Remote access PIX - two groups

Hi all

Please is it possible to distinguish two groups of remote access on the radius server?

For example, I have two groups. One for employees and secondly to externalist.

I authentificate the server a radius.

It is possible to distinguish between these two groups on the radius server?

How can I do this?

Because when I create two groups of tunnel and two political groups, I am still able to access the two groups with the users in the Group employee or externalist. And when I look for log on to the IAS server, I couldn't distinguish between the journal entry when I login as employee and when I log in as externalist :(

Thanks in advance

Tomas

Tomas,

OK, so we have 2 groups of tunnel and 2 group policies for groups of tunnel, here's what you have to do.

* First, we close group policy to groups of tunnel so that a single policy would not use the other tunnel-group. To achieve this, some examples of CLI commands

attributes global-tunnel-group test1

strategy-group-by default peche1

tunnel-group test2 General attributes

strategy-group-by default granted.2

attributes of the peche1 group policy

group-lock value test1

policy2 group policy attributes

group-lock value test2

* Now lets do the config on IAS. You should have 2 remote access policies separate created for your groups of 2 different windows in IAS, for example

Remote access policy x

If the Windows group matches "yourdomain\externalist".

Grant access

Remote access policy is

If the Windows group matches "yourdomain\employees".

Grant access

Now in the remote x access policy, click on edit profile > click on advanced > click Add. Choose the attribute "Class". This policy is for externalists and lets say we want to lock windows to the tunnel test1 group group. Then enter UO = Policy1 value in the attribute Class. It is the name of group policy that we have locked in tunnel-group test1

Follow the same path and get into UO = policy2 for remote access policy there, employees windows group.

Concerning

Tags: Cisco Security

Similar Questions

  • Remote access VPN Client to PIX, DNS issue

    Hi all.  I searched on this, but I can't find my answer.

    I set up a VPN connection to a PIX Firewall (running the version 8.0 (4)) for my business.  The VPN connection works correctly, in that I can connect to it using my software (v 5.0.02.0090) Cisco VPN Client and ping servers/resources internal IP address. However, if I try to ping by host name, it does not resolve to an IP address.  If I open a command prompt on my PC and type ipconfig/all, there are no DNS servers for my VPN, just for my normal Intel NIC adapter - I think I should have a DNS server listed under the map of VPN, right?  Here is the relevant (I think) for the VPN config lines:

    8.0 (4) version PIX

    domain xx.xx

    DNS lookup field inside

    DNS server-group DefaultDNS

    Server name 192.168.20.23

    domain xx.xx

    IP local pool vpnpoolIT 10.10.8.2 - 10.10.8.254 mask 255.255.255.0

    Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

    Crypto-map dynamic dyn1 1jeu transform-set FirstSet

    Crypto-map dynamic dyn1 1 lifetime of security association set seconds 28800

    Crypto-map dynamic dyn1 kilobytes of life 1 set security-association 4608000

    crypto ISAKMP policy 1

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    tunnel-group ITGroup type remote access

    tunnel-group ITGroup General attributes

    address vpnpoolIT pool

    Group-RADIUS authentication server

    tunnel-group ITGroup ipsec-attributes

    pre-shared-key *.

    Am I missing?  I can solve the DNS on the PIX itself requests.

    All the info I can find online is for an older version of the PIX software which says that I should enter the vpngroup dns- IP address of the server command, but this command is not available in my version of the software.

    Hello

    To set a DNS server to be injected into the VPN clients when they connect, you can do the following:

    This is the tunnel-group where lands the remote connection:

    tunnel-group ITGroup type remote access

    tunnel-group ITGroup General attributes

    address vpnpoolIT pool

    Group-RADIUS authentication server

    tunnel-group ITGroup ipsec-attributes

    pre-shared-key *.

    For example, create a group policy:

    internal VPN group policy
    attributes of VPN group policy

    DNS value--> x.x.x.x where x.x.x.x is the IP address of the DNS server

    Then, apply the group policy for the Group of tunnel:

    tunnel-group ITGroup General attributes

    Group Policy - by default-VPN

    It will be useful.

    Federico.

  • Remote access VPN with ASA 5510 by using the DHCP server

    Hello

    Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

    I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

    !

