Remote access VPN group name and password

Hi guys,.

Can someone tell me please the command to display a remote access VPN group name and the password on a firewall version 8.0 of ASA? Any help will be greatly appreciated.

Thank you

Lake

Remote VPN IPsec IKEv1 access are listed as groups of tunnel. If you enter

more system:running-config | b tunnel-group

You can see the config sections (starting with the first mention of the tunnel-group) as well as the pre-shared key ikev1 plaintext String.

Tags: Cisco Security

Similar Questions

using the group name and password group in client anyconnect

Hello. Is it possible to use the group name/password of the legacy in customer cisco anyconnect vpn client? I checked the AnyConnect Administrator's Guide ' VPN XML Reference"and found nothing on this subject.

It's true.

AnyConnect Secure Mobility Client (VPN Module) can be used to connect to both types of VPN remote access:

1. full SSL VPN tunnel

2 IKEv2 VPN IPsec.

The legacy VPN client is used only with the old IKEv1 IPsec VPN and you cannot use this type of VPN client AnyConnect.

authentication of remote access, vpn and ldap

I have a test environment with 2 hours fireval 5505: the first firewall is remote access VPN server and the Interior of this firewall is a network of domain with a domain controller, DNS server and a workstation. DHCP is disabled and the PC have a static address.outside of the VPN server is attached outside the other ASA 5505 firewall. on the inside of the firewall, there is a workstation.the workstation would be to connect via vpn for remote access on the domain network. I have configured the VPN server for remote access through a wizard and his

configuration is the following

Result of the command: "show running-config"

: Saved

ASA Version 8.2(1)

hostname ciscoasa

domain-name dri.local

enable password 8Ry2YjIyt7RRXU24 encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

names

interface Vlan1

nameif inside

security-level 100

ip address 10.13.74.5 255.255.255.0

interface Vlan2

nameif outside

security-level 0

ip address 192.168.30.1 255.255.255.0

interface Ethernet0/0

switchport access vlan 2

interface Ethernet0/1

interface Ethernet0/2

interface Ethernet0/3

interface Ethernet0/4

interface Ethernet0/5

interface Ethernet0/6

interface Ethernet0/7

ftp mode passive

dns server-group DefaultDNS

domain-name dri.local

access-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.240

access-list outside_access_in extended permit tcp 192.168.50.0 255.255.255.240 10.13.74.0 255.255.255.0

pager lines 24

logging asdm informational

mtu inside 1500

mtu outside 1500

ip local pool vpnpool 192.168.50.1-192.168.50.10 mask 255.255.255.0

icmp unreachable rate-limit 1 burst-size 1

no asdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 0 access-list inside_nat0_outbound

nat (inside) 1 0.0.0.0 0.0.0.0

access-group outside_access_in in interface outside

route outside 0.0.0.0 0.0.0.0 192.168.30.2 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-record DfltAccessPolicy

