Remote access VPN Cisco ASA

Hello!

I have 9.1 (3) version of Cisco ASA with remote access VPN set UP on the outside interface. When the user connects to the Internet on the outside interface, it works well. My goal is to allow the connection of all other interfaces (inside the dmz and etc.) to the outside interface. Cisco ASA allows to do? Order to packet - trace output is less to:

MSK-hq-fw1 # packet - trace entry inside tcp 10.10.10.1 14214 1.1.1.2 443

Phase: 1

Type:-ROUTE SEARCH

Subtype: entry

Result: ALLOW

Config:

Additional information:

developed 1.1.1.2 255.255.255.255 identity

Phase: 2

Type:-ROUTE SEARCH

Subtype: entry

Result: ALLOW

Config:

Additional information:

developed 1.1.1.2 255.255.255.255 identity

Result:

input interface: inside

entry status: to the top

entry-line-status: to the top

the output interface: NP identity Ifc

the status of the output: to the top

output-line-status: to the top

Action: drop

Drop-reason: (headwall) No. road to host

Hello

Well, you can of course turn VPN on other interfaces, but to be honest, I never even tried to set up the VPN it otherwise than of multiple multiple external interfaces in the case of the ISP and in this case only for testing purposes.

Some things related to the ASA are well known but not well documented.

The official document that I can remember: this is the following (which only refers to this limitation regarding the ICMP)

Note 


For  security purposes the security appliance does not support far-end  interface ping, that is pinging the IP address of the outside interface  from the inside network.

Source (old configuration guide):

http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa71/configuration/guide/conf_gd/trouble.html#wp1059645

-Jouni

Tags: Cisco Security

Similar Questions

  • Remote access VPN with ASA 5510 by using the DHCP server

    Hello

    Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

    I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

    !

    ASA Version 8.2 (5)

    !

    interface Ethernet0/1

    nameif inside

    security-level 100

    IP 10.6.0.12 255.255.254.0

    !

    IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

    !

    Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

    !

    Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto-map dynamic dyn1 1jeu transform-set FirstSet

    dynamic mymap 1 dyn1 ipsec-isakmp crypto map

    mymap map crypto inside interface

    crypto ISAKMP allow inside

    crypto ISAKMP policy 1

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 43200

    !

    VPN-addr-assign aaa

    VPN-addr-assign dhcp

    !

    internal group testgroup strategy

    testgroup group policy attributes

    DHCP-network-scope 10.6.192.1

    enable IPSec-udp

    IPSec-udp-port 10000

    !

    username testlay password * encrypted

    !

    tunnel-group testgroup type remote access

    tunnel-group testgroup General attributes

    strategy-group-by default testgroup

    DHCP-server 10.6.20.3

    testgroup group tunnel ipsec-attributes

    pre-shared key *.

    !

    I got following output when I test connect to the ASA with Cisco VPN client 5.0

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

    4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

    [OK]

    KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

    Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

    Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

    Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

    Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

    Kind regards

    Lay

    For the RADIUS, you need a definition of server-aaa:

    Protocol AAA - NPS RADIUS server RADIUS

    AAA-server RADIUS NPS (inside) host 10.10.18.12

    key *.

    authentication port 1812

    accounting-port 1813

    and tell your tunnel-group for this server:

    General-attributes of VPN Tunnel-group

    Group-NPS LOCAL RADIUS authentication server

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Unable to SSH/telnet through the remote access VPN to ASA interface

    Hi all - im trying to SSH/telnet to my ASA in my remote access VPN tunnel but

    can't get this to work.  what Miss me?

    remote access VPN subnet: 192.168.25.0

    LAN subnet: 192.168.1.0

    config is attached.  THX-

    Please enter the command

    Private access Managament

    and you will be able to telnet/ssh to the asa on this ip 192.168.1.253

  • Problem with remote access VPN on ASA 5505

    I currently have a problem of an ASA 5505 configuration to connect via VPN remote access by using the Cisco VPN Client 5.0.07.0440 under Windows 8 Pro x 64. The VPN client will prompt you for the user name and password during the connection process, but fails soon after.

