of creative software to begin work as soon as possible.

  

  

  Are you looking for a fast feedback today because I can't do my job and everything has been delayed.

  Note of course: I used the creative cloud before this and he happened to have an error (unable to connect to the server from adobe), so I can not connect to the creative cloud. In this case, I uninstalled and reinstalled (using the latest version downloaded or old installers).

  There are so many invisible problem that this can... I realized by myself trying anyway possible associated with actual client errors (instead of strategy/connectivity issues pc & network).

  The solution that you have shared is incorrect, as I mentioned in my post above, I released my linking strategy and etc and the problem well obviously a customer source of creative cloud adobe itself.

  Furthermore, I solved the problem.

• Error when you try to access my library in CC saying "unable to connect to the server.

  I get an error when you try to access my library in CC saying "unable to connect to the server" - is there a solution? I can view them on the web app, but can't access it when I open Adobe Illustrator or other Adobe programs. Help, please! The error appears when I hover over the icon to the left of the trash.

  

  Hello

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Trying to access a virtual machine using Blast and VADC configuration without a connection to the server

  Unless I misread this article , it should be possible.

  It is true that step ' not is not particularly clear, but I'm assuming they meant put the content of all unzipped in a folder called 'portal' on the folder root of IIS (C:\inetpub\wwwroot\portal\). In any case I tried this and create a virtual directory in IIS called 'portal' with the wwwroot files, all two complain that there is no such thing as MainUI.html (and it's not! Learners, I can't find this file on a connection or Security Server - which leads me to believe it is generated by one of the .json files)

  Anyone could pull this off? Any suggestions as to where I have gone wrong?

  You can do this by locating the file portal.war on the login server and copy it to the virtual desktop running VADC in view. The procedure is on page 18 of the VADC Administrator's Guide.

  We will make this procedure easier by allowing this portal.war file be downloadable via VMware-Horizon-View-HTML-Access-y.y.y-xxxxxx.zip instead of first needing to install a connection to the server, but for now just copy the file portal.war and unzip it.

  Mark

• When I connect to the start page of mozilla, I can't go to any other sites Web - get "unable to connect to the server", but I'm still able to access the internet through Internet Explorer on the same computer.

  Cannot move to the start page of Mozilla. Any site or search I run, I get a message that Mozilla can not establish a connection with the server.

  See this support article - difficulty of problems connecting to websites after Firefox update