action terminate

dynamic-access-policy-record vpnldap

network-acl inside_nat0_outbound

aaa-server vpn protocol ldap

aaa-server vpn (inside) host 10.13.74.20

ldap-base-dn DC=DRI,DC=LOCAL

ldap-group-base-dn cn=test,cn=users,dc=dri,dc=local

ldap-scope subtree

ldap-naming-attribute sAMAccountName

ldap-login-password *

ldap-login-dn cn=test,cn=users,dc=dri,dc=local

server-type microsoft

http server enable

http 10.13.74.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac

crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac

crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac

crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac

crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac

crypto ipsec security-association lifetime seconds 28800

crypto ipsec security-association lifetime kilobytes 4608000

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5

crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

crypto map outside_map interface outside

crypto isakmp enable outside

crypto isakmp policy 10

authentication pre-share

encryption 3des

hash sha

group 2

lifetime 86400

telnet timeout 5

ssh timeout 5

console timeout 0

dhcpd auto_config outside

dhcpd address 10.13.74.9-10.13.74.40 inside

threat-detection basic-threat

threat-detection statistics access-list

no threat-detection statistics tcp-intercept

webvpn

group-policy drivpn internal

group-policy drivpn attributes

dns-server value 10.13.74.20 10.8.2.5

vpn-tunnel-protocol IPSec l2tp-ipsec

default-domain value dri.local

tunnel-group drivpn type remote-access

tunnel-group drivpn general-attributes

address-pool vpnpool

authentication-server-group vpn

default-group-policy drivpn

tunnel-group drivpn ipsec-attributes

pre-shared-key *

class-map inspection_default

match default-inspection-traffic

policy-map type inspect dns preset_dns_map

parameters

message-length maximum 512

policy-map global_policy

class inspection_default

inspect dns preset_dns_map

inspect ftp

inspect h323 h225

inspect h323 ras

inspect rsh

inspect rtsp

inspect esmtp

inspect sqlnet

inspect skinny

inspect sunrpc

inspect xdmcp

inspect sip

inspect netbios

inspect tftp

service-policy global_policy global

prompt hostname context

Cryptochecksum:1fc23fb20a74f208b3cde5711633ad3d

: end

When I tried to workstation on the internal part of the second firewall (no remote access vpn server) to connect to the vpn, everything is ok. I used the cisco vpn client, but I can't ping domain controller, workstation, I can't use the shared folder on them. Why?

Please help me

Thank you

Thanks for letting me know! Can you please give the station "answered"? Thank you!

PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

Vista - Windows 7 network connection. username and password is unknown.

Hello

I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

If someone could answer this question, it would be great.

Hello

Maybe this can help.

Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

Public share = network Public (as Internet Café) in order to reduce security risks.

For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

http://www.ezlan.NET/Win7/net_name.jpg

Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

------------------------------

If your network consists only of Win 7 and you want a simple network, use it.

http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

After you have configured the homegroup, scroll to the bottom for the Permission/security section.

-----------------------------

Win 7 networking with other version of Windows as a work network.

In the center of the network, by clicking on the type of network opens the window to the right.

Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

http://www.ezlan.NET/Win7/net_type.jpg

Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

-------------

If you have authorization and security problems, check the following settings.

Point to a folder that wants to share do right click and choose Properties.

In the properties

Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

This screen shot is to Win 7, Vista menus are similar.

http://www.ezlan.NET/Win7/permission-security.jpg

The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

When everything is OK, restart the network (router and computer).

* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

---------------------

*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

Jack-MVP Windows Networking. WWW.EZLAN.NET

"The specified network folder is currently mapped using a different user name and password", trying to connect to a remote drive.

Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.

I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.

The message is bad because:

1. the specified network (action2 in my example) folder is not mapped at all, and

2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.

The error message is wrong in two respects.

This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials. It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.

David Walker

PIX 515E and remote access VPN

I use a PIX 515E with: ASDM Version: 5,0000 51 PIX Version: 8.0 (4) and configure it with remote access VPN.

I would like to get an email every time that a user login (and or disconnection) to the VPN. Remote clients use the Cisco VPN Client.

Any help is appreciated,

Hello

Here is a link to the email configuration when you log in to the ASA/PIX: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc7

Then you can create a list of message to send the logs only for the connection/disconnection of the VPN user: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc18

There is a wire that is linked here: https://supportforums.cisco.com/discussion/10798976/asa-email-logging-issue

Display the group name and group password

Hello

Can someone tell me the commands that will show you the group name and the password for the Group on a PIX 501 6.3 (4) running?

Thanks in advance! All the answers have been evaluated.

Hi Angel-Moon,

Hope you do well,

Here are some links that will help you to recover the key provided in advance of the running configuration configuration

The more command to decrypt the password does not support the old codes of PIX

The other way is to copy the configuration to a TFTP server running

http://www.Cisco.com/en/us/docs/security/PIX/pix63/command/reference/TZ.html#wp1027782

Link below will help you by specifying the TFTP server

http://www.Cisco.com/en/us/docs/security/PIX/pix63/command/reference/TZ.html#wp1026054

This issue is also addressed in thread below

https://supportforums.Cisco.com/message/885007

Let me know if you have any other questions

Concerning

Ashish

I have an active instagram account but I can't access despite the fact that my user name and password are correct.

* Original title: INSTAGRAM BETA

I have an active instagram account but I can't access despite the fact that my user name and password are correct.

How can I fix?

Help, please.

You will need to contact Instagram. We have no knowledge of their systems

L2l VPN and remote access VPN

Hello

I have 2 Cisco Pix (Pix1, Pix2) 515E (8.0.4). Between these devices exist VPN L2L, which are configured on the external interfaces. On Pix2 I configured remote access VPN on the external interface, too.

Is it possible to achieve LAN behind Pix1, by using remote access VPN on Pix2 then VPN L2L?

I don't want to set up remote access on Pix1.

Thank you very much.