    The VPN client connects is as follows:

    ---------------------------------------------------------------------------------------------------------------------------------------

    Cisco Systems VPN Client Version 5.0.07.0440

    Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.

    Customer type: Windows, Windows NT

    Running: 6.2.9200

    2 15:09:21.240 11/12/12 Sev = Info/4 CM / 0 x 63100002

    Start the login process

    3 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100004

    Establish a secure connection

    4 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100024

    Attempt to connect with the server "*." **. ***. *** »

    5 15:09:21.287 11/12/12 Sev = Info/6 IKE/0x6300003B

    Try to establish a connection with *. **. ***. ***.

    6 15:09:21.287 11/12/12 Sev = Info/4 IKE / 0 x 63000001

    From IKE Phase 1 negotiation

    7 15:09:21.303 11/12/12 Sev = Info/4 IKE / 0 x 63000013

    SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***

    8 15:09:21.365 11/12/12 Sev = Info/6 GUI/0x63B00012

    Attributes of the authentication request is 6: 00.

    9 15:09:21.334 11/12/12 Sev = Info/5 IKE/0x6300002F

    Received packet of ISAKMP: peer = *. **. ***. ***

    10 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000014

    RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

    11 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

    Peer is a compatible peer Cisco-Unity

    12 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

    Peer supports XAUTH

    13 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

    Peer supports the DPD

    14 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

    Peer supports NAT - T

    15 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

    Peer supports fragmentation IKE payloads

    16 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000001

    IOS Vendor ID successful construction

    17 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000013

    SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***

    18 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000055

    Sent a keepalive on the IPSec Security Association

    19 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000083

    IKE port in use - Local Port = 0xFBCE, Remote Port = 0 x 1194

    20 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000072

    Automatic NAT detection status:

    Remote endpoint is NOT behind a NAT device

    This effect is behind a NAT device

    21 15:09:21.334 11/12/12 Sev = Info/4 CM/0x6310000E

    ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

    22 15:09:21.365 11/12/12 Sev = Info/5 IKE/0x6300002F

    Received packet of ISAKMP: peer = *. **. ***. ***

    23 15:09:21.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014

    RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

    24 15:09:21.365 11/12/12 Sev = Info/4 CM / 0 x 63100015

    Launch application xAuth

    25 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700008

    IPSec driver started successfully

    26 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

    Remove all keys

    27 15:09:27.319 11/12/12 Sev = Info/4 CM / 0 x 63100017

    xAuth application returned

    28 15:09:27.319 11/12/12 Sev = Info/4 IKE / 0 x 63000013

    SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

    29 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300002F

    Received packet of ISAKMP: peer = *. **. ***. ***

    30 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014

    RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

    31 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013

    SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

    32 15:09:27.365 11/12/12 Sev = Info/4 CM/0x6310000E

    ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

    33 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300005E

    Customer address a request from firewall to hub

    34 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013

    SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

    35 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300002F

    Received packet of ISAKMP: peer = *. **. ***. ***

    36 15:09:27.397 11/12/12 Sev = Info/4 IKE / 0 x 63000014

    RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

    37 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

    MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70

    38 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

    MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0

    39 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

    MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1

    40 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

    MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8

    41 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

    MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001

    42 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E

    MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO

    43 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

    MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

    44 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E

    MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (5) built by manufacturers on Saturday, May 20, 11 16:00

    45 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

    MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

    46 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

    MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194

    47 15:09:27.397 11/12/12 Sev = Info/4 CM / 0 x 63100019

    Data in mode Config received

    48 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000056

    Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0

    49 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000013

    SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***

    50 15:09:27.444 11/12/12 Sev = Info/5 IKE/0x6300002F

    Received packet of ISAKMP: peer = *. **. ***. ***

    51 15:09:27.444 11/12/12 Sev = Info/4 IKE / 0 x 63000014

    RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

    52 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000045

    Answering MACHINE-LIFE notify has value of 86400 seconds

    53 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000047

    This SA was already alive for 6 seconds, setting expiration 86394 seconds now

    54 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F

    Received packet of ISAKMP: peer = *. **. ***. ***

    55 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014

    RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

    56 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000013

    SEND to > ISAKMP OAK INFO *(HASH, DEL) to *. **. ***. ***

    57 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000049

    IPsec security association negotiation made scrapped, MsgID = CE99A8A8

    58 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000017

    Marking of IKE SA delete (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED

    59 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F

    Received packet of ISAKMP: peer = *. **. ***. ***

    60 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000058

    Received an ISAKMP for a SA message no assets, I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924

    61 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014

    RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">

    62 15:09:27.490 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

    Remove all keys

    63 15:09:30.475 11/12/12 Sev = Info/4 IKE/0x6300004B

    IKE negotiation to throw HIS (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED

    64 15:09:30.475 11/12/12 Sev = Info/4 CM / 0 x 63100012

    ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED".  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

    65 15:09:30.475 11/12/12 Sev = Info/5 CM / 0 x 63100025

    Initializing CVPNDrv

    66 15:09:30.475 11/12/12 Sev = Info/6 CM / 0 x 63100046

    Set indicator established tunnel to register to 0.

    67 15:09:30.475 11/12/12 Sev = Info/4 IKE / 0 x 63000001

    Signal received IKE to complete the VPN connection

    68 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

    Remove all keys

    69 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

    Remove all keys

    70 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

    Remove all keys

    71 15:09:30.475 11/12/12 Sev = Info/4 IPSEC/0x6370000A

    IPSec driver successfully stopped

    ---------------------------------------------------------------------------------------------------------------------------------------

    The running configuration is the following (there is a VPN site-to-site set up as well at an another ASA 5505, but that works perfectly):

    : Saved

    :

    ASA Version 8.2 (5)

    !

    hostname NCHCO

    Select hTjwXz/V8EuTw9p9 of encrypted password

    hTjwXz/V8EuTw9p9 of encrypted passwd

    names of

    description of NCHCO name 192.168.2.0 City offices

    name 192.168.2.80 VPN_End

    name 192.168.2.70 VPN_Start

    !

    interface Ethernet0/0

    switchport access vlan 2

    Speed 100

    full duplex

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.2.1 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address **. ***. 255.255.255.248

    !

    boot system Disk0: / asa825 - k8.bin

    passive FTP mode

    access extensive list ip NCHCO 255.255.255.0 outside_nat0_outbound allow 192.168.1.0 255.255.255.0

    access extensive list ip NCHCO 255.255.255.0 inside_nat0_outbound allow 192.168.1.0 255.255.255.0

    inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224

    access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap allow 192.168.1.0 255.255.255.0

    access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap_1 allow 192.168.1.0 255.255.255.0

    Standard access list LAN_Access allow NCHCO 255.255.255.0

    LAN_Access list standard access allowed 0.0.0.0 255.255.255.0

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 645.bin

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 1 0.0.0.0 0.0.0.0

    NAT (outside) 0-list of access outside_nat0_outbound

    Route outside 0.0.0.0 0.0.0.0 74.219.208.49 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    network-acl outside_nat0_outbound

    WebVPN

    SVC request to enable default svc

    Enable http server

    http 192.168.1.0 255.255.255.0 inside

    http *. **. ***. 255.255.255.255 outside

    http 74.218.158.238 255.255.255.255 outside

    http NCHCO 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set esp-3des esp-sha-hmac l2tp-transform

    Crypto ipsec transform-set l2tp-transformation mode transit

    Crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac

    Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

    Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

    Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5

    Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    crypto dynamic-map dyn-map 10 set pfs Group1

    crypto dynamic-map dyn-map transform 10-set, vpn l2tp-transformation-transformation

    dynamic-map encryption dyn-map 10 value reverse-road

    Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5

    card crypto outside_map 1 match address outside_1_cryptomap

    card crypto outside_map 1 set pfs Group1

    peer set card crypto outside_map 1 74.219.208.50

    card crypto outside_map 1 set of transformation-ESP-3DES-SHA

    map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    inside crypto map inside_map interface

    card crypto vpn-map 1 match address outside_1_cryptomap_1

    card crypto vpn-card 1 set pfs Group1

    set vpn-card crypto map peer 1 74.219.208.50

    card crypto vpn-card 1 set of transformation-ESP-3DES-SHA

    dynamic vpn-map 10 dyn-map ipsec isakmp crypto map

    crypto isakmp identity address

    crypto ISAKMP allow inside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    crypto ISAKMP policy 15