    ASA Version 8.2 (5)

    !

    interface Ethernet0/1

    nameif inside

    security-level 100

    IP 10.6.0.12 255.255.254.0

    !

    IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

    !

    Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

    !

    Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto-map dynamic dyn1 1jeu transform-set FirstSet

    dynamic mymap 1 dyn1 ipsec-isakmp crypto map

    mymap map crypto inside interface

    crypto ISAKMP allow inside

    crypto ISAKMP policy 1

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 43200

    !

    VPN-addr-assign aaa

    VPN-addr-assign dhcp

    !

    internal group testgroup strategy

    testgroup group policy attributes

    DHCP-network-scope 10.6.192.1

    enable IPSec-udp

    IPSec-udp-port 10000

    !

    username testlay password * encrypted

    !

    tunnel-group testgroup type remote access

    tunnel-group testgroup General attributes

    strategy-group-by default testgroup

    DHCP-server 10.6.20.3

    testgroup group tunnel ipsec-attributes

    pre-shared key *.

    !

    I got following output when I test connect to the ASA with Cisco VPN client 5.0

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

    4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

    [OK]

    KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

    Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

    Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

    Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

    Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

    Kind regards

    Lay

    For the RADIUS, you need a definition of server-aaa:

    Protocol AAA - NPS RADIUS server RADIUS

    AAA-server RADIUS NPS (inside) host 10.10.18.12

    key *.

    authentication port 1812

    accounting-port 1813

    and tell your tunnel-group for this server:

    General-attributes of VPN Tunnel-group

    Group-NPS LOCAL RADIUS authentication server

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Remote access VPN client to connect but cannot ping inside the host, after that split tunnel is activated (config-joint)

    Hello

    I don't know what could be held, vpn users can ping to the outside and inside of the Cisco ASA interface but can not connect to servers or servers within the LAN ping.

    is hell config please kindly and I would like to know what might happen.

    hostname horse

    domain evergreen.com

    activate 2KFQnbNIdI.2KYOU encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    ins-guard

    !

    interface GigabitEthernet0/0

    LAN description

    nameif inside

    security-level 100

    192.168.200.1 IP address 255.255.255.0

    !

    interface GigabitEthernet0/1

    Description CONNECTION_TO_FREEMAN

    nameif outside

    security-level 0

    IP 196.1.1.1 255.255.255.248

    !

    interface GigabitEthernet0/2

    Description CONNECTION_TO_TIGHTMAN

    nameif backup

    security-level 0

    IP 197.1.1.1 255.255.255.248

    !

    interface GigabitEthernet0/3

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface Management0/0

    Shutdown

    No nameif

    no level of security

    no ip address

    management only

    !

    boot system Disk0: / asa844-1 - k8.bin

    boot system Disk0: / asa707 - k8.bin

    passive FTP mode

    clock timezone WAT 1

    DNS server-group DefaultDNS

    domain green.com

    network of the NETWORK_OBJ_192.168.2.0_25 object

    Subnet 192.168.2.0 255.255.255.128

    network of the NETWORK_OBJ_192.168.202.0_24 object

    192.168.202.0 subnet 255.255.255.0

    network obj_any object

    subnet 0.0.0.0 0.0.0.0

    the DM_INLINE_NETWORK_1 object-group network

    object-network 192.168.200.0 255.255.255.0

    object-network 192.168.202.0 255.255.255.0

    the DM_INLINE_NETWORK_2 object-group network

    object-network 192.168.200.0 255.255.255.0

    object-network 192.168.202.0 255.255.255.0

    access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any

    access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any

    Access extensive list permits all ip a OUTSIDE_IN

    gbnlvpntunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

    standard access list gbnlvpntunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0

    gbnlvpntunnell_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

    standard access list gbnlvpntunnell_splitTunnelAcl allow 192.168.202.0 255.255.255.0

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    backup of MTU 1500

    mask of local pool VPNPOOL 192.168.2.0 - 192.168.2.100 IP 255.255.255.0

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm-645 - 206.bin

    don't allow no asdm history

    ARP timeout 14400

    NAT (inside, outside) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

    NAT (inside, backup) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

    NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

    NAT (inside, backup) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

    !