Kind regards

Vladislav

NAT (outside) 1 140.40.30.0 255.255.255.0 (PAT for RA vpn to access the internet if you complete tunnel)

It is simply because I have configured tunnel RA as complete tunnel instead of split, nat (outside) 1 at the RA 140.40.30.0 pool have internet access through your firewall ASA_SITE_B and translate with global ID 1 who is your external interface of the firewall SA_SITE_B. This has nothing to do with what you are trying to accomplish, but I posted it because it was part of the very common scenario. There are some example PIX 6.3 cases where you will need split tunnel so that RA users have internet access not passing not through the encrypted tunnel code 6.0 does not feature of intra-interface support but 7.x above is of the code. Other examples are that some people configure split RA RA user tunnel will have access to their local resources in their homes as the printers network etc...

It is therefore, I need to translate 172.27.1.0/24 RA pool?

No there is no address translation in place in this scenario to work and you don't need to translate something too long, there is no of networks that overlap in one of the SITES u do not need to translate, this scenario is completely free sheep as you access lists free of nat in two firewalls for networks involved in communication in tunnels ASA_SITE_B.

Because I want to see IP addresses from PIX_SITE_A to 172.27.1.0/24, not 140.40.30.0/24. Is it possible to do it this way?

Im not clear on this issue, but if I think what it means, it's possible but you need to have political NATing but I think this will make complicated setup, I would say to make this as simple as possible.

Concerning

All helpful PLS rate valid if it helped

I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect. I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC. Any assistance

I tried in several ways (in line, calls and return on this forum), but no aid has been granted on Edge inspect. I get the message "your user name and password are incorrect, or your account has no access onboard inspect CC. Any help is greatly appreciated. One of my original case numbers were: 0216572509

You need installed Adobe Creative Cloud. Check the link for more information below.

Edge inspect FAQ EAC

I receive the "could not sign in you [access denied: 530]." Check your user name and password ' problem on Adobe Muse CC 2014 and I can not access the xml file that is supposed to solve this problem?

I am a PC user and I have Adobe Creative Cloud Muse 2014. I received the "could not sign in you [access denied: 530]." Check your username and password "error. trying to download my muse to my ftp, GoDaddy host site I did it successfully in the past and that recently it has stopped working. I looked online at the Adobe Muse Help FAQ | Download a Site from Muse Adobe on a third-party hosting service and he said to download the ftpprefs.xml file but this file simply leads to a blank page that says / * not found * / / * not found * /.
Can you direct me to a page to work with this file, or provide an alternative? Thank you!

Hello

As you have found the error [access denied: 530] This means that the problem is with access. The user name and password that you enter is incorrect or you don't have the appropriate permissions.

I suggest you to contact Godaddy to reset the password or reset the permissions.

Concerning

Vivek

Cisco Asa 5505 and level 3 with remote access VPN switch

Today I had a new CISCO LAYER 3 switch... So here's my scenrio

Cisco Asa 5505

I have

Outside of the == 155.155.155.x

Inside = 192.168.7.1

Address POOL VPN = 10.10.10.1 - 10.10.10.20

3 layer switch configuration

VLAN 2

ip address of the interface = 192.168.1.1

VLAN 2

ip address of the interface = 192.168.2.1

VLAN 2

ip address of 192.168.3.1 = interface

VLAN 2

ip address of the interface = 192.168.4.1

VLAN 2

ip address of the interface = 192.168.5.1

IP Routing

So I want the customers of my remote access VPN to access all that these networks. So please can you give me a useful tip or a link to set up the rest of my trip

Thanks to you all

Al ready has responded

Sent by Cisco Support technique iPad App

XDB user name and password to access the page configuration EPG on a pluggable database APEX