    preshared authentication

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 35

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP ipsec-over-tcp port 10000

    enable client-implementation to date

    Telnet 192.168.1.0 255.255.255.0 inside

    Telnet NCHCO 255.255.255.0 inside

    Telnet timeout 5

    SSH 192.168.1.0 255.255.255.0 inside

    SSH NCHCO 255.255.255.0 inside

    SSH timeout 5

    Console timeout 0

    dhcpd address 192.168.2.150 - 192.168.2.225 inside

    dhcpd dns 216.68.4.10 216.68.5.10 interface inside

    lease interface 64000 dhcpd inside

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    internal DefaultRAGroup group strategy

    attributes of Group Policy DefaultRAGroup

    value of server DNS 192.168.2.1

    Protocol-tunnel-VPN IPSec l2tp ipsec

    nchco.local value by default-field

    attributes of Group Policy DfltGrpPolicy

    value of server DNS 192.168.2.1

    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

    allow password-storage

    enable IPSec-udp

    enable dhcp Intercept 255.255.255.0

    the address value VPN_Pool pools

    internal NCHVPN group policy

    NCHVPN group policy attributes

    value of 192.168.2.1 DNS Server 8.8.8.8

    Protocol-tunnel-VPN IPSec l2tp ipsec

    value by default-field NCHCO

    admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username

    username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg

    username, encrypted NCHvpn99 QhZZtJfwbnowceB7 password

    attributes global-tunnel-group DefaultRAGroup

    address (inside) VPN_Pool pool

    address pool VPN_Pool

    authentication-server-group (inside) LOCAL

    authentication-server-group (outside LOCAL)

    LOCAL authority-server-group

    authorization-server-group (inside) LOCAL

    authorization-server-group (outside LOCAL)

    Group Policy - by default-DefaultRAGroup

    band-Kingdom

    band-band

    IPSec-attributes tunnel-group DefaultRAGroup

    pre-shared key *.

    NOCHECK Peer-id-validate

    tunnel-group DefaultRAGroup ppp-attributes

    No chap authentication

    no authentication ms-chap-v1

    ms-chap-v2 authentication

    tunnel-group DefaultWEBVPNGroup ppp-attributes

    PAP Authentication

    ms-chap-v2 authentication

    tunnel-group 74.219.208.50 type ipsec-l2l

    IPSec-attributes tunnel-group 74.219.208.50

    pre-shared key *.

    type tunnel-group NCHVPN remote access

    attributes global-tunnel-group NCHVPN

    address pool VPN_Pool

    Group Policy - by default-NCHVPN

    IPSec-attributes tunnel-group NCHVPN

    pre-shared key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    Cryptochecksum:15852745977ff159ba808c4a4feb61fa

    : end

    ASDM image disk0: / asdm - 645.bin

    ASDM VPN_Start 255.255.255.255 inside location

    ASDM VPN_End 255.255.255.255 inside location

    don't allow no asdm history

    Anyone have any idea why this is happening?

    Thank you!

    Add, crypto dynamic-map outside_dyn_map 20 value reverse-road.

    With respect,

    Safwan

  • Remote access VPN Cisco 1811

    Hi forum

    My question is very simple. At my office, we have a Cisco 1811 router that is connected to our internal network. Dialer0 is connected to our ISP. We have an IPSEC tunnel running between one of the branches to a different place. Our 1811 is not a mainstream, and we have another firewall for remote users. But the problem is one of the workstations is a MAC book wouldn't connect to our firewall so I had him put through 1811 to access internal resources.

    Since I am under an IPSEC tunnel on the interface dialer0 how to configure VPN Client Access and how I map it to the dialer interface.

    Your help is greatly appreciated

    Thank you

    Attached, is an example of configuration that you can use to serve the site-site static and dynamic remote access on the same router.  Please let me know if you have any specific questions.