    network obj_any object

    dynamic NAT interface (inside, backup)

    Access-group interface inside INSIDE_OUT

    Access-group OUTSIDE_IN in interface outside

    Route outside 0.0.0.0 0.0.0.0 196.1.1.2 1 track 10

    Route outside 0.0.0.0 0.0.0.0 197.1.1.2 254

    Timeout xlate 03:00

    Pat-xlate timeout 0:00:30

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    identity of the user by default-domain LOCAL

    Enable http server

    http 192.168.200.0 255.255.255.0 inside

    http 192.168.202.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    monitor SLA 100

    type echo protocol ipIcmpEcho 212.58.244.71 interface outside

    Timeout 3000

    frequency 5

    monitor als 100 calendar life never start-time now

    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    backup_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    backup of crypto backup_map interface card

    Crypto ikev1 allow outside

    Crypto ikev1 enable backup

    IKEv1 crypto policy 10

    authentication crack

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 20

    authentication rsa - sig

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 30

    preshared authentication

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 40

    authentication crack

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 50

    authentication rsa - sig

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 60

    preshared authentication

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 70

    authentication crack

    aes encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 80

    authentication rsa - sig

    aes encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 90

    preshared authentication

    aes encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 100

    authentication crack

    3des encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 110

    authentication rsa - sig

    3des encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 120

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 130

    authentication crack

    the Encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 140

    authentication rsa - sig

    the Encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 150

    preshared authentication

    the Encryption

    sha hash

    Group 2

    life 86400

    !

    track 10 rtr 100 accessibility

    Telnet 192.168.200.0 255.255.255.0 inside

    Telnet 192.168.202.0 255.255.255.0 inside

    Telnet timeout 5

    SSH 192.168.202.0 255.255.255.0 inside

    SSH 192.168.200.0 255.255.255.0 inside

    SSH 0.0.0.0 0.0.0.0 outdoors

    SSH timeout 15

    SSH group dh-Group1-sha1 key exchange

    Console timeout 0

    management-access inside

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    internal group vpntunnel strategy

    Group vpntunnel policy attributes

    Ikev1 VPN-tunnel-Protocol

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list vpntunnel_splitTunnelAcl

    field default value green.com

    internal vpntunnell group policy

    attributes of the strategy of group vpntunnell

    Ikev1 VPN-tunnel-Protocol

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list gbnlvpntunnell_splitTunnelAcl

    field default value green.com

    Green user name encrypted BoEFKkDtbnX5Uy1Q privilege 15 password

    attributes of user name THE

    VPN-group-policy gbnlvpn

    tunnel-group vpntunnel type remote access

    tunnel-group vpntunnel General attributes

    address VPNPOOL pool

    strategy-group-by default vpntunnel

    tunnel-group vpntunnel ipsec-attributes

    IKEv1 pre-shared-key *.

    type tunnel-group vpntunnell remote access

    tunnel-group vpntunnell General-attributes

    address VPNPOOL2 pool

    Group Policy - by default-vpntunnell

    vpntunnell group of tunnel ipsec-attributes

    IKEv1 pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns migrated_dns_map_1

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the migrated_dns_map_1 dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    call-home

    Profile of CiscoTAC-1

    no active account

    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

    email address of destination [email protected] / * /

    destination-mode http transport

    Subscribe to alert-group diagnosis

    Subscribe to alert-group environment

    Subscribe to alert-group monthly periodic inventory

    monthly periodicals to subscribe to alert-group configuration

    daily periodic subscribe to alert-group telemetry

    Cryptochecksum:7c1b1373bf2e2c56289b51b8dccaa565

    Hello

    1 - Please run these commands:

    "crypto isakmp nat-traversal 30.

    "crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.

    The main issue here is that you have two roads floating and outside it has a better than backup metric, that's why I added the command 'reverse-road '.

    Please let me know.

    Thank you.

  • VPN (remote access, ASA5520) with 2 clients, one with Internet and other without Internet

    Hello! I make a VPN with two clients, using the ASA5520 United Nations. Now I have to do what the customer has internet and the other does not. I can do using ACL? How?