Hello
I have a base shared of the Oracle (12.1.0.2) 12.
I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).
Connected to the PDB, the registry says:
Name of the ID Version State
------------ ----------------------------------- ------------ ----------
APEX Oracle Application Express 5.0.0.00.31 VALID
I want to configure the EPG for this PDB.
I did the following (in this order):
(1) race: apex_epg_config.sql
(2) race: exec dbms_xdb.sethttpport (8080) - the firewall is open for this port
(3) race: change the anonymous user account unlock;
(4) run:
Start
() DBMS_NETWORK_ACL_ADMIN.append_host_ace
Home = > ' *',
As = > xs$ ace_type (privilege_list = > xs$ name_list ('connect'),)
principal_name = > "APEX_050000"
principal_type = > xs_acl.ptype_db));
end;
/
I find myself with the APEX-based users:
Account
Status of user name
------------------------- -------------------------
FLOWS_FILES EXPIRED & LOCKED
APEX_050000 EXPIRED & LOCKED
OPEN APEX_REST_PUBLIC_USER
OPEN ORDS_PUBLIC_USER
OPEN APEX_PUBLIC_USER
OPEN APEX_LISTENER
ORDPLUGINS EXPIRED & LOCKED
ORDDATA EXPIRED & LOCKED
ORDSYS EXPIRED & LOCKED
ANONYMOUS HAS EXPIRED
ORDS_METADATA EXPIRED & LOCKED
I used the documentation:
https://docs.Oracle.com/CD/E59726_01/install.50/e39144/EPG.htm#HTMIG386
When I run from the browser:
http:// < IP address of the server >: 8080/apex
I get the messge:
"APEX request a user name and password XDB"
Does someone has encountered this situation in a PDB file?
Thanks in advance for any information.
Thanks and greetings

Hi Patrick,

Laury wrote:

I have a base shared of the Oracle (12.1.0.2) 12.

I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).

I want to configure the EPG for this PDB.

I find myself with the APEX-based users:

Account

Status of user name

------------------------- -------------------------

ANONYMOUS HAS EXPIRED

The problem is the ANONYMOUS account has expired.

Reference: Re: XDB username and password

I think that this issue is addressed in your previous thread so: Oracle APEX server requires a user name and password of the server said XDB?

And here's the thread where Jason explained the reasons: Re: installation of the Apex (4.2.2 on 12 c)

Kind regards

Kiran

Configuring remote access VPN

Hi all

I need help with remote access vpn configuration. I want to some remote users who have access to the internet on their system to connect and access an application server in my seat social cisco vpn client user. I use Cisco 881. I am unable to use the SDM configuration because it seems that SDM is not supported by the router so I'm using command line. I'd appreciate any help I can get. Thank you.

This is the configuration I have:

VPNROUT #sho run
Building configuration...