  • Remote access VPN without certificate

    Hi all

    I want to deploy remote access VPN to ASA using Cisco anyconnect version 5512 customer secure mobility 3.1.05152. However, it must be a valid certificate of a CA such as verisign, entrust...

    Is - it there anyway that I can use the certificate auto-signer? Thank you for helping me!

    Hi Harry,.

    I think it would always be possible to configure the VPN just with simple authentication AAA.

    In my opinion you just set up your client to check worthy of trust of the certificate installed on your ASA.

    Please uncheck as on sccreenshot:

    Thank you

    Jan

  • Cisco Asa 5505 and level 3 with remote access VPN switch

    Today I had a new CISCO LAYER 3 switch... So here's my scenrio

    Cisco Asa 5505

    I have

    Outside of the == 155.155.155.x

    Inside = 192.168.7.1

    Address POOL VPN = 10.10.10.1 - 10.10.10.20

    3 layer switch configuration

    VLAN 2

    ip address of the interface = 192.168.1.1

    VLAN 2

    ip address of the interface = 192.168.2.1

    VLAN 2

    ip address of 192.168.3.1 = interface

    VLAN 2

    ip address of the interface = 192.168.4.1

    VLAN 2

    ip address of the interface = 192.168.5.1

    IP Routing

    So I want the customers of my remote access VPN to access all that these networks. So please can you give me a useful tip or a link to set up the rest of my trip

    Thanks to you all

    Al ready has responded

    Sent by Cisco Support technique iPad App

  • ODA IP ASA when you browse the web via remote access vpn

    Hi all

    I was wondering if it is possible to configure an ASA5510 in a way to allow users remote access VPN use external IP of the ASA when browsing the web. So what I'm looking for is a solution to hide my IP address and use the IP address of the ASA, when browsing.

    The firmware version of the ASA is 9.1 (6)

    Thanks in advance

    Hello

    What you want to achieve is calles u-turn.

    You must enable the feature allowed same-security-traffic intra-interface

    For the configuration of the asa, here's the Cisco documentation (I don't copy paste on the post):

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

    Thank you

    PS: Please do not forget to rate and score as good response if this solves your problem

  • Service of ASA module does on 6509-E support remote access VPN?

    I'm having a problem of configuration of remote access VPN (SSL, Anyconnect ect.) on the Module of ASA Service on 6509-E. It is even supported or I'm wasting my time trying to do something that won't work in a first place :) to work? Site-to-Site works without any problem.

    Technical info:

    6509-E current SUP 2 t SY 15.1 (2)

    Module of ASA - WS-SVC-ASA-SM1 running of the image - asa912-smp-k8 & asdm-712

    Licenses on ASA:

    Encryption--Activated

    3DES-AES-Encryption - enabled

    Thank you for the support.

    You run multiple context mode?

    If you are, access remote VPN only is not supported in this case:

    "Note several context mode only applies to the IKEv2 and IKEv1 site to another and applies not to the AnyConnect, clientless SSL VPN, the legacy Cisco VPN, native VPN client client of Apple, the VPN client from Microsoft or cTCP for IKEv1 IPsec."

    Reference.

  • ASA remote access VPN cleaning

    Experts,

    I have about three or four remote access VPN that must be removed from my ASA. What is the best way to ensure that I remove all configurations of the ASA? Thank you. Best.

    Hi Thomas,

    You can run the command "clear configure vpn" to clear some vpn commands, if you do not have all the certificates or site to site, you can run the command "claire configure crypto" and remove any command associated crypto.

    Rate if helps.

    -Randy-

  • ASA 5505 - remote access VPN to access various internal networks

    Hi all

    A customer has an ASA 5505 with a remote access vpn. They are moving their internal network to a new regime and that you would be the users who come on the vpn to access the existing and new networks. Currently can only access the existing. When users connect to access remote vpn, the asa gave them the address 192.168.199.x. The current internal network is 200.190.1.x and that they would reach their new network of 10.120.110.x.