    The configuration is:

    interface GigabitEthernet0/0

    nameif outside

    security-level 0

    IP 172.16.31.252 255.255.255.248

    interface GigabitEthernet0/1

    nameif inside

    security-level 100

    IP 172.16.1.237 255.255.255.240

    Access extensive list ip 172.16.1.224 ACLnonat allow 255.255.255.240 host 172.16.1.230

    Standard access list Split_tunnel allow 172.16.1.224 255.255.255.240

    IP local pool testpool 172.16.1.230 - 172.16.1.232 mask 255.255.255.240

    NAT (inside) 0-list of access ACLnonat

    Route outside 0.0.0.0 0.0.0.0 172.16.31.254 1

    Crypto ipsec transform-set esp-3des esp-md5-hmac hw_trans

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto dynamic-map dyn_map 1 transform-set hw_trans

    Crypto dynamic-map dyn_map 1 the value reverse-road

    stat_map 10000 card crypto ipsec-isakmp dynamic dyn_map

    stat_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 3600

    Crypto isakmp nat-traversal 30

    internal hw_policy group policy

    attributes of the strategy of group hw_policy

    value of server DNS 193.205.160.3

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list Split_tunnel

    Split-dns value 193.205.160.3

    username User1 encrypted password privilege 0 pqA3EDHB1cfLxwWn

    password username User2 FIQ1c02tX8lU1wHJ encrypted privilege 0

    attributes of user User2 name

    VPN-framed-ip-address 172.16.1.233 255.255.255.240

    allow password-storage

    type tunnel-group hwclients remote access

    tunnel-group hwclients General-attributes

    address testpool pool

    Group Policy - by default-hw_policy

    hwclients group of tunnel ipsec-attributes

    pre-shared key *.

    ISAKMP retry threshold 30 keepalive 5

    Thanks in advance.

    Hello Jose,.

    I see that you use LOCAL authentication, what you can do is, you can create another political group and link this political group for the user name, example:

    attributes of group PALLET policy

    Split-tunnel-policy tunnelall

    name of User1 user attributes

    RANGE of VPN-group-policy

    The other username will use hw_policy, since it is the default value for the tunnel-group hwclients.

    HTH

    AMatahen

  • authentication of remote access, vpn and ldap

    I have a test environment with 2 hours fireval 5505: the first firewall is remote access VPN server and the Interior of this firewall is a network of domain with a domain controller, DNS server and a workstation. DHCP is disabled and the PC have a static address.outside of the VPN server is attached outside the other ASA 5505 firewall. on the inside of the firewall, there is a workstation.the workstation would be to connect via vpn for remote access on the domain network. I have configured the VPN server for remote access through a wizard and his

    configuration is the following

    Result of the command: "show running-config"

    : Saved

    :

    ASA Version 8.2(1)

    !

    hostname ciscoasa

    domain-name dri.local

    enable password 8Ry2YjIyt7RRXU24 encrypted

    passwd 2KFQnbNIdI.2KYOU encrypted

    names

    !

    interface Vlan1

    nameif inside

    security-level 100

    ip address 10.13.74.5 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    ip address 192.168.30.1 255.255.255.0

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    ftp mode passive

    dns server-group DefaultDNS

    domain-name dri.local

    access-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.240

    access-list outside_access_in extended permit tcp 192.168.50.0 255.255.255.240 10.13.74.0 255.255.255.0