Current configuration: 6832 bytes
!
! Last configuration change at 10:50:45 UTC Saturday, May 30, 2015, by thomas
version 15.2
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname VPNROUT
!
boot-start-marker
boot-end-marker
!
!
logging buffered 51200 warnings
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login userauthen1 local
AAA authorization groupauthor1 LAN
!
!
!
!
!
AAA - the id of the joint session
iomem 10 memory size
!
Crypto pki trustpoint TP-self-signed-1632305899
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1632305899
revocation checking no
rsakeypair TP-self-signed-1632305899
!
!
TP-self-signed-1632305899 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363332 33303538 6174652D 3939301E 170 3134 30313233 31323132
33325A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36333233 65642D
30353839 3930819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100BC0C 341CD79B A38572CE 1F0F9A91 F96B133C A889B564 E8352034 1CF5EE4B
B505616B 6014041B EC498C0A F6C5CD2B F5BF62DA BD6E1C44 0C7B9089 1FD0C6E5
299CEB40 28CD3F3B ADE3468A B07AAA9F AC42F0A7 4087172A 33C4013D 9A50884D
5778727E 53A4940E 6E622460 560C F597DD53 3B 261584 E45E8776 A848B73D 5252
92 50203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355 D
551 2304 18301680 14E85AD0 DEF133D8 E09516FD 0AA5FDAD E10EAB1A FA301D06
03551D0E E85AD0DE 04160414 F133D8E0 9516FD0A A5FDADE1 0EAB1AFA 300 D 0609
2A 864886 818100A 5 05050003 5B23ED5B 9A380E1F 467ABB03 BAB1070B F70D0101
7A 218377 73089DC1 D32DA585 C5FD7ECE 0D000F96 7F3AB6CC 71509E8F 3F1C55AE
E37536A3 1008FBF9 A29329D5 6F76DDC0 AA1C70AE 958AAE5D 32388BE4 2C1C6839
0369 D 533 027B612C 8D199C35 C008FE00 F7E1DF62 9C73E603 85C3240A 63611D 93
854A61E2 794F8EF5 DA535DCC B209DA
quit smoking
!
!
!
no record of conflict ip dhcp
DHCP excluded-address IP 10.10.10.1
DHCP excluded-address IP 172.20.0.1 172.20.0.50
!
DHCP IP CCP-pool
import all
Network 10.10.10.0 255.255.255.248
default router 10.10.10.1
Rental 2 0
!
IP dhcp pool 1
network 172.20.0.0 255.255.240.0
domain meogl.net
router by default - 172.20.0.1
172.20.0.4 DNS server 41.79.4.11 4.2.2.2 8.8.8.8
8 rental
!
!
!
no ip domain search
IP domain name meogl.net
name of the IP-server 172.20.0.4
name of the IP-server 41.79.4.11
IP-server names 4.2.2.2
8.8.8.8 IP name-server
IP cef
No ipv6 cef
!
!
license udi pid CISCO881-K9 sn FCZ1804C3SL
!
!
username secret privilege 15 thomas 4 JXSizd1r/hMqPpGz94vKBb5somtpZLy03k50rJvHO6c
username privilege 15 secret 4 mowe hlfv/rdDRCAeTUzRXbOIfdaKhJCl1onoGdaQeaQsAnw
!
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group moweclients
XXXXXXX key
DNS 172.20.0.4
meogl.net field
pool mowepool
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac moweset
tunnel mode
!
!
!
Dynmap crypto dynamic-map 1
Set transform-set moweset
market arriere-route
!
!
card crypto client mowemap of authentication list userauthen1
card crypto isakmp authorization list groupauthor1 mowemap
client configuration address card crypto mowemap answer
mowemap 1 card crypto ipsec-isakmp dynamic dynmap
!
!
!
!
!
interface Loopback0
IP 172.30.30.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
switchport access vlan 100
no ip address
!
interface FastEthernet3
no ip address
!
interface FastEthernet4
IP 41.7.8.13 255.255.255.252
NAT outside IP
IP virtual-reassembly in
intellectual property policy map route VPN-CLIENT
Shutdown
automatic duplex
automatic speed
mowemap card crypto
!
interface Vlan1
Description $ETH_LAN$
IP 10.10.10.1 255.255.255.248
IP tcp adjust-mss 1452
!
interface Vlan100
IP 172.20.0.1 255.255.240.0
IP nat inside
IP virtual-reassembly in
!
local pool IP 192.168.1.1 mowepool 192.168.1.100
IP forward-Protocol ND
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP nat inside source overload map route interface FastEthernet4 LAT
IP route 0.0.0.0 0.0.0.0 41.7.8.12
!
access-list 23 allow 10.10.10.0 0.0.0.7
access-list 23 allow 172.20.0.0 0.0.15.255
access-list 100 permit ip 172.20.0.0 0.0.15.255 everything
access-list 144 allow ip 192.168.1.0 0.0.0.255 any
not run cdp
!
LAT route map permit 1
corresponds to the IP 100
IP 41.7.8.12 jump according to the value
!
route VPN-CLIENT map permit 1
corresponds to the IP 144
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
!
!
end

Please the configuration above, give me the desired output.

Thank you.

Hello Thomas,.

I'm glad to hear that you have found useful in the example configuration.

I checked your configuration and everything seems ok with him, especially the statements of nat.
```
 ip local pool mowepool 192.168.1.1 192.168.1.100 access-list 100 deny ip 172.20.0.0 0.0.15.255 192.168.1.0 0.0.0.255 access-list 100 permit ip 172.20.0.0 0.0.15.255 any route-map LAT permit 1 match ip address 100 ip nat inside source route-map LAT interface FastEthernet4 overload interface Vlan100 ip address 172.20.0.1 255.255.240.0 ip nat inside ip virtual-reassembly in 
```
Try to generate ICMP traffic behind your 100 VLANS to the client VPN in order to answer the following questions:

-The router receives this traffic between VLAN100 unit?

-The router is encrypt this traffic, after receiving the ICMP packet?

#show crypto ipsec router its can help you with this question. Look for the program/decaps counters.

-The same, but the other way around (from VPN client to device behind VLAN100) try to locate the problem.

The following document explains more this crypto commands and debugs if necessary.

http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation-IKE-protocols/5409-IPSec-debug-00.html#iosdbgs

Configure ASA5055 as a remote access VPN client

Hello world

I'm trying to configure a 5505 as a remote access VPN client. I have several old hubs VPN 3002, but in the new sites I'll use a 5505 instead of these 3002.

I think that the configuration is very simple. I have the IP address of the peer (remote server), I know it is an IPsec tunnel without certificate and I have passwords and user name and group.

How can I translate this configuration for an ASA5505? I have attached a screenshot.

Here ya go:

http://www.Cisco.com/en/us/docs/security/ASA/asa83/configuration/guide/ezvpn505.html

Federico.

Remote access VPN group name and password

Similar Questions

Maybe you are looking for