    Here is the config:

    :

    ASA Version 8.2 (5)

    !

    ciscoasa hostname

    enable encrypted password xxx

    XXX encrypted passwd

    names of

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 200.190.1.15 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address 255.255.255.0 xxxxxxx

    !

    exec banner the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED

    connection of the banner the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED

    banner asdm the ACCESS NOT AUTHORIZED IS STRICTLY PROHIBITED

    passive FTP mode

    access extensive list ip 200.190.1.0 inside_access_in allow 255.255.255.0 any

    outside_access_in list extended access permit icmp any external interface

    access extensive list ip 192.168.199.0 outside_access_in allow 255.255.255.192 host 10.120.110.0

    Standard access list MD_IPSEC_Tun_Gp_splitTunnelAcl allow 200.190.1.0 255.255.255.0

    MD_IPSEC_Tun_Gp_splitTunnelAcl list standard access allowed host 10.120.110.0

    access extensive list ip 200.190.1.0 inside_nat0_outbound allow 255.255.255.0 192.168.199.0 255.255.255.192

    inside_nat0_outbound list extended access allowed host ip 10.120.110.0 192.168.199.0 255.255.255.192

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    mask 192.168.199.10 - 192.168.199.50 255.255.255.0 IP local pool Remote_IPSEC_VPN_Pool

    IP verify reverse path to the outside interface

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 1 200.190.1.0 255.255.255.0

    inside_access_in access to the interface inside group

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 190.213.43.1 1

    Route inside 10.120.110.0 255.255.255.0 200.190.1.50 1

    Route inside 192.168.50.0 255.255.255.0 200.190.1.56 1

    Route inside 192.168.60.0 255.255.255.0 200.190.1.56 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    http server enable 10443

    http server idle-timeout 5

    Server of http session-timeout 30

    HTTP 200.190.1.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    Crypto ca trustpoint _SmartCallHome_ServerCA

    Configure CRL

    Crypto ca certificate chain _SmartCallHome_ServerCA

    certificate ca 6ecc7aa5a7032009b8cebcf4e952d491

    (omitted)

    quit smoking

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Crypto isakmp nat-traversal 3600

    Telnet timeout 5

    SSH 200.190.1.0 255.255.255.0 inside

    SSH timeout 5

    SSH version 2

    Console timeout 5

    dhcpd outside auto_config

    !

    a basic threat threat detection

    scanning-threat shun threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    allow outside

    internal MD_SSL_Gp_Pol group strategy

    attributes of Group Policy MD_SSL_Gp_Pol

    VPN-tunnel-Protocol webvpn

    WebVPN

    list of URLS no

    disable the port forward

    hidden actions no

    disable file entry

    exploration of the disable files

    disable the input URL

    internal MD_IPSEC_Tun_Gp group strategy

    attributes of Group Policy MD_IPSEC_Tun_Gp

    value of banner welcome to remote VPN

    VPN - connections 1

    VPN-idle-timeout 5

    Protocol-tunnel-VPN IPSec webvpn

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list MD_IPSEC_Tun_Gp_splitTunnelAcl

    the address value Remote_IPSEC_VPN_Pool pools

    WebVPN

    value of the RDP URL-list

    attributes of username (omitted)

    VPN-group-policy MD_IPSEC_Tun_Gp

    type of remote access service

    type tunnel-group MD_SSL_Profile remote access

    attributes global-tunnel-group MD_SSL_Profile

    Group Policy - by default-MD_SSL_Gp_Pol

    type tunnel-group MD_IPSEC_Tun_Gp remote access

    attributes global-tunnel-group MD_IPSEC_Tun_Gp

    address pool Remote_IPSEC_VPN_Pool

    Group Policy - by default-MD_IPSEC_Tun_Gp

    IPSec-attributes tunnel-group MD_IPSEC_Tun_Gp

    pre-shared key *.

    !

    !

    context of prompt hostname

    : end

    The following ACL and NAT exemption ACL split tunnel is incorrect:

    MD_IPSEC_Tun_Gp_splitTunnelAcl list standard access allowed host 10.120.110.0

    inside_nat0_outbound list extended access allowed host ip 10.120.110.0 192.168.199.0 255.255.255.192

    It should have been:

    Standard access list MD_IPSEC_Tun_Gp_splitTunnelAcl allow 10.120.110.0 255.255.255.0

    access extensive list ip 10.120.110.0 inside_nat0_outbound allow 255.255.255.0 192.168.199.0 255.255.255.192

    Then 'clear xlate' and reconnect with the VPN Client.