    pager lines 24

    logging asdm informational

    mtu inside 1500

    mtu outside 1500

    ip local pool vpnpool 192.168.50.1-192.168.50.10 mask 255.255.255.0

    icmp unreachable rate-limit 1 burst-size 1

    no asdm history enable

    arp timeout 14400

    global (outside) 1 interface

    nat (inside) 0 access-list inside_nat0_outbound

    nat (inside) 1 0.0.0.0 0.0.0.0

    access-group outside_access_in in interface outside

    route outside 0.0.0.0 0.0.0.0 192.168.30.2 1

    timeout xlate 3:00:00

    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-record DfltAccessPolicy

    action terminate

    dynamic-access-policy-record vpnldap

    network-acl inside_nat0_outbound

    aaa-server vpn protocol ldap

    aaa-server vpn (inside) host 10.13.74.20

    ldap-base-dn DC=DRI,DC=LOCAL

    ldap-group-base-dn cn=test,cn=users,dc=dri,dc=local

    ldap-scope subtree

    ldap-naming-attribute sAMAccountName

    ldap-login-password *

    ldap-login-dn cn=test,cn=users,dc=dri,dc=local

    server-type microsoft

    http server enable

    http 10.13.74.0 255.255.255.0 inside

    no snmp-server location

    no snmp-server contact

    snmp-server enable traps snmp authentication linkup linkdown coldstart

    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac

    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac

    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac

    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac

    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac

    crypto ipsec security-association lifetime seconds 28800

    crypto ipsec security-association lifetime kilobytes 4608000

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5

    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

    crypto map outside_map interface outside

    crypto isakmp enable outside

    crypto isakmp policy 10

    authentication pre-share

    encryption 3des

    hash sha

    group 2

    lifetime 86400

    telnet timeout 5

    ssh timeout 5

    console timeout 0

    dhcpd auto_config outside

    !

    dhcpd address 10.13.74.9-10.13.74.40 inside

    !

    threat-detection basic-threat

    threat-detection statistics access-list

    no threat-detection statistics tcp-intercept

    webvpn

    group-policy drivpn internal

    group-policy drivpn attributes

    dns-server value 10.13.74.20 10.8.2.5

    vpn-tunnel-protocol IPSec l2tp-ipsec

    default-domain value dri.local

    tunnel-group drivpn type remote-access

    tunnel-group drivpn general-attributes

    address-pool vpnpool

    authentication-server-group vpn

    default-group-policy drivpn

    tunnel-group drivpn ipsec-attributes

    pre-shared-key *

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    policy-map type inspect dns preset_dns_map

    parameters

    message-length maximum 512

    policy-map global_policy

    class inspection_default

    inspect dns preset_dns_map

    inspect ftp

    inspect h323 h225

    inspect h323 ras

    inspect rsh

    inspect rtsp

    inspect esmtp

    inspect sqlnet

    inspect skinny

    inspect sunrpc

    inspect xdmcp

    inspect sip

    inspect netbios

    inspect tftp

    !

    service-policy global_policy global

    prompt hostname context

    Cryptochecksum:1fc23fb20a74f208b3cde5711633ad3d

    : end

    When I tried to workstation on the internal part of the second firewall (no remote access vpn server) to connect to the vpn, everything is ok. I used the cisco vpn client, but I can't ping domain controller, workstation, I can't use the shared folder on them. Why?

    Please help me

    Thank you

    Thanks for letting me know! Can you please give the station "answered"? Thank you!

  • Lost remote access to the internal network after upgarding PIX to 7.0

    I improved our box of PIX 515E Cisco to release 6.3 7.0 (5) and lost connectivity outside of the internal servers through a VPN connection. Any ideas as to why or how this happened?

    If you use the split tunneling, this is probably the question.

    Is the bug id: CSCeh69389

    This Bug says:

    When you upgrade a PIX 6.x to 7.0, if split tunneling is underway

    used for remote access clients, then the conversion of config

    process will not convert the list of split tunnel command, because

    the ACL of splitting 6.x tunnel was allowed to be of type 'expanded '.

    whereas in 7.0 the ACL must be ' standard '.

    To solve the problem, take the extended ACL and manually convert it to a

    Standard ACL, specifying the networks you want encrypted. Times

    the new ACL is in the config, it must be applied under the

    Group Policy.

    EX:

    SplitTunnel list standard access allowed 10.1.1.0 255.255.255.0

    internal RemoteAccess group strategy

    Group Policy attributes RemoteAccess

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list SplitTunnel

  • Routing and remote access - on three subnetworked, two subnet unable to reach to the internet!

    Hello

    Good evening everyone.

    I had a problem in Routing and remote access on windows 2003 server.  This server is already configured as a file server, domain server, and application server. Also configured as a router (thanks to access routing & remote) to connect the three different networks with each other. If this server has three NICs installed and each separate NIC network cards represent.

    three different networks are - 192.42.160.0/24, 192.42.161.0/24, 192.42.162.0/24

    Three cards of the NETWORK adapter installed on the server as with the IP - next

    NIC - 1 = 192.42.160.220, Sub - 255.255.255.0, gateway - No.

    NIC - 2 = 192.42.161.220, Sub - 255.255.255.0, gateway - 192.161.220.112 (this ip address for internet access then 4 g router IP)

    -3 = 192.42.162.220, NETWORK cards, Sub - 255.255.255.0, gateway - No.

    Now the question is I can get Internet & (also scathing in router ip 192.42.161.112) one network i.e. - 192.42.161.0/24, BUT when I try to access the internet from another two network (192.42.160.0/24 & 192.42.162.0/24) I can not access and in addition can not ping to internet router ip - 192.42.161.112...

    So, how do I access the internet to another two network also?

    I was already the configuration of static routing for all three network but I wasn't always successful. I don't really know what exactly static routing this should be done in access routing & remote area so that all three network can reach to the internet?

    Here is the result of the current track...

    D:\Documents and Settings\Administrateur > route print

    IPv4 routing table
    ===========================================================================
    List of the interface
    0x1 ........................... MS TCP Loopback interface
    0x2... 00 30 05 8f ad 5 c... Broadcom NetXtreme Gigabit Ethernet - Mi Teefer2
    niport
    0 x 3... 0E 00 c4 f8 a7 0c... Network Intel(r) PRO/1000 GT Desktop Adapter - Teefer2 M
    iniport
    0 x 4... 0E 00 0c a7 c5 85... Intel (r) PRO/1000 GT Desktop Adapter #2 - Teefer
    2 miniport
    ===========================================================================
    ===========================================================================
    Active routes:
    Network Destination gateway metric Interface subnet mask
    0.0.0.0 0.0.0.0 192.42.161.112 192.42.161.220 1
    127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
    192.42.160.0 255.255.255.0 192.42.160.220 192.42.160.220 20
    192.42.160.220 255.255.255.255 127.0.0.1 127.0.0.1 20
    192.42.160.255 255.255.255.255 192.42.160.220 192.42.160.220 20
    192.42.161.0 255.255.255.0 192.42.161.220 192.42.161.220 20
    192.42.161.220 255.255.255.255 127.0.0.1 127.0.0.1 20
    192.42.161.255 255.255.255.255 192.42.161.220 192.42.161.220 20
    192.42.162.0 255.255.255.0 192.42.162.220 192.42.162.220 20
    192.42.162.220 255.255.255.255 127.0.0.1 127.0.0.1 20
    192.42.162.255 255.255.255.255 192.42.162.220 192.42.162.220 20
    224.0.0.0 240.0.0.0 192.42.160.220 192.42.160.220 20
    224.0.0.0 240.0.0.0 192.42.161.220 192.42.161.220 20
    224.0.0.0 240.0.0.0 192.42.162.220 192.42.162.220 20
    255.255.255.255 255.255.255.255 192.42.160.220 192.42.160.220 1
    255.255.255.255 255.255.255.255 192.42.161.220 192.42.161.220 1
    255.255.255.255 255.255.255.255 192.42.162.220 192.42.162.220 1
    Default gateway: 192.42.161.112
    ===========================================================================
    Persistent routes:
    None

    Sorry if I'm not able to explain properly. Please let me know if you have to explain more about it...

    Thank you all.

    Mahesh

    Hello Manu,

    Please post this question in the forums TechNet for Windows Server 2003. They will be able to guide you further.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  • Problem with remote access in a residential group

    Having a problem with desktop sharing remote within a group of home access.  I don't have problem of access to the desktop from the laptop, but for some reason I can't access the laptop from the desktop.  I tried everything I could think of.  Remote access is enabled on both PCs.  Help, please.  Thank you very much!

    Hello

     

    1. who is the operating system installed on the desktop and laptop computers?

    2. what happens when you try to access the laptop from the desktop? You receive an error message?

    3. What are troubleshooting you performed?

    I suggest you follow these methods and check.

    In a first step of troubleshooting, I suggest to run the troubleshooter to group on the source and the destination computer.