    Hope that helps.

  • Remote access VPN user permission

    Hi support them.

    It is a way for a remote access VPN to allow some users access to "Host A, B, C" and other users to access hosts D, E, F? Basically, we want to have some users have access at home to a few servers and other users have access only to some other servers. Is this possible without a GANYMEDE or some other device? Thank you guys!

    Hi John,.

    Yes, you can configure split tunneling to allow a specific group of users access to specific hosts.
    How this is achieved, it is that you create a connection profile different for different users, associate a policy group and the title of each group policy, you have a split tunnelling access-list defined with entries of different hosts.

    You must create 2 profiles of connection here and match them with 2-group policy allowing access to 2 differernt resources (they can be multiple as well)

    Here is a reference document: -.

    http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/100936-asa8x-split-tunnel-AnyConnect-config.html

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • PIX 515E and remote access VPN

    I use a PIX 515E with: ASDM Version: 5,0000 51 PIX Version: 8.0 (4) and configure it with remote access VPN.

    I would like to get an email every time that a user login (and or disconnection) to the VPN. Remote clients use the Cisco VPN Client.

    Any help is appreciated,

    Hello

    Here is a link to the email configuration when you log in to the ASA/PIX: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc7

    Then you can create a list of message to send the logs only for the connection/disconnection of the VPN user: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc18

    There is a wire that is linked here: https://supportforums.cisco.com/discussion/10798976/asa-email-logging-issue

  • Road of default remote access VPN session

    ASA version 8.2.2

    How do you assign remote access VPN sessions a single default route?  Other than the default route assigned to ASA.  For example, my VPN ASA (handles vpn sessions), defaults to the Internet.  I wish that sessions VPN for remote access by default internal network first, then follow the default route to the Internet on another firewall.

    The SAA outside the IP address of the interface is a public.  Inside is a private 10.x.x.x.  VPN clients receive 172.17.x.x.

    Thank you

    After the command 'road' added keyword "tunnel".

    in the tunnel

    Specifies the route as the default gateway of tunnel for the VPN traffic.

    http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/QR.html#wp1767323

  • Remote access VPN pix version 8.0 (3)

    Hi all

    First of all, I would like to thank to all members of the forum who got help in several messages on the configuration of the pix 515.

    I am now configuring remote VPN access with radius authentication to my network, but I can't connect.

    I use the cisco vpn client 5.0.03.0560, I have also tested my pix radius (inside) server authentication and works very well.

    I already tried to retype the key of the cli, but I still can't remote access vpn to work.

    I also tried to create another remote vpn with another name and local authentication, but I have the same problem.

    I use 8.0 (3) version pix.

    Can someone help me

    I attach the log file of the cisco vpn client to help solve the problem, as well a configuration of the pix folder.

    Thank you very much in advance and I seek prior information.

    http://www.Cisco.com/en/us/docs/security/ASA/asa72/configuration/guide/vpnadd.html#wp999516

    [Pls RATE if HELP]

Maybe you are looking for

  • sort by artist songs

    Hello! Sorry, my English is very bad. As I've done the new update (ios 10), the songs are sorted by the artist and not by their name. It is very unpleasant. Anyone of you knows how to sort by name? Thank you

  • HP G62-b50EM Notebook PC Wifi

    Hello I have reinstaled my x 86(32 bit) windows 7 and I installed the drivers from here and everything works except the wifi, I have access to the internet when I connect it with the cable. When I was editing pilots he said that he could not been ins

  • Standby restore

    My icon watches over Windows XP went dark.  There is no option watch on the power management tab.  What should do?

  • I received this fatal error, how do I do?

    That's what I got: A fatal error has been detected by Java runtime environment:## EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0 x 00000000, pid = 728, tid = 6116## Version JRE: 6.0_26 - b03# Java VM: Java hotspot Client VM (20, 1 - b02 mixed mode

  • my language has changed between English and symbols, and I do not know how to change back

    my language has changed between English and symbols, and I do not know how to change back