    Step 1: Open the troubleshooter group living

    If your computer has problems viewing computers or files shared in your collective housing, try to use the collective dwelling Troubleshooter to fix the problem

    http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

    Step 2: Share files and folders on a group of houses in the laptop using the method proposed below. Try to access from desktop and check.

    a. right click on the item you want to share, and then click share with.

    b. Select Home Group (read/write)

    c. this option share point with your entire Home Group and allows them to open, edit, or delete.

    Share files with someone: http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

    See also:

    Home Group: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

     

    I hope this helps!

  • Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

    Original title: Windows could not start the service of connection manager on the local computer remote access

    amplifier

    Windows could not start the service of connection manager on the local computer remote access

    Error 1068: The dependency Service or group could start.

    Hi sunelchandraoli,

    1. when exactly you receive this error?

    2. you remember to make changes to the computer before this problem?

    Step 1:

    "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

    a. Click Start, type services.msc in the box start the search.

    b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    c. right click on the Remote Access Connection Manager service and then click Properties.

    d. under the general tab, click Manual next to startup type.

    e. under the general tab, click Start under the service status and then click OK.

    f. also check for long-term services.

    The dependency of 'Remote access connection manager' services include:

    i. secure Socket Tunneling Protocol Service

    II. telephone

    III. Plug-and-Play

    IV. Remote Procedure Call (RPC)

    c. of DCOM Server process Launcher

    VI RPC end point mapper.

    Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

    Step 2:

    You can also try a system restore to a prior restore point you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

    Hope this information is useful.

  • How many group Supportepar ASA 5520 vpn for remote access

    Hello

    Howmany vpn group is supported on asa 5520 with configuraion vpn remote access.

    Concerning

    1 if nat-control is disabled and you do not have any other order NAT in your config file, you do not have it. Try to remove the existing "NAT 0" command and "clear xlate."

    2. you must ensure that your network inside know they can go by ASA to access remote vpn client IP. You have any device layer 3 behind the ASA that does the routing. If so, please verify that this is the routing table.

  • PIX 515E and remote access VPN

    I use a PIX 515E with: ASDM Version: 5,0000 51 PIX Version: 8.0 (4) and configure it with remote access VPN.

    I would like to get an email every time that a user login (and or disconnection) to the VPN. Remote clients use the Cisco VPN Client.

    Any help is appreciated,

    Hello

    Here is a link to the email configuration when you log in to the ASA/PIX: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc7

    Then you can create a list of message to send the logs only for the connection/disconnection of the VPN user: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc18

    There is a wire that is linked here: https://supportforums.cisco.com/discussion/10798976/asa-email-logging-issue

  • Remote access VPN pix version 8.0 (3)

    Hi all

    First of all, I would like to thank to all members of the forum who got help in several messages on the configuration of the pix 515.

    I am now configuring remote VPN access with radius authentication to my network, but I can't connect.

    I use the cisco vpn client 5.0.03.0560, I have also tested my pix radius (inside) server authentication and works very well.

    I already tried to retype the key of the cli, but I still can't remote access vpn to work.

    I also tried to create another remote vpn with another name and local authentication, but I have the same problem.

    I use 8.0 (3) version pix.

    Can someone help me

    I attach the log file of the cisco vpn client to help solve the problem, as well a configuration of the pix folder.

    Thank you very much in advance and I seek prior information.

    http://www.Cisco.com/en/us/docs/security/ASA/asa72/configuration/guide/vpnadd.html#wp999516

    [Pls RATE if HELP]

  • Remote access VPN group name and password

    Hi guys,.

    Can someone tell me please the command to display a remote access VPN group name and the password on a firewall version 8.0 of ASA? Any help will be greatly appreciated.

    Thank you

    Lake

    Remote VPN IPsec IKEv1 access are listed as groups of tunnel. If you enter

    more system:running-config | b tunnel-group

    You can see the config sections (starting with the first mention of the tunnel-group) as well as the pre-shared key ikev1 plaintext String.

  • Remote access to PIX very slow

    Using PuTTY to access PIX 501. The typed commands are slow to display. What is a function of high network activity? The above branch network is not very active. Any suggestion would be appreciated.

    Hello

    You access the pix on its external interface via the Internet. So then Yes, it can be very slow. We manage some firewalls pix remotely via internet, and sometimes it can take ages to record key entries.

    HTH

    Jon

Maybe you are looking for